I want to build a C++ code but it errors. When I check the error message it's related with .NET. I have C# extensions but this isn't C# and I want to change this to g++ for C++ projects. I have g++ installed and added to path however I don't know how can I configure it to build with that for C++ codes.
Edit: I marked the answer as a solution but I also found an easier way for me:
https://code.visualstudio.com/docs/cpp/config-msvc
cl.exe basically.
One option (probably not the one you want to) is to build it from integrated terminal.
You can download c/c++ extension along with the cmake tools extension to have buttons for build/run configuration.
SO!
Let's say I have a number of settings (GCC compiler 9.3.0 built from source, as the distribution I have to use has a very old one, along with environment setup) for a new Kit in QtCreator.
I have managed to setup an environment for compilation and execution of compiled binaries, and made a script to make it work (like qmake -nocache -recursive/make/sudo make install, direct execution of g++, and other stuff).
One thing that script can't do at the moment, is that it cannot create a kit for QtCreator with new compilers and environment being set as required, so after running a script, its user has to go through setting it up himself through GUI, which is bad, because this can cause misconfiguration.
This thing I'm trying to create is going to be used by around ~200 people in my company, so leaving readme.txt with instructions just doesn't go well enough for me - I don't want running around fixing missing "{" and "}" in Environment description in created Kits, and other stuff.
Are there ways to create Kits for QtCreator automatically from command line? Maybe, there's some files to edit?
I've looked into this one a few years back (I wanted to do something similar for registering Buildroot toolchains automatically in QtCreator), and I was unable to find an off the shelf solution. So i think there are 2 ways to implement this:
a) Implementing a command line utility the manipulate the ~/.config/QtProject/qtcreator/{toolchains,profiles}.xml files. Maybe by (re)using the existing C++ implementation within QtCreator, or just re-implement it ie. in Python. Back than I didn't start to work on this as there was no real business need.
b) Switching to qbs, as qbs has support for setting up toolchains from the command line ( see: https://doc.qt.io/qbs/cli-setup-toolchains.html)
If you decide to go with solution a), please let me know and maybe we can partner up to implement it.
Check out the command line sdktool bundled with QtCreator:
The SDK tool can be used to set up Qt versions, tool chains, devices
and kits in Qt Creator.
There still is a lot of knowledge about Qt Creator internals required
to use this tool!
I haven't tried it yet, but I did find the executable under Tools/QtCreator/libexec/qtcreator subdirectory of the Qt Creator installation directory. ./sdktool --help works for me under Linux.
I have a project which I created in Eclipse c++. The project invokes a function that does a lot of loops (Thousands) to calculate the result.
When I run it in Eclipse it takes 1 minute (~70 seconds).
I wanted to add a GUI to the project so I opened a WinForm (Win32) project in VisualStudio2010 and moved all files of the project from the eclipse directory to the new directory (created for VS2010).
Now, when I run the form, the function takes 4-5 minutes. I tried to cancel the progress bar but it wasn't the problem, so I understood that long time is not because of the GUI.
I think the problem is in the compilation in VS2010. I tried to change some Optimizations properties, but the project couldn't be compiled...
How can I reduce the run time?
Thanks!
Basically you answered your own question:
I think the problem is in the compilation in VS2010. I tried to change
some Optimizations properties, but the project couldn't be compiled...
however, it's hard to answer it, since there is a lot of optimization options in both of compilers, it's hard to tell what option makes it much faster/slower. It's also possible (and most probably is) that MS compiler just cant produce exactly the same or similar code to that of Eclipse's compiler.
Your options is to "play" with optimization switches of the VS compiler and see if it helps. You can try to compare it's options to ones of the Eclipse to find differences, but most likely they will be just too different.
As #Zuljin correctly mentioned also check you selected Win32 project, not CLR (Windows Forms) application. If you are using CLR project, then it's natural it will possibly run slower than Native program type.
My bet would be the debugger in VS2010
Build with your optimized settings but then start the generated file from the explorer, not from Visual Studio. You can also deactivate the debugger attachment in the project settings.
See if the run time is any different.
I'm a hobbyist developer and have a background with Java (IDE of choice was Eclipse). I'm using Visual Studio Express 2010 and wanting to learn C++.
Few questions:
I create a "HelloWorld" in C++ and compiles/runs in VS/Windows. When I try to compile it under Linux/GCC, it obviously throws tons of errors. Default windows console project includes windows specific files; but if just create an "Empty Project" it throws tons of linker/build errors. What's the best practices here to keep my code portable?
Why is it creating 47 files for 8 lines of code?
How do you format code? You can do Edit->Format Selection, but the hotkeys don't work?
How do I output to VS's 'Output' Window? ( like eclipse does when you run a console java app )
It keeps reverting my "Project Location" to my "home directory" every time I restart. How do you change it? Is it a bug? Because it's Express edition?
Is there a way to keep it from switching to Debug view when it runs?
I create a "HelloWorld" in C++ and
compiles/runs in VS/Windows. When I
try to compile it under Linux/GCC, it
obviously throws tons of errors.
Default windows console project
includes windows specific files; but
if just create an "Empty Project" it
throws tons of linker/build errors.
What's the best practices here to keep
my code portable?
For portable code, avoid VS wizards entirely. Use Make/NMake if you're starting with rocks and sticks, or the portable build system of your preference (Ant, CMake, etc.) Some of these will spit out a VS solution/project file for you to use.
Why is it creating 47 files for 8
lines of code?
Wizards are magical like that.
How do you format code? You can do
Edit->Format Selection, but the
hotkeys don't work?
Ctrl-K Ctrl-F (under Edit, Advanced)
How do I output to VS's 'Output'
Window? ( like eclipse does when you
run a console java app )
Lookup OutputDebugString() for the debug window. Output window should get all cout/cerr output.
It keeps reverting my "Project
Location" to my "home directory" every
time I restart. How do you change it?
Is it a bug? Because it's Express
edition?
Probably hidden in options somewhere - don't know that one, sorry.
Is there a way to keep it from
switching to Debug view when it runs?
Launch using Ctrl+F5 to run without the debugger attached.
Have fun!
I create a "HelloWorld" in C++ and compiles/runs in VS/Windows. When I try to compile it under Linux/GCC, it obviously throws tons of errors. Default windows console project includes windows specific files; but if just create an "Empty Project" it throws tons of linker/build errors. What's the best practices here to keep my code portable?
It's fairly difficult to keep your code truly portable if you're writing Windows applications. Standard C++ will obviously work on either platform, but Linux can't run Windows applications, and vice versa. Remember that console applications are also considered Windows applications. They're not any more "pure" just because they are text-based, rather than graphical. Windows applications have their own entry point, different from the standard main function found in ANSI C++ (technically, main is still there, but it's hidden and called internally by the Windows libraries).
The best thing to do is not to link to any of the Windows headers. Unfortunately, you won't be very satisfied with the results. About all that you'll be able to generate is library code. You can't get a UI on the screen unless you use the Windows functions to do it.
An "Empty Project" is just what it says—empty. I assume the build errors are because you're trying to call functions that aren't defined anywhere. You'll find that you need to include windows.h to get off the ground, which instantly makes your code non-portable.
Why is it creating 47 files for 8 lines of code?
This is obviously an exaggeration; none of the wizards produce anywhere near that many code files. Especially not the "Empty Project", which doesn't create any at all.
A Win32 console application includes the following 5 files:
stdafx.h and stdafx.cpp — these files are used to enable "precompiled headers", meaning that Visual Studio will compile all of your headers once, and only recompile them when they change, rather than recompiling them each time you build the project. This used to provide enormous speed boosts, and still does on large projects. You probably don't need or care about this for small projects, but it's not a bad idea to get familiar with their usage if you're going to be developing in Visual Studio.
A targetver.h file, whose only purpose is to specify the earliest version of Windows that you want your application to run on. This is necessary because later versions of Windows add additional functionality that wasn't available in previous versions. Your app won't run if you link to functions or libraries that don't exist. Set this up once and then forget about it.
A <projectname>.cpp file, which is the implementation code for your application. This is pretty standard stuff—it includes the _tmain function, which is the entry point for a console app.
A ReadMe.txt file, which you can immediately delete. It contains some introductory information and describes the files that have been added to your project. (Yes, reading this yourself could have answered this question.)
A Win32 application would have a few more files, but most of the same ones as well. In particular, you'll see a resource file (with the extension .rc) that contains the icons, dialogs, bitmaps, cursors, etc. used in your program.
If you don't like this structure, you can either forgo the use of a wizard, or modify it yourself. There's nothing set in stone about it.
How do you format code? You can do Edit->Format Selection, but the hotkeys don't work?
Formatting code works fine. I'm not sure why people are telling you that Visual Studio doesn't support this, or that you'll need a third-party plug-in. There's no "Format Document" command as there is in C#, but the "Format Selection" command works just fine. The only difference is, you have to select something in order for it to be enabled.
The default keyboard extension for that command is CtrlK, Ctrl+F. It also works fine, right out of the box. My typical workflow is to hit Ctrl+A first to select all.
How do I output to VS's 'Output' Window? ( like eclipse does when you run a console java app )
I don't know what Eclipse does, nor do I know anything about Java. What do you want this to do? When and what things do you want to get written to the "Output" window? A console application will run in a console window, not in the "Output" window. That's not what it's for.
It's intended for debugging purposes. The OutputDebugString function is one way of utilizing it. The output of the standard cerr keyword should be automatically redirected to the "Output" window.
It keeps reverting my "Project Location" to my "home directory" every time I restart. How do you change it? Is it a bug? Because it's Express edition?
This isn't a bug, it's a feature. Visual Studio is designed for working with projects and solutions, not one-off code files. So by default, it prompts you to specify a project folder, a location to store your files. And what better place for the default location than your home folder?
If you don't like that location, you can change it. Under the "Tools" menu, select "Options". Expand the "Projects and Solutions" category, and click the "General" item. Then, change the path of the "Projects location" (the top textbox). Couldn't get much simpler than that.
Is there a way to keep it from switching to Debug view when it runs?
I frankly don't understand how this question makes any sense at all. When you run an application with the debugger attached, Visual Studio switches to a different window layout specifically optimized for debugging. I just answered a similar question. The upshot is that there's no way of telling Visual Studio to use the same window layout for both design and debug view, but I also can't imagine why you'd want to, either. Different things are useful, depending on what you're currently doing.
The two window layouts are customizable, and your changes are remembered. I've customized mine heavily from the defaults; it's very likely that your tastes vary as well. There are lots of great features, like the "Locals" window, which shows a listing of all the values of the local variables in scope at the point where you break into your program's execution.
Also remember that the default "Debug" and "Release" build configurations have nothing to do with whether or not Visual Studio automatically attaches the debugger to your application's process. If you want to start your app without the debugger attached, select "Start without Debugging" from the Debug menu, or press Ctrl+F5. There are lots of side effects to this though, and it's probably not what you wanted. Without the debugger attached, you lose most of what Visual Studio provides to you as an IDE. You might as well just run the app from Windows Explorer without even launching VS.
Finally, if you prefer Eclipse (or at least are already accustomed to its nuances and prefer not to learn Visual Studio's), you can still use it for C++ development. Download it here.
If you're just wanting to learn C++ and you don't necessarily care about the platform, I would probably avoid using Visual Studio to start with. Visual Studio provides some functionality for managing projects and builds, but honestly, I think you're better off learning how to manage code files and use the compiler on the command line first, then working up from there.
If you're on Windows, I'd recommend installing Cygwin and getting the GNU compiler tools through the Cygwin setup utility (gcc or g++).
This is a bit of an opinionated answer, but my experience with C++ on Windows leads me to believe that you'd be better served trying to learn C++ from more of a unix-like angle. Windows C++ adds a whole layer of crap that will just confuse you when you're getting started.
I’m porting a C++ sdk from Windows to Mac OSX 10.5. I have a problem in Xcode where my breakpoints in certain files will only be hit if I set them while debugging. If I stop debugging and then restart, the breakpoints no longer get hit. If I add them while not debugging, they don't get hit. This is only in certain files and my breakpoints are always dark blue. i.e. I can’t tell the difference between a breakpoint that will get hit and one that won’t.
Specifically, my sdk is made up of various dynamic libraries. These are built using Perforce jam, which calls the various compile and link executables depending on my OS and compiler version (such as Visual Studio’s cl.exe and link.exe). I have a simple (unit testing) command line application that links to these dynamic libraries and calls code in them. This application on Windows is a Visual Studio project, in which I set breakpoints on library code and expect them to be hit.
I’ve created the same C++ command line utility application in Xcode 3.1.2 that links to the sdk dylibs and calls code in them. Some of the breakpoints work fine. I can set breakpoints in code that’s called from the troublesome code, and step out to the troublesome code, which I can then step through fine. The troublesome code is compiled into the same dylib as code that works fine. It’s also long and complicated enough not to be a candidate for inlining.
I’ve tried the following:
Turn Load symbols lazily off.
Compile with both gcc 4.0 and gcc 4.2.
Do a full clean and shutdown.
Delete the user-specific files of the xcodeproj package.
Rename the files so they can’t clash with system files.
Clear everything out of the Breakpoints window.
Create a new Xcode project.
My application is compiled in debug with DWARF format and my libraries are built with the –g flag (along with –v, –arch i386 and –fvisibility-inlines-hidden).
Help would be much appreciated. Thanks.
Update: sorry for not updating this, my Mac port project was postponed. I never resolved this, but discovered that it actually only occurs in constructor bodies. I'll revisit this as and when I hit the problem again.
Have you tried these?
Why aren't my breakpoints working?
Not really an answer: You should make a bug report in the official Apple bugtracker. The chances are high that you get an answer sooner or later there - or perhaps it is really a bug.