I am having a hard time making a Cloud Run app that would serve as an internal API for employees (no frontend).
This would have endpoints like: POST api.mydomain.com/post-some-data where i want to pass some body parameters.
After IAP is setup and applied through a Load Balancer, I can enter the url in a browser and a consent screen appears. I log in with an account that has permissions and the relevant code runs as expected.
BUT
When trying with Postman, having the OAuth2 set as Authentication, setting all the token configurations etc - I get a consent screen in the browser as expected. After authentication I get a Access Token back to Postman in the format ya28.a0 ... w0123. When clicking "SEND" it returns
Invalid IAP credentials: Unable to parse JWT
My question
What is required to reach the endpoint (code/app) with the given OAuth header after consent? It works from the browser directly but not through Postman after getting the Access Token from browser consent. The endpoint/app is not reached at all from my understanding. So I cant break down the header in the endpoint-code as far as I know.
The goal is to be able to pass body parameters and having a nice shared API collection in postman. And that cant be done in the same way directly through a browser.
Thanks,
I've set up all the necessary steps in GCP for a Cloud Run app secured by IAP.
I've made sure a simple endpoint works as expected directly through a browser + consent screen.
I've successfully made Postman OAuth2 go through my consent in GCP and ask for auth.
I've got an Access Token back to Postman before sending the request.
I am using Django 4.0 with python 3.9 and I installed drf-social-oauth2 in my app. I was using the now depreciated gapi Oauth2 for google login and it worked fine. Then I started getting warnings in my console that it'll not be in use for some time to come so I changed to the new google Identity Service(gsi client). What I used to get from gapi was an access_token which I use to verify users on my backend. now I get a credential jwt which I'm supposed to decode to get user details.
when I send this code to the /auth/convert-token/ end point, I get AccessDeniedError at /auth/convert-token (access_denied) Your credentials aren't allowed <oauthlib.Request SANITIZED>
all my details are correct and I'm stuck.
Tested this using vscode thunder client.
I have found a solution. turns out the jwt isn't what I'm supposed to send to my backend. I used the jwt token to get an access token for the user which I then used to authenticate the user on my backend.
I'm trying to setup a VPN connection using a federated login with Google IdP following these instructions.
Previously, I had configured a saml-provider with Google and it worked fine to authenticate users to the AWS console through Google using ARN roles
WHen I setup the VPN connection, it successfully opens the browser and asks me to select my google account, but after selecting the account I'm getting an error message from Google
According to this help section
Verify that the value in the saml:Issuer tag in the SAMLRequest matches the Entity ID value configured in the SAML Service Provider Details section in the Admin console. This value is case-sensitive.
So this is a problem coming from AWS and not from me ? Is Google IdP compatible at all with VPN authentication ? (I found this doc that mentions compatibility with okta)
Edit
Thanks to some of the answers below, I managed to make it work with Google IdP. Here is a screenshot of relevant SAML Google app screens (note that for groups I ended up adding the employees department, but I guess anything else would have worked)
To be able to save an ACS URL starting with http:// in the G Suite interface, use the trick given by teknowlogist: open the inspector > network tab, perform the request to save an URL with https, then right-click copy it as cURL, replace https by http, paste in regular console, and you're good.
I found a workaround to not being able to input http://127.0.0.1:35001 as the ACS URL on the GSuite SAML app page. The Google admin console only does client-side validation for the https requirement, so you can use the Chrome console to monitor the network call made when modifying the ACS URL.
Then, you can copy this as a curl command and change https to http
#Ted Schroeder —
Previous approach (or, plain Google doesn't work)
I just used a reverse proxy:
mitmproxy \
--listen-port 35000 \
--mode 'reverse:http://127.0.0.1:35001' \
--set keep_host_header=true
If you change Google SAML's ACS URL to be https://127.0.0.1:35000 and click "Test SAML Login", Google will take you to https://127.0.0.1:35000, whose traffic will be redirected to http://127.0.0.1:35001. In the browser I get:
Authentication details received, processing details. You may close this window at any time.
However, using the SAML-tracer extension, I found that there was a URL mismatch (https://127.0.0.1:35000 vs. http://127.0.0.1:35001). Seems like the AWS VPN Client is broadcasting its expected URL as being http://127.0.0.1:35001. So this doesn't seem viable.
Current approach (or, Auth0+Google works)
I tried using Auth0 instead, and got it to work! There's a few hoops — for instance, create a new Auth0 application, go to Addons and enable SAML2 Web App, set Application Callback URL to http://127.0.0.1:35001, and then in Settings use the following:
{
"audience": "urn:amazon:webservices:clientvpn",
"mappings": {
"user_id": "http://schemas.xmlsoap.org/ws/2005/05/identity/claims/nameidentifier",
"email": "NameID",
"name": "http://schemas.xmlsoap.org/ws/2005/05/identity/claims/name",
"given_name": "FirstName",
"family_name": "LastName",
"upn": "http://schemas.xmlsoap.org/ws/2005/05/identity/claims/upn",
"groups": "memberOf"
},
"binding": "urn:oasis:names:tc:SAML:2.0:bindings:HTTP-Redirect",
"signResponse": true
}
Then users, if they download the VPN config from AWS and use the AWS VPN Client app, will be taken to an Auth0 login screen where they can login via Google. Voila! (And then for security, you need to add Auth0 Rules to grant only certain users/groups authorization.)
I don't have a full answer yet, but I have the beginnings of one and I actually got past the 403 error above. The key to all this can be found in the AWS Client VPN information here: https://docs.aws.amazon.com/vpn/latest/clientvpn-admin/client-authentication.html
Look for the section entitled "Service provider information for creating an app".
The key is that these are the ACS URL and the Entity ID that need to be used. Unfortunately, G Suite won't let you set the ACS URL to a non-https URL and apparently the AWS Client VPN app won't provide a secure URL for the ACS URL (where the SAML Authenticate response goes).
So, if you set the Entity ID to "urn:amazon:webservices:clientvpn" and have the G Suite SAML app in place according to the instructions, you'll get past the 403. However, since the ACS URL can't be specified you get whatever error message you're likely to get from the ACS URL that the authentication response goes to.
Example scenario
If you set it to https://signon.aws.amazon.com/saml" like you would for AWS Console SSO, you get an error from the AWS sign in that the SAML response was invalid.
And if you set it to https://127.0.0.1:35001 then you get a message from the browser that the "site can't provide a secure connection".
If anybody gets any further with this, I'd love to hear about it. In the meanwhile, I'm going to be looking into non-AWS OpenVPN clients that might actually support G Suite as a SAML IdP.
#alexandergunnarson
Since I don't have the ability to comment (thanks so much for making this easy stackOverflow) I had to edit my answer to get it past the censors.
Unfortunately, we don't have, and probably won't have for some time, G Suite Enterprise because it's too expensive for our startup environment. So OIDP is not a viable option for us now. I figured this would work. Good to know that it does.
I was too having the same issue. In my case, I needed to turn on the two-factor authentication for the account that I was trying to log in with.
I am running a working AWS Cognito service on a frontend application which can successfully do the basic stuff - login, logout, signup, etc..
Right now I am trying to get user attributes through the backend API, such that:
1) The user login in the application and gets a JWT.
2) The JWT is being sent to the backend server.
3) The server has to extract the email of the user by using the access token
The closest thing that I found to what I need is this Cognito service.
So I am making a GET request to "https://mydomain.auth.eu-central-1.amazoncognito.com/oauth2/userInfo"
With Authorization Header as they are asking for, but I keep getting this response:
{
"error": "invalid_token",
"error_description": "Access token does not contain openid scope"
}
I have tried searching for this error but couldn't find any explanation about the error.
Thanks by advance
Erez, are you using a custom UI?
Because the custom UI uses flows that are completely separated from the OAuth2 ones (USER_SRP_AUTH, USER_PASSWORD_AUTH). Tokens that are released with these flows are not OpenID Connect compliant (basically they don't contain the openid scope) so you cannot use them to gather user infos (since the userinfo endpoint is OpenID Connect compliant and needs to be invoked with jwts compliant with OIDC standard).
We're also struggling on that, i'm sorry.
I had this exact problem and it was my fault. I was sending the id_token instead of access_token property of the token.
I program in PHP, so I was sending as header "Authorization: Bearer ".$token->id_token instead of "Authorization: Bearer ".$token->access_token. Now it works.
Hope it helps you or someone.
I am still experiencing the same issue. My problem relies on programmatic use of signIn service (not Hosted UI via federated login) in Amplify framework. After a long googling, I have discovered that this is because "openid" is not including in the scope of token. Only "aws.cognito.signin.user.admin" is included.
You can find a reference here, thread is still open https://github.com/aws-amplify/amplify-js/issues/3732
This solution seems to be fine for me How to verify JWT from AWS Cognito in the API backend?
If I understand correctly, you are successfully getting the #id_token sent to your front end from Cognito (steps 1-3). You can enable scopes on the #id_token by selecting the following options in your Cognito Pool App Client Settings:
I had a similar issue and I spent a couple of hours to find a solution. The access token you received it from cognito in your frontend application you need to send it to your backend then decode it and verify it. here is a good documentation from aws: https://docs.aws.amazon.com/cognito/latest/developerguide/amazon-cognito-user-pools-using-tokens-with-identity-providers.html
I'm trying to hit a web service using RestAssured. I'm struggling with authentication which is actually performed by a third party system. Details are given below:
My web service requires session ID & Cookie in the request header. Otherwise the service call will be failed.
For that I need to fetch Session Id & Cookie after the authentication.
Authentication is done by third party service and it takes the windows credentials for authentication.
When I launch my app URL on browser, say: 'XYZ.com/dim' it will be redirected to authentication service using a URL like:
http://hantweb.DOMAIN.com/authenticate/encdefault.asp?location=XYZ.com/dim
After the authentication it will again be redirected to actual application back.
I tried below code but it says: "401 - Unauthorized: Access is denied due to invalid credentials." even though my credentials are correct.
RestAssured.given().auth().basic("userID", "password").get("http://hantweb.DOMAIN.com/authenticate/encdefault.asp?location=XYZ.com/dim")
I'm confused no idea what I've missed here..
I did some trial and error and finally understood that I need to use .auth().ntlm(userId, password,"","") as the authentication. Here I'm using windows credentials as basic or any other auth type won't work in this case.
This answer can help someone in need.