It`s difficult to explain, better see images below.
When clicking within any part of empty line, cursor stays where I clicked:
And how it should behave:
Small notice, before updating it behaved normally, but after it changed.
Check what you have got here: Settings/Preferences | Editor | General. Make sure that Allow caret placement | After the end of line option is disabled.
I'm having this super annoying behavior with WebStorm. Every word I type and press space turns into a tag.
How do I stop this behavior?
You must have Space specified as a key used to expand Emmet abbreviations. Please check Preferences | Editor | Emmet, Expand abbreviation with and Preferences | Editor | Live Templates, By default expand with options values
I have the following line in a file I'm editing in VSCode:
...............111.........111.............111..
I want to replace all .s with 0s. However, when I highlight the line and do a find/replace for .s, all the .s in the document are replaced, not just the ones in the line I've select, even when I toggle the "Find in selection" button. Is this a bug? In other editors, if I select a chunk of text and then do a find/replace, it will only find/replace matches within the selected block.
Below is a snippet that you should be able to reproduce the issue with. The ...............111.........111.............111.. line is inside the test_unicode function.
def test_simple2(self):
"""Simple CSV transduction test with empty fields, more complex idx, different pack_size.
100011000001000 ->
..........111....................111..........11111..........111..
"""
field_width_stream = pablo.BitStream(int('1000110001000001000', 2))
idx_marker_stream = pablo.BitStream(int('11101', 2))
pack_size = 4
target_format = TransductionTarget.JSON
csv_column_names = ["col1", "col2", "col3", "col4", "col5"]
pdep_marker_stream = pablo.BitStream(generate_pdep_stream(field_width_stream,
idx_marker_stream,
pack_size, target_format,
csv_column_names))
self.assertEqual(pdep_marker_stream.value, 63050402300395548)
def test_unicode(self):
"""Non-ascii column names.
Using UTF8. Hard coded SON boilerplate byte size should remain the same, column name
boilerplate bytes should expand.
100010010000000 ->
2 + 4 + 9 2 + 4 + 6 2 + 4 + 7
...............111.........111.............111..
"""
field_width_stream = pablo.BitStream(int('100010001000', 2))
idx_marker_stream = pablo.BitStream(1)
pack_size = 64
target_format = TransductionTarget.JSON
csv_column_names = ["한국어", "中文", "English"]
pdep_marker_stream = pablo.BitStream(generate_pdep_stream(field_width_stream,
idx_marker_stream,
pack_size, target_format,
csv_column_names))
self.assertEqual(pdep_marker_stream.value, 1879277596)
I'm using VSCode 1.12.2 in Ubuntu 16.04.
I was able to get it to work but the workflow is poor:
control + H to open Find/Replace
Select your line of text
Click the "Find in selection" icon to the right Alt L or ⎇ ⌘ L on macOS)
Enter your find and replace characters in their inputs
Click the Replace all icon
It works but you have to go through the workflow all over again for each new selection (except for CTR + H of course). BTW I have the exact same behavior in Sublime Text.
Could you go with a regExp to find your lines? Do they contain only .'s and 1's?
This is a more general answer for other users who come here just wanting to use basic find and replace functionality.
On Mac you can press Command + Option + F to open Find and Replace:
Alternatively, you can press Command + F to open Find and then click the little triangle on the left to show the Replace field:
From the VSCode devs:
We used to enable find in selection automatically when opening the
find widget with a selection, but it was too easy to trigger
accidentally and produced a lot of complaints. You probably want to
set "editor.find.autoFindInSelection": true which will make it work
the way you expect.
The VSCode GitHub issue has more details if anyone is interested.
EDIT: The autoFindInSelection option is available starting from VSCode 1.13. That version is currently in development (as of 6/7/2017), so this fix won't work until the new version is released.
I found the following workflow to be fairly painless:
Select text region with mouse or keyboard.
Ctrl+H to toggle find and replace
Alt+L to toggle find in selection
Ctrl+Alt+Enter to replace all (or enter to replace individually)
Since sometimes we might have similarly named things so you don't want to select everything, one of my favorites shortcut sequences is to select the next occurrence:
Use shift and arrows to highlight the term you want to match.
Use Ctrl + d to highlight the next occurrence of the term.
The Basic Editing in VS Code documentation page has some extremely useful variations on find and replace. One extremely useful shortcut is the Column (Box) Selection.
Just ran into this, my solution was to do
command + N to create a new file
paste my selection in there
do my find and replace operations on that while file
copy result back on top of my original selection
On Mac:
Select the text
Press command + shift + L
For mac
Press command + option + f to bring up this menu:
Press the little icon that has the arrow pointing at it above (3 horizontal bars)
Select the text you want to do a find and replace in, and enter the 'find' and 'replace' fields
Press this icon:
That's all!
In 2022, there's a bug to be wary of 🐛
There is a silent bug (I'll add more about this as I learn more about it). But sometimes find and replace within selection doesn't find the values, even if you can see them with your own eyes. This is dangerous because you could think you've replaced them all but it really hasn't.
So do these two things:
a visual check after doing a find and replace (to make sure it worked)
if vscode completely ignores you (and doesn't do the find and replace within selection after you've followed the above instructions), close the find and replace box by pressing the "x" in the corner, and retry the sequence of steps (it worked for me after closing and retrying).
Okay, this is really dumb, at first I felt really stupid when I finally found this, then I realized its just VS Code which has a bad interface.
The key is, there are TWO TOOLS here,
Search/Replace (the pane on the left at the top of the Explorer) and Find/Replace (which is a dialogue which opens when you press CTRL-F)
THESE ARE NOT THE SAME TOOL!!
SEARCH-REPLACE is a tool written for project-wide searches and
changes
FIND-REPLACE is a small dialogue best suited for more
surgical editing.
i.e. you should use FIND-REPLACE!
find replace window image with find-in-selection highlighted
Also, its SUPER IMPORTANT to follow these steps in the right order, or it doesn't give the expected results.
Press CTRL-F to open the find dialogue (usually opens in the top right)
press the little arrow to the right of the find field which opens the replace input field
ensure "find in selection" is turned off (i.e. not highlighted)
type in the fields the strings you want to search/replace
select the text you want to do a search/replace within.
Now press "find in selection" (or type ALT-L)
You should see only highlighting in the area you previously selected.
Now you can click either "replace all" (CTRL-ALT-ENTER) or line-by-line "replace" (ENTER)
I hope this helps.
My suggestion to VSC developers, there should be a refresh button so that after you have selected the area of interest, and you already have your find and replace strings defined, you can select a new region and click "refresh find" instead of needing to repeat steps 3 to 8.
For those where it still does not work, there is one step omitted in all of the above answers: Uncheck "Find in selection" if it is checked (which it probably is when you are struggling with it and in despair googled the problem, and then found this SO entry). Only then select the lines and then re-check "Find in selection".
For Ubuntu, highlight the lines where you want to make changes, press alt-L and then ctrl-H. Then type the name you want to replace and replacement name in the top right dropdown.
Or some combination of these actions depending on whether the dropdown is already open or you're already in alt-L mode. I'm still learning but thought I'd share what's working.
I've noticed that every now and then I've missed a semicolon. I found out its because the indicator that WebStorm shows when a semicolon is missing does not appear for the last line of a code block. For example:
But later if you adjust the code block and add more lines it becomes invalid:
How can I get WebStorm to always show the missing semicolon indicator so I can catch it while I'm writing the same line? I already have "Settings > Editor > Code Style > JavaScript > Other > Use semicolon to terminate statements" enabled.
Warnings/Notices are detected by inspections while Code Style is used for code formatting (automatic (when you code) or on demand).
If you want to rely on your code style settings alone then I would suggest to use Ctrl + Shift + Enter to complete your statements.
As for actual inspection: Settings/Preferences | Editor | Inspections | JavaScript | Code style issues | Unterminated statement -- it has special option that affects last statement in the block.
While editing JavaScript, I'd like to select a phrase in the code and wrap it with braces.
In Sublime Text for example, the default behavior is when I hit the [ key with a piece_of_text selected, it gets converted to [piece_of_text]. However in Webstorm it turns into [].
How do I change this behavior?
Please make sure that Surround selection on typing quote or brace option is enabled in Settings/Preferences | Editor | General | Smart Keys.