How to add a sub-app in django to INSTALLED_APPS? - django

I have the structure of my project:
project
———— project
———— app
———————— subapp
———— manage.py
I added my sub-app to INSTALLED_APPS like that:
INSTALLED_APPS = ['app.apps.AppConfig', 'app.subapp.apps.SubapConfig']
But it doesn't works. Django gives me an error message:
No module named 'news' and Cannot import 'news'. Check that
'apps.subapp.apps.SubapConfig.name' is correct.

Let's assume I've created an app named polls with the following command:
python manage.py startapp polls
Now I want to create a sub-app named subpoll inside the main app means inside the polls folder. So, how do I do that?
At first, I'll create a directory My_App_Name inside the /polls folder. In my case, I'll create a subpoll folder inside the polls folder.
After that, run the following command to create the new app.
python manage.py startapp My_App_Name ./polls/Your_Apps_Folder_Name/
So, in my case the following command will be like:
python manage.py startapp subpoll ./polls/subpoll/
Finally, I'll add just created apps name in the settings.py like below:
INSTALLED_APPS = [
...,
'polls',
'polls.subpoll',
]

I had a similar issue. In the apps.py Config class you need to set name to be the full dotted path. So based on the structure you give:
project
———— project
———— app
———————— subapp
———— manage.py
You would have:
class AppConfig(AppConfig):
name = "app"
and
class SubappConfig(AppConfig):
name = "app.subapp"
This should then work for you.

Related

django makemigrations doesn't recognize new model [duplicate]

I was trying to create migrations within an existing app using the makemigrations command but it outputs "No changes detected".
Usually I create new apps using the startapp command but did not use it for this app when I created it.
After debugging, I found that it is not creating migration because the migrations package/folder is missing from an app.
Would it be better if it creates the folder if it is not there or am I missing something?
To create initial migrations for an app, run makemigrations and specify the app name. The migrations folder will be created.
./manage.py makemigrations <myapp>
Your app must be included in INSTALLED_APPS first (inside settings.py).
My problem (and so solution) was yet different from those described above.
I wasn't using models.py file, but created a models directory and created the my_model.py file there, where I put my model. Django couldn't find my model so it wrote that there are no migrations to apply.
My solution was: in the my_app/models/__init__.py file I added this line:
from .my_model import MyModel
There are multiple possible reasons for django not detecting what to migrate during the makemigrations command.
migration folder You need a migrations package in your app.
INSTALLED_APPS You need your app to be specified in the INSTALLED_APPS .dict
Verbosity start by running makemigrations -v 3 for verbosity. This might shed some light on the problem.
Full path In INSTALLED_APPS it is recommended to specify the full module app config path 'apply.apps.MyAppConfig'
--settings you might want to make sure the correct settings file is set: manage.py makemigrations --settings mysite.settings
specify app name explicitly put the app name in manage.py makemigrations myapp - that narrows down the migrations for the app alone and helps you isolate the problem.
model meta check you have the right app_label in your model meta
Debug django debug django core script. makemigrations command is pretty much straight forward. Here's how to do it in pycharm. change your script definition accordingly (ex: makemigrations --traceback myapp)
Multiple databases:
Db Router when working with django db router, the router class (your custom router class) needs to implement the allow_syncdb method.
makemigrations always creates migrations for model changes, but if
allow_migrate() returns False,
I've read many answers to this question often stating to simply run makemigrations in some other ways. But to me, the problem was in the Meta subclass of models.
I have an app config that says label = <app name> (in the apps.py file, beside models.py, views.py etc). If by any chance your meta class doesn't have the same label as the app label (for instance because you are splitting one too big app into multiple ones), no changes are detected (and no helpful error message whatsoever). So in my model class I have now:
class ModelClassName(models.Model):
class Meta:
app_label = '<app name>' # <-- this label was wrong before.
field_name = models.FloatField()
...
Running Django 1.10 here.
Another thing that will cause this is a trailing comma after the field which will cause the field to skipped during makemigrations:
class MyModel(models.Model):
name = models.CharField(max_length=64, null=True) # works
language_code = models.CharField(max_length=2, default='en') # works
is_dumb = models.BooleanField(default=False), # doesn't work
I had a trailing , in one line perhaps from copy&paste. The line with is_dumb doesn't create a model migration with ./manage.py makemigrations because Python thinks it is a tuple, and Django doesn't consider it a field.
It is a comment but should probably be an answer.
Make sure that your app name is in settings.py INSTALLED_APPS otherwise no matter what you do it will not run the migrations.
INSTALLED_APPS = [
'django.contrib.admin',
'django.contrib.auth',
'django.contrib.contenttypes',
'django.contrib.sessions',
'django.contrib.messages',
'django.contrib.staticfiles',
'blog',
]
Then run:
./manage.py makemigrations blog
update: One should make sure that an __init__.py file exists in the migrations folder before trying:
./manage.py makemigrations <myapp1> <myapp2> ... <myappN>
There are sometimes when ./manage.py makemigrations is superior to ./manage.py makemigrations <myapp> because it can handle certain conflicts between apps.
Those occasions occur silently and it takes several hours of swearing to understand the real meaning of the dreaded No changes detected message.
Therefore, it is a far better choice to make use of the following command:
./manage.py makemigrations <myapp1> <myapp2> ... <myappN>
Method : 1
Step : 1
Make sure your app must be included in INSTALLED_APPS in settings.py
Stpe : 2
python manage.py makemigrations <appname>
if same message shows (No changes detected)
!Warning This is Very Risky For Your Project So Make Sure You Have Backup For Your Project Before Applying The Method 2.
Method 2
rename your app name and make new app using :
django-admin startapp <appname>
copy all .py files except from the old app
migration folder
pycache folder
init.py
test.py file if you didn't wrote code in it
and paste into the new app which you made recently
remember you have to make exact the same name for new app otherwise you have to make more changes in the project.
Make sure your app is mentioned in installed_apps in settings.py
Make sure you model class extends models.Model
My problem was much simpler than the above answers and probably a far more common reason as long as your project is already set up and working. In one of my applications that had been working for a long time, migrations seemed wonky, so in a hurry, I did the following:
rm -r */migrations/*
rm db.sqlite3
python3 manage.py makemigrations
No changes detected
Whaat??
I had mistakenly also removed all the __init__.py files :( - Everything was working again after I went in and:
touch ads1/migrations/__init__.py
For each of my applications then the makemigrations worked again.
It turns out that I had manually created a new application by copying another and forgot to put the __init__.py in the migrations folder and that confinved me that everything was wonky - leading my making it worse with an rm -r as described above.
Hope this helps someone from swearing at the "No changes detected" error for a few hours.
I had copied a table in from outside of django and the Meta class defaulted to "managed = false". For example:
class Rssemailsubscription(models.Model):
id = models.CharField(primary_key=True, max_length=36)
...
area = models.FloatField('Area (Sq. KM)', null=True)
class Meta:
managed = False
db_table = 'RSSEmailSubscription'
By changing managed to True, makemigrations started picking up changes.
Another possible reason is if you had some models defined in another file (not in a package) and haven't referenced that anywhere else.
For me, simply adding from .graph_model import * to admin.py (where graph_model.py was the new file) fixed the problem.
When adding new models to the django api application and running the python manage.py makemigrations the tool did not detect any new models.
The strange thing was that the old models did got picked by makemigrations, but this was because they were referenced in the urlpatterns chain and the tool somehow detected them. So keep an eye on that behavior.
The problem was because the directory structure corresponding to the models package had subpackages and all the __init__.py files were empty. They must explicitly import all the required classes in each subfolder and in the models __init__.py for Django to pick them up with the makemigrations tool.
models
├── __init__.py <--- empty
├── patient
│ ├── __init__.py <--- empty
│ ├── breed.py
│ └── ...
├── timeline
│ ├── __init__.py <-- empty
│ ├── event.py
│ └── ...
This might hopefully help someone else, as I ended up spending hours trying to chase this down.
If you have a function within your model by the same name, this will remove the value. Pretty obvious in hindsight, but nonetheless.
So, if you have something like this:
class Foobar(models.Model):
[...]
something = models.BooleanField(default=False)
[...]
def something(self):
return [some logic]
In that case, the function will override the setting above, making it "invisible" to makemigrations.
A very dumb issue you can have as well is to define two class Meta in your model. In that case, any change to the first one won't be applied when running makemigrations.
class Product(models.Model):
somefield = models.CharField(max_length=255)
someotherfield = models.CharField(max_length=255)
class Meta:
indexes = [models.Index(fields=["somefield"], name="somefield_idx")]
def somefunc(self):
pass
# Many lines...
class Meta:
indexes = [models.Index(fields=["someotherfield"], name="someotherfield_idx")]
In my case i forgot to insert the class arguments
Wrong:
class AccountInformation():
Correct
class AccountInformation(models.Model):
I had a different issue while creating a new app called deals. I wanted to separate the models inside that app so I had 2 model files named deals.py and dealers.py.
When running python manage.py makemigrations I got: No changes detected.
I went ahead and inside the __init__.py which lives on the same directory where my model files lived (deals and dealer) I did
from .deals import *
from .dealers import *
And then the makemigrations command worked.
Turns out that if you are not importing the models anywhere OR your models file name isn't models.py then the models wont be detected.
Another issue that happened to me is the way I wrote the app in settings.py:
I had:
apps.deals
It should've been including the root project folder:
cars.apps.deals
I solved that problem by doing this:
Erase the "db.sqlite3" file. The issue here is that your current data base will be erased, so you will have to remake it again.
Inside the migrations folder of your edited app, erase the last updated file. Remember that the first created file is: "0001_initial.py". For example: I made a new class and register it by the "makemigrations" and "migrate" procedure, now a new file called "0002_auto_etc.py" was created; erase it.
Go to the "pycache" folder (inside the migrations folder) and erase the file "0002_auto_etc.pyc".
Finally, go to the console and use "python manage.py makemigrations" and "python manage.py migrate".
I know this is an old question but I fought with this same issue all day and my solution was a simple one.
I had my directory structure something along the lines of...
apps/
app/
__init__.py
app_sub1/
__init__.py
models.py
app_sub2/
__init__.py
models.py
app_sub3/
__init__.py
models.py
app2/
__init__.py
app2_sub1/
__init__.py
models.py
app2_sub2/
__init__.py
models.py
app2_sub3/
__init__.py
models.py
main_app/
__init__.py
models.py
And since all the other models up until the one I had a problem with were being imported somewhere else that ended up importing from main_app which was registered in the INSTALLED_APPS, I just got lucky that they all worked.
But since I only added each app to INSTALLED_APPS and not the app_sub* when I finally added a new models file that wasn't imported ANYWHERE else, Django totally ignored it.
My fix was adding a models.py file to the base directory of each app like this...
apps/
app/
__init__.py
models.py <<<<<<<<<<--------------------------
app_sub1/
__init__.py
models.py
app_sub2/
__init__.py
models.py
app_sub3/
__init__.py
models.py
app2/
__init__.py
models.py <<<<<<<<<<--------------------------
app2_sub1/
__init__.py
models.py
app2_sub2/
__init__.py
models.py
app2_sub3/
__init__.py
models.py
main_app/
__init__.py
models.py
and then add from apps.app.app_sub1 import * and so on to each of the app level models.py files.
Bleh... this took me SO long to figure out and I couldn't find the solution anywhere... I even went to page 2 of the google results.
Hope this helps someone!
I forgot to put correct arguments:
class LineInOffice(models.Model): # here
addressOfOffice = models.CharField("Корхоная жош",max_length= 200) #and here
...
in models.py
and then it started to drop that annoying
No changes detected in app 'myApp '
INSTALLED_APPS = [
'blog.apps.BlogConfig',
'django.contrib.admin',
'django.contrib.auth',
'django.contrib.contenttypes',
'django.contrib.sessions',
'django.contrib.messages',
'django.contrib.staticfiles',
]
make sure 'blog.apps.BlogConfig', (this is included in your settings.py in order to make your app migrations)
then run python3 manage.py makemigrations blog or your app name
This could be done by using two steps that are mentioned below.
add your app to settings.py > INSTALLED_APPS
open admin.py
from .models import upImg
# Register your models here.
admin.site.register(upImg)
NOTE: replace upImg with your className defined in models.py
after that see if there still any python manage.py makemigrations are left or not. if there is, than execute python manage.py migrate too.
For more info follow this django tutorial.
The solution is you have to include your app in INSTALLED_APPS.
I missed it and I found this same issue.
after specifying my app name migration became successful
INSTALLED_APPS = [
'django.contrib.admin',
'django.contrib.auth',
'django.contrib.contenttypes',
'django.contrib.sessions',
'django.contrib.messages',
'django.contrib.staticfiles',
'boards',
]
please note I mentioned boards in last, which is my app name.
One more edge case and solution:
I added a boolean field, and at the same time added an #property referencing it, with the same name (doh). Commented the property and migration sees and adds the new field. Renamed the property and all is good.
Try registering your model in admin.py, here's an example:-
admin.site.register(YourModelHere)
You can do the following things:-
1. admin.site.register(YourModelHere) # In admin.py
2. Reload the page and try again
3. Hit CTRL-S and save
4. There might be an error, specially check models.py and admin.py
5. Or, at the end of it all just restart the server
I had a similar issue with django 3.0, according migrations section in the official documentation, running this was enough to update my table structure:
python manage.py makemigrations
python manage.py migrate
But the output was always the same: 'no change detected' about my models after I executed 'makemigrations' script.
I had a syntax error on models.py at the model I wanted to update on db:
field_model : models.CharField(max_length=255, ...)
instead of:
field_model = models.CharField(max_length=255, ...)
Solving this stupid mistake, with those command the migration was done without problems. Maybe this helps someone.
My problem with this error, was that I had included:
class Meta:
abstract = True
Inside model that I wanted to creation migrate for.
Its easy, you need to add empty init.py in empty migrations folder.
Then check migrations using "python manage.py makemigrations"
Directory structure-
Your App
migrations
init.py
You should add polls.apps.PollsConfig to INSTALLED_APPS in setting.py
The possible reason could be deletion of the existing db file and migrations folder
you can use python manage.py makemigrations <app_name> this should work. I once faced a similar problem.

Django makemigrations not detecting project/apps/myapp

Solved
Interesting:
./manage.py makemigrations apps.myapp -> "App 'apps.myapp' could
not be found. Is it in INSTALLED_APPS?"
./manage.py makemigrations myapp -> Works.
./manage.py makemigrations -> "No changes detected" (it does detect changes if myapp is in the project root)
Original question:
Project structure
myproject/
myproject/
apps/
myapp/
__init__.py
admin.py
models.py
urls.py
views.py
tests.py
myapp2/
myapp3/
__init__.py
static/
templates/
virtualenv/
manage.py
myproject/apps/myapp/models.py
from django.db import models
class MyModel(models.Model):
name = models.CharField(max_length=200)
created = models.DateTimeField(auto_now_add=True)
Settings.py
INSTALLED_APPS = [
# ...
'apps.myapp',
'apps.myapp2',
'apps.myapp3',
]
makemigrations cannot find "myapps" that's not in the project root.
At the same time, migrate does find it.
$ ./manage.py makemigrations apps.myapp
App 'apps.myapp' could not be found. Is it in INSTALLED_APPS?
$ ./manage.py migrate apps.myapp
CommandError: App 'apps.myapp' does not have migrations.
Isn't the "let's put our apps into an apps folder" practise valid any more, am I doing something wrong, or is it a bug of the makemigrations command?
Note1: before running makemigrations, I removed the "migrations" folder of myapp, but I'm pretty sure it doesn't matter. It did get re-created when the app was in the project root.
Note2: I did research google and stackoverflow, I only found similar questions where the solution was either "adding the app to settings.py", "running makemigrations before migrate" or "some migration issue between Django 1.6 and 1.7". None of these apply to my situation, I think.
You may have deleted the migrations folder inside the app or __init__.py inside the <app>/migrations/ folder, create a new one
myproject/
apps/
myapp/
migrations/
__init__.py
You can always do makemigrations seperately without doing the above step
python manage.py makemigrations myapp
try
INSTALLED_APPS = [
# ...
'myproject.apps.myapp',
]
and
python manage.py makemigrations myapp
It's works now. It didn't work before because I didn't make any changes to my model.
I'm new to django and was trying to execute the command from the videos I watched. Django documentation tells you that makemigrations create new migrations based on the changes you made to your model. So, I make changes in models.py and admin.py and it's working now.
I had the same problem. I solved it by adding "migrations" file into the app folders.

How To Find Current Django App Name

I have an app. I think I know the name, instamagic, but I get django.core.exceptions.ImproperlyConfigured: App with label instamagic could not be found
when I try to do a migration of the database
How do I find my app's name?
My folder structure
instamagic
__init__.py (empty file)
manage.py
settings.py
urls.py
api/
image/
templates/
userprofile/
Have you added 'instamagic' to your INSTALLED_APPS in settings.py?
[EDIT]
When calling south migrations, use: `manage.py schemamigration [migration_name] --auto

django startapp admin file missing

I've been following the DjangoProject tutorial. When I run
python manage.py startapp newapp
while in the same directory as manage.py. In the newapp directory I see init.py, models.py, tests.py, and views.py but not admin.py file. Where is admin.py?
You have to create it yourself.
edit:
Currently only the development version of Django creates an admin.py file within a new app.

ImportError After Moving App to Nested Folder

My application was working fine when I wanted to see whether I could organize my project in a better way. I read through this tutorial on structuring a django project.
Before my project structure was as follows:
camucamu
books
admin.py
models.py
views.py
__init__.py
static
templates
urls.py
views.py
settings.py
wsgi.py
__init__.py
What I wanted to do was move the books app into an apps folder. Thus I did that and changed the project structure to the following:
camucamu
apps
books
admin.py
models.py
views.py
__init__.py
static
templates
urls.py
views.py
settings.py
wsgi.py
__init__.py
I then changed the imports in views.py and admin.py
from books.models to apps.books.models.
I also changed INSTALLED_APPS in settings.py from books to apps.books.
When I then tried to run syncdb, I get the following error:
raise ImproperlyConfigured('ImportError %s: %s' % (app, e.args[0]))
django.core.exceptions.ImproperlyConfigured: ImportError apps.books: No module named apps.books
What am I messing up here so it can't find my app anymore?
Your apps folder does not have an __init__.py file so it cannot be recognized as a python module
I got the same error, following the same guide, as the last point of the following list was not cited. Make sure you performed the following changes:
Create a blank __init__.py file inside the apps folder (needed for python to recognize it as a package)
Update the import statements wherever you refer to an external app:
from projectname.apps.appname.models import YourModel, YourOtherModel
Inside settings.py edit INSTALLED_APPS such that it looks like this:
INSTALLED_APPS = (
...
# apps
'projectname.apps.appname1',
'projectname.apps.appname2',
)
This one is not specified in the guide: In all your urls.py files, update the urlpatterns!
BEFORE:
# client views
urlpatterns += patterns('appname',
...
)
AFTER:
# client views
urlpatterns += patterns('projectname.apps.appname',
...
)
Finally remember to update your changes by calling python manage.py syncdb
Hope that helped.