I installed netbeans C++ on windows 7 and used Cywgin4 as the compiler. When I run any program even a simple Hello world it does compile and run however I also get the error below. I can't seem to find any reference to it online. Can anyone point me in the right direction for a solution? Thanks!
read from master failed
: Input/output error
RUN FAILED (exit value 1, total time: 47ms)
I do not understand all the surrounding details of this problem as I am new to C/C++. However, if you:
Open up NetBeans
Right click on your C++ project file
Select "Properties"
There should be a category called "Run".
Under this category, find the option called Console Type and make sure that Standard Output is selected as shown in the screenshot below:
I was having the same problems when the console type was selected as Internal Terminal.
For my setup, changing this option to Standard Output got rid of this error. However, I do not fully understand how this change affects the overall properties of my project. Wish you good luck.
I recently reinstalled Cygwin on my computer in order to get access to several command line elements that I was missing. I have never had previous difficulty with Cygwin, but after this reinstallation, an error message continues to appear after (almost) each command entered. For instance:
-bash-4.1$ wc m1.txt
3 [main] bash 2216 child_info_fork::abort: data segment start: parent(0x26D000) != child(0x38D000)
-bash: fork: retry: Resource temporarily unavailable
2013930 4027950 74968256 m1.txt
Generally, the command still runs (as seen above), but not always. Occasionally, the 'error' message occurs several times in a row (the initial number "3" will then change to a "4" or "2", notably if I start a second Cygwin window.
Also, as soon as I start up Cygwin, I get the following message before the prompt:
3 [main] bash 6140 child_info_fork::abort: data segment start: parent(0x26D000) != child(0x36D000)
-bash: fork: retry: Resource temporarily unavailable
-bash: fork: Resource temporarily unavailable
-bash-4.1$
At the moment, I am debating whether to uninstall/reinstall Cygwin again or just live with the error messages, but I was curious if there might be an issue that I am unaware of.
(assuming Cygwin is installed at C:\Cygwin):
Open Task Manager and close any processes that look to be Cygwin related.
Open C:\Cygwin\bin in Windows Explorer
Verify that dash.exe, ash.exe, rebase.exe, and rebaseall exist in this folder
If any of them are missing, re-run Cygwin setup and select the dash, ash, and rebase packages
right-click your C:\Cygwin folder, uncheck Read-only (if its checked), and press OK.
When an error about not being able to switch some files comes up, select "Ignore All". Wait for this process to complete.
Browse to C:\Cygwin\bin in Windows Explorer
Right click dash.exe and click "Run as Administrator". A command Prompt should appear with nothing but a $
Type /usr/bin/rebaseall -v, hit enter, and wait for the process to complete.
If you get errors about Cygwin processes running, try Step 1 again. If that still doesn't work, Restart your computer into safe mode and try these steps again.
A commenter noted that, depending on your settings, you may have to type cd /usr/bin && ./rebaseall -v instead.
Try opening Cygwin again.
This process worked for me. I hope it works for you guys too.
Source: http://cygwin.wikia.com/wiki/Rebaseall
I would like to add the following to the above answers, as it is what I had to do after reinstalling Cygwin:
Navigate to the "/usr/bin" directory (usually, C:\cygwin\bin) and right click, Run as Administrator the file: dash.exe
Then, at the $ prompt type the following, hitting enter after each line:
cd /usr/bin/
/usr/bin/peflags * -d 1
/usr/bin/rebaseall -v
What it does is, it marks the dll's as "rebase-able," and then rebases them. You have to have peflags.exe in addition to the above files (in previous answers). You may have to restart windows after doing this and you will definitely need to make sure that there are no processes nor services belonging to cygwin running. (Use task manager, kill any related processes, and then under the services tab look for any service starting with CYG and stop it.)
After doing this, I was able to get cygwin to run without any errors about dll's being loaded to the wrong addresses aka fork errors, etc.
I hope that this helps others, as it was a pain to find.
SOURCE: http://www.cygwin.com/faq.html#faq.using.fixing-fork-failures
and the rebase README file.
To add on to other answers here, we ran into the same issue but could not run the rebase command from the ash or dash shell. However, when launching the command from the Windows cmd shell, the following worked.
cmd /c "C:\cygwin64\bin\ash.exe /usr/rebaseall -v"
-v is to get verbose output
I found another information here :
http://cygwin.com/ml/cygwin/2014-02/msg00531.html
You have to delete the database at
/etc/rebase.db* and do in a "ash" windows :
peflags * -d 1
rebaseall
It works for me on 2 servers.
I solved this problem by restarting my computer. Probably installed a driver update and kept using sleep instead of shutting down.
Experienced the same issue when loading Cygwin with cygiconv-2.dll forking and not loading successfully in the Cygwin terminal, but after turning off my AntiVirus (it was specifically Ad-aware), the issue resolved, and Cygwin worked properly.
In case you are using babun's Cygwin, after rebaseall, try launching Cygwin by executing .babun\cygwin\cygwin.bat in a Windows command prompt or Windows explorer.
This works for me (while launching babun's default console - mintty results in fork error).
I had the error on win10 and i was trying to rebase to c: before install.
then i saw that the installer was installing it instead to c:/Users/myuser
so i was coping all files from c:/Users/myuser to c:.badun
and then restart plus open badun.bat
not shure if this was wise its now duplicated XD... but then it worked again.
Rebaseing didn't help in my case. In addition to what other people suggested, I noticed that reducing the length of PATH environment variable fixed the issue for me (and for other people as well as can be seen from this answer).
This issue is intermittent in nature & I found this issue when there is network is too slow to connect to remote machine on AWS.... I have Shell script that runs through Gitbash shell & it connects to AWS EC2 instance with ssh..... Most of the time, it ran correctly but 2 out 100 times it get into this issue bash: fork: retry: Resource temporarily unavailable .... Killing the MSYS2 terminal from task manager helps to overcome with this issue....
Negative side is you need to run the scripts from the beginning...
I had the same issue on Windows 10 and the mobaxterm app (which uses cygwin) and I tried all of answers listed here however for me, the solution was to simply delete the "CryptoPro CSP" application.
I started facing this problem after upgrading to windows 10. As of now I do not see that any of the above method working.
What I am noticing is that if you start cygwin with admin right (right click and say "run as admin") then it works fine.
Or you open cmd as administrator and then launch cygwin from there, then also it runs fine.
Just reinstall cygwin and select TCL and activate EXPECT
I have an opengl implementation that runs fine on my desktop.
But even though i have it set up the exact same way on my laptop i get an "out of memory" error when i try to run it.
it is strange because on my desktop the application only takes up 200mb ram and i have 2gb available on the laptop
any ideas what might cause this?
btw im running the application through Visual Studio 2012 Ultimate and using the glut setup suggested in the first answer of this post: How to fix this Error: #include <gl/glut.h> "Cannot open source file gl/glut.h"
Check the encoding of your file
(http://lists.apple.com/archives/mac-opengl/2006/Jun/msg00070.html)
Ensure you're using the same runtime environment
(have you installed the same glut.dll on your laptop?)
Finally, I have a question:
What do you mean "running the application through Visual Studio"? Do you hit Ctrl+F5?
I found the solution, it is rather dumb.
I had set up "main" as "Entry Point" in "Project Preferences -> Linker -> Advanced" because it was necessary on my desktop.
I removed this so i had a blank "Entry Point" and my code runs fine ^^
posting in case someone needs this info
This happened the first time I've tried debugging with Eclipse juno C++:
Error in final launch sequence
Failed to execute MI command:
-exec-run
Error message from debugger back end:
Error creating process <full path>... (error 193)
Running the program using "Run" instead of "Debug" works just fine but when I try debug I get this. I googled about a bit and found somewhere that I should remove any spaces from the directory; I did that but it still isn't working.
The version of eclipse I'm running is:
Eclipse IDE for C/C++ Developers
Version: Juno Service Release 1
Build id: 20120920-0800
Edit:
Problem is sorted! It was because I had forgot the space in my user account name. Because I couldn't be bothered to go through a load of mess changing the folder name in users I just moved my workspace folders straight to my C Drive so the path that it follows is now: C:\eclipse\WorkspaceC++
Thank you very much to john in the comments :)
From OP edit: Problem is sorted!
It was because I had forgot the space in my user account name.
Because I couldn't be bothered to go through a load of mess changing the folder name in users I just moved my workspace folders straight to my C Drive so the path that it follows is now: C:\eclipse\WorkspaceC++
I'm trying to compile my C++ program, but when I press the "Build" button, it displays the following error message:
c:/gnat/2010/bin/../libexec/gcc/i686-pc-mingw32/4.3.6/ld.exe:
cannot open output file a.exe: Invalid
argument collect2: ld returned 1 exit
status
This is not the first time it has done this. It seems to do this most when I have been editing the same project a lot and building it often, almost as if something has been flooded, or overloaded, or something.
I had fixed it before, I believe, by restarting my PC, but I can't afford to keep restarting my PC every time this occurs.
I thought this was just a one-time problem, but it has continued to happen and so I thought I'd look for more help on this.
I found another SO question that I thought had the same error message/problem as I had. However, when I tried the solutions listed on afore-linked question, nothing helped.
Has anyone else had this issue? Or does anyone know how I can fix this issue (besides restarting my computer every time)?
I am developing in jGrasp also, if that helps any.
EDIT: I just wanted to add that I thought it might be that my previous executable was still running in the background, but even if I close my IDE, it still won't let me delete the executable, because it says it is still running.
I checked my process explorer to see if the a.exe was still running, but there's absolutely nothing in my processes that has to do with jGrasp or a.exe
I guess your executable is still running. It's the only reason I think about... I guess the best is to check on your task manager (process Explorer is your friend ;)).
In Visual Studio Code, go to Settings -> Search for "clear previous" in the search bar and check on the box named "clear previous output". :)
It is happening because your previous output is already running in the background. And VS Code offers a feature to close that on every run.
EDIT: it's nothing to do with collect2.exe.
Do you get any other error text, like for example 'permission denied errors' etc.
http://max.berger.name/howto/cdt/ar01s05.jsp
It is beacause the .exe is still running. If you're on Windows use the command line del -f a.exe and if you're on linux use rm -rf ./a.out
I have the same problem, was worried for hours. I disabled my avg antivirus and it worked.