I have a simple CSV data set such as this.
ID,MainCategory,SubCategory,Type,Value
1,E,E1,Demo,5
2,N,N3,Install,2
3,E,E1,Demo,4
4,E,E2,Install,7
5,D,D1,Install,3
6,S,S2,PM,4
7,N,N2,Install,7
8,N,N2,Demo,1
9,E,E2,Demo,2
10,D,D2,Install,6
11,D,D3,PM,4
12,S,S1,PM,8
13,N,N1,Install,5
14,S,S3,Install,8
15,S,S1,Demo,9
16,E,E3,Demo,5
17,N,N2,Install,3
18,E,E2,PM,6
19,D,D2,PM,6
20,N,N3,Demo,6
21,S,S2,Demo,7
22,E,E3,Install,2
23,S,S1,Install,4
24,S,S2,PM,8
25,D,D1,Install,5
In my Power BI Desktop, I'd like to load this into a table, and conditionally format the Value column based on whether the value in each row is greater than or less than the average for the currently selected data set.
For instance, the average of Value considering the entire table is 5.08, so if there are no filters applied (as in, all my slicers are set to select nothing), I'd like all rows whose Value is 6 or more to be background colored in one color, and the others in another color. For this, I created two measures like so:
AvgOfVal = DIVIDE( SUM(G2G[Value]), COUNTA(G2G[ID]) )
BGColor = IF(SUM(G2G[Value]) > [AvgOfVal], "Light Pink", "Light Blue")
Then I tried to apply the BGColor measure for conditionally formatting the background, but this doesn't work as expected, and instead produces the result below.
I realize that this is due to the fact that the measure is calculated per row, so when conditional formatting is applied, as seen in the AvgOfVal column in the table, it calculates average per row instead of for the entire data set. How can I calculate a measure that takes into account the entire data set (considering slicers), and do the conditional formatting as I need.
Please keep in mind that if a user were to select a slicer filter (say, MainCategory = D), then I want the conditional formatting to reflect this. So in this case, given that AvgOfVal = 4.80 for MainCategory = D entries, I'd like all rows whose Value >= 5 to be in one color, and others in another color.
I realize that this is due to the fact that the measure is calculated per row
Yes. The key is understanding how that happens. When the measure is calculated a "context transition" happens and the current row is added to the filter context.
So what you want is a calculation that removes the row filter that was added in the context transition. So you need ALLSELECTED(), which does precisely that. eg
AvgOvVAl = CALCULATE( AVERAGE('data'[Value]), ALLSELECTED() )
Removing the "innermost" filter which in this case is the filter on the row, but leaving all other filters, ie filters added on the report, page, visual, or filters coming from interactions with other visuals like slicers.
I have line and clustered column chart (shown on "Graph" image) and I want to add a visual like drawn on "Graph" image
Clustered Columns : Planned Labor Data and Actual Labor Data
Lines : Cumulative Planned Labor data and Cumulative Labor Data
I keep data for both planned (P_Planned_Labor) and actual (Z_Labor) in 2 column table (date and data). Also I have a Date table (Z_Tarih) and it has only dates which has relation with planned and actual tables.
Dax Measures:
[Toplam Bugdeted] = Sum of Planned Bugdet
Columns;
Labor_Earned % İlerleme = DIVIDE(sum(Z_Labor[Değer]),[Toplam Budgeted],0) "percentage of actual labor of this week)
Labor_Plan % İlerleme = DIVIDE(SUM(P_Planned_Labor[Değer]),[Toplam Budgeted],0) "percentage of planned labor of this week)
Lines;
Labor_Earned Küm. % İlerleme = DIVIDE(CALCULATE(SUM(Z_Labor[Değer]),FILTER(ALL(Z_Tarih),Z_Tarih[Tarih]<=MAX(Z_Labor[Tarih]))),[Toplam Budgeted],0) "percentage of all actual from begining"
Labor_Plan Küm. % İlerleme = DIVIDE(CALCULATE(SUM(P_Planned_Labor[Değer]),FILTER(ALL(Z_Tarih),Z_Tarih[Tarih]<=MAX(Z_Tarih[Tarih]))),[Toplam Budgeted],0) "percentage of all planned from begining"
the chart i used doesnt allow (or i couldn't figure it out) to add visual which show difference value among lines.
Is there any chart that allow me to do that ?
or what measure should i add ?
Graph
Data
I think you simply can't achieve a chart like that (in which you plot the difference in that way), you will have to find a different way to show it.
for the difference itself, just create a measure like AB difference = [Measure A] - [Measure B], let's call it "difference"
Idea 1
you can then show the "difference" in the tooltip section, it will be visible only on hover (and you can put there as many differences as you want, one for "earned" and one for "planned"
Idea 2
Use the "Line and Stacked Column Chart", split the current chart in 2
In the "column values" put "labor" and "difference"
in the "line values" put the total value
This will allow seeing the current value and the difference like you asked BUT you won't be able to have multiple "categories" of measure in the same chart, as all the values will be stacked. therefore you will need to have one chart for "labor earned" and one for "labor planned".
You might want to put the 2 chart side by side (or one below the other) and maybe with a somehow fixed scale in order to make the comparison between the two easier
The Films table looks like this
There is a ComfortBreaks table looking like image
In the Films table I need to create a calculated column called NumberBreaks which shows for each film the number of breaks needed. To do this I have to pick out the value of the Breaks column where:
The value of the lower limit in the ComfortBreaks table is less than or equal to this film's running time in minutes
and
The value of the upper limit in the ComfortBreaks table is greater than this film's running time in minutes.
the result should look like the image below
There cannot be a relationship between the two tables. so this has to be done without creating relationship between them.
I tried lookup function but it showed error:A table of multiple values was supplied where a single value was expected.
You can use this below code for your custom column. Considering
number_of_breaks =
VAR current_row_run_time_minutes = Films[RunTimeMinutes]
RETURN
MINX (
FILTER(
ComfortBreaks,
ComfortBreaks[LowerLimit] <= current_row_run_time_minutes
&& ComfortBreaks[UperLimit] > MonthNumber
),
ComfortBreaks[Breaks]
)
You can perform your further average calculation on the new custom column now.
I'm trying to obtain the MAX of a particular column in a Power BI Report and place this as a new Measure within each ROW of the same dataset. Please see the example below.
Is this possible in DAX and via DirectQuery/LiveConnection? The report is pointing to a tabular model but due to outside factors the measure must be created in the report.
Thanks
You can accomplish this a few ways. Essentially, you need override the filter context so that the MAX function isn't just running over whatever slice you're showing in the visual. Using CALCULATE or the iterator function MAXX, set the wrap the table in the ALL() function to override the context and calculate max over all rows.
= CALCULATE(MAX([Calendar`Year]), ALL('Smithfield_Fiscal_Calendar'))
or
= MAXX(ALL('Smithfield_Fiscal_Calendar'), [Calendar`Year])
To get the breakout by date, you'll need to include a Date table in your model. PowerBI makes this possible with a few different DAX options. As an example, go to your Model tab, click 'New Table' and put in the following expression:
MyCalendar = CALENDAR(DATE(2019,1,1), DATE (2019,1,10))
This is a little trivial -- you'd want to use a useful range of dates but this one matches your example above. Next, add a column to [MyCalendar]
CalendarMonthYear = month([date]) & "-" & year([date])
Go to your budget table and add a similar field
BudgetMonthYear = month([date]) & "-" & year([date])
Go into your Model view and create a relationship between CalendarMonthYear and BudgetMonthYear. This will associate every date in the date table with the particular budget row from your budget table.
Hope it helps.
I am using Power BI to bring together data from several systems and display a dash board with data from all of the systems.
The dashboard has a couple of filters which are then used to display the data relating to one object across all systems.
When the dashboard is first loaded and none of the filter have been selected, the data cards display information from all rows in the table.
Is there a way to make a data card only display one row of data?
or
Be blank if there are more than one row of data?
There's no direct way to look at the number of rows in the visual, count them, and do something different if there's more than 1.
That said, there are a few things you can do.
HASONEFILTER
If you have a specific column in your table that, when selected, filters your results to a single row, then you can check if there's a filter on that column using HASONEFILTER. (If you have multiple alternative columns,any of which filter to a single row, that's ok too.)
You could then create a measure for each column that tests HASONEFILTER. If true, return the MAX of the column. (The reason for MAX is because measures always have to aggregate, but the MAX of a 1-row column will be the same as the value in that column.) If false, return either BLANK() or an empty string, depending on your preference.
E.g.
ColumnAMeasure = IF(HASONEFILTER(Sheet1[Slicer Column]),MAX(Sheet1[COLUMN A]), "")
ColumnBMeasure = IF(HASONEFILTER(Sheet1[Slicer Column]),MAX(Sheet1[COLUMN B]), "")
where Sheet1 is the name of the table and "Slicer Column" is the name of the column being used as a slicer
HASONEVALUE
If you have multiple columns that could be used as filters in combination (meaning that having a filter applied on "Slicer Column" doesn't guarantee only 1 row in the table), then rather than testing HASONEFILTER, you can test HASONEVALUE.
ColumnAMeasure = IF(HASONEVALUE(Sheet1[COLUMN A]),MAX(Sheet1[COLUMN A]), "")
ColumnBMeasure = IF(HASONEVALUE(Sheet1[Column B]),MAX(Sheet1[COLUMN B]), "")
Notice that HASONEVALUE tests the current column you're trying to display, rather than a slicer column like HASONEFILTER.
One side-effect of HASONEVALUE is that, if you're filtered to 3 rows, but all 3 rows have the same value for column A, then column A will display that value. (Whereas with HASONEFILTER, column A would stay blank until you're filtered to one thing.)
Low Tech
Both answers above depend on a measure existing for every column you want to display, so that you can test whether to display a blank row or not. That could become a pain if you have dozens of columns.
A lower-tech alternative is to add in an additional row with blanks for each column and then sort your table so that that row always appears first. (And shorten your visual so only the top row is visible.) Technically the other rows would be underneath and there'd be a scrollbar, but at least the initial display would be blank rather than showing a random row.
Hopefully something here has helped. Other people might have better solutions too. More information:
HASONEFILTER documentation: https://msdn.microsoft.com/en-us/library/gg492135.aspx
HASONEVALUE documentation: https://msdn.microsoft.com/en-us/library/gg492190.aspx