I'm currently on a task to upgrade from Redmine 3.0.3 to Redmine 4.0.3.
I have followed these steps from http://www.redmine.org/projects/redmine/wiki/redmineupgrade but the current system is running a version of Ruby that is not supported by Redmine 4.0.3. I have also tried to make a new server using Turnkey Redmine and then copied over the database and configuration file, but with no luck.
Has anyone done this before and if so is there an how-to guide somewhere?
This appears to be more of a general 'How to deploy a Rails application' question, not really Redmine specific.
In short, Chruby or the aforementioned Rvm are the answer to all your Ruby version problems. After installing a current version of Ruby, you will have to somehow configure your Ruby server (Unicorn or mod_rails or whatever you're using) to run with that version of Ruby. How to do that really depends on what you are running and, again, is not Redmine specific but specific to that server.
Related
I have a project which is done with Laravel 5.6. But My current server doesn't have php 7.1 installed yet. How is it possible to downgrade to Laravel 5.5?
I also down graded my project also, but then I was getting ton of errors. But most of them were about unfamiliar key words and unsupported packages. So, success depends on your project’s dependencies and also your effort.
Follow these steps.
Backup your project
Change the value of Laravel version inside the composer.json to Laravel 5.5
Delete vendor folder
Run composer install
** By then you will have to take care of any issues in your own code because there should be new functionalities in earlier versions which
is not used in older.
Or
Go to this page and do the instructions in reverse order
I've visited the wso2 website and the install instructions are very disjointed in that there is a lot of jumping around between pages. I've seen the following blog that seemed to streamline the instructions but it doesn't seem complete (plus it's out of date with the version it's installing) - https://maxmalm.se/blog/2014-06-17-installing-wso2-enterprise-mobility-manager-110
Has anyone seen step-by-step instructions on what needs to be done to completely setup wso2-EMM on a newly installed Ubuntu 14.04 virtual machine with just the O/S on it and none of the pre-reqs installed yet? The blog I mentioned above seems to give a lot of the necessary apt-get install bits but doesn't mention anything about a database (yet the wso2 has a whole section on installing and using a database).
Thank you.
To try out WSO2 EMM you will only need to have JDK 7 or 8 [1] installed as minimum to start off the server. WSO2 products are build to run with OOB database which is H2. So to get things started and play around, I suggest that you install java and then start the pack to get things going.
[1] https://docs.wso2.com/display/EMM201/Installing+on+Linux+or+OS+X
To getting started all you need is JDK installed in your machine and setting the Java related environment variables like PATH, JAVA_HOME. You might have to install the correct version of JDK for the particular version of the EMM.
Is there any documentation available that describes the WSO2 svn structure?
It seems that the folder https://svn.wso2.org/repos/wso2/branches/ is deprecated.
Question 1: Should I only be working in the svn folder https://svn.wso2.org/repos/wso2/carbon/?
In the https://svn.wso2.org/repos/wso2/carbon/ folder, I'm managing to piece bits together, for example the difference between Carbon orbit, kernel and platform (see previous stackoverflow question).
In the https://svn.wso2.org/repos/wso2/carbon/platform/branches/ folder, there are 3 sub-folders:
4.0.0
4.0.2AF
4.1.0
Question 2: 4.0.0 and 4.1.0 seem to be for the Carbon Platform, but what is 4.0.2AF - Is this Application Factory?
Question 3: If I want to work on a specific version of Carbon say 4.0.3, it seems that I need to checkout the 4.0.0 branch. What else do I need to do so that mvn clean install will build 4.0.3 for me?
Question: Should I only be working in the svn folder https://svn.wso2.org/repos/wso2/carbon/?
WSO2 is currently doing active development in following svn directory.
https://svn.wso2.org/repos/wso2/carbon/
Question: 4.0.0 and 4.1.0 seem to be for the Carbon Platform, but what is 4.0.2AF - Is this Application Factory?
The branches in https://svn.wso2.org/repos/wso2/carbon/platform/branches/ are for the Carbon platform. The branch 4.0.2AF is for WSO2 App Factory (http://wso2.com/cloud/app-factory/)
Question: If I want to work on a specific version of Carbon say 4.0.3, it seems that I need to checkout the 4.0.0 branch. What else do I need to do so that mvn clean install will build 4.0.3 for me?
You can build Carbon 4.0.3 from following:
https://svn.wso2.org/repos/wso2/carbon/kernel/branches/4.0.0/patch-releases/4.0.3/
You will be able to build products using the branch. That's why branch SVN URL is given in the links.
Each branch has a patch release for minor platform releases. For example: https://svn.wso2.org/repos/wso2/carbon/platform/branches/4.0.0/patch-releases/
As mentioned in your answer, you can build from a tagged version also.
You can more details about product version and carbon version from the release matrix: http://wso2.com/products/carbon/release-matrix/
You can also subscribe to WSO2 mailing lists and get more information, if you have not subscribed already.
The answer to question 3 is build a checkout a tagged version (of course!!). Thanks to the answer here for pointing me in the right direction.
I was blindly following the wiki documentation which tells you to checkout a branch.
I am trying to follow the directions on this ud3323/bpm wiki page to create an Ember.js application using bpm. The very first command on this page (bpm init hello_world) is throwing an exception - "No such file or directory - C:/apps/ruby-1.9.3/lib/ruby/gems/1.9.1/gems/execjs-1.2.13/lib/execjs/support/which.bat" (see the issue logged here - my comment is the second one). I checked the files under execjs directory - there is no file called which.bat. Note that I installed bpm using "gem install bpm". I don't know how to build ud3323's fork (don't know Ruby - I installed it just to try out bpm). Can anybody help me get past this issue?
Thanks in advance for your time.
Naresh,
I got some free time and found the issue. The current build of BPM requires the use of the gem execjs version 1.2.4. You probably have the latest version which is 1.3.0 or the latest from the 1.2.x branch.
What you need to do is install the correct version by running the command gem install execjs --version 1.2.4. After that BPM should work fine. I have it running on Windows7 64bit with a clean installation of Ruby 1.9.2.
Also for anyone else, I have detailed instructions of exactly what I did on this page: https://github.com/ud3323/bpm/wiki/Installing-with-Windows
I'm trying to get Mylyn and Redmine work together so I can manage tasks right inside Eclipse. I saw this on redmine wiki http://www.redmine.org/wiki/redmine/HowTo_Mylyn but I think it's for the old version of Mylyn.
I can't find the Generic Web Connector plugin for Mylyn but there's this Web templates plugin. I think that one replaced the Generic Web Connector. But it's quite different from the screenshots posted at the Redmine wiki. There's no Task URL, New Task URL, etc.
Here is what you are looking for:
http://sourceforge.net/projects/redmin-mylyncon/
A Mylyn connector specially for RedMine. It works fine with eclipse ganymede.
The update site is: http://redmin-mylyncon.sourceforge.net/update-site/N/
Here are the steps to perform integration between Eclipse Mylyn and Redmine.
I assume that Eclipse, Mylyn and Redmine are already installed, the latter somewhere in $REDMINE_HOME. Tested with Eclipse 3.7 and Redmine 1.2.1.
Summarily, you need to install an Eclipse plugin AND a Redmine plugin.
Go to $REDMINE_HOME/vendor/plugins and run
git clone git://redmin-mylyncon.git.sourceforge.net/gitroot/redmin-mylyncon/redmine-mylyn-connector
(Re)start the server, and in Redmine under Administration/Plugins the Mylyn Connector Plugin should be listed
Again in Redmine, under Administration/Settings/Authentication, check the "Enable REST web service" field
In Eclipse, install the Eclipse connector via its update site
http://redmin-mylyncon.sourceforge.net/update-site/N/
Create your repository and check that it connects, then you are good to go!
See this manual.
http://wiki.eclipse.org/index.php/Mylyn_Extensions
Eclipse Menu.
Help -> Software Updates ... -> Add Site...
http://download.eclipse.org/tools/mylyn/update/incubator
http://www.redmine.org/projects/redmine/wiki/HowTo_Mylyn
http://danmunn.github.com/redmine_mylyn_connector/
https://github.com/danmunn/redmine_mylyn_connector
As of july 2012 now there is a new dedicated Redmine-Mylyn-Connector under active development for Redmine 2.x! (Got to admit, I haven't tested it yet.)
I am in the process of testing the 1.x connector that can be found on sourceforge, I will edit this post once I am done.
EDIT:
The update-site for the mylyn-plugin from the link in the accepted posting works.
As well as the mylyn-connector for the redmine installation. (Tested with 1.3.2 installation, don't forget to restart the web server after installing it. ;))
But both things aren't working out... once the mylyn-connector is installed, the web-interface is not working anymore. ;(
EDIT2:
The special connector works with 2.x and Mylyn finally looks proper.
http://danmunn.github.com/redmine_mylyn_connector/ the redmine server plugin.
http://kenjiru.ro/blog/2012/02/install-the-redmine-mylyn-connector-for-eclipse another server plugin link and the eclipse connector plugin
Will look like this.
As of yesterday, Sven has taken down the update site (if you go there, you'll find nothing) since someone reported him to Sourceforge (see https://sourceforge.net/tracker/?func=detail&aid=3441532&group_id=228995&atid=1075435).
So, there are NO binaries available now for Eclipse. Does anyone know of alternative ways to get these plugins? I have no clue how to compile.
The GIT and SVN repositories are there, but again as I sad, I'm not a java programmer. Can anyone offer Sven a site where he can store the binaries as an Update?
For retrieve redmine mylyn connector
https://github.com/ljader/redmine-mylyn-plugin
In eclipse juno 4.2
"Install new software" and as local archive like in this post :
How to install plugin for Eclipse from .zip
Also a good read from redmine.
HowTo connect a Mylyn repository to Redmine:
http://www.redmine.org/wiki/1/HowTo_Mylyn
download.eclipse.org/tools/mylyn/update/incubator wont work anymore, for the new update sites look at http://www.eclipse.org/mylyn/downloads/
The Web Connector could be found via http://download.eclipse.org/mylyn/incubator/3.5