While deploying my application on iOS Simulator it works without any problems, but when I attached iPhone 5 on the Mac, deploying to that device results in following errors from Visual Studio's debug console:
Tool /Library/Frameworks/Xamarin.iOS.framework/Versions/Current/bin/mtouch execution started with arguments: --cache [... paths and arguments ...]
AOT Compilation exited with code 1, command:
MONO_PATH= [...path...]
The assembly mscorlib.dll was not found or could not be loaded.
1> It should have been installed in the `/Users/builder/data/lanes/3969/7beaef43/source/xamarin-macios/builds/install/cross64/lib/mono/4.5/mscorlib.dll' directory.
Xamarin.iOS.Common.targets(696,3): error : Could not AOT the assembly '/Users/blagoja/Library/Caches/Xamarin/mtbs/builds/MobApp.iOS/1be55aeb91c215df9342d3daa452982b/C:/Users/xxx/AppData/Local/Temp/vsF8C6.tmp/iPhone/Debug/mtouch-cache/64/Build/System.dll'
So fifth sentence (or sixth line) is saying that 'mscorlib.dll' could not be found at specified path, but from showed path where it should reside, on my mac i see only first directory 'Users'... nothing else.
So yeah, i belive i should put there the 'mscorlib.dll' but copy-paste is the right choice?
Also i managed to find multiple versions for mscorlib.dll into Developer/Frameworks/Mono.framework/Versions/{version}/lib/mono/{mono_versions}/mscordlib.dll. So maybe the configuration has path mismatches?
I tried to install workspace-d on Windows 10 using Administrator privilege but failed.
Here is the error message.I haved installed dmd, dub and git.
PS C:\Users\U\Desktop\workspace-d-installer> .\workspace-d-installer.exe
Welcome to the workspace-d installation guide.
Make sure, you have dmd, dub and git installed.
Which external components do you want to install?
[1] DCD - auto completion
[2] DScanner - code linting
[3] dfmt - code formatting
Enter a comma separated list of numbers
Selected [all]:
Cloning workspace-d into C:\Users\U\AppData\Local\Temp\workspaced-install-635958600835730563
Checking out v2.6.0
Compiling...
Error: Error writing file '..\..\..\..\..\..\U\AppData\Roaming\dub\packages\painlesstraits-0.1.0\.dub\build\library-release-windows-x86-dmd_2071-92537C3AEFB87AC450BFCCEE2ECBED44\painlesstraits.lib'
dmd failed with exit code 1.
Error while compiling workspace-d.
This is a bug with workspace-d-installer. Even though it just runs the shell commands, it has some permission problems on windows. I have opened an issue on the project page if you want to do anything on it: https://github.com/Pure-D/workspace-d-installer/issues/2
The only solution right now is to manually clone each repository (workspace-d, dfmt, dscanner, dcd) and follow their build instructions. I'm trying to fix that issue so you can use workspace-d-installer.
I am getting an error:
"Error occurred during initialization of VM
Unable to load native library: Can't find dependent libraries"
The error arises when I try to execute my exe file.
I have created exe file through pyinstaller on a django application. Application uses pylucine library. I think it may be the issue of error.
How to fix the error?
Since I can't be certain given you've provided very few details here is a shot in the dark to help solve your problem:
First, try removing the jvm.dll file that gets packaged with the pyinstaller -D youmodule.py command (for now work with the directory command rather than -F option). The reason why is here.
With that jvm.dll file gone, you should start seeing the actual error code - and with that the java class or dependency that isn't being loaded.
If it's a java class that isn't being properly loaded then you know instantly it must not be correcly represented in the classpath environment variable and you should do everything in your power to make sure it is:
e.g.: os.environ['CLASSPATH'] += 'the/path/to/the/jar'
Otherwise, consider bulking up your question with more details, especially if you can get a more meaningful error output.
I had the same error trying to run a .exe built with PyInstaller through wine.
My problem went away by adding C:\Program Files\Java\ [your jdk version here] \jre\bin\server to the PATH environment variable in wine - I suppose it might be the same in Windows.
It also reappeared if I tried to build with C:\Program Files\Java\ [your jdk version here] \jre\bin\server in my PATH, so I had to build without it and then append it before running it (I have no explanation as to why this happens).
Just installed Android Studio to give it a try. I'm trying to create a test module for my application and, whatever the method I use, I always get the following error: "Error: No AndroidManifest.xml file found in the main project directory...".
Methods I use:
1) from Android Studio: New > Module > Test Module
2) from command line: android create test-project -m "main_path" -n "project_name" -p "test_path"
Any ideas on how to solve this?
Edit: As of 0.1.8 this is now supported in the IDE.
According to the documentation for the new build system a separate project is no longer needed, which implies that a separate module may not be either. That said, getting test working within the IDE is still problematic. I've posted an answer here that at least works for running tests from the command line.
I recently reinstalled Cygwin on my computer in order to get access to several command line elements that I was missing. I have never had previous difficulty with Cygwin, but after this reinstallation, an error message continues to appear after (almost) each command entered. For instance:
-bash-4.1$ wc m1.txt
3 [main] bash 2216 child_info_fork::abort: data segment start: parent(0x26D000) != child(0x38D000)
-bash: fork: retry: Resource temporarily unavailable
2013930 4027950 74968256 m1.txt
Generally, the command still runs (as seen above), but not always. Occasionally, the 'error' message occurs several times in a row (the initial number "3" will then change to a "4" or "2", notably if I start a second Cygwin window.
Also, as soon as I start up Cygwin, I get the following message before the prompt:
3 [main] bash 6140 child_info_fork::abort: data segment start: parent(0x26D000) != child(0x36D000)
-bash: fork: retry: Resource temporarily unavailable
-bash: fork: Resource temporarily unavailable
-bash-4.1$
At the moment, I am debating whether to uninstall/reinstall Cygwin again or just live with the error messages, but I was curious if there might be an issue that I am unaware of.
(assuming Cygwin is installed at C:\Cygwin):
Open Task Manager and close any processes that look to be Cygwin related.
Open C:\Cygwin\bin in Windows Explorer
Verify that dash.exe, ash.exe, rebase.exe, and rebaseall exist in this folder
If any of them are missing, re-run Cygwin setup and select the dash, ash, and rebase packages
right-click your C:\Cygwin folder, uncheck Read-only (if its checked), and press OK.
When an error about not being able to switch some files comes up, select "Ignore All". Wait for this process to complete.
Browse to C:\Cygwin\bin in Windows Explorer
Right click dash.exe and click "Run as Administrator". A command Prompt should appear with nothing but a $
Type /usr/bin/rebaseall -v, hit enter, and wait for the process to complete.
If you get errors about Cygwin processes running, try Step 1 again. If that still doesn't work, Restart your computer into safe mode and try these steps again.
A commenter noted that, depending on your settings, you may have to type cd /usr/bin && ./rebaseall -v instead.
Try opening Cygwin again.
This process worked for me. I hope it works for you guys too.
Source: http://cygwin.wikia.com/wiki/Rebaseall
I would like to add the following to the above answers, as it is what I had to do after reinstalling Cygwin:
Navigate to the "/usr/bin" directory (usually, C:\cygwin\bin) and right click, Run as Administrator the file: dash.exe
Then, at the $ prompt type the following, hitting enter after each line:
cd /usr/bin/
/usr/bin/peflags * -d 1
/usr/bin/rebaseall -v
What it does is, it marks the dll's as "rebase-able," and then rebases them. You have to have peflags.exe in addition to the above files (in previous answers). You may have to restart windows after doing this and you will definitely need to make sure that there are no processes nor services belonging to cygwin running. (Use task manager, kill any related processes, and then under the services tab look for any service starting with CYG and stop it.)
After doing this, I was able to get cygwin to run without any errors about dll's being loaded to the wrong addresses aka fork errors, etc.
I hope that this helps others, as it was a pain to find.
SOURCE: http://www.cygwin.com/faq.html#faq.using.fixing-fork-failures
and the rebase README file.
To add on to other answers here, we ran into the same issue but could not run the rebase command from the ash or dash shell. However, when launching the command from the Windows cmd shell, the following worked.
cmd /c "C:\cygwin64\bin\ash.exe /usr/rebaseall -v"
-v is to get verbose output
I found another information here :
http://cygwin.com/ml/cygwin/2014-02/msg00531.html
You have to delete the database at
/etc/rebase.db* and do in a "ash" windows :
peflags * -d 1
rebaseall
It works for me on 2 servers.
I solved this problem by restarting my computer. Probably installed a driver update and kept using sleep instead of shutting down.
Experienced the same issue when loading Cygwin with cygiconv-2.dll forking and not loading successfully in the Cygwin terminal, but after turning off my AntiVirus (it was specifically Ad-aware), the issue resolved, and Cygwin worked properly.
In case you are using babun's Cygwin, after rebaseall, try launching Cygwin by executing .babun\cygwin\cygwin.bat in a Windows command prompt or Windows explorer.
This works for me (while launching babun's default console - mintty results in fork error).
I had the error on win10 and i was trying to rebase to c: before install.
then i saw that the installer was installing it instead to c:/Users/myuser
so i was coping all files from c:/Users/myuser to c:.badun
and then restart plus open badun.bat
not shure if this was wise its now duplicated XD... but then it worked again.
Rebaseing didn't help in my case. In addition to what other people suggested, I noticed that reducing the length of PATH environment variable fixed the issue for me (and for other people as well as can be seen from this answer).
This issue is intermittent in nature & I found this issue when there is network is too slow to connect to remote machine on AWS.... I have Shell script that runs through Gitbash shell & it connects to AWS EC2 instance with ssh..... Most of the time, it ran correctly but 2 out 100 times it get into this issue bash: fork: retry: Resource temporarily unavailable .... Killing the MSYS2 terminal from task manager helps to overcome with this issue....
Negative side is you need to run the scripts from the beginning...
I had the same issue on Windows 10 and the mobaxterm app (which uses cygwin) and I tried all of answers listed here however for me, the solution was to simply delete the "CryptoPro CSP" application.
I started facing this problem after upgrading to windows 10. As of now I do not see that any of the above method working.
What I am noticing is that if you start cygwin with admin right (right click and say "run as admin") then it works fine.
Or you open cmd as administrator and then launch cygwin from there, then also it runs fine.
Just reinstall cygwin and select TCL and activate EXPECT