i have built an QT GUI app using Visual Studio 2017 with Qt VS Tools extension and QT version 5.6 (the one provided by QT precompiled), using Qled widget plugin.
With this Default Dynamic Qt version, the app runs fine with the widget and i have no problems.
But now, i want to build the same app, but static, for use without dependencies.
So, i built QT 5.6 from source with -static parameter, to be more exact i follow this blog's guide. Here problems started to show up:
I tried to rebuild the widget plugin using the static qmake, but i got this error: "Project ERROR: Unknown module(s) in QT: designer"
I tried to use the plugin compiled by the dynamic qmake, and surprisingly, it built with success but the GUI app didn't open at all.
Its worth mentioning that i can use and build a simple default application using a qmake static build.
I think i need to add the Qt Designer Module, but i don't know how to do this, i even tried to rebuild qmake without the "-nomake tools" paramter, but got the same error building the plugin.
just don't build the plugin, you don't need it. Just add the qrc file, and the actual widget *.cpp and *.h file into your project
fix the linkage, delete the QDESIGNER_WIDGET_EXPORT in the *.h file inside your project
This comment managed to solved my problem, thanks to #PeterT
Related
I want to embed some UI written using Qt and QML via QMacNativeWidget.
And I want to debug QML using Qt Creator, cause I can't debug QML with XCode. Do you know if it's possible?
You can debug Qt/QML in Xcode since it's essentially just a regular C/C++ project. The only thing you need is a proper Xcode project (.xcodeproj).
You could use CMake for project configuration/generation instead of relying on QtCreator's .pro format. With CMake you could switch between IDEs (project generators is the better term) on demand and try things out when it gets OS specific.
If that's not an option (there might be several reasons), you still can generate an Xcode project from an existing .pro solution via qmake in the command line:
qmake -spec macx-xcode project.pro
This can be found in the Qt for macOS section of the docs.
I have received a demo Qt project for a product.
I am trying to build the project and run it.
I am getting such a kind of error in Qt Designer when I try to build the project.
It says ui_FOO.h does not exist.
I see that FOO.ui (the qt designer form exists) but source and header files for it do not exist. And thats why i am getting the error.
What should I do to be able to build and run my project?
Add the following line to the pro file to get uic generate the C++ header from the ui file:
FORMS = FOO.ui
and build your project again.
You can find more information from Using a Designer UI File in Your Application.
Oh I got it.
This is a qt4 project as it is written in manual.
I went under tools->options->build&run->qtversions and added qmake-qt4
Then under the kit manually added a kit which uses the qtversion that i just specified.
Then under projects tile clicked on add kit and the kit appeared.
I removed the qt5 kit.
Now those ui_foo.h file is generated in its corresponding build path.
I am interested to import Itk-snap source code in Qt5.4. Based on their help I could built the executable itksnap in my system using cmake(3.4.1). Then, I have imported the Cmakelist.txt in Qt creator and pressed "run camke". It is configured successfully, but I cannot see the project file ( no main.cpp or any file in left panel)! , cannot build it because it does not loaded in Qt creator.
What do I do wrong? How can I have itksnap in my QT creator.
I am using OSX, and unix generator for camke.
As I can understand you are trying to build cmake project using QtCreator as an IDE, if so have a look here http://doc.qt.io/qtcreator/creator-project-cmake.html
Finally, I could find out what was wrong. For whoever is interested and have same problem like me, I recommend to do : first to build binary of itk-snap source file using Cmake-Gui and build based on their help to the different folder. After you are sure that you can make the binary file, goes to the Qt-Creator, change the Kit and other setting if its not correct, then open Cmakelist.txt from source of itk-snap. It shows a windows to run the cmake inside the QT-creator. Go back to your Cmake-Gui and from Tools >> show my changes menu, copy the argument and past to the argument textBox in QT. In my case variables are
-DVTK_REQUIRED_OBJCXX_FLAGS:STRING="" -DSNAP_USE_GPU:BOOL="1" -DVTK_DIR:PATH="/Users/../itkSnap3/vtk/build" -DITK_DIR:PATH="/Users/../itkSnap3/itk/build" -DCMAKE_PREFIX_PATH:PATH="/usr/local/Cellar/qt5/5.5.1_2/lib/cmake"
Good luck
So I have a simple app that uses QML for my graphical interface and c++ code for some of the logic. I was looking for a method to compile the QML into c++ code and link it into my binary and found this page over at the Qt home site:
http://doc.qt.io/QtQuickCompiler/
Basically it says use the resource system for all of my QML graphical interface files and add the QML compiler flag to my qmake config line in my .pro file and everything should be good to go.
As far as I know everything compiles fine, but when I use the the Qt windeployqt.exe tool to get all of the dependency files and test it on a clean system, I get a small white screen as if my QML files were not loaded properly.
I have one c++ reference to my main QML file using "qrc:/mainqml.qml" and that's it.
Any idea what I am doing wrong?
You're using the open source version of Qt. It didn't come with the Qt Quick compiler until Qt 5.11 where it is included - and after a rework, too. So it performs better than precompiled QML did in Qt 5.10 and before.
I get a small white screen as if my QML files were not loaded properly.
... thus you need to deploy these files with the application, otherwise it won't work.
add the QML compiler flag to my qmake config
That flag was a no-op on an open source Qt build until Qt 5.11.
Qt Quick Compiler only shipped with Qt Commercial License, but you can still compile your QML files into qrc file. Starting a Qt Quick application project from Qt Creator does exactly this.
Deploying QML application with windeployqt require additional flag --qmldir, e.g.
windeployqt --(release or debug) --qmldir %PATH_TO_YOUR_QML_FILES% %YOUR_APPLICATION%.exe
It will parse your qml files and deploy all qml imports you used.
I recently started using Qt library and I've got a question.
Is this possible to use Qt with Visual Studio without special add-in?
I want to just design the UI using qt designer and do the rest in VS Express.
How do I do that?
Thanks.
Yes you can, if you would prefer not to use the QtVSAddin it is very easy to use Qt with VS Express without the VS add-in and without having to do any of the uic or moc steps manually. Let QMake (installed with Qt but not part of the QtVSAddin) create your VS project file and do all your project setup in a qmake project file. Whenever you make a change like adding/removing a form or source, modify the qmake project file and regenerate the VS project. Don't modify the VS project file at all, treat it only as a temporary item. QMake will add the rules automatically to the VS project file to rerun uic and moc, you don't need to do anything if you're just modifying source code or forms.
For configuration management purposes I find this a much cleaner approach to use this workflow as you treat the VS project file as only a temporary item (they tend to diff badly and are a pain to maintain in version control).
A couple snippets to help you out:
In your qmake project file ensure you add the following line into it so that VS project files are generated when running on Windows (qmake defaults to generating a makefile).
your_qmake_proj.pro
win32: TEMPLATE = vcapp
Additionally, it's convenient to have a batch file to rerun qmake so you don't have to bring up a command prompt and set environment up (or change directory to your project in a command prompt that already has the environment setup). If you haven't set the various Qt environment variables with Windows (or prefer not to) make sure to add them to your batch file.
makevcproj.bat
set QTDIR=C:\Qt\x.y.z
set PATH=%PATH%;%QTDIR%\bin
set QMAKESPEC=win32-msvcXXXX
qmake your_qmake_proj.pro
pause
CMake is also an answer and it does work with express versions of Visual Studio. I mean if you use the Qt support in CMake you can develop Qt projects in Visual Studio (like I have done for years) without the Qt Addon. I install the addon just for the debug expansion that comes in the same package.
It is certainly possible, but without the add-in you will need to UI and MOC the needed files either before you compile the rest within VS, or through pre-compile scripting.
Specifically:
uic generates the headers from .ui files.
and
moc generates the additional implementation files for classes that has Qt macros in it.
The add-in helps you call these smoothly on the required files before compiling the rest.
It's is possible if you create the UI in QtCreator and manually setup VS in a way that generate the UI and MOC files.
But it's too much work and you can use QtCreator which is an amazing light IDE.