After I run this SAS SQL process. The date variable "EXVISDAT" showed in the results in a numerical way. How can I change the code to let the date variable "EXVISDAT" show in format of "date9."？
proc sql;
create table test2 as
select VISIT, Targetdays, Targetdays + '01JUL2019'd - 1 as EXVISDAT
from data_in.chrono_visits_lts14424
order by Targetdays
;
quit;
You can read about it in documentation.
In yours case, query will look like:
proc sql;
create table test2 as
select VISIT, Targetdays, Targetdays + '01JUL2019'd - 1 as EXVISDAT format=date9.
from data_in.chrono_visits_lts14424
order by Targetdays
;
quit;
Related
How do i write in sas:
proc sql;
create table THIS as
select *
from MAIN(keep=id col1 -- col34)
where (AT LEAST ONE OF THE COLUMNS contains 1) ;
;
I am having a problem figuring out how to write that last line bc I want to keep all columns so I am not just checking one column i want to check for all of them.
You will have more flexibility if you use a DATA step instead of PROC SQL since you cannot use variable lists in PROC SQL code.
Assuming all of the variables in your list are numeric you could do something like this.
data this;
set main ;
keep id col1 -- col34;
if whichn(1,of col1 -- col34);
run;
Tom is right, the best approach is with a data step. If you are certain you want to do it with SQL though you could do something like this:
proc sql noprint;
create table THIS as
select *
from MAIN(keep=id col1 -- col34)
where sum(col1,col2,col3, ... ,col34)
;
quit;
I have two codes one proc sql and another proc and datastep. Both are interlinked datasets.
Below is the proc sql lines.
create table new as select a.id,a.alid,b.pdate from tb a inner join
tb1 act on a.aid =act.aid left join tb2 as b on (r.alid=a.alid) where
a.did in (15,45); quit;
Below is the proc and datasteps created from above datatset new.
proc sort data = new uodupkey;
by alid;
data new1;
set new;
format ddate date9.
dat1=datepart(today);
datno=input(number,20.);
key=_n_;
rename alid blid;
run;
proc sort data=new1 nodupkey;
by datno dat1;
run;
I need to put everything into single proc sql step.
You mention two data steps but I only see one.
Anyway, your data step and proc sort can indeed be written in one sql query (which you can then insert in your proc sql):
proc sql;
create table new1 as
select id
,alid as blid
,pdate
,datepart(today) as dat1
,input(number,20.) as datno
,monotonic() as key
from new1
group by datno, dat1
having key=min(key)
;
quit;
One remark though. Your data step expects variables called ddate,today and number in your input dataset new. If that dataset is supposed to be the result of your first sql query, then those variables don't exist and their values along with those of dat1 and datno in new1 will always be missing.
Also I assume you misspelled nodupkey on your proc sort.
EDIT: or, to have it all in the same query (if that's what you meant with "the same proc sql"):
proc sql;
create table new1 as
select id
,alid as blid
,pdate
,datepart(today) as dat1
,input(number,20.) as datno
,monotonic() as key
from (
select a.id,a.alid,b.pdate
from tb a
inner join tb1 act
on a.aid =act.aid
left join tb2 as b
on (r.alid=a.alid)
where a.did in (15,45)
)
group by datno, dat1
having key=min(key)
;
quit;
So I have a rather interesting problem. I am trying to insert a current date in specific formats and styles, but for some reason it seems to fail. I know its not a formatting issue... But idk how to fix it. a data step solution is welcomed as well... Here's what works.
proc sql;
create table work.test
(test_Id char(50), test_Name char(50), cur_Mo char(1), cur_Qtr char(1), entered_Date char(8));
insert into work.test
values('201703','2017 Mar','0','0','24APR17')
values('201704','2017 Apr','0','0','24APR17')
values('201706','2017 Jun','1','0','23JUN17');
quit;
Here's what doesn't:
proc sql;
insert into work.test
values(catx('',put(year(today()),4.),case when month(today())< 10 then catx('','0',put(month(today()),2.)) else put(month(today()),2.)end) ,catx(' ',[put(year(today()),4.),put(today(),monname3.))],'1','0',put(today(),date7.));
quit;
You can use the %SYSFUNC() macro function to call most other SAS function in macro code. So to generate today's date in DATE7 format you could use:
insert into work.test (date)
values("%sysfunc(date(),date7)")
;
The way I'd probably do it is to use a data step to make a dataset that you would insert, and then insert that dataset.
You can use insert into (...) select (...) from (...) syntax in SAS, and the data step is much more flexible as to allowing you to define columns.
For example:
proc sql;
create table class like sashelp.class;
quit;
proc sql;
insert into class
select * from sashelp.class;
quit;
Or you can specify only certain variables:
proc sql;
insert into class (name, age)
select name, age from sashelp.class;
quit;
data to_insert;
name= 'Wilma';
sex = 'F';
age = 29;
height = 61.2;
weight = 95.3;
run;
proc sql;
insert into class
select * from to_insert;
quit;
Just make sure you either explicitly list the variables to insert/select, or you have the order exactly right (it matches up by position if you use * like I do above).
I need to create multiple tables using proc sql
proc sql;
/* first city */
create table London as
select * from connection to myDatabase
(select * from mainTable
where city = 'London');
/* second city */
create table Beijing as
select * from connection to myDatabase
(select * from mainTable
where city = 'Beijing');
/* . . the same thing for other cities */
quit;
The names of those cities are in the sas table myCities
How can I embed the data step into proc sql in order to iterate through all cities ?
proc sql noprint;
select quote(city_varname) into :cities separated by ',' from myCities;
quit;
*This step above creates a list as a macro variable to be used with the in() operator below. EDIT: Per Joe's comment, added quote() function so that each city will go into the macro-var list within quotes, for proper referencing by in() operator below.
create table all_cities as
select * from connection to myDatabase
(select * from mainTable
where city in (&cities));
*this step is just the step you provided in your question, slightly modified to use in() with the macro-variable list defined above.
One relatively simple solution to this is to do this entirely in a data step. Assuming you can connect via libname (which if you can connect via connect to you probably can), let's say the libname is mydb. Using a similar construction to Max Power's for the first portion:
proc sql noprint;
select city_varname
into :citylist separated by ' '
from myCities;
select cats('%when(var=',city_varname,')')
into :whenlist separated by ' '
from myCities;
quit;
%macro when(var=);
when "&var." output &var.;
%mend when;
data &citylist.;
set mydb.mainTable;
select(city);
&whenlist.;
otherwise;
end;
run;
If you're using most of the data in mainTable, this probably wouldn't be much slower than doing it database-side, as you're moving all of the data anyway - and likely it would be faster since you only hit the database once.
Even better would be to pull this to one table (like Max shows), but this is a reasonable method if you do need to create multiple tables.
You need to put your proc sql code into a SAS Macro.
Create a macro-variable for City (in my example I called the macro-variable "City").
Execute the macro from a datastep program. Since the Datastep program processes one for each observation, there is no need to create complex logic to iterate.
data mycities;
infile datalines dsd;
input macrocity $ 32.;
datalines;
London
Beijing
Buenos_Aires
;
run;
%macro createtablecity(city=);
proc sql;
/* all cities */
create table &city. as
select * from connection to myDatabase
(select * from mainTable
where city = "&city.");
quit;
%mend;
data _null_;
set mycities;
city = macrocity;
call execute('%createtablecity('||city||')');
run;
Similar to the other solutions here really, maybe a bit simpler... Pull out a distinct list of cities, place into macros, run SQL query within a do loop.
Proc sql noprint;
Select distinct city, count(city) as c
Into :n1-:n999, :c
From connection to mydb
(Select *
From mainTable)
;
Quit;
%macro createTables;
%do a=1 %to &c;
Proc sql;
Create table &&n&a as
Select *
From connection to myDb
(Select *
From mainTable
Where city="&&n&a")
;
Quit;
%end;
%mend createTables;
%createTables;
I have a dataset which has multiple obs per person. I want to have each single record showing the sum of a variable per person ID. However I do not want to group the data into single personal IDs. I hope the example below explains my question
I want to create the column in bold. How to do this? In SAS EG (or SAS if necessary)?
ID...Var1...SUM
X.....10.......30
X.....20.......30
Y.....20.......80
Y.....20.......80
Y.....40.......80
Z.....30.......30
You can do this using either proc sql or proc means
more info:proc means
proc sql
proc sql:
proc sql noprint;
create table new_table as
select distinct id, var1, sum(var_to_sum) as summed_var_name
from old_table
group by id
;
quit;
after rereading your question, using proc means you will need to merge var1 back in, better off using proc sql above.
proc means:
proc means data = old_table sum;
by id var1;
var var_to_sum;
output out = new_table sum;
run;