I am facing a problem to build boost using visual studio 2019 command tool.
Below is the error :
Building Boost.Jam build engine
cl : Command line warning D9035 : option 'GZ' has been deprecated and will be removed in a future release
cl : Command line warning D9036 : use 'RTC1' instead of 'GZ'
cl : Command line warning D9002 : ignoring unknown option '/MLd'
Failed to build Boost.Jam build engine.
Please consult bjam.log for furter diagnostics.
You can try to obtain a prebuilt binary from
http://sf.net/project/showfiles.php?group_id=7586&package_id=72941
Also, you can file an issue at http://svn.boost.org
Please attach bjam.log in that case.
Related
I have made an Windows Application using visual c++[CLR Empty Project].But when I run that .exe file in another PC i get error of ucrtbased.dll, VCRUNTIME140D and MSVCP140D file is missing.
For this, we have changed the Runtime Library from Multi-threaded Debug DLL(/MDd) to Multi-threaded(/MT). Then also i am getting error like :-
Error : D8016 '/clr' and '/MT' command-line options are incompatible.
So, if any one have any idea to resolve this problem will be appreciated.
Thanks in advance !!!
I want to be able to build mysql-connector/c++ applications in debug mode (VS2k17), and understand the only way I can do that is to first build mysql-connector-cpp from source on my computer (Windows 10/64bit). I tried the following:
cmake . -DWITH_SSL=C:\Users\Rawb\source\libraries\OpenSSL-Win64
and it looks to complete successfully ...
Install location: C:/Users/Rawb/MySQL/MySQL Connector C++ 8.0
Connector libraries will be installed at: lib
-- Configuring done
-- Generating done
-- Build files have been written to: C:/Users/Rawb/source/repos/mcc2/mysql-connector-cpp
but when I run the following cmake build ...
cmake --build . --config
it fails with this output ...
LINK : fatal error LNK1104: cannot open file 'ssleay32.lib' [C:\Users\Rawb\source\repos\mcc2\mysql-connector-cpp\connector.vcxproj]
Done Building Project "C:\Users\Rawb\source\repos\mcc2\mysql-connector-cpp\connector.vcxproj" (default targets) -- FAILED.
Done Building Project "C:\Users\Rawb\source\repos\mcc2\mysql-connector-cpp\ALL_BUILD.vcxproj" (default targets) -- FAILED.
Build FAILED.
"C:\Users\Rawb\source\repos\mcc2\mysql-connector-cpp\ALL_BUILD.vcxproj" (default target) (1) ->
"C:\Users\Rawb\source\repos\mcc2\mysql-connector-cpp\connector.vcxproj" (default target) (10) ->
(Link target) ->
LINK : fatal error LNK1104: cannot open file 'ssleay32.lib' [C:\Users\Rawb\source\repos\mcc2\mysql-connector-cpp\connector.vcxproj]
0 Warning(s)
1 Error(s)
Time Elapsed 00:00:14.57
What might I be doing wrong? Do I just need to place the ssleay32.lib file somewhere? I do have a copy of it but not sure how it should be included. Or is it more complex? I.e. Do I need to build Open SSL first on my machine as well? This is a deep rabbit hole for me, I may be in over my head haha!
NOTE: I also asked this question on reddit with no luck, so hoping someone here might know.
If you're using MSVS (any version, including MSVS 2017), then I'd suggest using "NMake" (instead of cmake). Or just create a new C/C++ library project in the MSVS IDE.
The flag you're looking for is /LIBPATH. I don't think you need "-D", but you certainly need "/LIBPATH".
Here are the MSVS linker options:
https://learn.microsoft.com/en-us/cpp/build/reference/linker-options?view=vs-2017
Finally, you might be able to do all the troubleshooting/tracing you want without actually debugging (and rebuilding) the connector code.
Here's how to enable tracing in the MySQL Connector:
https://dev.mysql.com/doc/connector-cpp/1.1/en/connector-cpp-debug-tracing.html
Please let me know if this helps.
I tried to build mysql-connector-c++ from source to static library.
Referring the official spec here, I generated the Visual studio solution by the following command:
cmake -DMYSQL_DIR="E:\mysql-5.7.21-winx64" -DWITH_BOOST="E:\libs\boost_1_67_0_BUILDED" -DWITH_JDBC=ON -G "Visual Studio 15 2017 Win64" ../
Then, I opened the vs solution generated by cmake.Run build, got the two libs: mysqlcppconn8-static-mt.lib, mysqlcppconn-static-mt.lib, and copied them to my project.
When I built my project (also vs2017 version), I got the error:
mysqlcppconn-static-mt.lib(net_serv.obj) : error LNK2038: 检测到“_MSC_VER”的不匹配项: 值“1800”不匹配值“1900”(ActionProcessor.obj 中)
I am confused. They're all built in vs2017, and platform toolset are all set to "Visual Studio 2017 (v141)". I can't understand where 1800_MSC_VER has come from.
Here is what I did
Specs
Visual Studio 15, (2017)
x64
Static (.lib)
With static runtime (/MT)
Tools
CMAKE
Bison (In a folder without spaces)
Perl (ActiveState or Strawberry)
OpenSSL 1.0.2q.tar.gz
Add CMAKE, Bison and pearl to your system path
Check to see if you got all setup correctly
C:\>cmake --version
cmake version 3.9.6
C:\>bison --version
bison (GNU Bison) 2.4.1
C:\>m4 --version
m4 (GNU M4) 1.4.13
C:\>perl -version
This is perl 5, version 24, subversion 3 (v5.24.3)
Step 1: Build OpenSSL 1.0.x
Note: if you want to build OpenSSL 1.1.x steps will be a bit different
Extract to: C:\mysql-8.0.15\openssl-1.0.2q
Run: x64 Native Tools Command prompt for VS 2017
cd C:\mysql-8.0.15\openssl-1.0.2q
Release
perl Configure VC-WIN64A no-shared --openssldir=.\rel64
ms\do_win64a
nmake -f ms\nt.mak
nmake -f ms\nt.mak install
Debug
nmake -f ms\nt.mak clean
perl Configure debug-VC-WIN64A no-shared --openssldir=.\dbg64
ms\do_win64a
nmake -f ms\nt.mak
nmake -f ms\nt.mak install
Step 2: Build MySQL (Yes the actual database)
Extract to: C:\mysql-8.0.15
Run: x64 Native Tools Command prompt for VS 2017
cd C:\mysql-8.0.15\
cmake . -G "Visual Studio 15 2017 Win64" ^
-DWITH_BOOST=C:/mysql-8.0.15/boost ^
-DDOWNLOAD_BOOST=1 ^
-DBUILD_CONFIG=mysql_release ^
-DWITH_SSL=C:\mysql-8.0.15\openssl-1.0.2q\rel64 ^
-DLINK_STATIC_RUNTIME_LIBRARIES=1
Copy m4.exe to C:\mysql-8.0.15\sql\ this avoids any m4.exe errors during built
Open MySQL.sln and build for release x64
Copy binary_log_funcs.h and binary_log_types.h from mysql-8.0.15\libbinlogevents\export to mysql-8.0.15\include
The library should be located at:
Static release library: C:\mysql-8.0.15\archive_output_directory\Release\mysqlclient.lib
Step 3: Build MySQL Connector C++
Copy C:\mysql-8.0.15-dbg\archive_output_directory\Debug\mysqlclient.lib
to C:\mysql-8.0.15-dbg\lib\vs14
Run CMAKE GUI
Browse to the path of the MySQL Connector Project.
Click Configure, Select Visual studio 15 2017 Win64, native compilers
Tick BUILD_STATIC
Tick STATIC_MSVCRT
TICK WITH_JDBC
remove WIN_SSL_YASL from CONFIG_VARS
WITH_SSL = C:\mysql-8.0.15\openssl-1.0.2q\rel64
WITH_BOOST= C:\mysql-8.0.15\boost\boost_1_66_0
MYSQL_DIR=C:\mysql-8.0.15
Open MySQL_CONCPP.sln build for Release x64
The library is located at:
C:\mysql-connector-c++-8.0.15\jdbc\install\lib\mysqlcppconn-static-mt.lib
C:\mysql-connector-c++-8.0.15\Release\mysqlcppconn8-static-mt.lib
Step 4: Test it
Note: This test is for the JDBC style API. If you are not maintaining an existing application, use the new xdevapi API.
Create a new project and put the following in main.cpp
#define WIN32_LEAN_AND_MEAN
#include <Windows.h>
#define STATIC_CONCPP
#define CONCPP_BUILD_STATIC
#define CPPCONN_PUBLIC_FUNC
#include <driver.h>
#include <connection.h>
#include <statement.h>
#include <exception.h>
sql::Driver *mDriver;
sql::Connection *mConnection;
int main() {
mDriver = get_driver_instance(); //or use: new MySQL_Driver()
try {
mConnection = mDriver->connect("host", "username", "password");
mConnection->close();
}catch(sql::SQLException& ex) {
std::cout << ex.what();
}
delete mConnection;
return 0;
}
Set: Linker > Input > Additional Dependecies:
libeay32.lib;mysqlclient.lib;mysqlcppconn8-static-mt.lib;mysqlcppconn-static-mt.lib;ssleay32.lib;%(AdditionalDependencies)
Set: Configuration Properties > VC++ Directories
Include Directories.
Library Directories.
I don't even know where to start explaining to be honest. Building this was a massive pain.
Before you begin to read this, please ensure you have the following:
C:\boost
C:\OpenSSL-Win32
C:\OpenSSL-Win64
Because I was writing my own "wrapper" and trying to make UNICODE work properly, I was getting weird exceptions, and I was unable to debug anything because I downloaded the latest package which is built without debug information (https://dev.mysql.com/downloads/connector/cpp/)
This is the first time I try to build this, so I went to their Github repository and grabbed the latest "master": https://github.com/mysql/mysql-connector-cpp
BUT! This does not contain the "JDBC" sources, which is by the way the "native" connector as they call it. So I grabbed it from the branch: https://github.com/mysql/mysql-connector-cpp/tree/jdbc and then copied the files into "mysql-connector-cpp-master\jdbc".
OK. I opened "x64 Native Tools Command Prompt for VS 2017" and navigated to "mysql-connector-cpp-master". At this point I still had no idea what I am doing and how to build it, all I could understand from the docs and different articles here is to run:
cmake -DWITH_JDBC=ON --build .
This started to configure things and build OK, but it stopped here:
-- Searching for static libraries with the base name(s) "mysqlclient"
CMake Error at FindMySQL.cmake:524 (message):
Could not find "mysql.h" from searching "/usr/include/mysql
/usr/local/include/mysql /opt/mysql/mysql/include
/opt/mysql/mysql/include/mysql /usr/local/mysql/include
/usr/local/mysql/include/mysql C:\Program Files/MySQL/*/include
C:/MySQL/*/include"
Call Stack (most recent call first):
CMakeLists.txt:332 (INCLUDE)
OK. So what now... where is "mysql.h" ?! After searching... and searching, I found this: Missing mysql.h and trying to find mysql-devel
And I quote:
Grab the MySQL Community Server and install it on your system. It
contains a directory called include in which you find the mysql.h.
Ok, great we need more stuff. So I download: https://dev.mysql.com/downloads/mysql/ and run the command again.
Happy days, something happened but no libs yet. I did get however a VS 2017 solution called: "MYSQLCPPCONN.sln".
This contains VS 2017 configuration to build the library for Win32. And of course trying to build with this solution will give you A LOT of unresolved external symbols.
So I run again the cmake but with static option added:
cmake -DWITH_JDBC=ON -DBUILD_STATIC=ON --build .
This time when I open "MYSQLCPPCONN.sln" I can see another project "mysqlcppconn-static" and this builds fine without issues.
However, in my case I need x64. I just created a new configuration for x64 by copying the exiting configuration fron Win32.
So that's it, I have both Win32 and x64 "mysqlcppconn-static.lib".
Overall Conclusion at this time:
Quite hard to build, without experience you will spend some time...
time.
No proper documentation, their existing documentation is poorly
written and very confusing.
No UNICODE support, yes the projects compile as Multi-Byte
Character Set.
I will see if I can debug and find out why am I getting exceptions in the library when using this (from their documentation):
sql::ConnectOptionsMap connection_properties;
connection_properties["hostName"] = "";
connection_properties["port"] = "";
connection_properties["userName"] = "";
connection_properties["password"] = "";
connection_properties["schema"] = "";
connection_properties["OPT_CONNECT_TIMEOUT"] = 10;
connection_properties["CLIENT_MULTI_STATEMENTS"] = (true);
connection_properties["OPT_CHARSET_NAME"] = "utf8";
connection_properties["OPT_SET_CHARSET_NAME"] = "utf8";
I hope you can build your library with this information, and hopefully in the future it will become more easier and clear.
Good Luck.
I have been following the instructions in the OpenSSL User Guide, which links to a guide by 3noch for compiling OpenSSL. Here are the tools/versions I am using:
ActiveState Perl v5.20.2
Microsoft Visual Studio 2012
Netwide Assembler (NASM) v2.12.02
OpenSSL 1.0.2j (source tarball)
Following the instructions, I am able to execute the following commands without issue:
perl Configure VC-WIN32 --prefix=C:\Build-OpenSSL-VC-32
ms\do_ms
Then, when I go on to execute
nmake -f ms\nt.mak
I receive the following
Assembling: tmp32\sha1-586.asm
tmp32\sha1-586.asm(1432) : error A2070:invalid instruction operands
tmp32\sha1-586.asm(1576) : error A2070:invalid instruction operands
NMAKE : fatal error U1077: '"C:\Program Files (x86)\Microsoft Visual Studio 11.0
\VC\BIN\ml.EXE"' : return code '0x1'
Stop.
After looking into that issue, I found a blog post by HostageBrain that mentions that exact error, stating to use nasm to perform the compiling. So, I switched to this command sequence:
perl Configure VC-WIN32 --prefix=C:\Build-OpenSSL-VC-32
ms\do_nasm
nmake -f ms\nt.mak
However, once switching to the NASM variation, I receive the following errors:
tmp32\sha1-586.asm:1: error: parser: instruction expected
tmp32\sha1-586.asm:2: error: parser: instruction expected
tmp32\sha1-586.asm:3: error: parser: instruction expected
tmp32\sha1-586.asm:4: warning: label alone on a line without a colon might be in error
tmp32\sha1-586.asm:5: warning: label alone on a line without a colon might be in error
tmp32\sha1-586.asm:6: warning: label alone on a line without a colon might be in error
tmp32\sha1-586.asm:7: error: symbol `IF' redefined
tmp32\sha1-586.asm:7: error: parser: instruction expected
tmp32\sha1-586.asm:8: error: parser: instruction expected
tmp32\sha1-586.asm:9: error: comma expected after operand 1
What I am looking for is to be able to compile OpenSSL into .lib files that I can then link to from other C++ projects, such as when compiling FreeTDS.
On the same my blog page which you refer I also describe 'no-asm' case - this case is simpler for compiling (it won't require nasm at all), but drawback is - some algorithms performance will be 2x-4x slower than assembler versions.
If your case can accept this performance - try to compile 'no-asm' case.
perl Configure VC-WIN32 no-asm --prefix=C:\Build-OpenSSL-VC-32
I built the library from a regular command prompt on Windows 10 with VS 2015 with the following commands (debug build shown):
"C:\Program Files (x86)\Microsoft Visual Studio 14.0\VC\bin\amd64\vcvars64.bat"
perl Configure debug-VC-WIN64A --prefix=C:\Path\to\target\folder
ms\do_win64a
nmake -f ms\ntdll.mak
cd out32dll.dbg
..\ms\test
cd ..
nmake -f ms\ntdll.mak install
I know this is an old post, but for others having the problem with NASM parsing errors, here's the solution:
Once you run either ms\do_ms.bat (to use masm) or ms\do_nasm.bat (to use nasm), you can't just switch to the other one without first clearing out the tmp32 directory, otherwise perl will never regenerate the .asm files correctly. The parser errors you're getting are from nasm trying to assemble a masm-formatted file.
The easiest way to clean out tmp32 is to run "nmake -f ms\nt.mak clean".
Answering to this very old question. There are a couple of problems associated with building it under x64 that way including hitting "assemblers not found", downloading NASM and adding to path etc. There is a very good and simple solution using MSYS2.
Install MSYS2. Ensure you get the toolchain needed (see the guide for pacman). Then follow below steps
$Launch msys2_shell.cmd -mingw64
$wget -c ftp://ftp.pca.dfn.de/pub/tools/net/openssl/source/openssl-1.0.2o.tar.gz
$tar -xzvf openssl-1.0.2o.tar.gz openssl-1.0.2o/
$cd openssl-1.0.2o/
$./configure shared mingw64
$make
That's it. In apps directory you will get openssl executable along with the libraries.
-Sreejith. D. Menon
I would appreciate if i can get some help in solving this issue for which i have been looking for information for over 2 days through various forums. Crying or Very sad Crying or Very sad
I have installed Infosphere Datastage v8.5 on windows environment for testing and have run a couple of jobs, but when i run a job containing a transformer i get compilation error.
Job: Row generator -> Tfx -> Sequential File
Based on my search through various forums i find that Similar issue has been faced by others as well.But i am unable to find a concrete answer regarding the following:
1. A Compiler that i need to install and the related SDK that needs to be installed along with it
2. or A combined pack that has both compiler+SDK
The Installation Guide talks about Microsoft Visual Studio .NET 2008 Express Edition C++: but does not mention which is the associated SDK that needs to be installed ?
or is there a newer version of C++ compiler+SDK that will work on my environment
My Environment Details:
OS - Windows Server 2008 R2(Standard) SP1 - 64 bit
IIS - Infosphere Information Server v8.5 64bit Multilingual
--================
.Net framework
--================
Microsoft .Net framework 1.1
Microsoft .Net framework 4 Client Profile
Microsoft .Net framework 4 Extended
--=====
SDK
--=====
Microsoft Windows SDK for Windows 7 and .NET Framework 3.5 SP1
This SDK created 2 directories path , which are as follows:
C:\Program Files\Microsoft SDKs
C:\Program Files (x86)\Microsoft Visual Studio 9.0
Windows Environment Variables:
INCLUDE - C:\IBM\SQLLIB\INCLUDE;C:\IBM\SQLLIB\LIB;C:\Program Files\Microsoft SDKs\Windows\v7.0\Include
LIB - C:\Program Files\Microsoft SDKs\Windows\v7.0\Lib;C:\IBM\SQLLIB\LIB
CLASSPATH - .;C:\IBM\SQLLIB\java\db2java.zip;C:\IBM\SQLLIB\java\db2jcc.jar;C:\IBM\SQLLIB\java\sqlj.zip;
C:\IBM\SQLLIB\java\db2jcc_license_cu.jar;C:\IBM\SQLLIB\bin;C:\IBM\SQLLIB\java\common.jar
Path - C:\IBM\InformationServer\Server\DSComponents\bin;C:\Program Files (x86)\MKS Toolkit\mksnt;C:\PROGRA~2\MKSTOO~1\bin64;C:\PROGRA~2\MKSTOO~1\bin;
C:\PROGRA~2\MKSTOO~1\bin\X11;C:\PROGRA~2\MKSTOO~1\mksnt;C:\IBM\InformationServer\ASBNode\apps\jre\bin\classic;C:\IBM\InformationServer\ASBNode\lib\cpp;
C:\IBM\InformationServer\ASBNode\apps\proxy\cpp\vc60\MT_dll\bin;%systemroot%\system32;%systemroot%;
%systemroot%\system32\wbem;%systemroot%\system32\windowspowershell\v1.0\;c:\program files (x86)\microsoft visual studio 9.0\vc\bin;
c:\program files (x86)\microsoft visual studio 9.0\common7\ide;c:\program files\ibm\gsk8\lib64;C:\IBM\SQLLIB\BIN;C:\IBM\SQLLIB\FUNCTION;
C:\IBM\SQLLIB\SAMPLES\REPL;C:\Windows/SysWOW64
Compiler information from windows command prompt:
c:\Users\skh>cl.exe
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 15.00.30729.01 for 80x86
Copyright (C) Microsoft Corporation. All rights reserved.
usage: cl [ option... ] filename... [ /link linkoption... ]
Datastage Environment Variables:
APT_COMPILEOPT (old): -W/TP -W/EHa -DAPT_USE_ANSI_IOSTREAMS -c -W/Zc:wchar_t-
APT_COMPILEOPT (new): -W/TP -W/EHa -DAPT_USE_ANSI_IOSTREAMS -c
APT_LINKOPT(old): -s -W/dll -W/base:0x50000000 -W/Zc:wchar_t-
APT_LINKOPT(new): -s -W/dll -W/base:0x50000000
The (old) represent the default values that DS Environment variables had. I ran my job which had a transformer but i got the compilation error.
I changed the Environment variable values to what is stated in (new), still i get the compilation error mentioned below
Output from transformer compilation follows:
I IIS-DSEE-TFCN-00001 12:55:36(000)
IBM WebSphere DataStage Enterprise Edition 8.5.0.5746
Copyright (c) 2001, 2005-2008 IBM Corporation. All rights reserved
##I IIS-DSEE-TFCN-00006 12:55:36(001) <main_program> conductor uname: -s=Windows_NT; -r=1; -v=6; -n=IN-MUM-IBMQLT; -m=Pentium
##I IIS-DSEE-TOSH-00002 12:55:36(002) <main_program> orchgeneral: loaded
##I IIS-DSEE-TOSH-00002 12:55:36(003) <main_program> orchsort: loaded
##I IIS-DSEE-TOSH-00002 12:55:36(004) <main_program> orchstats: loaded
##W IIS-DSEE-TOSH-00049 12:55:36(007) <main_program> Parameter specified but not used in flow: DSPXWorkingDir
##E IIS-DSEE-TBLD-00076 12:55:39(000) <main_program> Error when checking composite operator: Subprocess command failed with exit status 256.
##E IIS-DSEE-TFSR-00019 12:55:39(001) <main_program> Could not check all operators because of previous error(s)
##W IIS-DSEE-TFTM-00012 12:55:39(002) <transform> Error when checking composite operator: The number of reject datasets "0" is less than the number of input datasets "1".
##I IIS-DSEE-TBLD-00000 12:55:39(003) <main_program> Error when checking composite operator: Output from subprocess: cl : Command line warning D9035 : option 'GX' has been deprecated and will be removed in a future release
cl : Command line warning D9036 : use 'EHsc' instead of 'GX'
cl : Command line warning D9025 : overriding '/GX' with '/EHa'
##I IIS-DSEE-TBLD-00000 12:55:39(004) <main_program> Error when checking composite operator: Output from subprocess: C:\IBM\InformationServer\Server\PXEngine\include\apt_util/ints.h(83) : fatal error C1083: Cannot open include file: 'strstream': No such file or directory
##W IIS-DSEE-TFEV-00025 12:55:39(005) <transform> Error when checking composite operator: Converting string to number.
##W IIS-DSEE-TFEV-00023 12:55:39(006) <transform> Error when checking composite operator: Implicit conversion from source type "String" to result type "DFloat".
##W IIS-DSEE-TFEV-00025 12:55:39(007) <transform> Error when checking composite operator: Converting number to string.
##W IIS-DSEE-TFEV-00023 12:55:39(008) <transform> Error when checking composite operator: Implicit conversion from source type "DFloat" to result type "String".
##W IIS-DSEE-TBLD-00000 12:55:39(009) <main_program> Error when checking composite operator: Output from subprocess: ld: script execution error in file 'C:/PROGRA~2/MKSTOO~1/etc/nutccg/ld.ccg' on line 1119
>>> execv: could not run 'link32': The system cannot find the file specified.
##I IIS-DSEE-TBLD-00079 12:55:39(010) <transform> Error when checking composite operator: cxx -LC:/IBM/InformationServer/Server/Projects/PRJ_QSPOC/RT_BP2.O/ -LC:/IBM/InformationServer/Server/PXEngine/lib -LC:/IBM/InformationServer/Server/PXEngine/user_lib -s -W/dll -W/base:0x50000000 -lliborchnt -lliborchcorent -lliborchbuildopnt C:/IBM/InformationServer/Server/Projects/PRJ_QSPOC/RT_BP2.O/V0S3_TestJob_Tfx_Transformer.tmp.o -o C:/IBM/InformationServer/Server/Projects/PRJ_QSPOC/RT_BP2.O/V0S3_TestJob_Tfx_Transformer.dll.
##E IIS-DSEE-TCOS-00029 12:55:39(011) <main_program> Creation of a step finished with status = FAILED. (TestJob_Tfx.Transformer)
*** Internal Generated Transformer Code follows:
0001: //
0002: // Generated file to implement the V0S3_TestJob_Tfx_Transformer transform operator.
0003: //
0004:
0005: // define our input/output link names
0006: inputname 0 DSLink2;
0007: outputname 0 DSLink5;
0008:
0009: initialize {
0010: // define our control variables
0011: int8 RowRejected0;
0012: int8 NullSetVar0;
0013:
0014: }
0015:
0016: mainloop {
0017:
0018: // declare our intermediate variables for this section
0019: dfloat InterVar0_0;
0020:
0021: // initialise the rejected row variable
0022: RowRejected0 = 1;
0023:
0024: // evaluate columns (no constraints) for link: DSLink5
0025: InterVar0_0 = DSLink2.Dummy1;
0026: DSLink5.Dummy1 = (InterVar0_0 + 5);
0027: writerecord 0;
0028: RowRejected0 = 0;
0029: }
0030:
0031: finish {
0032: }
0033:
*** End of Internal Generated Transformer Code
This is how i went about fixing it. I hope this helps people facing similar problems and saves some time and effort.
so , here it goes :
I installed Visual Studio C++ 2008 Express Edition.
I then worked around vcvarsall.bat file .if you are wondering why , please check
(
http://msdn.microsoft.com/en-us/library/x4d2c09s(v=vs.80).aspx )
and
Errors while building/installing C module for Python 2.7
)
I executed the following from the cmd window, to set the 64 bit compiler:
vcvarsall.bat amd64
NOTE: my environment has a X64 AMD chipset windows server;I used echo %PROCESSOR_ARCHITECTURE% , from cmd window to determine this.
To cross check which compiler is set, execute the following and the output would indicate.
cl.exe
Next , set the following windows system variables:
INCLUDE - C:\IBM\SQLLIB\INCLUDE;C:\IBM\SQLLIB\LIB; C:\Program Files\Microsoft SDKs\Windows\v6.0A\Include
LIB - C:\Program Files\Microsoft SDKs\Windows\v6.0A\Lib ;C:\IBM\SQLLIB\LIB
Note:-
The folder path C:\Program Files\Microsoft SDKs\Windows\v6.0A is created by the Visual Studio C++ 2008 Express Edition. This should be the source for folder paths that are set for INCLUDE & LIB
There is a similar path that the SDK creates C:\Program Files\Microsoft SDKs\Windows\v7.0\ , but Include and Lib folder from this path should not be used to set the above mentioned Windows Environment variables , I made this mistake during my set up :(
for reference please check the Release Note of the SDK that is to be installed.
Set the following Datastage ENV variable,from the Administrator, to values below.
APT_COMPILEOPT : -W/TP -W/EHa -DAPT_USE_ANSI_IOSTREAMS -c -W/Zc:wchar_t-
APT_LINKOPT : -s -W/dll -W/base:0x50000000 -W/Zc:wchar_t-
I then restarted the Datastage services.
.. and the transformers started to work :)
PS : I did not uninstall Information Server nor the SDK (which i initially presumed was the problem)