I need a perl regex to match A.CC3 on a line begining with something followed by anything then, my 'A.CC3 " and then anything...
I am surprised this (text =~ /^\W+\CC.*\A\.CC\[3].*/) is not working
Thanks
\A is an escape sequence that denotes beginning of line, or ^ like in the beginning of your regex. Remove the backslash to make it match a literal A.
Edit: You also seem to have \C in there. You should only use backslash to escape meta characters such as period ., or to create escape sequences, such as \Q .. \E.
At its simplest, a regex to match A.CC3 would be
$text =~ /A\.CC3/
That's all you need. This will match any string with A.CC3 in it. In the comments you mention the string you are matching is this:
my $text = "//%CC Unused Static Globals, A.CC3, Halstead Progam Volume";
You might want to avoid partial matches, in which case you can use word boundary \b
$text =~ /\bA\.CC3\b/
You might require that a line begins with //%
$text =~ m#^//%.*\bA\.CC3\b#
Of course, only you know which parts of the string should be matched and in what way. "Something followed by anything followed by A.CC3 followed by anything" really just needs the first simple regex.
It doesn't seem like you're trying to capture anything. If that's the case, and all you need to do is find lines that contain A.CC3 then you can simply do
if ( index( $str, 'A.CC3' ) >= 0 ) # Found it...
No need for a regex.
Try to give this a shot:
^.*?A\.CC.*$
That will match anything until it reaches A, then a literal ., followed by CC, then anything until end of string.
It depends what you want to match. If you want to pull back the whole line in which the A.CC3 pattern occurs then something like this should work:
^.*A\.CC3.*$
I am attempting to edit a csv file, below is a sample line from this file.
|MIGRATE|;|10000|;|2ACC0003|;|30/09/13|;|Positive Adjmt.|;||;|MIGRATE|;|95004U
The beginning of the line |MIGRATE| needs to be modified without changing the second MIGRATE so the line would read
|MIGRATE|;|MIG_IN|;|10000|;|2ACC0003|;|30/09/13|;|Positive Adjmt.|;||;|MIGRATE|;|95004U
There are 7700 or so lines so if I am forced to do this manually I will probably cry a little.
Thanks in advance!
Just replace all the ones you want not changed with another word temporarily, then replace the rest with what you want. I'm not sure what you're asking here, but from what I can guess this might help.
It seems like you could just search for Just search for:
^\|MIGRATE\|
And replace with:
|MIGRATE|;|MIG_IN|
Make sure you've checked 'Regular expression' in the 'Search Mode' options.
Explanation: The ^ is a begin anchor; it will match the beginning of the line, ensuring that it does not match the second |MIGRATE|. The \ characters are required to escape the | characters since they normally have special meaning in regular expressions, and you want to match a literal |.
You can use beginning of line anchors:
Find:
^(\|MIGRATE\|)
Replace with:
$1;|MIG_IN|
regex101 demo
Just make sure that you are using the regular expression mode of the Search&Replace.
If you want to be a bit fancier, you can use a positive lookbehind:
Find:
(?<=^\|MIGRATE\|)
Replace with:
;|MIG_IN|
^ Will match only at the beginning of a line.
( ... ) is called a capture group, and will save the contents of the match in variable you can use (in the first regex, I accessed the variable using $1 in the replace. The first capture gets stored to $1, the second to $2, etc.)
| is a special character meaning 'or' in regex (to match a character or group of characters or another, e.g. a|b matches a or b. As such, you need to escape it with a backslash to make a regex match a literal |.
In my second regex, I used (?<= ... ) which is called a positive lookbehind. It makes sure that the part to be matched has what's inside before it. For instance, (?<=a)b matches a b only if it has an a before it. So that the b in ab matches but not in bb.
The website I linked also explains the details of the regex and you can try out some regex yourself!
I'm parsing through code using a Perl-REGEX parsing engine in my IDE and I want to grab any variables that look like
$hash->{ hash_key04}
and nuke the rest of the code..
So far my very basic REGEX doesnt do what I expected
(.*)(\$hash\-\>\{[\w\s]+\})(.*)
(
\$
hash
\-\>
\{
[\w\s]+
\}
)
I know to use replace for this ($1,$2,etc), but match (.*) before and after the target string doesnt seem to capture all the rest of the code!
UPADTED:
tried matching null but of course thats too greedy.
([^\0]*)
What expression in regex should i use to look only for the string pattern and remove the rest?
The problem is I want to be left with the list of $hash->{} strings after the replace runs in the IDE.
This is better approached from the other direction. Instead of trying to delete everything you don't want, what about extracting everything you do want?
my #vars = $src_text =~ /(\$hash->\{[\w\s]+\})/g;
Breaking down the regex:
/( # start of capture group
\$hash-> # prefix string with $ escaped
\{ # opening escaped delimiter
[\w\s]+ # any word characters or space
\} # closing escaped delimiter
)/g; # match repeatedly returning a list of captures
Here is another way that might fit within your IDE better:
s/(\$hash->\{[\w\s]+\})|./$1/gs;
This regex tries to match one of your hash variables at each location, and if it fails, it deletes the next character and then tries again, which after running over the whole file will have deleted everything you don't want.
Depends on your coding language. What you want is group 2 (The second set of characters in parenthesis). In perl that would be $2, in VIM it would be \2, etc ...
It depends on the platform, but generally, replace the pattern with an empty string.
In javascript,
// prints "the la in ing"
console.log('the latest in testing'.replace(/test/g, ''));
In bash
$ echo 'the latest in testing' | sed 's/test//g'
the la in ing
In C#
Console.WriteLine(Regex.Replace("the latest in testing", "test", ""));
etc
By default the wildcard . won't match newlines. You can enable newlines in its matching set using a flag depending on what regex standard you're using and under what language/api. Or you can add them explicitly yourself by defining a character set:
[.\n\r]* <- Matches any character including newline, carriage return.
Combine this with capture groups to grab desired variables from your code and skip over lines which contain no capture group.
If you want help constructing the proper regex for your context you'll need to paste some input text and specify what the output should be.
I think you want to add a ^ to the beginning of the regex s/^.(PATTERN)(.)$/$1/ so that it starts at the beginning of the line and goes to the end, removing anything except that pattern.
I am doing this in groovy.
Input:
hip_abc_batch hip_ndnh_4_abc_copy_from_stgig abc_copy_from_stgig
hiv_daiv_batch hip_a_de_copy_from_staging abc_a_de_copy_from_staging
I want to get the last column. basically anything that starts with abc_.
I tried the following regex (works for second line but not second.
\abc_.*\
but that gives me everything after abc_batch
I am looking for a regex that will fetch me anything that starts with abc_
but I can not use \^abc_.*\ since the whole string does not start with abc_
It sounds like you're looking for "words" (i.e., sequences that don't include spaces) that begin with abc_. You might try:
/\babc_.*\b/
The \b means (in some regular expression flavors) "word boundary."
Try this:
/\s(abc_.*)$/m
Here is a commented version so you can understand how it works:
\s # match one whitepace character
(abc_.*) # capture a string that starts with "abc_" and is followed
# by any character zero or more times
$ # match the end of the string
Since the regular expression has the "m" switch it will be a multi-line expression. This allows the $ to match the end of each line rather than the end of the entire string itself.
You don't need to trim the whitespace as the second capture group contains just the text. After a cursory scan of this tutorial I believe this is the way to grab the value of a capture group using Groovy:
matcher = (yourString =~ /\s(abc_.*)$/m)
// this is how you would extract the value from
// the matcher object
matcher[0][1]
I think you are looking for this: \s(abc_[a-zA-Z_]*)$
If you are using perl and you read all lines into one string, don't forget to set the the m option on your regex (that stands for "Treat string as multiple lines").
Oh, and Regex Coach is your free friend.
I have a value like this:
"Foo Bar" "Another Value" something else
What regex will return the values enclosed in the quotation marks (e.g. Foo Bar and Another Value)?
In general, the following regular expression fragment is what you are looking for:
"(.*?)"
This uses the non-greedy *? operator to capture everything up to but not including the next double quote. Then, you use a language-specific mechanism to extract the matched text.
In Python, you could do:
>>> import re
>>> string = '"Foo Bar" "Another Value"'
>>> print re.findall(r'"(.*?)"', string)
['Foo Bar', 'Another Value']
I've been using the following with great success:
(["'])(?:(?=(\\?))\2.)*?\1
It supports nested quotes as well.
For those who want a deeper explanation of how this works, here's an explanation from user ephemient:
([""']) match a quote; ((?=(\\?))\2.) if backslash exists, gobble it, and whether or not that happens, match a character; *? match many times (non-greedily, as to not eat the closing quote); \1 match the same quote that was use for opening.
I would go for:
"([^"]*)"
The [^"] is regex for any character except '"'
The reason I use this over the non greedy many operator is that I have to keep looking that up just to make sure I get it correct.
Lets see two efficient ways that deal with escaped quotes. These patterns are not designed to be concise nor aesthetic, but to be efficient.
These ways use the first character discrimination to quickly find quotes in the string without the cost of an alternation. (The idea is to discard quickly characters that are not quotes without to test the two branches of the alternation.)
Content between quotes is described with an unrolled loop (instead of a repeated alternation) to be more efficient too: [^"\\]*(?:\\.[^"\\]*)*
Obviously to deal with strings that haven't balanced quotes, you can use possessive quantifiers instead: [^"\\]*+(?:\\.[^"\\]*)*+ or a workaround to emulate them, to prevent too much backtracking. You can choose too that a quoted part can be an opening quote until the next (non-escaped) quote or the end of the string. In this case there is no need to use possessive quantifiers, you only need to make the last quote optional.
Notice: sometimes quotes are not escaped with a backslash but by repeating the quote. In this case the content subpattern looks like this: [^"]*(?:""[^"]*)*
The patterns avoid the use of a capture group and a backreference (I mean something like (["']).....\1) and use a simple alternation but with ["'] at the beginning, in factor.
Perl like:
["'](?:(?<=")[^"\\]*(?s:\\.[^"\\]*)*"|(?<=')[^'\\]*(?s:\\.[^'\\]*)*')
(note that (?s:...) is a syntactic sugar to switch on the dotall/singleline mode inside the non-capturing group. If this syntax is not supported you can easily switch this mode on for all the pattern or replace the dot with [\s\S])
(The way this pattern is written is totally "hand-driven" and doesn't take account of eventual engine internal optimizations)
ECMA script:
(?=["'])(?:"[^"\\]*(?:\\[\s\S][^"\\]*)*"|'[^'\\]*(?:\\[\s\S][^'\\]*)*')
POSIX extended:
"[^"\\]*(\\(.|\n)[^"\\]*)*"|'[^'\\]*(\\(.|\n)[^'\\]*)*'
or simply:
"([^"\\]|\\.|\\\n)*"|'([^'\\]|\\.|\\\n)*'
Peculiarly, none of these answers produce a regex where the returned match is the text inside the quotes, which is what is asked for. MA-Madden tries but only gets the inside match as a captured group rather than the whole match. One way to actually do it would be :
(?<=(["']\b))(?:(?=(\\?))\2.)*?(?=\1)
Examples for this can be seen in this demo https://regex101.com/r/Hbj8aP/1
The key here is the the positive lookbehind at the start (the ?<= ) and the positive lookahead at the end (the ?=). The lookbehind is looking behind the current character to check for a quote, if found then start from there and then the lookahead is checking the character ahead for a quote and if found stop on that character. The lookbehind group (the ["']) is wrapped in brackets to create a group for whichever quote was found at the start, this is then used at the end lookahead (?=\1) to make sure it only stops when it finds the corresponding quote.
The only other complication is that because the lookahead doesn't actually consume the end quote, it will be found again by the starting lookbehind which causes text between ending and starting quotes on the same line to be matched. Putting a word boundary on the opening quote (["']\b) helps with this, though ideally I'd like to move past the lookahead but I don't think that is possible. The bit allowing escaped characters in the middle I've taken directly from Adam's answer.
The RegEx of accepted answer returns the values including their sourrounding quotation marks: "Foo Bar" and "Another Value" as matches.
Here are RegEx which return only the values between quotation marks (as the questioner was asking for):
Double quotes only (use value of capture group #1):
"(.*?[^\\])"
Single quotes only (use value of capture group #1):
'(.*?[^\\])'
Both (use value of capture group #2):
(["'])(.*?[^\\])\1
-
All support escaped and nested quotes.
I liked Eugen Mihailescu's solution to match the content between quotes whilst allowing to escape quotes. However, I discovered some problems with escaping and came up with the following regex to fix them:
(['"])(?:(?!\1|\\).|\\.)*\1
It does the trick and is still pretty simple and easy to maintain.
Demo (with some more test-cases; feel free to use it and expand on it).
PS: If you just want the content between quotes in the full match ($0), and are not afraid of the performance penalty use:
(?<=(['"])\b)(?:(?!\1|\\).|\\.)*(?=\1)
Unfortunately, without the quotes as anchors, I had to add a boundary \b which does not play well with spaces and non-word boundary characters after the starting quote.
Alternatively, modify the initial version by simply adding a group and extract the string form $2:
(['"])((?:(?!\1|\\).|\\.)*)\1
PPS: If your focus is solely on efficiency, go with Casimir et Hippolyte's solution; it's a good one.
A very late answer, but like to answer
(\"[\w\s]+\")
http://regex101.com/r/cB0kB8/1
The pattern (["'])(?:(?=(\\?))\2.)*?\1 above does the job but I am concerned of its performances (it's not bad but could be better). Mine below it's ~20% faster.
The pattern "(.*?)" is just incomplete. My advice for everyone reading this is just DON'T USE IT!!!
For instance it cannot capture many strings (if needed I can provide an exhaustive test-case) like the one below:
$string = 'How are you? I\'m fine, thank you';
The rest of them are just as "good" as the one above.
If you really care both about performance and precision then start with the one below:
/(['"])((\\\1|.)*?)\1/gm
In my tests it covered every string I met but if you find something that doesn't work I would gladly update it for you.
Check my pattern in an online regex tester.
This version
accounts for escaped quotes
controls backtracking
/(["'])((?:(?!\1)[^\\]|(?:\\\\)*\\[^\\])*)\1/
MORE ANSWERS! Here is the solution i used
\"([^\"]*?icon[^\"]*?)\"
TLDR;
replace the word icon with what your looking for in said quotes and voila!
The way this works is it looks for the keyword and doesn't care what else in between the quotes.
EG:
id="fb-icon"
id="icon-close"
id="large-icon-close"
the regex looks for a quote mark "
then it looks for any possible group of letters thats not "
until it finds icon
and any possible group of letters that is not "
it then looks for a closing "
I liked Axeman's more expansive version, but had some trouble with it (it didn't match for example
foo "string \\ string" bar
or
foo "string1" bar "string2"
correctly, so I tried to fix it:
# opening quote
(["'])
(
# repeat (non-greedy, so we don't span multiple strings)
(?:
# anything, except not the opening quote, and not
# a backslash, which are handled separately.
(?!\1)[^\\]
|
# consume any double backslash (unnecessary?)
(?:\\\\)*
|
# Allow backslash to escape characters
\\.
)*?
)
# same character as opening quote
\1
string = "\" foo bar\" \"loloo\""
print re.findall(r'"(.*?)"',string)
just try this out , works like a charm !!!
\ indicates skip character
My solution to this is below
(["']).*\1(?![^\s])
Demo link : https://regex101.com/r/jlhQhV/1
Explanation:
(["'])-> Matches to either ' or " and store it in the backreference \1 once the match found
.* -> Greedy approach to continue matching everything zero or more times until it encounters ' or " at end of the string. After encountering such state, regex engine backtrack to previous matching character and here regex is over and will move to next regex.
\1 -> Matches to the character or string that have been matched earlier with the first capture group.
(?![^\s]) -> Negative lookahead to ensure there should not any non space character after the previous match
Unlike Adam's answer, I have a simple but worked one:
(["'])(?:\\\1|.)*?\1
And just add parenthesis if you want to get content in quotes like this:
(["'])((?:\\\1|.)*?)\1
Then $1 matches quote char and $2 matches content string.
All the answer above are good.... except they DOES NOT support all the unicode characters! at ECMA Script (Javascript)
If you are a Node users, you might want the the modified version of accepted answer that support all unicode characters :
/(?<=((?<=[\s,.:;"']|^)["']))(?:(?=(\\?))\2.)*?(?=\1)/gmu
Try here.
echo 'junk "Foo Bar" not empty one "" this "but this" and this neither' | sed 's/[^\"]*\"\([^\"]*\)\"[^\"]*/>\1</g'
This will result in: >Foo Bar<><>but this<
Here I showed the result string between ><'s for clarity, also using the non-greedy version with this sed command we first throw out the junk before and after that ""'s and then replace this with the part between the ""'s and surround this by ><'s.
From Greg H. I was able to create this regex to suit my needs.
I needed to match a specific value that was qualified by being inside quotes. It must be a full match, no partial matching could should trigger a hit
e.g. "test" could not match for "test2".
reg = r"""(['"])(%s)\1"""
if re.search(reg%(needle), haystack, re.IGNORECASE):
print "winning..."
Hunter
If you're trying to find strings that only have a certain suffix, such as dot syntax, you can try this:
\"([^\"]*?[^\"]*?)\".localized
Where .localized is the suffix.
Example:
print("this is something I need to return".localized + "so is this".localized + "but this is not")
It will capture "this is something I need to return".localized and "so is this".localized but not "but this is not".
A supplementary answer for the subset of Microsoft VBA coders only one uses the library Microsoft VBScript Regular Expressions 5.5 and this gives the following code
Sub TestRegularExpression()
Dim oRE As VBScript_RegExp_55.RegExp '* Tools->References: Microsoft VBScript Regular Expressions 5.5
Set oRE = New VBScript_RegExp_55.RegExp
oRE.Pattern = """([^""]*)"""
oRE.Global = True
Dim sTest As String
sTest = """Foo Bar"" ""Another Value"" something else"
Debug.Assert oRE.test(sTest)
Dim oMatchCol As VBScript_RegExp_55.MatchCollection
Set oMatchCol = oRE.Execute(sTest)
Debug.Assert oMatchCol.Count = 2
Dim oMatch As Match
For Each oMatch In oMatchCol
Debug.Print oMatch.SubMatches(0)
Next oMatch
End Sub