I have table plus app and I create eb then deploy my project then connect to database and all thing is good and cool!
I need to connect to database(MYSQL) to import some data to the AWS database so I do these steps:
open new workspace in table plus
take endpoint and username of database and the password and the name of database like so:
press Test button and after wait some times I got this error:
I change the port to also 5432 and got same first error
I change the port to 3306 and got this error:
where is the problem ?
Ok the way i did it was by following this video:
https://www.youtube.com/watch?v=saX75fTwh0M&ab_channel=AdobeinaMinute
In short you need to get the details of your instance and set up an ssh connection to it using its hostname (ie that of the instance not the db), your ec2 username (usually ec2-user) and your pem file. Then you get the connection details for the db and enter them. See the screenshot.
I think that your problem is that the configuration you created is set to a Redshift connection. It expects some network communications that are different from a MySQL connection.
Can you try to create a MySQL connection instead?
I had the same issue but my problem was with the security rules in aws. perhaps, this may help.
Navigate to the console
edit inbound rules of your rds instance
add a new security rule
where: type: 'all traffic', source: anywhere
This video gives a google explanation: aws rds setup
I created a new SQL Server Express with 'admin' username & password.
I added inbound rules in Security Groups to allow all traffic from my laptop's IP address & default gateway (Do I need to do both Ipv4 address & also the gateway for connectivity to go thru?)
When I tried to connect to the newly created SQL Server via SSMS using SQL Server authentication with username admin & password that I used while creating the Instance. The connection fails with the error message below. What am I doing wrong?
TITLE: Connect to Server
Cannot connect to sql-xxxxxxxxxxxxx.rds.amazonaws.com.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
Check Public access for RDS Instance: You are trying to access the RDS instance from your laptop - means trying to access RDS from outside VPC that is hosting the instance. In that case you must enable public access to the RDS instance. This would assign a public IP. You can modify this feature after creating the RDS instance too.
Security Group rules: Port 1433 must be opened for the IP address you would like to access from - your home/work IP address. You can select 'My IP' on source when creating Security Group rules, this will set your IP automatically as source.
PS: Please make sure the subnet where RDS instance is hosted does not have any blocks at NACL level and subnet's route table has route to internet traffic, through Internet Gateway.
How to connect to an instance to a database?
I followed the tutorial, manual and video:
Creating an Amazon RDS DB Instance - Amazon Relational Database Service
Connecting to a DB Instance Running the PostgreSQL Database Engine - Amazon Relational Database Service
When I follow and create the instance for testing even with the public accessibility enabled, when I will try to make the connection through pgAdmin, due to the timeout error. I have to make some more configuration for the connection?
Endpoint (Host): database-teste.c4uzzi1gwwoz.us-east-2.rds.amazonaws.com
Port: 5432
change the security group, in the entry and exit rules, modify the type of postgresSql and change the source of my IP inside box select on both, and set the port range to 5432
I am trying to deploy rds instance with MySQL engine using rds. The database subnet group is in public subnet.
I have performed the following checks:
- The security group is allowed public access on port 3306
- Telnet command successfully on endpoint URL on 3306 port
Configuration as below:
Security group:
Logging details:
anhs-MBP:mykeys anhtrang$ telnet database-1.c9nddsynmhxo.us-east-2.rds.amazonaws.com 3306
Trying 3.130.77.228...
Connected to ec2-3-130-77-228.us-east-2.compute.amazonaws.com.
Escape character is '^]'.
N
5.7.22-log
*!qV/yIp1Blwamysql_native_password
Trying to connect to rds using console
This is due to the problem with MySql driver plugin of InteliJ
I am able to connect to rds instance using mysqlsh commandline tool.
Since MySQL Server 8.0.11 caching_sha2_password is used as default authentication method. Probably IntelliJ MySQL driver do not support this authentication method.
You need to create user with one of the older authentication method, e.g. CREATE USER xyz#localhost IDENTIFIED WITH mysql_native_password BY 'passw0rd'.
More here https://dev.mysql.com/doc/refman/8.0/en/create-user.html and here https://dev.mysql.com/doc/refman/8.0/en/authentication-plugins.html
Am following this tutorial
http://thoughtsandideas.wordpress.com/2012/05/17/monitoring-and-managing-amazon-rds-databases-using-mysql-workbench/
I am not able to Test DB Connection while creating new server instance to connect to the RDS database.
It says Bad_Authentication[allowed_types=public_key], i have a tried different .pem files and have done through a lot of forums.
I have also allowed access to my IP in the DB SecurityGroups for RDS and the Security Groups for EC2.
Please help me out. Thanks.
This worked for me. Assuming you have logged into AWS:
Go to RDS -> Databases -> Select your database
Make sure the Public Accessibility value is Yes
Check your IP address using http://checkip.amazonaws.com/. If it is not added to the Security Rule Groups, you should add it. this step is crucial
3.1. Click on the rule name. This will open up a new tab, then click in the name of the rule.
3.2. Click on Edit inbound rules
3.3. Click on Add new rule, and add a rule with the following values:
Type: MYSQL/Aurora.
Protocol: TCP (default)
Port range: 3306 (default)
Source: My IP -> This will be the IP Address you got at http://checkip.amazonaws.com/.
Fill information in MySQL Workbench
Hostname: Use the value you have for Endpoint at Connectivity and Security
Port: Use the value you have for Port at Connectivity and Security, by default it is 3306.
Username: Use the value you have for master username at Configuration
Password: Use the value you set when you created the database instance.
If you forgot the password, you can change it by clicking on Modify in your database instance)
I hope this also helps you.
In my scenario the problem was simple
I had to enable 3306 port for MYSQL in the related Security group in RDS > db instance section.
For RDS no need to use ssh. You can directly connect the RDS with MySql workbench.
Follow the following steps-
Make sure that in Security Group you should have provide access for MYSQL
Open MySQL workbench and setup New Connection.
Provide a Connection Name.
Connection Method is set to Standard (TCP/IP)
In the HostName provide your RDS end point
Port is 3306
Enter the username what you have given in the RDS.
Test Connection, and provide the password.
That's it.
For Reference GoTo This Link
If you are not using EC2 Instance to connect with RDS DB Instance then DB Instance should have public access to connect.
While launching DB Instance you need to set Publicly Accessible to yes. You will get Public IP to connect from outside network. That means outside of VPC.
You need to launch DB Instance in Public Subnet which has directly access to Internet. To check Subnet has Internet access, you need to check Route Table which was attached with the subnet. In Route table, check Internet Gateway is attached to the subnet.
You don't need to SSH into DB Instance. Though the option is not available also.
In MySQL WorkBench, click on Setup New Connection.
Give connection name. Choose Standard (TCP/IP) option. You are not trying to connect DB Instance over EC2 Instance so the option with SSH with not work out in this case. You have to provide MySQL hostname, username, password and port.
To verify connection, click on Test Connection button.
If you want to use EC2 Instance and connect DB Instance over EC2 Instance, you have to use Standard (TCP/IP) over SSH option. Check the following link
What would prevent me from connecting to a MySQL server on AWS RDS from an AWS EC2 VM?
I had the same issue. I think you need to enable inbound traffic to the VPC. Follow the below article and you'll be fine. Default VPC is not allowing users to access 3306 by default and you need to allow traffic.
RDS and MySQL Connectivity
Make sure Public accessibility should be yes.
Also, Inside security Group section, click on the security link and then add a new rule under inbound rule section which will whitelist your IP address with the below data :
Type: MYSQL/Aurora.
Protocol: TCP (default)
Port range: 3306 (default)
Source: My IP -> This will be the IP Address you got at http://checkip.amazonaws.com/.
Hope this will help to connect with AWS RDS successfully. Thanks!
Based on the details in your question, it seems that you are trying to SSH into the RDS instance. This is not supported on RDS, it only works for EC2 based MySQL servers.
You should instead connect directly to the MySQL server, on port 3306 (or the one you set manually, if this is the case) and using the username and password you created when provisioning the RDS instance. This means using the Connection Type "Standard TCP/IP" in WB.
Also, the public IP address of the machine you're using MySQL Workbench on should be allowed in the RDS security group.
Even I had the same issue, like after trying all the things out there. A thing worked is modifying the RDS database and making it publically accessible. That sorted things out.
All of the other answers are extremely helpful to debug the connection process but for me the literal fix was to not put in the password into the keychain when initializing the MySQL Connections. Instead, I pressed Test and put in the password when prompted to do so. Running on macOS Monterey V.12.3.1 with a MBP M1, 2020