I tried do install NeurophStudio on Win 10, but when i try to run it i got this message
I installed this program on my hard drive, but my windows is installed on my SSD.
How can i change --jdkhome destination on NeurophStudio, because i didnt install any NetBeans?
What do i need to run to enter that --jdkhome instrunction, and how to I enter my path like C:\bla\bla\jdk12 or C:/bla/bla/jdk12
UPDATE:
I tried installing it on my SSD, but same result as before.
When i run javac --version in cmd, i get this:
I have java jkd path in JAVA_HOME aswell:
In windows try this: (Works for some people)
First install latest version
https://www.oracle.com/java/technologies/javase-downloads.html
Find the instalation Neuroph Studio folder and when look for a neurophstudio\etc\neurophstudio.conf file.
Open it with e.g notepad++ and search this property#jdkhome="/usr/local/java/jdk1.8.0_20"
Update it for your actual path like this jdkhome="C:\Program Files\Java\jdk-15.0.1" and remove #.
Save and exit.
If this solution remove initial error messege box, but program after launch quit immediately probably you didn't update your JDK (latest version).
It says it can't find the JDK, but it's actually looking for the JRE. Install that, and you should be good.
Related
I'm new to programming and I'm trying to set up C and C++,
I have the C/C++ extension pack installed and enabled on VScode,
I have mysys64 installed on the C:\ drive,
I added the Mingw-w64 destination folder path, with \mingw64\bin appended, to the system path in Edit environment variables for your account (windows settings).
The problem is that I can't run the g++ compiler (checking the version also doesn't run) and I'm very sure the address at system path is correct because I've checked it more than 6 times and I've also followed every single step on https://code.visualstudio.com/docs/languages/cpp until Check your MinGW installation (because it doesn't work).
The error messages I get are:
Command 'g++' not found, but can be installed with: sudo apt install g++,
and when I try: "Build Hello World" on https://code.visualstudio.com/docs/languages/cpp
I get:
/image/
Notes:
I run Windows 10 Pro, version: 21H2, OS build: 19044.1826
I already had WSL(ubuntu) installed before mysys64
Edit: I used a different machine and followed the same steps, it works there now. Looks like the problem is with the machine
Install WSL extension in VSCode, run VSCode from WSL (WSL2 better because its faster), then install g++ (sudo apt install g++) from WSL; MingW is evil :)
As title,
Build successful, but the exe can't run. can not found msvcr100.dll.
I can put msvcr100.dll with exe in the same dir, the exe can run.
But I just want only one exe file.
Anyone know how to do?
Has solved. This is a bug of pyinstaller3.2, the new in the git has solved this bug. Down the newest source in the github, erverything works fine.
Has solved. This is a bug of pyinstaller3.2, the new one in the git has solved this bug. Down the newest source in the GitHub, everything works fine.
This is correct, I cant tell you how much that answer helped me out. I have been trying to build a single exe Exploit to execute on Windows XP with-out it crashing for my OSCP Labs/Exam. I followed so many tutorials and nothing seems to work. I was able to build the EXE but could not get it to run under a single EXE.
If anyone who reads this is getting "This Program cannot be run in DOS mode" try running it from another machine with the same build (Windows XP). There is not much info out there on how to solve that from a Reverse Shell on a End Of Life Operating System using an EXE exploit built with Pyinstaller. (Lots of Trial and Error and determination)
Microsoft Visual C++ 2008 Redistributable Package (or some other version depending on python version) is needed in any case, python27.dll requires it
I was also receiving an error about msvcr100.dll when ran from the GUI on my build machine(WinXP SP2). This is corrected in the 3.3 Dev version on GitHub.
I installed the C++ 2008 Package but this didn't solve my problem when I re-built the EXE, the 3.3 Dev Pyinstaller was the solution.
What I did was:
Zip down the Dev version of Pyinstaller 3.3 Dev(GitHub) is the newest for 11/14/16 that I could tell. Make sure you have Python 2.7.x (I used 2.7.11) and pywin32 installed that matches (Python 2.7.x) version. (And it does matter if its 64-bit or 32-bit) Use the setup.py to install Pyinstaller, make sure you do not have a previous version already installed, if so use pip or etc. to remove. I installed with pip first and this was my whole issue.
I was able to get all of my 32-bit Single EXE Exploits to run on 64-bit/32-bit Windows machines up to Windows 10.
Once that is completed, make sure Pyinstaller is in your $PATH and follow the standard tutorials on creating a --onefile EXE. Copy to your Windows Target machine and it should work with-out error. I did not need to pull any dependencies over but you may have to include some with the --hidden command. Its greatly detailed in the Pyinstaller documentation on how to include hidden .dlls
If this still doesn't work for you try using py2exe. Its a little more complicated but it your determined you will figure it out.
If you have code written in python 2.x.x and 3.x.x you can have multiple environments of Python and have Pyinstaller installed in each. This is in the documentation as well.
Thank you jim ying. Your 2 sentence answer was exactly what I needed.
Does anyone know how to uninstall SlamData on a Linux system (Centos 7)? I would like to completely remove it from the server. I looked through the documentation but could not find anything on uninstallation.
Thanks,
On Linux, you can uninstall SlamData simply by removing the directory you specified during the initial installation. By default it ends up being
/home/username/SlamData version
There is also a configuration directory and file you can delete located at
/home/username/.config/quasar/quasar-config.json
I just installed Ubuntu 12.10, and I tried to install Eclipse and C++, but I failed miserably.
I started with an installation from the Software Center, Eclipse worked, but only in Java. Then I started googling for installation guides and tutorials, but after hours of downloads and installations, the C++ in Eclipse still doesn't work.
So now I have two questions:
How do I clean up this mess?
Actually, how do I know if there is a mess?
According to the Ubuntu Software Center, Eclipse is installed and has three add-ons.
How do I know if the other installations of other Eclipse versions/packagings overwrote each other or if I have multiple installations?
How do I install the latest version of Eclipse and C++ in Ubuntu 12.10?
There is a package called eclipse-cdt in the Ubuntu 12.10 repositories, this is what you want. If you haven't got g++ already, you need to install that as well, so all you need is:
sudo apt-get install eclipse eclipse-cdt g++
Whether you messed up your system with your previous installation attempts depends heavily on how you did it. If you did it the safe way for trying out new packages not from repositories (i.e., only installed in your home folder, no sudos blindly copied from installation manuals...) you're definitely fine. Otherwise, you may well have thousands of stray files all over your file system now. In that case, run all uninstall scripts you can find for the things you installed, then install using apt-get and hope for the best.
I used (the suggested answer from above)
sudo apt-get install eclipse eclipse-cdt g++
but ONLY after then also doing
sudo eclipse -clean
Hope that also helps.
I also tried http://www.eclipse.org/cdt/ in Ubuntu 12.04.2 LTS and works fine!
First, I downloaded it from www.eclipse.org/downloads/, choosing Eclipse IDE for C/C++ Developers.
I save the file somewhere, let´s say into my home directory. Open a console or terminal, and type:
>>cd ~; tar xvzf eclipse*.tar.gz;
Remember for having Eclipse running in Linux, it is required a JVM, so download a jdk file e.g jdk-7u17-linux-i586.rpm (I cann´t post the link due to my low reputation) ... anyway
Install the .rpm file following http://www.wikihow.com/Install-Java-on-Linux
Find the path to the Java installation, by typing:
>>which java
I got /usr/bin/java. To start up Eclipse, type:
>>cd ~/eclipse; ./eclipse -vm /usr/bin/java
Also, once everything is installed, in the home directory, you can double-click the executable icon called eclipse, and then you´ll have it!. In case you like an icon, create a .desktop file in /usr/share/applications:
>>sudo gedit /usr/share/applications/eclipse.desktop
The .desktop file content is as follows:
[Desktop Entry]
Name=Eclipse
Type=Application
Exec="This is the path of the eclipse executable on your machine"
Terminal=false
Icon="This is the path of the icon.xpm file on your machine"
Comment=Integrated Development Environment
NoDisplay=false
Categories=Development;IDE
Name[en]=eclipse.desktop
Best luck!
I was in the same boat. Installed Eclipse, realized need CDT.
sudo apt-get install eclipse eclipse-cdt g++
This just adds the CDT package on top of existing installation - no un-installation etc. required.
http://www.eclipse.org/cdt/
^Give that a try
I have not used the CDT for eclipse but I do use Eclipse Java for Ubuntu 12.04 and it works wonders.
I'm running windows XP.
I have been following this tutorial and so downloading mingw-get-inst here.
I've done this a couple times and the last time I checked boes to install EVERYTHING including, but not limited to, gcc, g++, MSYS and the MinGW Compiling Suite. I told it to make a program menu shortcut, too.
I believe I have correctly added MinGW/bin to the Environment Settings' Path.
So I have the shortcut to the MSYS shell now. It goes to C:\MinGW\msys\1.0\msys.bat, but the whole msys directory does not exist!
There are tons of "packages" have been downloaded as far as I can tell ("mingw-get show" brings up a lot!), but it doesn't seem like any of it installed correctly.
Also, should I be able to use commands like "g++ foo.cpp -o foo.exe" from cmd.exe or only from the MSYS shell? Because I was unable to use cmd.exe.
Please help!
The MSYS and MinGW installation procedure is a nightmare, and has got worse over the years. If you just want the compiler suite (no UNIX tools like sed, grep), then I suggest you go to Twilight Dragon Media and download GCC from there. If you also want all the tools, including the Bash shell, the easiest way I've found to get them is to install Git for Windows (which you may want anyway), which includes them all. And if you want a C++ IDE that works well with GCC, take a look at Code::Blocks.
What is the result of running, at a cmd.exe prompt, the command echo %Path%? It should (given what you wrote about your system) include “C:\MinGW\bin”—does it?
What is the result of running dir C:\MinGW?
Note that mingw-get show shows details of available packages—those mingw-get knows how to download and install. The installer is a bit primitive, but has gotten better over the last year or so.
If you issue the command $ echo $PATH, you'll notice it contains /mingw/bin But the /mingw directory is unavailable. To mount it, edit the MSYS fstab, adding a line like C:\MinGW /mingw For details, see the MingW Getting Started guide, more specifically section "After Installing You Should..."
You only need to add MinGW/bin to the Windows' Environment Settings' Path if you plan to use MingW's executables outside of MSYS.