Related
What is a smart pointer and when should I use one?
UPDATE
This answer is rather old, and so describes what was 'good' at the time, which was smart pointers provided by the Boost library. Since C++11, the standard library has provided sufficient smart pointers types, and so you should favour the use of std::unique_ptr, std::shared_ptr and std::weak_ptr.
There was also std::auto_ptr. It was very much like a scoped pointer, except that it also had the "special" dangerous ability to be copied — which also unexpectedly transfers ownership.
It was deprecated in C++11 and removed in C++17, so you shouldn't use it.
std::auto_ptr<MyObject> p1 (new MyObject());
std::auto_ptr<MyObject> p2 = p1; // Copy and transfer ownership.
// p1 gets set to empty!
p2->DoSomething(); // Works.
p1->DoSomething(); // Oh oh. Hopefully raises some NULL pointer exception.
OLD ANSWER
A smart pointer is a class that wraps a 'raw' (or 'bare') C++ pointer, to manage the lifetime of the object being pointed to. There is no single smart pointer type, but all of them try to abstract a raw pointer in a practical way.
Smart pointers should be preferred over raw pointers. If you feel you need to use pointers (first consider if you really do), you would normally want to use a smart pointer as this can alleviate many of the problems with raw pointers, mainly forgetting to delete the object and leaking memory.
With raw pointers, the programmer has to explicitly destroy the object when it is no longer useful.
// Need to create the object to achieve some goal
MyObject* ptr = new MyObject();
ptr->DoSomething(); // Use the object in some way
delete ptr; // Destroy the object. Done with it.
// Wait, what if DoSomething() raises an exception...?
A smart pointer by comparison defines a policy as to when the object is destroyed. You still have to create the object, but you no longer have to worry about destroying it.
SomeSmartPtr<MyObject> ptr(new MyObject());
ptr->DoSomething(); // Use the object in some way.
// Destruction of the object happens, depending
// on the policy the smart pointer class uses.
// Destruction would happen even if DoSomething()
// raises an exception
The simplest policy in use involves the scope of the smart pointer wrapper object, such as implemented by boost::scoped_ptr or std::unique_ptr.
void f()
{
{
std::unique_ptr<MyObject> ptr(new MyObject());
ptr->DoSomethingUseful();
} // ptr goes out of scope --
// the MyObject is automatically destroyed.
// ptr->Oops(); // Compile error: "ptr" not defined
// since it is no longer in scope.
}
Note that std::unique_ptr instances cannot be copied. This prevents the pointer from being deleted multiple times (incorrectly). You can, however, pass references to it around to other functions you call.
std::unique_ptrs are useful when you want to tie the lifetime of the object to a particular block of code, or if you embedded it as member data inside another object, the lifetime of that other object. The object exists until the containing block of code is exited, or until the containing object is itself destroyed.
A more complex smart pointer policy involves reference counting the pointer. This does allow the pointer to be copied. When the last "reference" to the object is destroyed, the object is deleted. This policy is implemented by boost::shared_ptr and std::shared_ptr.
void f()
{
typedef std::shared_ptr<MyObject> MyObjectPtr; // nice short alias
MyObjectPtr p1; // Empty
{
MyObjectPtr p2(new MyObject());
// There is now one "reference" to the created object
p1 = p2; // Copy the pointer.
// There are now two references to the object.
} // p2 is destroyed, leaving one reference to the object.
} // p1 is destroyed, leaving a reference count of zero.
// The object is deleted.
Reference counted pointers are very useful when the lifetime of your object is much more complicated, and is not tied directly to a particular section of code or to another object.
There is one drawback to reference counted pointers — the possibility of creating a dangling reference:
// Create the smart pointer on the heap
MyObjectPtr* pp = new MyObjectPtr(new MyObject())
// Hmm, we forgot to destroy the smart pointer,
// because of that, the object is never destroyed!
Another possibility is creating circular references:
struct Owner {
std::shared_ptr<Owner> other;
};
std::shared_ptr<Owner> p1 (new Owner());
std::shared_ptr<Owner> p2 (new Owner());
p1->other = p2; // p1 references p2
p2->other = p1; // p2 references p1
// Oops, the reference count of of p1 and p2 never goes to zero!
// The objects are never destroyed!
To work around this problem, both Boost and C++11 have defined a weak_ptr to define a weak (uncounted) reference to a shared_ptr.
Here's a simple answer for these days of modern C++ (C++11 and later):
"What is a smart pointer?"
It's a type whose values can be used like pointers, but which provides the additional feature of automatic memory management: When a smart pointer is no longer in use, the memory it points to is deallocated (see also the more detailed definition on Wikipedia).
"When should I use one?"
In code which involves tracking the ownership of a piece of memory, allocating or de-allocating; the smart pointer often saves you the need to do these things explicitly.
"But which smart pointer should I use in which of those cases?"
Use std::unique_ptr when you want your object to live just as long as a single owning reference to it lives. For example, use it for a pointer to memory which gets allocated on entering some scope and de-allocated on exiting the scope.
Use std::shared_ptr when you do want to refer to your object from multiple places - and do not want your object to be de-allocated until all these references are themselves gone.
Use std::weak_ptr when you do want to refer to your object from multiple places - for those references for which it's ok to ignore and deallocate (so they'll just note the object is gone when you try to dereference).
There is a proposal to add hazard pointers to C++26, but for now you don't have them.
Don't use the boost:: smart pointers or std::auto_ptr except in special cases which you can read up on if you must.
"Hey, I didn't ask which one to use!"
Ah, but you really wanted to, admit it.
"So when should I use regular pointers then?"
Mostly in code that is oblivious to memory ownership. This would typically be in functions which get a pointer from someplace else and do not allocate nor de-allocate, and do not store a copy of the pointer which outlasts their execution.
UPDATE:
This answer is outdated concerning C++ types which were used in the past.
std::auto_ptr is deprecated and removed in new standards.
Instead of boost::shared_ptr the std::shared_ptr should be used which is part of the standard.
The links to the concepts behind the rationale of smart pointers still mostly relevant.
Modern C++ has the following smart pointer types and doesn't require boost smart pointers:
std::shared_ptr
std::weak_ptr
std::unique_ptr
There is also 2-nd edition of the book mentioned in the answer: C++ Templates: The Complete Guide 2nd Edition by David Vandevoorde Nicolai, M. Josuttis, Douglas Gregor
OLD ANSWER:
A smart pointer is a pointer-like type with some additional functionality, e.g. automatic memory deallocation, reference counting etc.
A small intro is available on the page Smart Pointers - What, Why, Which?.
One of the simple smart-pointer types is std::auto_ptr (chapter 20.4.5 of C++ standard), which allows one to deallocate memory automatically when it out of scope and which is more robust than simple pointer usage when exceptions are thrown, although less flexible.
Another convenient type is boost::shared_ptr which implements reference counting and automatically deallocates memory when no references to the object remains. This helps avoiding memory leaks and is easy to use to implement RAII.
The subject is covered in depth in book "C++ Templates: The Complete Guide" by David Vandevoorde, Nicolai M. Josuttis, chapter Chapter 20. Smart Pointers.
Some topics covered:
Protecting Against Exceptions
Holders, (note, std::auto_ptr is implementation of such type of smart pointer)
Resource Acquisition Is Initialization (This is frequently used for exception-safe resource management in C++)
Holder Limitations
Reference Counting
Concurrent Counter Access
Destruction and Deallocation
Definitions provided by Chris, Sergdev and Llyod are correct. I prefer a simpler definition though, just to keep my life simple:
A smart pointer is simply a class that overloads the -> and * operators. Which means that your object semantically looks like a pointer but you can make it do way cooler things, including reference counting, automatic destruction etc.
shared_ptr and auto_ptr are sufficient in most cases, but come along with their own set of small idiosyncrasies.
A smart pointer is like a regular (typed) pointer, like "char*", except when the pointer itself goes out of scope then what it points to is deleted as well. You can use it like you would a regular pointer, by using "->", but not if you need an actual pointer to the data. For that, you can use "&*ptr".
It is useful for:
Objects that must be allocated with new, but that you'd like to have the same lifetime as something on that stack. If the object is assigned to a smart pointer, then they will be deleted when the program exits that function/block.
Data members of classes, so that when the object is deleted all the owned data is deleted as well, without any special code in the destructor (you will need to be sure the destructor is virtual, which is almost always a good thing to do).
You may not want to use a smart pointer when:
... the pointer shouldn't actually own the data... i.e., when you are just using the data, but you want it to survive the function where you are referencing it.
... the smart pointer isn't itself going to be destroyed at some point. You don't want it to sit in memory that never gets destroyed (such as in an object that is dynamically allocated but won't be explicitly deleted).
... two smart pointers might point to the same data. (There are, however, even smarter pointers that will handle that... that is called reference counting.)
See also:
garbage collection.
This stack overflow question regarding data ownership
A smart pointer is an object that acts like a pointer, but additionally provides control on construction, destruction, copying, moving and dereferencing.
One can implement one's own smart pointer, but many libraries also provide smart pointer implementations each with different advantages and drawbacks.
For example, Boost provides the following smart pointer implementations:
shared_ptr<T> is a pointer to T using a reference count to determine when the object is no longer needed.
scoped_ptr<T> is a pointer automatically deleted when it goes out of scope. No assignment is possible.
intrusive_ptr<T> is another reference counting pointer. It provides better performance than shared_ptr, but requires the type T to provide its own reference counting mechanism.
weak_ptr<T> is a weak pointer, working in conjunction with shared_ptr to avoid circular references.
shared_array<T> is like shared_ptr, but for arrays of T.
scoped_array<T> is like scoped_ptr, but for arrays of T.
These are just one linear descriptions of each and can be used as per need, for further detail and examples one can look at the documentation of Boost.
Additionally, the C++ standard library provides three smart pointers; std::unique_ptr for unique ownership, std::shared_ptr for shared ownership and std::weak_ptr. std::auto_ptr existed in C++03 but is now deprecated.
Most kinds of smart pointers handle disposing of the pointer-to object for you. It's very handy because you don't have to think about disposing of objects manually anymore.
The most commonly-used smart pointers are std::tr1::shared_ptr (or boost::shared_ptr), and, less commonly, std::auto_ptr. I recommend regular use of shared_ptr.
shared_ptr is very versatile and deals with a large variety of disposal scenarios, including cases where objects need to be "passed across DLL boundaries" (the common nightmare case if different libcs are used between your code and the DLLs).
Here is the Link for similar answers : http://sickprogrammersarea.blogspot.in/2014/03/technical-interview-questions-on-c_6.html
A smart pointer is an object that acts, looks and feels like a normal pointer but offers more functionality. In C++, smart pointers are implemented as template classes that encapsulate a pointer and override standard pointer operators. They have a number of advantages over regular pointers. They are guaranteed to be initialized as either null pointers or pointers to a heap object. Indirection through a null pointer is checked. No delete is ever necessary. Objects are automatically freed when the last pointer to them has gone away. One significant problem with these smart pointers is that unlike regular pointers, they don't respect inheritance. Smart pointers are unattractive for polymorphic code. Given below is an example for the implementation of smart pointers.
Example:
template <class X>
class smart_pointer
{
public:
smart_pointer(); // makes a null pointer
smart_pointer(const X& x) // makes pointer to copy of x
X& operator *( );
const X& operator*( ) const;
X* operator->() const;
smart_pointer(const smart_pointer <X> &);
const smart_pointer <X> & operator =(const smart_pointer<X>&);
~smart_pointer();
private:
//...
};
This class implement a smart pointer to an object of type X. The object itself is located on the heap. Here is how to use it:
smart_pointer <employee> p= employee("Harris",1333);
Like other overloaded operators, p will behave like a regular pointer,
cout<<*p;
p->raise_salary(0.5);
Let T be a class in this tutorial
Pointers in C++ can be divided into 3 types :
1) Raw pointers :
T a;
T * _ptr = &a;
They hold a memory address to a location in memory. Use with caution , as programs become complex hard to keep track.
Pointers with const data or address { Read backwards }
T a ;
const T * ptr1 = &a ;
T const * ptr1 = &a ;
Pointer to a data type T which is a const. Meaning you cannot change the data type using the pointer. ie *ptr1 = 19 ; will not work. But you can move the pointer. ie ptr1++ , ptr1-- ; etc will work.
Read backwards : pointer to type T which is const
T * const ptr2 ;
A const pointer to a data type T . Meaning you cannot move the pointer but you can change the value pointed to by the pointer. ie *ptr2 = 19 will work but ptr2++ ; ptr2-- etc will not work. Read backwards : const pointer to a type T
const T * const ptr3 ;
A const pointer to a const data type T . Meaning you cannot either move the pointer nor can you change the data type pointer to be the pointer. ie . ptr3-- ; ptr3++ ; *ptr3 = 19; will not work
3) Smart Pointers : { #include <memory> }
Shared Pointer:
T a ;
//shared_ptr<T> shptr(new T) ; not recommended but works
shared_ptr<T> shptr = make_shared<T>(); // faster + exception safe
std::cout << shptr.use_count() ; // 1 // gives the number of "
things " pointing to it.
T * temp = shptr.get(); // gives a pointer to object
// shared_pointer used like a regular pointer to call member functions
shptr->memFn();
(*shptr).memFn();
//
shptr.reset() ; // frees the object pointed to be the ptr
shptr = nullptr ; // frees the object
shptr = make_shared<T>() ; // frees the original object and points to new object
Implemented using reference counting to keep track of how many " things " point to the object pointed to by the pointer. When this count goes to 0 , the object is automatically deleted , ie objected is deleted when all the share_ptr pointing to the object goes out of scope.
This gets rid of the headache of having to delete objects which you have allocated using new.
Weak Pointer :
Helps deal with cyclic reference which arises when using Shared Pointer
If you have two objects pointed to by two shared pointers and there is an internal shared pointer pointing to each others shared pointer then there will be a cyclic reference and the object will not be deleted when shared pointers go out of scope. To solve this , change the internal member from a shared_ptr to weak_ptr. Note : To access the element pointed to by a weak pointer use lock() , this returns a weak_ptr.
T a ;
shared_ptr<T> shr = make_shared<T>() ;
weak_ptr<T> wk = shr ; // initialize a weak_ptr from a shared_ptr
wk.lock()->memFn() ; // use lock to get a shared_ptr
// ^^^ Can lead to exception if the shared ptr has gone out of scope
if(!wk.expired()) wk.lock()->memFn() ;
// Check if shared ptr has gone out of scope before access
See : When is std::weak_ptr useful?
Unique Pointer :
Light weight smart pointer with exclusive ownership. Use when pointer points to unique objects without sharing the objects between the pointers.
unique_ptr<T> uptr(new T);
uptr->memFn();
//T * ptr = uptr.release(); // uptr becomes null and object is pointed to by ptr
uptr.reset() ; // deletes the object pointed to by uptr
To change the object pointed to by the unique ptr , use move semantics
unique_ptr<T> uptr1(new T);
unique_ptr<T> uptr2(new T);
uptr2 = std::move(uptr1);
// object pointed by uptr2 is deleted and
// object pointed by uptr1 is pointed to by uptr2
// uptr1 becomes null
References :
They can essentially be though of as const pointers, ie a pointer which is const and cannot be moved with better syntax.
See : What are the differences between a pointer variable and a reference variable in C++?
r-value reference : reference to a temporary object
l-value reference : reference to an object whose address can be obtained
const reference : reference to a data type which is const and cannot be modified
Reference :
https://www.youtube.com/channel/UCEOGtxYTB6vo6MQ-WQ9W_nQ
Thanks to Andre for pointing out this question.
http://en.wikipedia.org/wiki/Smart_pointer
In computer science, a smart pointer
is an abstract data type that
simulates a pointer while providing
additional features, such as automatic
garbage collection or bounds checking.
These additional features are intended
to reduce bugs caused by the misuse of
pointers while retaining efficiency.
Smart pointers typically keep track of
the objects that point to them for the
purpose of memory management. The
misuse of pointers is a major source
of bugs: the constant allocation,
deallocation and referencing that must
be performed by a program written
using pointers makes it very likely
that some memory leaks will occur.
Smart pointers try to prevent memory
leaks by making the resource
deallocation automatic: when the
pointer to an object (or the last in a
series of pointers) is destroyed, for
example because it goes out of scope,
the pointed object is destroyed too.
A smart pointer is a class, a wrapper of a normal pointer. Unlike normal pointers, smart point’s life circle is based on a reference count (how many time the smart pointer object is assigned). So whenever a smart pointer is assigned to another one, the internal reference count plus plus. And whenever the object goes out of scope, the reference count minus minus.
Automatic pointer, though looks similar, is totally different from smart pointer. It is a convenient class that deallocates the resource whenever an automatic pointer object goes out of variable scope. To some extent, it makes a pointer (to dynamically allocated memory) works similar to a stack variable (statically allocated in compiling time).
What is a smart pointer.
Long version, In principle:
https://web.stanford.edu/class/archive/cs/cs106l/cs106l.1192/lectures/lecture15/15_RAII.pdf
A modern C++ idiom:
RAII: Resource Acquisition Is Initialization.
● When you initialize an object, it should already have
acquired any resources it needs (in the constructor).
● When an object goes out of scope, it should release every
resource it is using (using the destructor).
key point:
● There should never be a half-ready or half-dead object.
● When an object is created, it should be in a ready state.
● When an object goes out of scope, it should release its resources.
● The user shouldn’t have to do anything more.
Raw Pointers violate RAII: It need user to delete manually when the pointers go out of scope.
RAII solution is:
Have a smart pointer class:
● Allocates the memory when initialized
● Frees the memory when destructor is called
● Allows access to underlying pointer
For smart pointer need copy and share, use shared_ptr:
● use another memory to store Reference counting and shared.
● increment when copy, decrement when destructor.
● delete memory when Reference counting is 0.
also delete memory that store Reference counting.
for smart pointer not own the raw pointer, use weak_ptr:
● not change Reference counting.
shared_ptr usage:
correct way:
std::shared_ptr<T> t1 = std::make_shared<T>(TArgs);
std::shared_ptr<T> t2 = std::shared_ptr<T>(new T(Targs));
wrong way:
T* pt = new T(TArgs); // never exposure the raw pointer
shared_ptr<T> t1 = shared_ptr<T>(pt);
shared_ptr<T> t2 = shared_ptr<T>(pt);
Always avoid using raw pointer.
For scenario that have to use raw pointer:
https://stackoverflow.com/a/19432062/2482283
For raw pointer that not nullptr, use reference instead.
not use T*
use T&
For optional reference which maybe nullptr, use raw pointer, and which means:
T* pt; is optional reference and maybe nullptr.
Not own the raw pointer,
Raw pointer is managed by some one else.
I only know that the caller is sure it is not released now.
Smart Pointers are those where you don't have to worry about Memory De-Allocation, Resource Sharing and Transfer.
You can very well use these pointer in the similar way as any allocation works in Java. In java Garbage Collector does the trick, while in Smart Pointers, the trick is done by Destructors.
The existing answers are good but don't cover what to do when a smart pointer is not the (complete) answer to the problem you are trying to solve.
Among other things (explained well in other answers) using a smart pointer is a possible solution to How do we use a abstract class as a function return type? which has been marked as a duplicate of this question. However, the first question to ask if tempted to specify an abstract (or in fact, any) base class as a return type in C++ is "what do you really mean?". There is a good discussion (with further references) of idiomatic object oriented programming in C++ (and how this is different to other languages) in the documentation of the boost pointer container library. In summary, in C++ you have to think about ownership. Which smart pointers help you with, but are not the only solution, or always a complete solution (they don't give you polymorphic copy) and are not always a solution you want to expose in your interface (and a function return sounds an awful lot like an interface). It might be sufficient to return a reference, for example. But in all of these cases (smart pointer, pointer container or simply returning a reference) you have changed the return from a value to some form of reference. If you really needed copy you may need to add more boilerplate "idiom" or move beyond idiomatic (or otherwise) OOP in C++ to more generic polymorphism using libraries like Adobe Poly or Boost.TypeErasure.
There are two concepts (ownership, lifetime) that are important when using C++ smart pointers (unique, shared, weak). I try to understand those concepts and how they influence smart pointer (or raw pointer) usage.
I read two rules:
Always use smart pointers to manage ownership/lifetime of dynamic
objects.
Don't use smart pointers when not managing ownership/lifetime.
An example:
class Object
{
public:
Object* child(int i) { return mChildren[i]; }
// More search and access functions returning pointers here
private:
vector<Object*> mChildren;
};
I want to rewrite this using smart pointers. Lets ignore child() first. Easy game. A parent owns its children. So make mChildren a vector of unique_ptr.
According to the above rules, some people argue child(i) should continue returning a raw pointer.
But isn't this risky? Someone could do stupid things like deleting the returned object getting a hard to debug crash... which could be avoided using a weak_ptr or a shared_ptr as a return value.
Can't one say that copying a pointer always means to temporarily share the ownership and/or to assert the lifetime of the object?
Is it worth using smart pointers for children only if I do not get a safer API as well?
You could return a const std::unique_ptr<Object>& which would allow you to have same semantics of a raw pointer to call methods on it while preventing deletion.
Using std::unique_ptr with raw pointer makes sense when you know that the ownership will survive any raw pointer and you are sure that people won't try to delete the pointer directly. So that's different from using a std::weak_ptr and std::shared_ptr because they won't allow you to use dangling pointers at all.
There's always room to make something wrong, so the answer really depends on the specific situation, where this code is going to be used and such.
What is a smart pointer and when should I use one?
UPDATE
This answer is rather old, and so describes what was 'good' at the time, which was smart pointers provided by the Boost library. Since C++11, the standard library has provided sufficient smart pointers types, and so you should favour the use of std::unique_ptr, std::shared_ptr and std::weak_ptr.
There was also std::auto_ptr. It was very much like a scoped pointer, except that it also had the "special" dangerous ability to be copied — which also unexpectedly transfers ownership.
It was deprecated in C++11 and removed in C++17, so you shouldn't use it.
std::auto_ptr<MyObject> p1 (new MyObject());
std::auto_ptr<MyObject> p2 = p1; // Copy and transfer ownership.
// p1 gets set to empty!
p2->DoSomething(); // Works.
p1->DoSomething(); // Oh oh. Hopefully raises some NULL pointer exception.
OLD ANSWER
A smart pointer is a class that wraps a 'raw' (or 'bare') C++ pointer, to manage the lifetime of the object being pointed to. There is no single smart pointer type, but all of them try to abstract a raw pointer in a practical way.
Smart pointers should be preferred over raw pointers. If you feel you need to use pointers (first consider if you really do), you would normally want to use a smart pointer as this can alleviate many of the problems with raw pointers, mainly forgetting to delete the object and leaking memory.
With raw pointers, the programmer has to explicitly destroy the object when it is no longer useful.
// Need to create the object to achieve some goal
MyObject* ptr = new MyObject();
ptr->DoSomething(); // Use the object in some way
delete ptr; // Destroy the object. Done with it.
// Wait, what if DoSomething() raises an exception...?
A smart pointer by comparison defines a policy as to when the object is destroyed. You still have to create the object, but you no longer have to worry about destroying it.
SomeSmartPtr<MyObject> ptr(new MyObject());
ptr->DoSomething(); // Use the object in some way.
// Destruction of the object happens, depending
// on the policy the smart pointer class uses.
// Destruction would happen even if DoSomething()
// raises an exception
The simplest policy in use involves the scope of the smart pointer wrapper object, such as implemented by boost::scoped_ptr or std::unique_ptr.
void f()
{
{
std::unique_ptr<MyObject> ptr(new MyObject());
ptr->DoSomethingUseful();
} // ptr goes out of scope --
// the MyObject is automatically destroyed.
// ptr->Oops(); // Compile error: "ptr" not defined
// since it is no longer in scope.
}
Note that std::unique_ptr instances cannot be copied. This prevents the pointer from being deleted multiple times (incorrectly). You can, however, pass references to it around to other functions you call.
std::unique_ptrs are useful when you want to tie the lifetime of the object to a particular block of code, or if you embedded it as member data inside another object, the lifetime of that other object. The object exists until the containing block of code is exited, or until the containing object is itself destroyed.
A more complex smart pointer policy involves reference counting the pointer. This does allow the pointer to be copied. When the last "reference" to the object is destroyed, the object is deleted. This policy is implemented by boost::shared_ptr and std::shared_ptr.
void f()
{
typedef std::shared_ptr<MyObject> MyObjectPtr; // nice short alias
MyObjectPtr p1; // Empty
{
MyObjectPtr p2(new MyObject());
// There is now one "reference" to the created object
p1 = p2; // Copy the pointer.
// There are now two references to the object.
} // p2 is destroyed, leaving one reference to the object.
} // p1 is destroyed, leaving a reference count of zero.
// The object is deleted.
Reference counted pointers are very useful when the lifetime of your object is much more complicated, and is not tied directly to a particular section of code or to another object.
There is one drawback to reference counted pointers — the possibility of creating a dangling reference:
// Create the smart pointer on the heap
MyObjectPtr* pp = new MyObjectPtr(new MyObject())
// Hmm, we forgot to destroy the smart pointer,
// because of that, the object is never destroyed!
Another possibility is creating circular references:
struct Owner {
std::shared_ptr<Owner> other;
};
std::shared_ptr<Owner> p1 (new Owner());
std::shared_ptr<Owner> p2 (new Owner());
p1->other = p2; // p1 references p2
p2->other = p1; // p2 references p1
// Oops, the reference count of of p1 and p2 never goes to zero!
// The objects are never destroyed!
To work around this problem, both Boost and C++11 have defined a weak_ptr to define a weak (uncounted) reference to a shared_ptr.
Here's a simple answer for these days of modern C++ (C++11 and later):
"What is a smart pointer?"
It's a type whose values can be used like pointers, but which provides the additional feature of automatic memory management: When a smart pointer is no longer in use, the memory it points to is deallocated (see also the more detailed definition on Wikipedia).
"When should I use one?"
In code which involves tracking the ownership of a piece of memory, allocating or de-allocating; the smart pointer often saves you the need to do these things explicitly.
"But which smart pointer should I use in which of those cases?"
Use std::unique_ptr when you want your object to live just as long as a single owning reference to it lives. For example, use it for a pointer to memory which gets allocated on entering some scope and de-allocated on exiting the scope.
Use std::shared_ptr when you do want to refer to your object from multiple places - and do not want your object to be de-allocated until all these references are themselves gone.
Use std::weak_ptr when you do want to refer to your object from multiple places - for those references for which it's ok to ignore and deallocate (so they'll just note the object is gone when you try to dereference).
There is a proposal to add hazard pointers to C++26, but for now you don't have them.
Don't use the boost:: smart pointers or std::auto_ptr except in special cases which you can read up on if you must.
"Hey, I didn't ask which one to use!"
Ah, but you really wanted to, admit it.
"So when should I use regular pointers then?"
Mostly in code that is oblivious to memory ownership. This would typically be in functions which get a pointer from someplace else and do not allocate nor de-allocate, and do not store a copy of the pointer which outlasts their execution.
UPDATE:
This answer is outdated concerning C++ types which were used in the past.
std::auto_ptr is deprecated and removed in new standards.
Instead of boost::shared_ptr the std::shared_ptr should be used which is part of the standard.
The links to the concepts behind the rationale of smart pointers still mostly relevant.
Modern C++ has the following smart pointer types and doesn't require boost smart pointers:
std::shared_ptr
std::weak_ptr
std::unique_ptr
There is also 2-nd edition of the book mentioned in the answer: C++ Templates: The Complete Guide 2nd Edition by David Vandevoorde Nicolai, M. Josuttis, Douglas Gregor
OLD ANSWER:
A smart pointer is a pointer-like type with some additional functionality, e.g. automatic memory deallocation, reference counting etc.
A small intro is available on the page Smart Pointers - What, Why, Which?.
One of the simple smart-pointer types is std::auto_ptr (chapter 20.4.5 of C++ standard), which allows one to deallocate memory automatically when it out of scope and which is more robust than simple pointer usage when exceptions are thrown, although less flexible.
Another convenient type is boost::shared_ptr which implements reference counting and automatically deallocates memory when no references to the object remains. This helps avoiding memory leaks and is easy to use to implement RAII.
The subject is covered in depth in book "C++ Templates: The Complete Guide" by David Vandevoorde, Nicolai M. Josuttis, chapter Chapter 20. Smart Pointers.
Some topics covered:
Protecting Against Exceptions
Holders, (note, std::auto_ptr is implementation of such type of smart pointer)
Resource Acquisition Is Initialization (This is frequently used for exception-safe resource management in C++)
Holder Limitations
Reference Counting
Concurrent Counter Access
Destruction and Deallocation
Definitions provided by Chris, Sergdev and Llyod are correct. I prefer a simpler definition though, just to keep my life simple:
A smart pointer is simply a class that overloads the -> and * operators. Which means that your object semantically looks like a pointer but you can make it do way cooler things, including reference counting, automatic destruction etc.
shared_ptr and auto_ptr are sufficient in most cases, but come along with their own set of small idiosyncrasies.
A smart pointer is like a regular (typed) pointer, like "char*", except when the pointer itself goes out of scope then what it points to is deleted as well. You can use it like you would a regular pointer, by using "->", but not if you need an actual pointer to the data. For that, you can use "&*ptr".
It is useful for:
Objects that must be allocated with new, but that you'd like to have the same lifetime as something on that stack. If the object is assigned to a smart pointer, then they will be deleted when the program exits that function/block.
Data members of classes, so that when the object is deleted all the owned data is deleted as well, without any special code in the destructor (you will need to be sure the destructor is virtual, which is almost always a good thing to do).
You may not want to use a smart pointer when:
... the pointer shouldn't actually own the data... i.e., when you are just using the data, but you want it to survive the function where you are referencing it.
... the smart pointer isn't itself going to be destroyed at some point. You don't want it to sit in memory that never gets destroyed (such as in an object that is dynamically allocated but won't be explicitly deleted).
... two smart pointers might point to the same data. (There are, however, even smarter pointers that will handle that... that is called reference counting.)
See also:
garbage collection.
This stack overflow question regarding data ownership
A smart pointer is an object that acts like a pointer, but additionally provides control on construction, destruction, copying, moving and dereferencing.
One can implement one's own smart pointer, but many libraries also provide smart pointer implementations each with different advantages and drawbacks.
For example, Boost provides the following smart pointer implementations:
shared_ptr<T> is a pointer to T using a reference count to determine when the object is no longer needed.
scoped_ptr<T> is a pointer automatically deleted when it goes out of scope. No assignment is possible.
intrusive_ptr<T> is another reference counting pointer. It provides better performance than shared_ptr, but requires the type T to provide its own reference counting mechanism.
weak_ptr<T> is a weak pointer, working in conjunction with shared_ptr to avoid circular references.
shared_array<T> is like shared_ptr, but for arrays of T.
scoped_array<T> is like scoped_ptr, but for arrays of T.
These are just one linear descriptions of each and can be used as per need, for further detail and examples one can look at the documentation of Boost.
Additionally, the C++ standard library provides three smart pointers; std::unique_ptr for unique ownership, std::shared_ptr for shared ownership and std::weak_ptr. std::auto_ptr existed in C++03 but is now deprecated.
Most kinds of smart pointers handle disposing of the pointer-to object for you. It's very handy because you don't have to think about disposing of objects manually anymore.
The most commonly-used smart pointers are std::tr1::shared_ptr (or boost::shared_ptr), and, less commonly, std::auto_ptr. I recommend regular use of shared_ptr.
shared_ptr is very versatile and deals with a large variety of disposal scenarios, including cases where objects need to be "passed across DLL boundaries" (the common nightmare case if different libcs are used between your code and the DLLs).
Here is the Link for similar answers : http://sickprogrammersarea.blogspot.in/2014/03/technical-interview-questions-on-c_6.html
A smart pointer is an object that acts, looks and feels like a normal pointer but offers more functionality. In C++, smart pointers are implemented as template classes that encapsulate a pointer and override standard pointer operators. They have a number of advantages over regular pointers. They are guaranteed to be initialized as either null pointers or pointers to a heap object. Indirection through a null pointer is checked. No delete is ever necessary. Objects are automatically freed when the last pointer to them has gone away. One significant problem with these smart pointers is that unlike regular pointers, they don't respect inheritance. Smart pointers are unattractive for polymorphic code. Given below is an example for the implementation of smart pointers.
Example:
template <class X>
class smart_pointer
{
public:
smart_pointer(); // makes a null pointer
smart_pointer(const X& x) // makes pointer to copy of x
X& operator *( );
const X& operator*( ) const;
X* operator->() const;
smart_pointer(const smart_pointer <X> &);
const smart_pointer <X> & operator =(const smart_pointer<X>&);
~smart_pointer();
private:
//...
};
This class implement a smart pointer to an object of type X. The object itself is located on the heap. Here is how to use it:
smart_pointer <employee> p= employee("Harris",1333);
Like other overloaded operators, p will behave like a regular pointer,
cout<<*p;
p->raise_salary(0.5);
Let T be a class in this tutorial
Pointers in C++ can be divided into 3 types :
1) Raw pointers :
T a;
T * _ptr = &a;
They hold a memory address to a location in memory. Use with caution , as programs become complex hard to keep track.
Pointers with const data or address { Read backwards }
T a ;
const T * ptr1 = &a ;
T const * ptr1 = &a ;
Pointer to a data type T which is a const. Meaning you cannot change the data type using the pointer. ie *ptr1 = 19 ; will not work. But you can move the pointer. ie ptr1++ , ptr1-- ; etc will work.
Read backwards : pointer to type T which is const
T * const ptr2 ;
A const pointer to a data type T . Meaning you cannot move the pointer but you can change the value pointed to by the pointer. ie *ptr2 = 19 will work but ptr2++ ; ptr2-- etc will not work. Read backwards : const pointer to a type T
const T * const ptr3 ;
A const pointer to a const data type T . Meaning you cannot either move the pointer nor can you change the data type pointer to be the pointer. ie . ptr3-- ; ptr3++ ; *ptr3 = 19; will not work
3) Smart Pointers : { #include <memory> }
Shared Pointer:
T a ;
//shared_ptr<T> shptr(new T) ; not recommended but works
shared_ptr<T> shptr = make_shared<T>(); // faster + exception safe
std::cout << shptr.use_count() ; // 1 // gives the number of "
things " pointing to it.
T * temp = shptr.get(); // gives a pointer to object
// shared_pointer used like a regular pointer to call member functions
shptr->memFn();
(*shptr).memFn();
//
shptr.reset() ; // frees the object pointed to be the ptr
shptr = nullptr ; // frees the object
shptr = make_shared<T>() ; // frees the original object and points to new object
Implemented using reference counting to keep track of how many " things " point to the object pointed to by the pointer. When this count goes to 0 , the object is automatically deleted , ie objected is deleted when all the share_ptr pointing to the object goes out of scope.
This gets rid of the headache of having to delete objects which you have allocated using new.
Weak Pointer :
Helps deal with cyclic reference which arises when using Shared Pointer
If you have two objects pointed to by two shared pointers and there is an internal shared pointer pointing to each others shared pointer then there will be a cyclic reference and the object will not be deleted when shared pointers go out of scope. To solve this , change the internal member from a shared_ptr to weak_ptr. Note : To access the element pointed to by a weak pointer use lock() , this returns a weak_ptr.
T a ;
shared_ptr<T> shr = make_shared<T>() ;
weak_ptr<T> wk = shr ; // initialize a weak_ptr from a shared_ptr
wk.lock()->memFn() ; // use lock to get a shared_ptr
// ^^^ Can lead to exception if the shared ptr has gone out of scope
if(!wk.expired()) wk.lock()->memFn() ;
// Check if shared ptr has gone out of scope before access
See : When is std::weak_ptr useful?
Unique Pointer :
Light weight smart pointer with exclusive ownership. Use when pointer points to unique objects without sharing the objects between the pointers.
unique_ptr<T> uptr(new T);
uptr->memFn();
//T * ptr = uptr.release(); // uptr becomes null and object is pointed to by ptr
uptr.reset() ; // deletes the object pointed to by uptr
To change the object pointed to by the unique ptr , use move semantics
unique_ptr<T> uptr1(new T);
unique_ptr<T> uptr2(new T);
uptr2 = std::move(uptr1);
// object pointed by uptr2 is deleted and
// object pointed by uptr1 is pointed to by uptr2
// uptr1 becomes null
References :
They can essentially be though of as const pointers, ie a pointer which is const and cannot be moved with better syntax.
See : What are the differences between a pointer variable and a reference variable in C++?
r-value reference : reference to a temporary object
l-value reference : reference to an object whose address can be obtained
const reference : reference to a data type which is const and cannot be modified
Reference :
https://www.youtube.com/channel/UCEOGtxYTB6vo6MQ-WQ9W_nQ
Thanks to Andre for pointing out this question.
http://en.wikipedia.org/wiki/Smart_pointer
In computer science, a smart pointer
is an abstract data type that
simulates a pointer while providing
additional features, such as automatic
garbage collection or bounds checking.
These additional features are intended
to reduce bugs caused by the misuse of
pointers while retaining efficiency.
Smart pointers typically keep track of
the objects that point to them for the
purpose of memory management. The
misuse of pointers is a major source
of bugs: the constant allocation,
deallocation and referencing that must
be performed by a program written
using pointers makes it very likely
that some memory leaks will occur.
Smart pointers try to prevent memory
leaks by making the resource
deallocation automatic: when the
pointer to an object (or the last in a
series of pointers) is destroyed, for
example because it goes out of scope,
the pointed object is destroyed too.
A smart pointer is a class, a wrapper of a normal pointer. Unlike normal pointers, smart point’s life circle is based on a reference count (how many time the smart pointer object is assigned). So whenever a smart pointer is assigned to another one, the internal reference count plus plus. And whenever the object goes out of scope, the reference count minus minus.
Automatic pointer, though looks similar, is totally different from smart pointer. It is a convenient class that deallocates the resource whenever an automatic pointer object goes out of variable scope. To some extent, it makes a pointer (to dynamically allocated memory) works similar to a stack variable (statically allocated in compiling time).
What is a smart pointer.
Long version, In principle:
https://web.stanford.edu/class/archive/cs/cs106l/cs106l.1192/lectures/lecture15/15_RAII.pdf
A modern C++ idiom:
RAII: Resource Acquisition Is Initialization.
● When you initialize an object, it should already have
acquired any resources it needs (in the constructor).
● When an object goes out of scope, it should release every
resource it is using (using the destructor).
key point:
● There should never be a half-ready or half-dead object.
● When an object is created, it should be in a ready state.
● When an object goes out of scope, it should release its resources.
● The user shouldn’t have to do anything more.
Raw Pointers violate RAII: It need user to delete manually when the pointers go out of scope.
RAII solution is:
Have a smart pointer class:
● Allocates the memory when initialized
● Frees the memory when destructor is called
● Allows access to underlying pointer
For smart pointer need copy and share, use shared_ptr:
● use another memory to store Reference counting and shared.
● increment when copy, decrement when destructor.
● delete memory when Reference counting is 0.
also delete memory that store Reference counting.
for smart pointer not own the raw pointer, use weak_ptr:
● not change Reference counting.
shared_ptr usage:
correct way:
std::shared_ptr<T> t1 = std::make_shared<T>(TArgs);
std::shared_ptr<T> t2 = std::shared_ptr<T>(new T(Targs));
wrong way:
T* pt = new T(TArgs); // never exposure the raw pointer
shared_ptr<T> t1 = shared_ptr<T>(pt);
shared_ptr<T> t2 = shared_ptr<T>(pt);
Always avoid using raw pointer.
For scenario that have to use raw pointer:
https://stackoverflow.com/a/19432062/2482283
For raw pointer that not nullptr, use reference instead.
not use T*
use T&
For optional reference which maybe nullptr, use raw pointer, and which means:
T* pt; is optional reference and maybe nullptr.
Not own the raw pointer,
Raw pointer is managed by some one else.
I only know that the caller is sure it is not released now.
Smart Pointers are those where you don't have to worry about Memory De-Allocation, Resource Sharing and Transfer.
You can very well use these pointer in the similar way as any allocation works in Java. In java Garbage Collector does the trick, while in Smart Pointers, the trick is done by Destructors.
The existing answers are good but don't cover what to do when a smart pointer is not the (complete) answer to the problem you are trying to solve.
Among other things (explained well in other answers) using a smart pointer is a possible solution to How do we use a abstract class as a function return type? which has been marked as a duplicate of this question. However, the first question to ask if tempted to specify an abstract (or in fact, any) base class as a return type in C++ is "what do you really mean?". There is a good discussion (with further references) of idiomatic object oriented programming in C++ (and how this is different to other languages) in the documentation of the boost pointer container library. In summary, in C++ you have to think about ownership. Which smart pointers help you with, but are not the only solution, or always a complete solution (they don't give you polymorphic copy) and are not always a solution you want to expose in your interface (and a function return sounds an awful lot like an interface). It might be sufficient to return a reference, for example. But in all of these cases (smart pointer, pointer container or simply returning a reference) you have changed the return from a value to some form of reference. If you really needed copy you may need to add more boilerplate "idiom" or move beyond idiomatic (or otherwise) OOP in C++ to more generic polymorphism using libraries like Adobe Poly or Boost.TypeErasure.
Based on this
Stroustrup suggests that "A pointer in a function should not represent ownership"
Question> Can someone give me a little detail explanation? Best if an example is illustrated.
Thank you
A pointer is "owned" by some code if that code is responsible for deleting it, or for transferring ownership to someone else. Various smart pointers implement explicit ownership models. shared_ptr represents multiple pieces of code owning a pointer. unique_ptr represents only one piece of code that owns the pointer.
What he's saying is that if a function has a naked pointer (a pointer not in a smart pointer), it should not be considered to own it. If it is to claim some ownership of this pointer, it should either have been given a smart pointer as a parameter, or it should have stored the pointer it created with new in a smart pointer.
He's saying that only smart pointers own pointers. If a function takes a naked pointer as a parameter, it does not claim ownership of that pointer. If a function returns a naked pointer, you cannot claim ownership of that pointer.
std::unique_ptr<int> pOwner(new int(5)); // this is the owner
int* pAccess = pOwner.get(); // this is a weak accessor, it does not own anything
He's talking about the role of raw pointers in a C++11 world. Owning pointers are meant to be shared_ptr and unique_ptr (they are the owners because they are responsible for deleting the object). Raw pointers should be used to access objects which are owned by a smart pointer. In C++11 you should basically never have a reason to explicitly call delete on a raw pointer anymore.
When you create a dynamic object using new, some other object will be responsible for deleting it once it is no longer needed; that object is the dynamic object's "owner".
If you were to always refer to the object using plain pointers, then it's difficult to tell (without documentation) which of those pointers pointers represents ownership. If you pass a pointer to a function, then does the function take ownership? Or is the caller still responsible for deleting it? If you get that wrong, then you'll either not delete it (causing a resource leak, which might degrade your program's performance and eventually stop it from working), or you might delete it too soon (which can cause all manner of bugs, often very hard to track down).
A widely-used solution for this is to have a policy of always using smart pointers (objects that look like pointers, but contain logic to manage their target's lifetime) to denote ownership, and to never delete anything to which you just have a plain pointer. Then there is never any confusion about whether or not to delete something. The standard library provides smart pointers (unique_ptr and shared_ptr) that give the common semantics of ownership by a single object, and ownership shared between multiple objects.
This is one aspect of the wider topic of resource management via RAII, which is extremely important in C++. As well as providing a clear ownership model, it is also the only sensible way to reliably prevent memory leaks when exceptions are thrown.
This question already has answers here:
Closed 11 years ago.
Possible Duplicates:
pimpl: shared_ptr or unique_ptr
smart pointers (boost) explained
Could someone explain differences between shared_ptr and unique_ptr?
Both of these classes are smart pointers, which means that they automatically (in most cases) will deallocate the object that they point at when that object can no longer be referenced. The difference between the two is how many different pointers of each type can refer to a resource.
When using unique_ptr, there can be at most one unique_ptr pointing at any one resource. When that unique_ptr is destroyed, the resource is automatically reclaimed. Because there can only be one unique_ptr to any resource, any attempt to make a copy of a unique_ptr will cause a compile-time error. For example, this code is illegal:
unique_ptr<T> myPtr(new T); // Okay
unique_ptr<T> myOtherPtr = myPtr; // Error: Can't copy unique_ptr
However, unique_ptr can be moved using the new move semantics:
unique_ptr<T> myPtr(new T); // Okay
unique_ptr<T> myOtherPtr = std::move(myPtr); // Okay, resource now stored in myOtherPtr
Similarly, you can do something like this:
unique_ptr<T> MyFunction() {
unique_ptr<T> myPtr(/* ... */);
/* ... */
return myPtr;
}
This idiom means "I'm returning a managed resource to you. If you don't explicitly capture the return value, then the resource will be cleaned up. If you do, then you now have exclusive ownership of that resource." In this way, you can think of unique_ptr as a safer, better replacement for auto_ptr.
shared_ptr, on the other hand, allows for multiple pointers to point at a given resource. When the very last shared_ptr to a resource is destroyed, the resource will be deallocated. For example, this code is perfectly legal:
shared_ptr<T> myPtr(new T); // Okay
shared_ptr<T> myOtherPtr = myPtr; // Sure! Now have two pointers to the resource.
Internally, shared_ptr uses reference counting to track how many pointers refer to a resource, so you need to be careful not to introduce any reference cycles.
In short:
Use unique_ptr when you want a single pointer to an object that will be reclaimed when that single pointer is destroyed.
Use shared_ptr when you want multiple pointers to the same resource.
unique_ptr is the light-weight smart pointer of choice if you just have a dynamic object somewhere for which one consumer has sole (hence "unique") responsibility -- maybe a wrapper class that needs to maintain some dynamically allocated object. unique_ptr has very little overhead. It is not copyable, but movable. Its type is template <typename D, typename Deleter> class unique_ptr;, so it depends on two template parameters.
unique_ptr is also what auto_ptr wanted to be in the old C++ but couldn't because of that language's limitations.
shared_ptr on the other hand is a very different animal. The obvious difference is that you can have many consumers sharing responsibility for a dynamic object (hence "shared"), and the object will only be destroyed when all shared pointers have gone away. Additionally you can have observing weak pointers which will intelligently be informed if the shared pointer they're following has disappeared.
Internally, shared_ptr has a lot more going on: There is a reference count, which is updated atomically to allow the use in concurrent code. Also, there's plenty of allocation going on, one for an internal bookkeeping "reference control block", and another (often) for the actual member object.
But there's another big difference: The shared pointers type is always template <typename T> class shared_ptr;, and this is despite the fact that you can initialize it with custom deleters and with custom allocators. The deleter and allocator are tracked using type erasure and virtual function dispatch, which adds to the internal weight of the class, but has the enormous advantage that different sorts of shared pointers of type T are all compatible, no matter the deletion and allocation details. Thus they truly express the concept of "shared responsibility for T" without burdening the consumer with the details!
Both shared_ptr and unique_ptr are designed to be passed by value (with the obvious movability requirement for the unique pointer). Neither should make you worried about the overhead, since their power is truly astounding, but if you have a choice, prefer unique_ptr, and only use shared_ptr if you really need shared responsibility.
unique_ptr
is a smart pointer which owns an object exclusively.
shared_ptr
is a smart pointer for shared ownership. It is both copyable and movable. Multiple smart pointer instances can own the same resource. As soon as the last smart pointer owning the resource goes out of scope, the resource will be freed.
When wrapping a pointer in a unique_ptr you cannot have multiple copies of unique_ptr. The shared_ptr holds a reference counter which count the number of copies of the stored pointer. Each time a shared_ptr is copied, this counter is incremented. Each time a shared_ptr is destructed, this counter is decremented. When this counter reaches 0, then the stored object is destroyed.