I have to perform a number of processing for past 2 years (2017-2019) within SAS for every month.
I have a job that uses a YYMMDD parameter to indicate what data should be used from the data warehouse.
Lets say i have a table with JOB_NAME and JOB_DATE columns along with conditions (based on rc value the next one will start or not).
How can i tell SAS to take the date parameter from a certain column in a certain table?
You can just format after loading dataset...
data Want;
set have;
format JOB_DATE YYMMDD10. /*or use YYMMDD8.*/;
run;
Related
I want to forecast for next year, i have data for 2013. dates are in format:
08JUL13:05:06:00
for data preparation it takes intervals as minutes and whenever i change interval there is no output.
Also when Interval is in minutes my data has lot of missing values which i understand because this is billing data for entire year.
try datepart() function. it takes only date from date-time format
so datepart('08JUL13:05:06:00'dt) returns '08Jul13'd
data want;
data have
date_Column = Datepart(Date)
format date_Column date9.;
run;
I have a table in SAS which contains the format information I want. I want to bin this data into the categories given.
What I don't know how to do is create either an xform or a format file from the data.
An example table looks like this:
TxtLabel Type FmtName label Hlo count
. I FAC1f 0 O 1
1996 I FAC1f 1 2
1997 I FAC1f 2 3
I want to date all years in a different data set as after 1997 OR before 1996.
The problem is that I know how to do this by hard coding it, but these files changes the numbers each time so I'm hoping to use the information in the table to generate the bins rather than hard code them.
How do I go about binning by data using a column from another dataset for my categorization?
Edit
I have two data sets, one which looks like the one I have included and one which has a column titled "YEAR". I want to bin the second data set using the categories from the first. In this case there are two available years in TxtLabel. There are multiple tables like this, I'm looking at how to generate PROC Format code from the table, rather than hard coding the values.
This should run to create the desired format
Proc FORMAT CNTLIN=MyCustomFormatControlData;
run;
You can then use it in a DATA Step, or apply it to a column in a data set.
Binning the data might be construed as 'data set splitting' but your question does not make it clear if that is so. Generic arbitrary splitting is often done with one of these techniques:
wall paper source code resolved from macro variables populated from information garnered in a Proc SQL or Proc FREQ step
dynamic data splitting using hash object for grouping records in memory, and saved to a data set with an .output() call.
Sample code for explicit binning
data want0 want1 want2 want3 want4 want5 wantOther;
set have;
* explicit wall paper;
select (put(year,FAC1f.));
when ('0') output want0;
when ('1') output want1;
when ('2') output want2;
when ('3') output want3;
when ('4') output want4;
when ('5') output want5;
otherwise output wantOther;
run;
This is the construct that source code generated by macro can produce, and requires
one pass to determine the when/output lines that are to be generated
a second pass to apply the lines of code that were generated.
If this is the data processing that you are attempting:
do some research (plenty of info out there)
write some code
make a new question if you get errors you can't resolve
Proc FORMAT
Proc FORMAT has a CNTLIN option for specifying a data set containing the format information. The structure and values expected of the Input Control Data Set (that CNTLIN) is described in the Output Control Data Set documentation. Some of the important control data columns are:
FMTNAME
specifies a character variable whose value is the format or informat name.
LABEL
specifies a character variable whose value is associated with a format or an informat.
START
specifies a character variable that gives the range's starting value.
END
specifies a character variable that gives the range's ending value.
As the requirements of the custom format to be created get more sophisticated you will need to have more information variables in the input control data set.
I have a dataset with many dates in them. I want to categorize these dates into a new column that organizes them by decade (1980s, 1990s, etc).
I have a good idea on how to use IF, AND, and ELSE statements to accomplish this, but I don't know how to have SAS extract the year and only the year from the date to apply it to the conditional logic.
You could always use multipliers and the intnx() function as well.
Using Allan's sample data...
data want;
set have;
decade=year(intnx('year10.',dateval,0,'beginning'));
run;
The intnx() part of the code returns the date corresponding to the start of the decade, then we just take the year portion from it.
The year10. parameter tells it we want to work with decades, the 0 parameter means shift the date supplied to the current decade, and the beginning parameter tells it to return the date corresponding to the beginning of the decade.
If you're not familiar with using intnx() to perform date calculations in SAS see here for a quick primer: https://stackoverflow.com/a/11211180/214994
No need for conditional logic - can use a combination of the year() and floor() functions with some simple arithmetic:
data have;
infile cards;
input dateval date9.;
cards;
01JAN2004
08FEB1996
07MAR1987
14SEP1982
;run;
data want;
set have;
decade=floor(year(dateval)/10)*10;
run;
Which gives:
I just start learning sas and would like some help with understanding the following chunk of code. The following program computes the annual payroll by department.
proc sort data = company.usa out=work.temp;
by dept;
run;
data company.budget(keep=dept payroll);
set work.temp;
by dept;
if wagecat ='S' then yearly = wagrate *12;
else if wagecat = 'H' then yearly = wagerate *2000;
if first.dept then payroll=0;
payroll+yearly;
if last.dept;
run;
Questions:
What does out = work.temp do in the first line of this code?
I understand the data step created 2 temporary variables for each by variable (first.varibale/last.variable) and the values are either 1 or 0, but what does first.dept and last.dept exactly do here in the code?
Why do we need payroll=0 after first.dept in the second to the last line?
This code takes the data for salaries and calculates the payroll amount for each department for a year, assuming salary is the same for all 12 months and that an hourly worker works 2000 hours.
It creates a copy of the data set which is sorted and stored in the work library. RTM.
From the docs
OUT= SAS-data-set
names the output data set. If SAS-data-set does not exist, then PROC SORT creates it.
CAUTION:
Use care when you use PROC SORT without OUT=.
Without the OUT= option, PROC SORT replaces the original data set with the sorted observations when the procedure executes without errors.
Default Without OUT=, PROC SORT overwrites the original data set.
Tips With in-database sorts, the output data set cannot refer to the input table on the DBMS.
You can use data set options with OUT=.
See SAS Data Set Options: Reference
Example Sorting by the Values of Multiple Variables
First.DEPT is an indicator variable that indicates the first observation of a specific BY group. So when you encounter the first record for a department it is identified. Last.DEPT is the last record for that specific department. It means the next record would the first record for a different department.
It sets PAYROLL to 0 at the first of each record. Since you have if last.dept; that means that only the last record for each department is outputted. This code is not intuitive - it's a manual way to sum the wages for people in each department. The common way would be to use a summary procedure, such as MEANS/SUMMARY but I assume they were trying to avoid having two passes of the data. Though if you're not sorting it may be just as fast anyways.
Again, RTM here. The SAS documentation is quite thorough on these beginner topics.
Here's an alternative method that should generate the exact same results but is more intuitive IMO.
data temp;
set company.usa;
if wagecat='S' then factor=12; *salary in months;
else if wagecat='H' then factor=2000; *salary in hours;
run;
proc means data=temp noprint NWAY;
class dept;
var wagerate;
weight factor;
output out=company.budget sum(wagerate)=payroll;
run;
I am working with multiple waves of survey data. I have finished defining formats and labels for the first wave of data.
The second wave of data will be different, but the codes, labels, formats, and variable names will all be the same. I do not want to define all these attributes again...it seems like there should be a way to export the PROC CONTENTS information for one dataset and import it into another dataset. Is there a way to do this?
The closest thing I've found is PROC CPORT but I am totally confused by it and cannot get it to run.
(Just to be clear I'll ask the question another way as well...)
When you run PROC CONTENTS, SAS tells you what format, labels, etc. it is using for each variable in the dataset.
I have a second dataset with the exact same variable names. I would like to use the variable attributes from the first dataset on the variables in the second dataset. Is there any way to do this?
Thanks!
So you have a MODEL dataset and a HAVE dataset, both with data in them. You want to create WANT dataset which has data from HAVE, with attributes of MODEL (formats, labels, and variable lengths). You can do this like:
data WANT ;
if 0 then set MODEL ;
set HAVE ;
run ;
This works because when the DATA step compiles, SAS builds the Program Data Vector (PDV) which defines variable attributes. Even though the SET MODEL never executes (because 0 is not true), all of the variables in MODEL are created in the PDV when the step compiles.
Importantly, note that if there are corresponding variables with different lengths, the length from MODEL will determine the length of the variable in WANT. So if HAVE has a variable that is longer than the same-named variable in MODEL, it may be truncated. Options VARLENCHK determines whether or not SAS throws a warning/error if this happens.
That assumes there are no formats/labels on the HAVE dataset. If there is a variable in HAVE that has a format/label, and the corresponding variable in MODEL does not have a format/label, the format/label from HAVE will be applied to WANT.
Sample code below.
data model;
set sashelp.class;
length FavoriteColor $3;
FavoriteColor="Red";
dob=today();
label
dob='BirthDate'
;
format
dob mmddyy10.
;
run;
data have;
set sashelp.class;
length FavoriteColor $10;
dob=today()-1;
FavoriteColor="Orange";
label
Name="HaveLabel"
dob="HaveLabel"
;
format
Name $1.
dob comma.
;
run;
options varlenchk=warn;
data want;
if 0 then set model;
set have;
run;
I'd create an empty dataset based on the existing one, and then use proc append to append the contents to it.
Create some sample data for the second round of data:
data new_data;
age = 10;
run;
Create an empty dataset based on the original data:
proc sql noprint;
create table want like sashelp.class;
quit;
Append the data into the empty dataset, retaining the details from the original:
proc append base=want data=new_data force nowarn;
run;
Note that I've used the force and nowarn options on proc append. This will ensure the data is appended even if differences are found between the two datasets being used. This is expected if you have, for example, format differences. It will also hide things like if columns exist in the new table that aren't in the old table etc. So be careful that this is doing what you want it to. If the behaviour is undesirable, consider using a datastep to append instead (and list the want dataset first).
Welcome to the stack.
If you want to copy the properties of the table without the data within it, you could use PROC SQL or data step with zero rows read in.
This examples copies all information about the SASHELP.CLASS dataset into a brand new dataset. All formats, attributes, labels, the whole thing is copies over. If you want to only copy some of the columns, specify them in select clause instead of asterix.
PROC SQL outobs=0;
CREATE TABLE WANT as SELECT * FROM SASHELP.CLASS;
QUIT;
Regards,
Vasilij