Problem
I am attempting to install Python 2.7.16, openpyxl, and pyinstaller onto a Windows 10 machine that is offline for security reasons. To clarify, I have a mapped network drive on there from which I can transfer the files I need to use.
Question
What is the best way to go about this? I currently have a .msi Python installation file directly from their website. The packages I need are packaged as .tar.gz files. I currently have those on my windows machine, but do not want to proceed until I know for sure what I need to do. Also, do I need to do anything for dependencies? If so, how do I find the dependencies for the packages I need?
Side Notes
The version of Python (2.7.16) comes with pip. Not sure if that makes a difference. Downloading and transferring things requires me to ask my admin, for him to download the files, and then transfer them to my drive so I can have them on my computer. If able, I would like to do this in as little attempts as possible.
Useful links
Python: https://www.python.org/downloads/release/python-2716/
openpyxl: https://pypi.org/project/openpyxl/#files
pyinstaller: https://pypi.org/project/PyInstaller/#files
My solution would be to seek out the offline versions of the python and pip installer and follow this guide
Also a great tip: try the complete procedure (the installing of the required software) on a seperate pc which you have disconnected and do the installation. Note everything you have to do to get it working and use those instruction on your originally intended machine. This will prevent you from having to go back and forth and scratch your head while installing on the target machine.
Please note that I have NO idea how python works and this is just a hunch from me as a programmer.
Installing Python and packages on an Offline Machine: A Comprehensive Guide
The Environment
Let us begin by defining the environment in which this guide may be of some great use. If your situation can be described by one or more of the following, you might have great results following this guide...
The machine you are developing on is offline. (No connection to the internet)
You need to develop and run Python on the machine that is completely offline.
If this sounds like you, read the following cases in which a few minor details may make a big difference in getting you started.
Case1:
You are not allowed to plug in any external media devices into the offline machine. This includes but is not limited to a USB, CD, floppy disk, or any other removable media that may be of some use in helping you transfer Python files to the offline machine.
You are allowed to map a network drive (somewhere else on the local network). This would fix the problem mentioned in number one with removable media.
Answer: In this case, just proceed with the guide, as this was my case and I will explain in detail how I solved my problem.
Case2:
There is no physical way to transfer files onto the development machine that is offline.
Answer: If this is your case, you need to get in touch with the admin team who handles the software on your development machine. Direct them to this guide to proceed.
Let's Get Started
Warning A:
The following must be performed on a computer with an internet connection. It is impossible to download things from any website without an internet connection.
Warning B:
There is a longer way, and there is a shorter way to do the following. To avoid the longer way, you must be able to install python on a different machine that is online. This can be the same machine that you are using to download the packages and python version, or it can even be a home machine. This can be any machine in the world that is on the internet. It's sole purpose will be to help you identify the dependencies of each package.
Installing Python
Visit the python website and identify the version you want. 2.7.9 and up is recommended for this guide. Download the file for your specific system.
Python 2.7.9 : https://www.python.org/downloads/release/python-279/
Python 3.7.3 : https://www.python.org/downloads/release/python-373/
The reason I provided Python 2.7.9 is because that is the earliest 2.7.x version that comes with pip (a package manager).
Visit the python package index to locate the packages you will be using in your python project. https://pypi.org/
Search the package you need, go to the downloads, and get the (.tar.gz) file. Not the .whl files unless you know what you are doing with those.
Tip: If you want to keep track of the packages you are installing, I suggest you put them all in one folder somewhere you can find, or just write them down on paper.
Unpack the .tar.gz package files. You can get rid of the .tar.gz once you unpack them as they will not needed any longer.
Install the version of python that you downloaded for your system in step 1 above.
(This may just be running the .msi file for windows or unpacking some files for linux) If you are not sure how, just look at this brilliant guide
https://realpython.com/installing-python/
Now you should be able to go to your terminal and type "python" and get the python interpreter to open up. If you get a "cannot find python command" you need to setup your path variable.
Windows guide: https://geek-university.com/python/add-python-to-the-windows-path/
Linux guide: https://www.tutorialspoint.com/python/python_environment.htm
Your python installation is done! And your packages should also be ready to install!
Installing Python Packages
What you need to know here is that MOST all python packages have dependencies, which are other packages which packages need installed before they can be installed. If you need more explanation on dependencies, read here: https://www.fullstackpython.com/application-dependencies.html
Before proceeding be sure to add the Python/Scripts folder to your path variable too or pip will not work. Follow this link for instructions. https://appuals.com/fix-pip-is-not-recognized-as-an-internal-or-external-command/
Install packages using pip install [package_name] for every package you need, on your machine that is on the internet, and then do a pip freeze to see all the packages installed.
Once you can see all the packages installed, which will include the dependencies for the ones you ran pip install on, you need to manually download these dependencies from the python package index https://pypi.org/ just like you did with the regular packages.
Moving Offline
Once you have identified all the packages you will need, and all of their dependencies, you will need to download them, unpack all of them, and move them into one folder, which I will call "OFFLINE_SETUP_FOLDER".
To be clear:
The packages we installed before was only to find out the dependencies we were going to need. You do not have to re-download the packages you have already downloaded before running pip install. You should only need to download the dependencies you have found during the pip freeze command.
Finally you need to copy into the "OFFLINE_SETUP_FOLDER" your python installation file, be it a .msi file for windows, or the .tar file for linux.
Your "OFFLINE_SETUP_FOLDER" should contain the following...
In the following, package can be the name of any package that you downloaded, and the a and b inpackage1a and package1b just represent dependencies for that package. These file names are just examples for packages
python.msi (installation file for python)
/package1 (normal package folder)
/package1a (package dependency folder)
/package1b (package dependency folder)
/package2 (normal package folder)
/package3 (normal package folder)
/package3a (package dependency folder)
Once this is complete, you need to move that folder onto the machine that is completely offline form the network.
Then run the installation for python as you did before and install it on the machine. Do no forget to setup the path variable. Refer back to the Installing Python section if needed.
Open your terminal or CMD and CD into the "OFFLINE_SETUP_FOLDER".
Now you need to CD into each individual package folder, and run this command: python setup.py install and let it run.
If the package install fails, it will be because one of the dependencies has not been installed. If this is the case, CD into the dependency that is says is missing, and run python setup.py install in there first.
Keep repeating these steps until all packages and dependencies have been installed.
This is the end of this python guide for installing python on an offline machine. I hope this helped :)
Related
I have been struggling to find the source code of superset package when I install it in virtual environment. I followed superset installation guide and then proceeded via virtual env.
Here are my virtual environment files:
I thought it will be in site-packages and so I navigated there also but found this (for both lib and lib64 folder):
Similarly for lib64:
Unlike the github file, there's no superset-frontend for customization as well. Does anyone know where can we locate these superset files?
You probably have the compiled version, a binary file, as follows: venv/bin/superset. So when you use superset, it runs an optimized executable. The source files are at venv/lib/python3.6/site-packages/superset/. The pip install apache-superset route is a quick out-of-the-box version of the install, it's not meant for customizing, so you'll change stuff but you won't see it reflected.
If you want to customize superset you have to clone the github repo and follow these instructions for installation, which involve installing superset in editable mode! They explain how to install and run the frontend for dev work too. Don't skip the OS Dependencies part, I did the first time I installed it and you'll waste time at the long run!
If you are sure it was installed in a virtual environment it should be under envs/env/lib/python3.6/site-packages/superset. If it doesn't exist there then it was installed in another location, please check and confirm
I've noticed that after the packages required written in "requirements.txt" were installed they are not installed anymore every time I push changes into the Heroku application I'm working, so I was assuming that those files were not modified anymore.
I then changed a file in /app/.heroku/python/lib/python2.7/site-packages/target_library/target_file but when I do git push the file goes back to its original state, although the library is not being installed again.
Is there a way to avoid libraries to be reseted or any workaround?
Based on the last answer.
or fork the library on GitHub and install the forked version.
Here are the few steps I've tested and it worked for me:
1- Fork the package repo on GitHub.
2- Edit it and change whatever you need.
3- Now remove the original package name from your requirments.txt and replace it with git+https://github.com/you-github-username/forked-edited-package.git
Now it should simply install the edited package to your Heroku dyno when you deploy the project
No this can't possibly work. Heroku will always install the packages directly from PyPI and won't know anything about your modifications. I don't know why you say they aren't installed again - on the contrary, they are.
Are you sure you really need to do this? It's a fairly unusual thing to do. If you are sure you do, then the only thing to do is to either for the files into your own project, or fork the library on GitHub and install the forked version.
I'm new to Python, but I had a requirement at my work-place. Another programmer is developing a project on Python, Django framework, and my task is to find a way in which this project will be executed at any computer.
So, I'm talking about something like Composer for PHP. I need an easiest way that at debian branch to write in terminal a command, that will find kind of "composer.json" file on that project, will read all the required software, modules, libraries and install it step-by-step on PC.
Any ideas how to do it in the easiest way? Thanks.
Since you have not talked about virtual environment, assumed that you already setup the environment and activated it.First get all the libraries lists in requirement.txt file in your project directory by typing below command,
pip freeze > requirements.txt
when you need to setup project in another system just run this
pip install -r requirements.txt
All the dependency will be installed in your project enviornment.
Using pip freeze > requirements.txt is an anti-pattern. It does some things right, such as pinning version numbers, but it can lead to problems with orphan packages later.
I use pip-tools, this way only your top level dependencies are placed in your requirements.in file and then I use pip-sync to sync my local environment with pip.
There's a lot more information on pip best practices in my 2016 Pycon UK talk - Avoiding the "left pad" problem: How to secure your pip install process
in python there is requirements.text file which take care of the libraries that is used in that project. You should also use the virtualenv
Can I use apt-get or other package managers in Cloud Foundry buildpacks or .profile scripts that come with apps; and if I can, how to do it? I expect to do it the same way as in a dockerfile, but it doesn't work with or without sudo in my case.
Can I use apt-get or other package managers in Cloud Foundry buildpacks or .profile scripts that come with apps; and if I can, how to do it?
No. Running apt-get or a package manager would typically require root access and you do not get root access when the build pack runs or when your application runs (this is a difference w/Docker).
That said, you can do anything that doesn't require root access, so if you found a package manager that installed in the vcap user's home directory and didn't need root then you could use that.
It depends on what you're trying to install, but in some cases you can work around this by downloading the .deb or .rpm file and manually extracting the binaries. This typically works OK for things like shared libraries. Just download the precompiled binary that matches your stack (cflinuxfs2 == Ubuntu Trusty). For other things, you can build your own binaries from source. This is what the build pack's do, see binary-builder.
Hope that helps!
I have to deploy a Django application onto a SuSE Linux Enterprise 11 system. Corporate rules say I need to deploy using RPMs only. While I can use ./setup.py bdist_rpm for each dependency, it's not really sane, since RPM doesn't record all of the dependencies yet. Therefore I'd have no real advantage in using RPMs and managing dependencies manually is somewhat cumbersome and I would like to avoid it.
Now I had the following idea: While building a package, I could create a virtualenv, install all my dependencies via pip there and then package it up with the rest of the code into one solid RPM.
How sensible is this approach?
I've been using this approach for about a year now and it has worked out pretty well.
One gotcha is that you'll want to check out the bang lines in any python scripts written to the virtualenv's bin directory. These will end up being full path names used in your build environment, which probably won't be the same directory where you end up installing the virtualenv. So you may need to add some sed calls in your RPM's postinstall to adjust the paths.