I need to execute on GPU hardware so I have to create a self-hosted runner for github actions to execute my code. The self-hosted runner is hosted on my local machine (ubuntu 20.04).
I'm running the self hosted runner container locally with -v and binding the socks using: docker run -it --rm -v /var/run/docker.sock:/var/run/docker.sock -e GITHUB_OWNER=<xxx> -e GITHUB_REPOSITORY=<xxxx>-e GITHUB_PAT=<xxxx>
This local self-hosted runner executes successfully until I try to build the second "project" container I need for my project code. I get a permission issue with the docker sock when I try to build the container not run the container. I'm about 70% certain that with the -v binding when running the self-hosted runner locally this enables sibling containers versus Docker in Docker (which I've read isn't cool anymore).
Permission error:
Got permission denied while trying to connect to the Docker daemon socket at unix:///var/run/docker.sock: Post "http://%2Fvar%2Frun%2Fdocker.sock/v1.24/build?buildargs=%7B%7D&cachefrom=%5B%5D&cgroupparent=&cpuperiod=0&cpuquota=0&cpusetcpus=&cpusetmems=&cpushares=0&dockerfile=Dockerfile&labels=%7B%7D&memory=0&memswap=0&networkmode=default&rm=1&shmsize=0&target=&ulimits=null&version=1": dial unix /var/run/docker.sock: connect: permission denied
I've tried building the project container with -v /var/run/docker.sock:/var/run/docker.sock in the docker build command but it doesn't like the -v and I've also tried the following approaches in the "project" docker container:
Approach 1.
useradd -m cnncontainer && \
usermod -aG sudo cnncontainer && \
echo "%sudo ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers
curl -sSL https://get.docker.com/ | sh
usermod -aG docker cnncontainer
Approach 2.
sudo groupadd docker && \
sudo usermod -aG docker "$USER" &&\
newgrp docker
docker run hello-world
Approach 3.
sudo usermod -aG docker $USER
sudo setfacl --modify user:$USER:rw /var/run/docker.sock
docker run hello-world
GitHub actions self-hosted runner Dockerfile:
FROM debian:buster
#tensorflow/tensorflow:2.3.4-gpu - this image doesn't work either
ARG RUNNER_VERSION="2.298.2"
ENV GITHUB_PERSONAL_TOKEN ""
ENV GITHUB_OWNER ""
ENV GITHUB_REPOSITORY ""
RUN apt-get update \
&& apt-get install -y \
curl \
sudo \
git \
jq \
tar \
gnupg2 \
apt-transport-https \
ca-certificates \
&& apt-get clean \
&& rm -rf /var/lib/apt/lists/*
RUN useradd -m github && \
usermod -aG sudo github && \
echo "%sudo ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers
#setup docker runner
RUN curl -sSL https://get.docker.com/ | sh
RUN usermod -aG docker github
USER github
WORKDIR /home/github
#install github actions cli
RUN curl -O -L https://github.com/actions/runner/releases/download/v$RUNNER_VERSION/actions-runner-linux-x64-$RUNNER_VERSION.tar.gz
RUN tar xzf ./actions-runner-linux-x64-$RUNNER_VERSION.tar.gz
RUN sudo ./bin/installdependencies.sh
COPY --chown=github:github entrypoint.sh ./entrypoint.sh
RUN sudo chmod u+x ./entrypoint.sh
ENTRYPOINT ["/home/github/entrypoint.sh"]```
Self-hosted runner entrypoint.sh:
#!/bin/sh
registration_url="https://api.github.com/repos/${GITHUB_OWNER}/${GITHUB_REPOSITORY}/actions/runners/registration-token"
echo "Requesting registration URL at '${registration_url}'"
payload=$(curl -sX POST -H "Authorization: token ${GITHUB_PAT}" ${registration_url})
export RUNNER_TOKEN=$(echo $payload | jq .token --raw-output)
./config.sh \
--name $(hostname) \
--token ${RUNNER_TOKEN} \
--url https://github.com/${GITHUB_OWNER}/${GITHUB_REPOSITORY} \
--work ${RUNNER_WORKDIR} \
--unattended \
--replace
remove() {
./config.sh remove --unattended --token "${RUNNER_TOKEN}"
}
trap 'remove; exit 130' INT
trap 'remove; exit 143' TERM
./run.sh "$*" & #changed from run.sh
### BEGIN
sudo systemctl start docker
sudo systemctl enable docker
export RUNNER_ALLOW_RUNASROOT=true
export AGENT_TOOLSDIRECTORY=/opt/hostedtoolcache
mkdir actions-runner
sudo mkdir /opt/hostedtoolcache
cd actions-runner
# Make /actions-runner/_work
mkdir _work
# Link /opt/hostedtoolcache as /actions-runner/_work/_tool
ln -s /opt/hostedtoolcache _work/_tool
### END
wait $!
Dockerfile I want to run in/with the self-hosted runner
FROM tensorflow/tensorflow:2.3.4-gpu
RUN mkdir -p /app
COPY . main.py /app/
WORKDIR /app
RUN sudo apt install -y make && sudo apt-get install python3-pip -y
RUN pip install -r requirements.txt
RUN sudo usermod -aG docker $USER
RUN sudo setfacl --modify user:$USER:rw /var/run/docker.sock
RUN docker run hello-world
CMD [ "main.py" ]
ENTRYPOINT [ "python" ]
Has anyone ever installed the AWS CloudWatch in the Alpine docker? Seems to me it is not supporting for all the installation packages AWS provided.
https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/download-cloudwatch-agent-commandline.html
We can install in this way:
RUN apk update && apk add ca-certificates curl rpm
RUN wget https://s3.amazonaws.com/amazoncloudwatch-agent/amazon_linux/amd64/latest/amazon-cloudwatch-agent.rpm
RUN rpm -ihv --nodeps ./amazon-cloudwatch-agent.rpm
But it is not functioning correctly. If I want to check its status
~/test # /opt/aws/amazon-cloudwatch-agent/bin/amazon-cloudwatch-agent-ctl -m ec2 -a status
I get the error.
/opt/aws/amazon-cloudwatch-agent/bin/amazon-cloudwatch-agent-ctl: line 469: systemctl: not found
For me, I don't think it is not compatible in Alpine (I am using alpine:3.14). Anyone has some idea on this?
Thanks,
#To install aws-cloudwatch-agent
RUN apk update && apk add ca-certificates curl rpm
RUN wget https://s3.amazonaws.com/amazoncloudwatch-agent/amazon_linux/amd64/latest/amazon-cloudwatch-agent.rpm
RUN rpm -ihv --nodeps ./amazon-cloudwatch-agent.rpm
#To setup repo for k6 and install k6
ENV RUN_IN_CONTAINER="True"
RUN wget https://dl.cloudsmith.io/public/cloudposse-dev/packages/alpine/any-version/main/x86_64/k6-0.34.1-r0.apk
RUN apk add --allow-untrusted k6-0.34.1-r0.apk ```
Thanks in advance!
RD
Seems just need to use the docker multiple stages to build what you want:
If we want to do the integration of K6 and AWS CloudWatch (to make them in one docker files with Alpine.
Checkout git#github.com:grafana/k6.git
Update the docker files to
FROM golang:1.17-alpine as builder_k6
WORKDIR $GOPATH/src/go.k6.io/k6
ADD . .
RUN apk --no-cache add git
RUN CGO_ENABLED=0 go install -a -trimpath -ldflags "-s -w -X go.k6.io/k6/lib/consts.VersionDetails=$(date -u +"%FT%T%z")/$(git describe --always --long --dirty)"
FROM debian:latest as builder_cw
RUN apt-get update && \
apt-get install -y ca-certificates curl && \
rm -rf /var/lib/apt/lists/*
RUN curl -O https://s3.amazonaws.com/amazoncloudwatch-agent/debian/amd64/latest/amazon-cloudwatch-agent.deb && \
dpkg -i -E amazon-cloudwatch-agent.deb && \
rm -rf /tmp/* && \
rm -rf /opt/aws/amazon-cloudwatch-agent/bin/amazon-cloudwatch-agent-config-wizard && \
rm -rf /opt/aws/amazon-cloudwatch-agent/bin/amazon-cloudwatch-agent-ctl && \
rm -rf /opt/aws/amazon-cloudwatch-agent/bin/config-downloader
FROM alpine:latest
COPY --from=builder_cw /tmp /tmp
COPY --from=builder_cw /etc/ssl/certs/ca-certificates.crt /etc/ssl/certs/ca-certificates.crt
COPY --from=builder_cw /opt/aws/amazon-cloudwatch-agent /opt/aws/amazon-cloudwatch-agent
COPY --from=builder_k6 /go/bin/k6 /usr/bin/k6
ADD statsd.json /opt/aws/amazon-cloudwatch-agent/bin/default_linux_config.json
ADD statsd.json /opt/aws/amazon-cloudwatch-agent/etc/statsd.json
ADD credentials /root/.aws/credentials
ADD config /root/.aws/config
#startup the agent
ENV RUN_IN_CONTAINER="True"
ENTRYPOINT ["/opt/aws/amazon-cloudwatch-agent/bin/start-amazon-cloudwatch-agent"]
I've been trying to put aws-cli on an Alpine based docker image I have. I found someone's tips for including the appropriate libraries for glibc here and I was able to make things run smoothly on my docker build. If I call the aws executable in the build process from the intermediate container it's being built on, it works.
After COPYing the aws binary directory to the destination, the files all are transferred, but the aws executable no longer works. I try to do it from either the CMD or docker exec and I just get an error that the file doesn't exist:
Does anyone have any idea what's going on?
This is the docker repo I started with: https://hub.docker.com/r/alfg/nginx-rtmp/. I'm just pasting the aws cli build code below after the ffmpeg FROM block, and adding the COPY --from=2 line further down in this question.
Here is the build section for the aws cli:
FROM alpine:3.11
ENV GLIBC_VER=2.31-r0
# install glibc compatibility for alpine
RUN apk --no-cache add \
binutils \
curl \
&& curl -sL https://alpine-pkgs.sgerrand.com/sgerrand.rsa.pub -o /etc/apk/keys/sgerrand.rsa.pub \
&& curl -sLO https://github.com/sgerrand/alpine-pkg-glibc/releases/download/${GLIBC_VER}/glibc-${GLIBC_VER}.apk \
&& curl -sLO https://github.com/sgerrand/alpine-pkg-glibc/releases/download/${GLIBC_VER}/glibc-bin-${GLIBC_VER}.apk \
&& apk add --no-cache \
glibc-${GLIBC_VER}.apk \
glibc-bin-${GLIBC_VER}.apk \
&& curl -sL https://awscli.amazonaws.com/awscli-exe-linux-x86_64.zip -o awscliv2.zip \
&& unzip awscliv2.zip \
&& aws/install \
&& rm -rf \
awscliv2.zip \
aws \
/usr/local/aws-cli/v2/*/dist/aws_completer \
/usr/local/aws-cli/v2/*/dist/awscli/data/ac.index \
/usr/local/aws-cli/v2/*/dist/awscli/examples \
&& apk --no-cache del \
binutils \
curl \
&& rm glibc-${GLIBC_VER}.apk \
&& rm glibc-bin-${GLIBC_VER}.apk \
&& rm -rf /var/cache/apk/*
And here are the final steps of my Dockerfile which copy the files and update PATH:
COPY --from=0 /usr/local/nginx /usr/local/nginx
COPY --from=0 /etc/nginx /etc/nginx
COPY --from=1 /usr/local /usr/local
COPY --from=1 /usr/lib/libfdk-aac.so.2 /usr/lib/libfdk-aac.so.2
COPY --from=2 /usr/local/aws-cli /usr/local/aws-cli
# Add NGINX path, AWS-CLI path, config and static files.
ENV PATH "${PATH}:/usr/local/nginx/sbin:/usr/local/aws-cli/v2/current/bin"
ADD nginx.conf /etc/nginx/nginx.conf.template
RUN mkdir -p /opt/data && mkdir /www
ADD static /www/static
EXPOSE 1935
EXPOSE 80
CMD envsubst "$(env | sed -e 's/=.*//' -e 's/^/\$/g')" < \
/etc/nginx/nginx.conf.template > /etc/nginx/nginx.conf && \
nginx
The docker build runs succesfully and I can launch containers from the image. I've also put things like aws s3 ls s3://my-public-bucket in the Dockerfile at the end of the aws-cli block, and during the build they run succesfully and can pull from s3.
The only thing I can see wrong in the build is in the image below - it happens during the glibc/aws build, but the build still succesfully completes and the binary is functional afterwards:
/usr/glibc-compat/sbin/ldconfig: /usr/glibc-compat/lib/ld-linux-x86-64.so.2 is not a symbolic link
I'm having a difficult time finding resources for creating a Dockerfile to install a proper PHP, Composer and NGINX environment.
I can create a docker-compose container set, but I cannot get composer installed doing that. If anyone has any good resources to point me to, in order to write a full PHP, Composer and NGINX Dockerfile.
this is my docker file example for a similar scenario, I hope it helps. Feedback and ideas are welcomed !
FROM php:7.4-fpm
# Install system dependencies
RUN apt-get update && apt-get install -y \
git \
curl \
libpng-dev \
libonig-dev \
libxml2-dev \
libzip-dev \
zip \
unzip \
software-properties-common \
lsb-release \
apt-transport-https \
ca-certificates \
wget \
gnupg2
# Clear cache
RUN apt-get clean && rm -rf /var/lib/apt/lists/*
# Install PHP extensions (some are already compiled in the PHP base image)
RUN docker-php-ext-install pdo_mysql mbstring exif pcntl bcmath gd json zip xml
# Get latest Composer
COPY --from=composer:latest /usr/bin/composer /usr/bin/composer
# Create myuser
RUN useradd -G www-data,root -u 1000 -d /home/myuser myuser
RUN mkdir -p /home/myuser/.composer && \
chown -R myuser:myuser /home/myuser
# Set working directory
WORKDIR /var/www/mypage
USER $user
You can add nginx to this container but then, I recommend to use supervisord to control multiple processes.
How can I build a Docker container with Google's Cloud Command Line Tool/SDK?
The script at the url https://sdk.cloud.google.com appears to require user input so doesn't work in a docker file.
Adding the following to my Docker file appears to work.
# Downloading gcloud package
RUN curl https://dl.google.com/dl/cloudsdk/release/google-cloud-sdk.tar.gz > /tmp/google-cloud-sdk.tar.gz
# Installing the package
RUN mkdir -p /usr/local/gcloud \
&& tar -C /usr/local/gcloud -xvf /tmp/google-cloud-sdk.tar.gz \
&& /usr/local/gcloud/google-cloud-sdk/install.sh
# Adding the package path to local
ENV PATH $PATH:/usr/local/gcloud/google-cloud-sdk/bin
Use this one-liner in your Dockerfile:
RUN curl -sSL https://sdk.cloud.google.com | bash
source:
https://docs.docker.com/v1.8/installation/google/
Doing it with alpine:
FROM alpine:3.6
RUN apk add --update \
python \
curl \
which \
bash
RUN curl -sSL https://sdk.cloud.google.com | bash
ENV PATH $PATH:/root/google-cloud-sdk/bin
RUN curl -sSL https://sdk.cloud.google.com > /tmp/gcl && bash /tmp/gcl --install-dir=~/gcloud --disable-prompts
This will download the google cloud sdk installer into /tmp/gcl, and run it with the parameters as follows:
--install-dir=~/gcloud: Extract the binaries into folder gcloud in home folder. Change this to wherever you want, for example /usr/local/bin
--disable-prompts: Don't show any prompts while installing (headless)
To install gcloud inside a docker container please follow the instructions here.
Basically you need to run
RUN apt-get update && \
apt-get install -y curl gnupg && \
echo "deb [signed-by=/usr/share/keyrings/cloud.google.gpg] http://packages.cloud.google.com/apt cloud-sdk main" | tee -a /etc/apt/sources.list.d/google-cloud-sdk.list && \
curl https://packages.cloud.google.com/apt/doc/apt-key.gpg | apt-key --keyring /usr/share/keyrings/cloud.google.gpg add - && \
apt-get update -y && \
apt-get install google-cloud-sdk -y
inside your dockerfile. It's important you are user ROOT when you run this command, so it may necessary to add USER root before the previous command.
As an alternative, you could use the docker image provided by google namely google/cloud-sdk. https://hub.docker.com/r/google/cloud-sdk/
Dockerfile:
FROM centos:7
RUN yum update -y && yum install -y \
curl \
which && \
yum clean all
RUN curl -sSL https://sdk.cloud.google.com | bash
ENV PATH $PATH:/root/google-cloud-sdk/bin
Build:
docker build . -t google-cloud-sdk
Then run gcloud:
docker run --rm \
--volume $(pwd)/assets/root/.config:/root/.config \
google-cloud-sdk gcloud
...or run gsutil:
docker run --rm \
--volume $(pwd)/assets/root/.config:/root/.config \
google-cloud-sdk gsutil
The local assets folder will contain the configuration.
apk upgrade --update-cache --available && \
apk add openssl && \
apk add curl python3 py-crcmod bash libc6-compat && \
rm -rf /var/cache/apk/*
curl https://sdk.cloud.google.com | bash > /dev/null
export PATH=$PATH:/root/google-cloud-sdk/bin
gcloud components update kubectl
I was using Python Alpine image python:3.8.6-alpine3.12 as base and this worked for me:
RUN apk add --no-cache bash
RUN wget https://dl.google.com/dl/cloudsdk/channels/rapid/downloads/google-cloud-sdk-327.0.0-linux-x86_64.tar.gz \
-O /tmp/google-cloud-sdk.tar.gz | bash
RUN mkdir -p /usr/local/gcloud \
&& tar -C /usr/local/gcloud -xvzf /tmp/google-cloud-sdk.tar.gz \
&& /usr/local/gcloud/google-cloud-sdk/install.sh -q
ENV PATH $PATH:/usr/local/gcloud/google-cloud-sdk/bin
After building and running the image, you can check if google-cloud-sdk is installed by running docker exec -i -t <container_id> /bin/bash and running this:
bash-5.0# gcloud --version
Google Cloud SDK 327.0.0
bq 2.0.64
core 2021.02.05
gsutil 4.58
bash-5.0# gsutil --version
gsutil version: 4.58
If you want a specific version of google-cloud-sdk, you can visit https://storage.cloud.google.com/cloud-sdk-release
curl https://sdk.cloud.google.com | bash -s -- --disable-prompts
and export env
works for me
I got this working with Ubuntu 18.04 using:
RUN apt-get install -y curl && curl -sSL https://sdk.cloud.google.com | bash
ENV PATH="$PATH:/root/google-cloud-sdk/bin"
You can use multi-stage builds to make this simpler and more efficient than solutions using curl.
FROM bitnami/google-cloud-sdk:0.392.0 as gcloud
FROM base-image-for-production:tag
# Do what you need to configure your production image
COPY --from=gcloud /opt/bitnami/google-cloud-sdk/ /google-cloud-sdk
This work for me.
FROM php:7.2-fpm
RUN apt-get update -y
RUN apt-get install -y python && \
curl -sSL https://sdk.cloud.google.com | bash
ENV PATH $PATH:/root/google-cloud-sdk/bin
An example using debian as the base image:
FROM debian:stretch
RUN apt-get update && apt-get install -y apt-transport-https gnupg curl lsb-release
RUN export CLOUD_SDK_REPO="cloud-sdk-$(lsb_release -c -s)" && \
echo "cloud SDK repo: $CLOUD_SDK_REPO" && \
echo "deb http://packages.cloud.google.com/apt $CLOUD_SDK_REPO main" | tee -a /etc/apt/sources.list.d/google-cloud-sdk.list && \
curl https://packages.cloud.google.com/apt/doc/apt-key.gpg | apt-key add - && \
apt-get update -y && apt-get install google-cloud-sdk -y
I used most of these examples in some form (thanks #KJoe), but I had to do several other things to setup everything so gcloud would work in the environment. Note that it is preferable to limit the number of lines (it limits layers needed to pull)
Here's a more complete example of Dockerfile with gcloud setup and extending a CircleCI image:
FROM circleci/ruby:2.4.1-jessie-node-browsers
# user is circleci in the FROM image, switch to root for system lib installation
USER root
ENV CCI /home/circleci
ENV GTMP /tmp/gcloud-install
ENV GSDK $CCI/google-cloud-sdk
ENV PATH="${GSDK}/bin:${PATH}"
# do all system lib installation in one-line to optimize layers
RUN curl -sSL https://sdk.cloud.google.com > $GTMP && bash $GTMP --install-dir=$CCI --disable-prompts \
&& rm -rf $GTMP \
&& chmod +x $GSDK/bin/* \
\
&& chown -Rf circleci:circleci $CCI
# change back to the user in the FROM image
USER circleci
# setup gcloud specifics to your liking
RUN gcloud config set core/disable_usage_reporting true \
&& gcloud config set component_manager/disable_update_check true \
&& gcloud components install alpha beta kubectl --quiet
My use case was to generate a google bearer token using the service account, so I wanted the docker container to install gcloud this is how my docker file looks like
FROM google/cloud-sdk
# Setting the default directory in container
WORKDIR /usr/src/app
# copies the app source code to the directory in container
COPY . /usr/src/app
CMD ["/bin/bash","/usr/src/app/token.sh"]
If you need to examine a container after it is built but that isn't running use docker run --rm -it <container-build-id> bash -il and type in gcloud --version if installed correctly or not
In Google documentation you can see the best practice
https://cloud.google.com/sdk/docs/install-sdk
search on the page for "Docker Tip"
eg debian use:
RUN echo "deb [signed-by=/usr/share/keyrings/cloud.google.gpg] http://packages.cloud.google.com/apt cloud-sdk main" | tee -a /etc/apt/sources.list.d/google-cloud-sdk.list && curl https://packages.cloud.google.com/apt/doc/apt-key.gpg | apt-key --keyring /usr/share/keyrings/cloud.google.gpg add - && apt-get update -y && apt-get install google-cloud-cli -y
If you're just interested in getting the gcloud CLI available, add this to your Dockerfile:
# Downloading gcloud package
RUN curl https://dl.google.com/dl/cloudsdk/channels/rapid/downloads/google-cloud-cli-409.0.0-linux-x86_64.tar.gz > /tmp/google-cloud-cli.tar.gz
# Installing the gcloud cli
RUN mkdir -p /usr/local/gcloud \
&& tar -xf /tmp/google-cloud-cli.tar.gz \
&& ./google-cloud-sdk/install.sh --quiet