How to define a regex that will match an exact string like this:
{VAR}
Or anything in this format:
{VAR:10}
{VAR:something}
... meaning if ":" is present, then accept anything to the right of it until the closing }.
So, it should NOT match this:
{VAR2} or {VAR3}, etc.
Right now I am using 2 separate regexes to search for the above 2 scenarios and would like to use one.
It might be a bit crude, but I believe this is what you are looking for:
^{VAR(}|(:[A-Z0-9]+?)})$
This will take the start of the string as {VAR, then check if it either finds one of a } or a : followed by a series of numbers or uppercase characters until it finds a }.
Edit:
I didn't know that OP was looking for Anything after the character, so I have written a new version that will take any character.
^{VAR(}|(:.+)})$
Here is also a Demo of it.
First, I would suggest reading up on lookaheads, look behinds, and the If-Then-Else construct. I recommend this article at www.regular-expressions.info for a detailed explanation
The regex below should capture what you require
{VAR(?(?=:)[^}]*}|})
Demo
The pattern starts with {VAR, as this is constant for all of your scenarios.
We then leverage the if-then-else construct and a positive look ahead to check for a colon (?(?=:) and match everything up to and including the closing brace if a colon exists with [^}]*}. If a colon does not exist, the portion after the or | will only match a closing brace }.
Try Regex: {VAR}|(?<={VAR:)\w+(?=})
Demo
Related
I've been looking around and could not make this happen. I am not totally noob.
I need to get text delimited by (including) START and END that doesn't contain START. Basically I can't find a way to negate a whole word without using advanced stuff.
Example string:
abcSTARTabcSTARTabcENDabc
The expected result:
STARTabcEND
Not good:
STARTabcSTARTabcEND
I can't use backward search stuff. I am testing my regex here: www.regextester.com
Thanks for any advice.
Try this
START(?!.*START).*?END
See it here online on Regexr
(?!.*START) is a negative lookahead. It ensures that the word "START" is not following
.*? is a non greedy match of all characters till the next "END". Its needed, because the negative lookahead is just looking ahead and not capturing anything (zero length assertion)
Update:
I thought a bit more, the solution above is matching till the first "END". If this is not wanted (because you are excluding START from the content) then use the greedy version
START(?!.*START).*END
this will match till the last "END".
START(?:(?!START).)*END
will work with any number of START...END pairs. To demonstrate in Python:
>>> import re
>>> a = "abcSTARTdefENDghiSTARTjlkENDopqSTARTrstSTARTuvwENDxyz"
>>> re.findall(r"START(?:(?!START).)*END", a)
['STARTdefEND', 'STARTjlkEND', 'STARTuvwEND']
If you only care for the content between START and END, use this:
(?<=START)(?:(?!START).)*(?=END)
See it here:
>>> re.findall(r"(?<=START)(?:(?!START).)*(?=END)", a)
['def', 'jlk', 'uvw']
The really pedestrian solution would be START(([^S]|S*S[^ST]|ST[^A]|STA[^R]|STAR[^T])*(S(T(AR?)?)?)?)END. Modern regex flavors have negative assertions which do this more elegantly, but I interpret your comment about "backwards search" to perhaps mean you cannot or don't want to use this feature.
Update: Just for completeness, note that the above is greedy with respect to the end delimiter. To only capture the shortest possible string, extend the negation to also cover the end delimiter -- START(([^ES]|E*E[^ENS]|EN[^DS]|S*S[^STE]|ST[^AE]|STA[^RE]|STAR[^TE])*(S(T(AR?)?)?|EN?)?)END. This risks to exceed the torture threshold in most cultures, though.
Bug fix: A previous version of this answer had a bug, in that SSTART could be part of the match (the second S would match [^T], etc). I fixed this but by the addition of S in [^ST] and adding S* before the non-optional S to allow for arbitrary repetitions of S otherwise.
May I suggest a possible improvement on the solution of Tim Pietzcker?
It seems to me that START(?:(?!START).)*?END is better in order to only catch a START immediately followed by an END without any START or END in between. I am using .NET and Tim's solution would match also something like START END END. At least in my personal case this is not wanted.
[EDIT: I have left this post for the information on capture groups but the main solution I gave was not correct.
(?:START)((?:[^S]|S[^T]|ST[^A]|STA[^R]|STAR[^T])*)(?:END)
as pointed out in the comments would not work; I was forgetting that the ignored characters could not be dropped and thus you would need something such as ...|STA(?![^R])| to still allow that character to be part of END, thus failing on something such as STARTSTAEND; so it's clearly a better choice; the following should show the proper way to use the capture groups...]
The answer given using the 'zero-width negative lookahead' operator "?!", with capture groups, is: (?:START)((?!.*START).*)(?:END) which captures the inner text using $1 for the replace. If you want to have the START and END tags captured you could do (START)((?!.*START).*)(END) which gives $1=START $2=text and $3=END or various other permutations by adding/removing ()s or ?:s.
That way if you are using it to do search and replace, you can do, something like BEGIN$1FINISH. So, if you started with:
abcSTARTdefSTARTghiENDjkl
you would get ghi as capture group 1, and replacing with BEGIN$1FINISH would give you the following:
abcSTARTdefBEGINghiFINISHjkl
which would allow you to change your START/END tokens only when paired properly.
Each (x) is a group, but I have put (?:x) for each of the ones except the middle which marks it as a non-capturing group; the only one I left without a ?: was the middle; however, you could also conceivably capture the BEGIN/END tokens as well if you wanted to move them around or what-have-you.
See the Java regex documentation for full details on Java regexes.
My string being of the form:
"as.asd.sd fdsfs. dfsd d.sdfsd. sdfsdf sd .COM"
I only want to match against the last segment of whitespace before the last period(.)
So far I am able to capture whitespace but not the very last occurrence using:
\s+(?=\.\w)
How can I make it less greedy?
In a general case, you can match the last occurrence of any pattern using the following scheme:
pattern(?![\s\S]*pattern)
(?s)pattern(?!.*pattern)
pattern(?!(?s:.*)pattern)
where [\s\S]* matches any zero or more chars as many as possible. (?s) and (?s:.) can be used with regex engines that support these constructs so as to use . to match any chars.
In this case, rather than \s+(?![\s\S]*\s), you may use
\s+(?!\S*\s)
See the regex demo. Note the \s and \S are inverse classes, thus, it makes no sense using [\s\S]* here, \S* is enough.
Details:
\s+ - one or more whitespace chars
(?!\S*\s) - that are not immediately followed with any 0 or more non-whitespace chars and then a whitespace.
You can try like so:
(\s+)(?=\.[^.]+$)
(?=\.[^.]+$) Positive look ahead for a dot and characters except dot at the end of line.
Demo:
https://regex101.com/r/k9VwC6/3
"as.asd.sd ffindMyLastOccurrencedsfs. dfindMyLastOccurrencefsd d.sdfsd. sdfsdf sd ..COM"
.*(?=((?<=\S)\s+)).*
replaced by `>\1<`
> <
As a more generalized example
This example defines several needles and finds the last occurrence of either one of them. In this example the needles are:
defined word findMyLastOccurrence
whitespaces (?<=\S)\s+
dots (?<=[^\.])\.+
"as.asd.sd ffindMyLastOccurrencedsfs. dfindMyLastOccurrencefsd d.sdfsd. sdfsdf sd ..COM"
.*(?=(findMyLastOccurrence|(?<=\S)\s+|(?<=[^\.])\.+)).*
replaced by `>\1<`
>..<
Explanation:
Part 1 .*
is greedy and finds everything as long as the needles are found. Thus, it also captures all needle occurrences until the very last needle.
edit to add:
in case we are interested in the first hit, we can prevent the greediness by writing .*?
Part 2 (?=(findMyLastOccurrence|(?<=\S)\s+|(?<=[^\.])\.+|(?<=**Not**NeedlePart)NeedlePart+))
defines the 'break' condition for the greedy 'find-all'. It consists of several parts:
(?=(needles))
positive lookahead: ensure that previously found everything is followed by the needles
findMyLastOccurrence|(?<=\S)\s+|(?<=[^\.])\.+)|(?<=**Not**NeedlePart)NeedlePart+
several needles for which we are looking. Needles are patterns themselves.
In case we look for a collection of whitespaces, dots or other needleparts, the pattern we are looking for is actually: anything which is not a needlepart, followed by one or more needleparts (thus needlepart is +). See the example for whitespaces \s negated with \S, actual dot . negated with [^.]
Part 3 .*
as we aren't interested in the remainder, we capture it and dont use it any further. We could capture it with parenthesis and use it as another group, but that's out of scope here
SIMPLE SOLUTION for a COMMON PROBLEM
All of the answers that I have read through are way off topic, overly complicated, or just simply incorrect. This question is a common problem that regex offers a simple solution for.
Breaking Down the General Problem
THE STRING
The generalized problem is such that there is a string that contains several characters.
THE SUB-STRING
Within the string is a sub-string made up of a few characters. Often times this is a file extension (i.e .c, .ts, or .json), or a top level domain (i.e. .com, .org, or .io), but it could be something as arbitrary as MC Donald's Mulan Szechuan Sauce. The point it is, it may not always be something simple.
THE BEFORE VARIANCE (Most important part)
The before variance is an arbitrary character, or characters, that always comes just before the sub-string. In this question, the before variance is an unknown amount of white-space. Its a variance because the amount of white-space that needs to be match against varies (or has a dynamic quantity).
Describing the Solution in Reference to the Problem
(Solution Part 1)
Often times when working with regular expressions its necessary to work in reverse.
We will start at the end of the problem described above, and work backwards, henceforth; we are going to start at the The Before Variance (or #3)
So, as mentioned above, The Before Variance is an unknown amount of white-space. We know that it includes white-space, but we don't know how much, so we will use the meta sequence for Any Whitespce with the one or more quantifier.
The Meta Sequence for "Any Whitespace" is \s.
The "One or More" quantifier is +
so we will start with...
NOTE: In ECMAS Regex the / characters are like quotes around a string.
const regex = /\s+/g
I also included the g to tell the engine to set the global flag to true. I won't explain flags, for the sake of brevity, but if you don't know what the global flag does, you should DuckDuckGo it.
(Solution Part 2)
Remember, we are working in reverse, so the next part to focus on is the Sub-string. In this question it is .com, but the author may want it to match against a value with variance, rather than just the static string of characters .com, therefore I will talk about that more below, but to stay focused, we will work with .com for now.
It's necessary that we use a concept here that's called ZERO LENGTH ASSERTION. We need a "zero-length assertion" because we have a sub-string that is significant, but is not what we want to match against. "Zero-length assertions" allow us to move the point in the string where the regular expression engine is looking at, without having to match any characters to get there.
The Zero-Length Assertion that we are going to use is called LOOK AHEAD, and its syntax is as follows.
Look-ahead Syntax: (?=Your-SubStr-Here)
We are going to use the look ahead to match against a variance that comes before the pattern assigned to the look-ahead, which will be our sub-string. The result looks like this:
const regex = /\s+(?=\.com)/gi
I added the insensitive flag to tell the engine to not be concerned with the case of the letter, in other words; the regular expression /\s+(?=\.cOM)/gi
is the same as /\s+(?=\.Com)/gi, and both are the same as: /\s+(?=\.com)/gi &/or /\s+(?=.COM)/gi. Everyone of the "Just Listed" regular expressions are equivalent so long as the i flag is set.
That's it! The link HERE (REGEX101) will take you to an example where you can play with the regular expression if you like.
I mentioned above working with a sub-string that has more variance than .com.
You could use (\s*)(?=\.\w{3,}) for instance.
The problem with this regex, is even though it matches .txt, .org, .json, and .unclepetespurplebeet, the regex isn't safe. When using the question's string of...
"as.asd.sd fdsfs. dfsd d.sdfsd. sdfsdf sd .COM"
as an example, you can see at the LINK HERE (Regex101) there are 3 lines in the string. Those lines represent areas where the sub-string's lookahead's assertion returned true. Each time the assertion was true, a possibility for an incorrect final match was created. Though, only one match was returned in the end, and it was the correct match, when implemented in a program, or website, that's running in production, you can pretty much guarantee that the regex is not only going to fail, but its going to fail horribly and you will come to hate it.
You can try this. It will capture the last white space segment - in the first capture group.
(\s+)\.[^\.]*$
I'm sure this is a simple question for someone at ease with regular expressions:
I need to match everything up until the character #
I don't want the string following the # character, just the stuff before it, and the character itself should not be matched. This is the most important part, and what I'm mainly asking. As a second question, I would also like to know how to match the rest, after the # character. But not in the same expression, because I will need that in another context.
Here's an example string:
topics/install.xml#id_install
I want only topics/install.xml. And for the second question (separate expression) I want id_install
First expression:
^([^#]*)
Second expression:
#(.*)$
[a-zA-Z0-9]*[\#]
If your string contains any other special characters you need to add them into the first square bracket escaped.
I don't use C#, but i will assume that it uses pcre... if so,
"([^#]*)#.*"
with a call to 'match'. A call to 'search' does not need the trailing ".*"
The parens define the 'keep group'; the [^#] means any character that is not a '#'
You probably tried something like
"(.*)#.*"
and found that it fails when multiple '#' signs are present (keeping the leading '#'s)?
That is because ".*" is greedy, and will match as much as it can.
Your matcher should have a method that looks something like 'group(...)'. Most matchers
return the entire matched sequence as group(0), the first paren-matched group as group(1),
and so forth.
PCRE is so important i strongly encourage you to search for it on google, learn it, and always have it in your programming toolkit.
Use look ahead and look behind:
To get all characters up to, but not including the pound (#): .*?(?=\#)
To get all characters following, but not including the pound (#): (?<=\#).*
If you don't mind using groups, you can do it all in one shot:
(.*?)\#(.*) Your answers will be in group(1) and group(2). Notice the non-greedy construct, *?, which will attempt to match as little as possible instead of as much as possible.
If you want to allow for missing # section, use ([^\#]*)(?:\#(.*))?. It uses a non-collecting group to test the second half, and if it finds it, returns everything after the pound.
Honestly though, for you situation, it is probably easier to use the Split method provided in String.
More on lookahead and lookbehind
first:
/[^\#]*(?=\#)/ edit: is faster than /.*?(?=\#)/
second:
/(?<=\#).*/
For something like this in C# I would usually skip the regular expressions stuff altogether and do something like:
string[] split = exampleString.Split('#');
string firstString = split[0];
string secondString = split[1];
I've been looking around and could not make this happen. I am not totally noob.
I need to get text delimited by (including) START and END that doesn't contain START. Basically I can't find a way to negate a whole word without using advanced stuff.
Example string:
abcSTARTabcSTARTabcENDabc
The expected result:
STARTabcEND
Not good:
STARTabcSTARTabcEND
I can't use backward search stuff. I am testing my regex here: www.regextester.com
Thanks for any advice.
Try this
START(?!.*START).*?END
See it here online on Regexr
(?!.*START) is a negative lookahead. It ensures that the word "START" is not following
.*? is a non greedy match of all characters till the next "END". Its needed, because the negative lookahead is just looking ahead and not capturing anything (zero length assertion)
Update:
I thought a bit more, the solution above is matching till the first "END". If this is not wanted (because you are excluding START from the content) then use the greedy version
START(?!.*START).*END
this will match till the last "END".
START(?:(?!START).)*END
will work with any number of START...END pairs. To demonstrate in Python:
>>> import re
>>> a = "abcSTARTdefENDghiSTARTjlkENDopqSTARTrstSTARTuvwENDxyz"
>>> re.findall(r"START(?:(?!START).)*END", a)
['STARTdefEND', 'STARTjlkEND', 'STARTuvwEND']
If you only care for the content between START and END, use this:
(?<=START)(?:(?!START).)*(?=END)
See it here:
>>> re.findall(r"(?<=START)(?:(?!START).)*(?=END)", a)
['def', 'jlk', 'uvw']
The really pedestrian solution would be START(([^S]|S*S[^ST]|ST[^A]|STA[^R]|STAR[^T])*(S(T(AR?)?)?)?)END. Modern regex flavors have negative assertions which do this more elegantly, but I interpret your comment about "backwards search" to perhaps mean you cannot or don't want to use this feature.
Update: Just for completeness, note that the above is greedy with respect to the end delimiter. To only capture the shortest possible string, extend the negation to also cover the end delimiter -- START(([^ES]|E*E[^ENS]|EN[^DS]|S*S[^STE]|ST[^AE]|STA[^RE]|STAR[^TE])*(S(T(AR?)?)?|EN?)?)END. This risks to exceed the torture threshold in most cultures, though.
Bug fix: A previous version of this answer had a bug, in that SSTART could be part of the match (the second S would match [^T], etc). I fixed this but by the addition of S in [^ST] and adding S* before the non-optional S to allow for arbitrary repetitions of S otherwise.
May I suggest a possible improvement on the solution of Tim Pietzcker?
It seems to me that START(?:(?!START).)*?END is better in order to only catch a START immediately followed by an END without any START or END in between. I am using .NET and Tim's solution would match also something like START END END. At least in my personal case this is not wanted.
[EDIT: I have left this post for the information on capture groups but the main solution I gave was not correct.
(?:START)((?:[^S]|S[^T]|ST[^A]|STA[^R]|STAR[^T])*)(?:END)
as pointed out in the comments would not work; I was forgetting that the ignored characters could not be dropped and thus you would need something such as ...|STA(?![^R])| to still allow that character to be part of END, thus failing on something such as STARTSTAEND; so it's clearly a better choice; the following should show the proper way to use the capture groups...]
The answer given using the 'zero-width negative lookahead' operator "?!", with capture groups, is: (?:START)((?!.*START).*)(?:END) which captures the inner text using $1 for the replace. If you want to have the START and END tags captured you could do (START)((?!.*START).*)(END) which gives $1=START $2=text and $3=END or various other permutations by adding/removing ()s or ?:s.
That way if you are using it to do search and replace, you can do, something like BEGIN$1FINISH. So, if you started with:
abcSTARTdefSTARTghiENDjkl
you would get ghi as capture group 1, and replacing with BEGIN$1FINISH would give you the following:
abcSTARTdefBEGINghiFINISHjkl
which would allow you to change your START/END tokens only when paired properly.
Each (x) is a group, but I have put (?:x) for each of the ones except the middle which marks it as a non-capturing group; the only one I left without a ?: was the middle; however, you could also conceivably capture the BEGIN/END tokens as well if you wanted to move them around or what-have-you.
See the Java regex documentation for full details on Java regexes.
Let's say I have a regular expression that works correctly to find all of the URLs in a text file:
(http://)([a-zA-Z0-9\/\.])*
If what I want is not the URLs but the inverse - all other text except the URLs - is there an easy modification to make to get this?
You could simply search and replace everything that matches the regular expression with an empty string, e.g. in Perl s/(http:\/\/)([a-zA-Z0-9\/\.])*//g
This would give you everything in the original text, except those substrings that match the regular expression.
If for some reason you need a regex-only solution, try this:
((?<=http://[a-zA-Z0-9\/\.#?/%]+(?=[^a-zA-Z0-9\/\.#?/%]))|\A(?!http://[a-zA-Z0-9\/\.#?/%])).+?((?=http://[a-zA-Z0-9\/\.#?/%])|\Z)
I expanded the set of of URL characters a little ([a-zA-Z0-9\/\.#?/%]) to include a few important ones, but this is by no means meant to be exact or exhaustive.
The regex is a bit of a monster, so I'll try to break it down:
(?<=http://[a-zA-Z0-9\/\.#?/%]+(?=[^a-zA-Z0-9\/\.#?/%])
The first potion matches the end of a URL. http://[a-zA-Z0-9\/\.#?/%]+ matches the URL itself, while (?=[^a-zA-Z0-9\/\.#?/%]) asserts that the URL must be followed by a non-URL character so that we are sure we are at the end. A lookahead is used so that the non-URL character is sought but not captured. The whole thing is wrapped in a lookbehind (?<=...) to look for it as the boundary of the match, again without capturing that portion.
We also want to match a non-URL at the beginning of the file. \A(?!http://[a-zA-Z0-9\/\.#?/%]) matches the beginning of the file (\A), followed by a negative lookahead to make sure there's not a URL lurking at the start of the file. (This URL check is simpler than the first one because we only need the beginning of the URL, not the whole thing.)
Both of those checks are put in parenthesis and OR'd together with the | character. After that, .+? matches the string we are trying to capture.
Then we come to ((?=http://[a-zA-Z0-9\/\.#?/%])|\Z). Here, we check for the beginning of a URL, once again with (?=http://[a-zA-Z0-9\/\.#?/%]). The end of the file is also a pretty good sign that we've reached the end of our match, so we should look for that, too, using \Z. Similarly to a first big group, we wrap it in parenthesis and OR the two possibilities together.
The | symbol requires the parenthesis because its precedence is very low, so you have to explicitly state the boundaries of the OR.
This regex relies heavily on zero-width assertions (the \A and \Z anchors, and the lookaround groups). You should always understand a regex before you use it for anything serious or permanent (otherwise you might catch a case of perl), so you might want to check out Start of String and End of String Anchors and Lookahead and Lookbehind Zero-Width Assertions.
Corrections welcome, of course!
If I understand the question correctly, you can use search/replace...just wildcard around your expression and then substitute the first and last parts.
s/^(.*)(your regex here)(.*)$/$1$3/
im not sure if this will work exactly as you intend but it might help:
Whatever you place in the brackets [] will be matched against. If you put ^ within the bracket, i.e [^a-zA-Z0-9/.] it will match everything except what is in the brackets.
http://www.regular-expressions.info/