I am loading up nana source in CLion and cmake gives me the an error saying x11 is set to NOTFOUND
I have tried installing x11 dev libs on ubuntu but it has not helped :/
EDIT: I have fixed the issue above by installing (2nd Code block)
sudo apt install libxft-dev
however now I am seeing the following error (1st Code Block)
CODE BLOCK 1
fatal error: X11/Xcursor/Xcursor.h: No such file or directory
#include <X11/Xcursor/Xcursor.h>
^~~~~~~~~~~~~~~~~~~~~~~
CODE BLCOK 2
CMake Error: The following variables are used in this project, but they are set to NOTFOUND.
Please set them or make sure they are set and tested correctly in the CMake files:
/home/jirubizu/Downloads/nana_hotfix/X11_Xft_INCLUDE_PATH
used as include directory in directory /home/jirubizu/Downloads/nana_hotfix
X11_Xft_LIB (ADVANCED)
linked by target "nana" in directory /home/jirubizu/Downloads/nana_hotfix
expected to compile but for some reason its not
Try it before the load:
sudo apt install libxcursor-dev
here are many X11 packages. libxft-dev seems an odd choice. It os a small part of X11 and may or may not bring in X11 libraries you need. Perhaps try installing libxcursor-dev and see what happens.
from n. 'pronouns' m
It works for me
apt-get install libxcursor-dev libxrandr-dev libxinerama-dev libxi-dev
That should do it!
Related
I'm using MinGW64 via an MSYS2 download and am currently trying to install the Solar Geometry 2 library (http://www.oie.mines-paristech.fr/Valorisation/Outils/Solar-Geometry/) for use. I'm following their install README, which states to navigate to the directory and "configure" (I've been typing "./configure". However, when I do so, I get the following message in my terminal:
$ ./configure
configure: loading site script /mingw64/etc/config.site
/mingw64/etc/config.site: line 13: config.site:13: default build_alias set to x6_64-w64-mingw32: command not found
/mingw64/etc/config.site: line 20: config.site:20: default prefix set to /mingw4: No such file or directory
configure: error: cannot find install-sh or install.sh in . ./.. ./../..
When I initially installed MSYS2 I set up the etc/fstab file as recommended. However, I'm quite new to MSYS so I'm assuming I botched something in my setup. I haven't edited anything in the config.site file mentioned in the errors, so I'm wondering if it's something in there.
Any help is greatly appreciated, thank you
No where in the directions for "Solar Geometry" do I see reference to MSys or MSys2.
I suggest you install the compiler toolchain and base development file. No idea if you editing /etc/fstab will cause problems. I do not normmaly edit it!
Install MinGW Package build packages. You might need more packages installed.
pacman -S --needed base-devel mingw-w64-x86_64-toolchain
I want to be able to make and run this particular library on my computer. Currently going through the INSTALL file. I am currently at the point:
After extracting the Poco (Complete Edition) source archive, the configure
script should be called with the following parameters:
./configure --omit=Crypto,Net,NetSSL_OpenSSL,Data/ODBC,Data/MySQL \
--no-tests --no-samples
This line avoids building the parts of Poco which are dependent on third-party
libraries, and are not required for openBliSSART.
You can also specify a prefix where Poco should be installed, but in most cases
you should leave the default /usr/local.
I can't seem to run the options, so I simply ran ./configure, this seemed to have worked till the point where I encountered:
checking for fftw_plan_dft_r2c_1d in -lfftw3... yes
checking for Poco (Enterprise)... no
configure: error: Need Poco Enterprise v1.3.6+!
But the fact is, that I have installed Poco already on the system through a brew install poco and downloaded the library from their source website and compiled it ground up. looking back at INSTALL:
Depending on where you have installed Poco, you may have to set the
LD_LIBRARY_PATH environment variable to contain the Poco "lib" directory,
or run the ldconfig tool. The following lines work with Ubuntu and openSUSE
($ indicates the shell prompt):
$ sudo sh -c 'echo <prefix>/lib > /etc/ld.so.conf.d/poco.conf'
$ sudo ldconfig
where <prefix> is the Poco install prefix (by default /usr/local).
Now when I do a simple sudo find / -name poco, I get:
/usr/local/var/homebrew/linked/poco
/usr/local/opt/poco
/usr/local/Cellar/poco
find: /private/var/db/ConfigurationProfiles/Store: Operation not permitted
find: /private/var/folders/pq/xchc5hxj02d754txf8nml5f00000gn/0/SafariFamily: Operation not permitted
find: /private/var/folders/pq/xchc5hxj02d754txf8nml5f00000gn/0/com.apple.LaunchServices.dv: Operation not permitted
find: /private/var/folders/pq/xchc5hxj02d754txf8nml5f00000gn/0/com.apple.nsurlsessiond: Operation not permitted
find: /private/var/folders/pq/xchc5hxj02d754txf8nml5f00000gn/0/com.apple.routined: Operation not permitted
find: /private/var/folders/zz/zyxvpxvq6csfxvn_n00000y800007k/0/com.apple.nsurlsessiond: Operation not permitted
find: /private/var/folders/zz/zyxvpxvq6csfxvn_n00000s4000069/0/com.apple.nsurlsessiond: Operation not permitted
find: /private/var/folders/zz/zyxvpxvq6csfxvn_n00000s4000069/0/com.apple.routined: Operation not permitted
/Users/sharanduggirala/Library/Logs/Homebrew/poco
/Users/sharanduggirala/Documents/of_v0.9.8_osx_release/libs/poco
/Users/sharanduggirala/Documents/of_v0.9.8_osx_release/scripts/apothecary/formulas/poco
find: /dev/fd/3: Not a directory
find: /dev/fd/4: Not a directory
Also, it looks like while building poco, I did a ./configure --static. Would this have affected my compilation? How do I link this library?
I have already used the command ./configure --with-poco-prefix=/usr/local/opt/poco which doesn't really change anything.
Notes relating to S.M.'s Answer
I tried this, but got the error:
brew install poco --with-static ⏎
==> Downloading https://pocoproject.org/releases/poco-1.9.0/poco-1.9.0-all.tar.gz
######################################################################## 100.0%
Error: SHA256 mismatch
Expected: 028de410fc78d5f9b1ff400e93ec3d59b9e55a0cbbf0d8fec04636882b72ea45
Actual: 0387bf0f9d313e2311742e1ad0b64e07f2f3e76039eed20e3b9aa9951b88e187
Archive: /Users/sharanduggirala/Library/Caches/Homebrew/poco-1.9.0.tar.gz
To retry an incomplete download, remove the file above.
I also tried:
./configure --static ⏎
configure: error: unrecognized option: `--static'
Try `./configure --help' for more information
Do not install poco from sources. Use brew install poco. If you want the same like ./configure --static use brew install poco --with-static.
I have an issue with Codelite compilation, running on raspbian jessie - these are the (known) steps I have taken to produce it.
First I installed Codelite with apt-get install Codelite, then produced a c++ project.
When running build project I get the error:
/bin/sh -c ' -j 4 -e -f Makefile'
/bin/sh: 1: -j: not found
0 errors, 0 warnings
I note that this error has been found and corrected previously, through running a different version of Codelite from 6.1.1 (that which apt-get installs). I therefore found the updated version of armhf .deb codelite from the rasbian archive with gdebi-gtk. However the updated version (9.1.1) produces the following error (install attempt with the graphical debian):
Error: Dependency is not satisfiable: libclang 1-3.8 (>=3.2)
I do not understand why the package manager cannot update these packages - do they not exist for the pi? I ran the manager as root, so I do not think it is a permissions issue.
EDIT 1:
Thank you for that Fabre. My Enviromental Variables file now looks like this:
CodeLiteDir=/usr/share/codelite
export MAKE=make
I still get the same error however.
Okay so i'm trying to install Homebrew, so that I can I can install nodejs and npm. However I'm using this command from brew.sh;
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
Once I install Homebrew It keeps returning this error
It appears Homebrew is already installed. If your intent is to reinstall you
should do the following before running this installer again:
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/uninstall)"
The current contents of /usr/local are bin CODEOFCONDUCT.md etc lib libexec Library LICENSE.txt README.md sbin share .git .github .gitignore
omz_urlencode:42: failed to load module `zsh/regex': dlopen(/usr/local/Cellar/zsh/5.2/lib/zsh/regex.so, 9): image not found
omz_urlencode:42: -regex-match not available for regex'
I honestly have no idea what's happening here. I'm not sure If I have to symlink Homebrew up or what. But I have tried everything I know so far (which isn't much). If anyone could be kind enough to give me instructions as what too look for to solve the issue, I'm all ears.
Thank you for listening!
It seems it's a bug that have been corrected in recent version of OMZ, you should update it.
You get the output:
zsh: command not found: homebrew
Because homebrew is not a command. Try brew -v instead.
To resolve:
Warning: node-5.10.1 already installed, it's just not linked
Use brew link node
Okay so I think I have made some progress, It may have been for some weird reason I didn't have permission writes to run the 'brew link < package > ' so i ran the following command:
'sudo chown -R /usr/local/share/systemtap/tapset && brew doctor'
Once I ran 'brew link node' it successfully created 7 symlinks for the node directory on the following path;
'Linking /usr/local/Cellar/node/5.10.1... 7 symlinks created'
However, when I installed live-server via npm; I typed 'live-server -v' and it again returned 'zsh: command not found: live-server'. In addition to this it keeps telling me I have 'unbrewed dylibs':
Warning: Unbrewed dylibs were found in /usr/local/lib.
If you didn't put them there on purpose they could cause problems when
building Homebrew formulae, and may need to be deleted.
Unexpected dylibs:
/usr/local/lib/libociei.dylib
So im still unsure what the exact issue is.
P.S. Apologies for not posting this correctly, as im trying to see where I can seperate it into commands like you corrected in the first post, if you could link me to a post where it tells me how to use it properly i'll be more than happy to read it.
Thanks,
I'm trying to install CGAL-binding for Python on Ubuntu 14.
I installed CGAL as at the example in "INSTALL.md" file of CGAL github repository named "how to build the library in Release". As the next step I tried to install CGAL-binding as Full example https://github.com/CGAL/cgal-swig-bindings/wiki/Installation. But
> cmake -DCGAL_DIR=/usr/local/CGAL -DBUILD_JAVA=OFF -DPYTHON_OUTDIR_PREFIX=../../examples/python ../..
> make -j 4
causes errors from the log.
I didn't change anything in src files, but these errors point to them. How can I fix it?