Basically, I'm following a simple tutorial about files handling in C++.
I've been trying to create and write into a txt file at the same time, but any of the methods I've tried won't actually create a txt file in my executable location.
I should also say that, I print myfile.is_open() just to know if the file truly created and opened, but I get 0 everytime with every method.
What am I doing wrong ?
I mainly tried to create and write to a txt file like this:
#include <iostream>
#include <fstream>
using namespace std;
int main()
{
fstream myfile;
myfile.open("example.txt", ios::out);
cout << myfile.is_open() << endl;
myfile << "Writing this to a file.\n";
myfile.close();
}
First, I bet you're using an IDE like Visual Studio. Most IDEs set your working directory somewhere other than your project directory. I don't use Visual Studio, but many of them put them in ../.
So your file is being produced, but not where you think you should find it.
If you compile and run this program without an IDE, you'll get your file where you expect it.
You may also be able to tell your IDE that the working directory should be your project directory.
Now, to keep you from making a few bad habits, I'm going to tell you two more things.
It's considered a mistake to do using namespace std. Instead, I do using statements only on those things I am going to use frequently. In your short code, I wouldn't have done any.
Next, if you're going to write out a file, it's better to use std::ofstream. It's otherwise the same code. But it's a bit clearer that you're only using the file for output.
So my version of your code:
#include <iostream>
#include <fstream>
int main()
{
std::ofstream myfile;
myfile.open("example.txt");
std::cout << myfile.is_open() << std::endl;
myfile << "Writing this to a file.\n";
myfile.close();
}
Yeah, those std:: everywhere can be annoying, so you could do this:
#include <iostream>
#include <fstream>
using std::ofstream;
using std::cout;
using std::endl;
int main()
{
ofstream myfile;
myfile.open("example.txt");
cout << myfile.is_open() << endl;
myfile << "Writing this to a file.\n";
myfile.close();
}
I actually have an include of CommonUsing.h that I put a few things I do almost everywhere.
#pragma once
#include <chrono>
#include <iostream>
#include <date/date.h>
//======================================================================
// The most common using statements I do in most of my code.
//======================================================================
using std::cout;
using std::cerr;
using std::endl;
using std::string;
using namespace std::chrono_literals;
using date::operator<<;
I'm trying to use the library ZBar to read QRCode with c++. I am not an expert about this language. I have the following problem:
#include <iostream>
#include <zbar.h>
using namespace std;
using namespace zbar;
int main()
{
cout << "Hello World!" << endl;
//Image image;
return 0;
}
This code does actually print the "Hello World" as expected. But if I remove the comment, obtaining the following code:
#include <iostream>
#include <zbar.h>
using namespace std;
using namespace zbar;
int main()
{
cout << "Hello World!" << endl;
Image image;
return 0;
}
Everything is still compiled correctly, with no errors or warnings, but I don't obtain any output!! The program reaches the end without executing any instruction!
I just used this code to semplify, but the problem actually is that, as soon as I add an instruction using classes from zbar, it seems like I am "clearing" the main! How is it possible? What should I do? Thank you!
This is really driving me crazy:
#include <iostream>
#include <vector>
#include <string.h>
#include <thread>
using namespace std;
void test() {
vector<string> myvector;
string a("Teststring");
myvector.push_back(a);
cout << myvector.begin()->length() << endl;
}
int main() {
thread(test).join();
return 0;
}
The code compiles fine with the -std=c++11 flag to the compiler and the -pthread flag to the linker.
BUT: Eclipse does either know the std::thread or the myvector.begin()->length(), even if the code runs fine eclipse warns me "Method 'length' could not be resolved".
I tried every possible solution in here: Eclipse CDT C++11/C++0x support without any success. This took me so many hours now, what am I doing wrong?!
Is there anybody getting a project setup without problems with this code?
EDIT: Other code example - same problem:
#include <iostream>
#include <vector>
#include <thread>
using namespace std;
class TestClass {
public:
void test() {
cout << "test" << endl;
}
};
void test() {
vector<TestClass> testClassVector;
TestClass x;
testClassVector.push_back(x);
testClassVector.begin()->test();
}
int main() {
thread(test).join();
return 0;
}
Compiles and runs correct, but returns in eclipse: Method 'test' could not be resolved
EDIT:
working versions:
((TestClass)*(testClassVector.begin())).test();
TestClass foo2 = *(testClassVector.begin());
foo2.test();
still not working:
testClassVector.begin()->test();
The last compiles and works like the two above, but eclipse still claims:
Method 'test' could not be resolved
Maybe I'm wrong, but I think your problem don't come from Eclypse. Juste, begin() on a vector return a std::vector<T>::iterator first, this is not a pointer and there is no method length, but you can ask for the vector size with myvector.size(); if this is what you want.
The problem could come from your #include <string.h> that is not the same as #include <string>, string.h is for string operation like strcmp, strstr, etc... juste string will define the std::string object.
I don't have Eclipse set up but the problem appears to be around std::string. Does the problem go away if you remove the threading from the example? (I also changed to #include <string> instead of string.h)
#include <iostream>
#include <vector>
#include <string>
#include <thread>
using namespace std;
#if 0
void test() {
vector<string> myvector;
string a("Teststring");
myvector.push_back(a);
cout << myvector.begin()->length() << endl;
}
#endif
int main() {
//thread(test).join();
vector<string> myvector;
string a("Teststring");
myvector.push_back(a);
cout << myvector.begin()->length() << endl;
return 0;
}
That should hopefully print out 10.
Update from comment:
Does this generate the Eclipse warning?
auto tmp = *(myvector.begin());
std::cout << tmp.length() << std::endl;
What about this?
std::string foo("abc123");
std::cout << foo.length() << std::endl;
I guess one more too:
std::string foo2 = *(myvector.begin());
std::cout << foo2.length() << std::endl;
The solution found:
I downloaded eclipse kepler Kepler
Created a new project and tried to compile this source code (like above):
#include <iostream>
#include <vector>
#include <thread>
using namespace std;
class TestClass {
public:
void test() {
cout << "test" << endl;
}
};
void test() {
vector<TestClass> testClassVector;
TestClass x;
testClassVector.push_back(x);
testClassVector.begin()->test();
}
int main() {
thread(test).join();
return 0;
}
On the first run eclipse told me, thread belongs to the new c++11 standard and I have to add -std=c++11 to the compiler flags. To use thread I also added -pthread to the linker flags. With this steps the code could be compiled, but eclipse marks the thread still as unknown. To fix this I proceeded the following step:
Under C/C++ Build (at project settings), find the Preprocessor Include Path and go to the Providers Tab. Deselect all except CDT GCC Builtin Compiler Settings. Then untag Share settings entries … . Add the option -std=c++11 to the text box called Command to get compiler specs.
Found here.
Now - unbelievable but true - it works, even without any errors marked by eclipse. The solution is using the (beta) version of eclipse, wich seems to handle this in a better way.
Thanks for all your help!
I am working on the 'driver' part of my programing assignment and i keep getting this absurd error:
error C2065: 'cout' : undeclared identifier
I have even tried using the std::cout but I get another error that says:
IntelliSense: namespace "std" has no member "cout"
When I have declared using namespace std, included iostream and I even tried to use ostream
#include <iostream>
using namespace std;
int main () {
cout << "hey" << endl;
return 0;
}
I'm using Visual Studio 2010 and running Windows 7. All of the .h files have using namespace std and include iostream and ostream.
In Visual Studio you must #include "stdafx.h" and be the first include of the cpp file. For instance:
These will not work.
#include <iostream>
using namespace std;
int main () {
cout << "hey" << endl;
return 0;
}
#include <iostream>
#include "stdafx.h"
using namespace std;
int main () {
cout << "hey" << endl;
return 0;
}
This will do.
#include "stdafx.h"
#include <iostream>
using namespace std;
int main () {
cout << "hey" << endl;
return 0;
}
Here is a great answer on what the stdafx.h header does.
write this code, it works perfectly..
#include "stdafx.h"
#include <iostream>
using namespace std;
int main()
{
cout<<"Hello World!";
return 0;
}
I had same problem on Visual Studio C++ 2010. It's easy to fix. Above the main() function just replace the standard include lines with this below but with the pound symbol in front of the includes.
# include "stdafx.h"
# include <iostream>
using namespace std;
The include "stdafx.h" is ok
But you can't use cout unless you have included using namespace std
If you have not included namespace std you have to write std::cout instead of simple cout
If the only file you include is iostream and it still says undefined, then maybe iostream doesn't contain what it's supposed to. Is it possible that you have an empty file coincidentally named "iostream" in your project?
I have seen that if you use
#include <iostream.h>
then you will get the problem.
If you use
#include <iostream>
(notice - without the .h)
then you will not get the problem you mentioned.
If you started a project requiring the #include "stdafx.h" line, put it first.
I've seen similar things happen when I was using the .c file extension with C++ code. Other than that, I'd have to agree with everyone about a buggy installation. Does it work if you try to compile the project with an earlier release of VS? Try VC++ Express 2008. Its free on msdn.
Such a silly solution in my case:
// Example a
#include <iostream>
#include "stdafx.h"
The above was odered as per example a, when I changed it to resemble example b below...
// Example b
#include "stdafx.h"
#include <iostream>
My code compiled like a charm. Try it, guaranteed to work.
The code below compiles and runs properly for me using gcc. Try copy/pasting this and see if it works.
#include <iostream>
using namespace std;
int bob (int a) { cout << "hey" << endl; return 0; };
int main () {
int a = 1;
bob(a);
return 0;
}
I have VS2010, Beta 1 and Beta 2 (one on my work machine and one at home), and I've used std plenty without issues. Try typing:
std::
And see if Intellisense gives you anything. If it gives you the usual stuff (abort, abs, acos, etc.), except for cout, well then, that is quite a puzzler. Definitely look into your C++ headers in that case.
Beyond that, I would just add to make sure you're running a regular, empty project (not CLR, where Intellisense is crippled), and that you've actually attempted to build the project at least once. As I mentioned in a comment, VS2010 parses files once you've added an include; it could be that something stuck the parser and it didn't "find" cout right away. (In which case, try restarting VS maybe?)
Take the code
#include <iostream>
using namespace std;
out of your .cpp file, create a header file and put this in the .h file. Then add
#include "whatever your header file is named.h"
at the top of your .cpp code. Then run it again.
I had the same issue when starting a ms c++ 2010 project from scratch - I removed all of the header files generated by ms and but used:
#include "stdafx.h"
#include <iostream>
using namespace std;
int main() {
cout << "hey" << endl;
return 0;
}
I had to include stdafx.h as it caused an error not having it in.
Try it, it will work. I checked it in Windows XP, Visual Studio 2010 Express.
#include "stdafx.h"
#include <iostream>
using namespace std;
void main( )
{
int i = 0;
cout << "Enter a number: ";
cin >> i;
}
before you begin this program get rid of all the code and do a simple hello world inside of main. Only include iostream and using namespace std;.
Little by little add to it to find your issue.
cout << "hi" << endl;
Are you sure it's compiling as C++? Check your file name (it should end in .cpp). Check your project settings.
There's simply nothing wrong with your program, and cout is in namespace std. Your installation of VS 2010 Beta 2 is defective, and I don't think it's just your installation.
I don't think VS 2010 is ready for C++ yet. The standard "Hello, World" program didn't work on Beta 1. I just tried creating a test Win32 console application, and the generated test.cpp file didn't have a main() function.
I've got a really, really bad feeling about VS 2010.
When you created your project, you did not set 'use precompiled headers' correctly. Change it in properties->C/C++->precompiled headers.
In Visual studio use all your header filer below "stdafx.h".
Just use printf!
Include stdio.h in your stdafx.h header file for printf.
Include the std library by inserting the following line at the top of your code:
using namespace std;
is normally stored in the C:\Program Files\Microsoft Visual Studio 8\VC\include folder. First check if it is still there. Then choose Tools + Options, Projects and Solutions, VC++ Directories, choose "Include files" in the "Show Directories for" combobox and double-check that $(VCInstallDir)include is on top of the list.
I ran across this error after just having installed vs 2010 and just trying to get a nearly identical program to work.
I've done vanilla C coding on unix-style boxes before, decided I'd play with this a bit myself.
The first program I tried was:
#include "stdafx.h"
int _tmain(int argc, _TCHAR* argv[])
{
cout << "Hello World!";
return 0;
}
The big thing to notice here... if you've EVER done any C coding,
int _tmain(int argc, _TCHAR* argv[])
Looks weird. it should be:
int main( int argc, char ** argv )
In my case I just changed the program to:
#include <iostream>
using namespace std;
int main()
{
cout << "Hello world from VS 2010!\n";
return 0;
}
And it worked fine.
Note: Use CTRL + F5 so that the console window sticks around so you can see the results.
I came here because I had the same problem, but when I did #include "stdafx.h" it said it did not find that file.
What did the trick for me was: #include <algorithm>.
I use Microsoft Visual Studio 2008.
These are the things that you can use then, incl. 'count': Link
Had this problem, when header files declared "using namespace std;", seems to be confusing for GNU compiler;
anyway is bad style!
Solution was providing std::cout ... in headers and moving "using namespace std" to the implementation file.
In VS2017, stdafx.h seems to be replaced by pch.h see this article,
so use:
#include "pch.h"
#include <iostream>
using namespace std;
int main() {
cout << "Enter 2 numbers:" << endl;
It was the compiler - I'm now using Eclipse Galileo and the program works like a wonder