I am trying to establish a LDAP connection (<cfldap>) from within a Docker image of Coldfusion 2021. It would be hard to post any relavent code here simply because it would expose our AD tree, however, the same code I am trying to run works just fine from an installed copy of CF2021 on a linux server.
The reason for using a Docker image (vs. install) in this instance, is an attempt to setup a local development (MACOS) environment. So far, everything seems to be working great with the exception of LDAP calls.
Note: I have successfully run a ldapsearch call from a bash shell within the container.
The error I'm getting:
An error has occurred while trying to execute query :Could not resolve
a valid ldap host
The Docker image repo I pulled from:
https://hub.docker.com/r/adobecoldfusion/coldfusion
Update: I've just noticed CF version differences between the server that isn't having the problems:
Linux Version: 2021,0,01,325996 (installed a few weeks ago non-Docker)
Local MACOS: 2021,0,02,328618 (Docker)
Update 2: We've installed a fresh ColdFusion 2021 Docker image on a Linux box directly connected to our network and we are still seeing this issue. This narrows the issue down to Adobe Cold Fusion 2021's interaction with Docker and it's ability to do <CFLDAP>.
Update 3: 10-13-2021 - It would appear the CF team is aware of this, has confirmed the bug and is looking into it.
Update 4: 11-12-2021 - This bug is related to the version of Java running within the Docker image. "Adobe CF support suggested updating to JAVA SE 11.0.13 (LTS) inside the docker container" which has worked when tested. Expect CF to solve the problem in future Docker CF2021 releases.
I'm deploying a docker image from Github to AWS elastic beanstalk using travis. That part goes OK, the actual deployment exits with 0 and there is a .zip file in the S3 bucket.
The issue is that, since this is my first time using AWS I created the app using the Sample Application since the code is deployed from Github, and after the deployment I get the health status as degraded (red exclamation sign) with this message:
ERROR
During an aborted deployment, some instances may have deployed the new application version. To ensure all instances are running the same version, re-deploy the appropriate application version.
If I go to Causes I find this:
Application deployment failed at 2020-05-01T16:01:58Z with exit status 1 and error: Engine execution has encountered an error.
Incorrect application version "travis-e55e05342a8cc16f3f28f8e184735667a9531ffa-1588311901" (deployment 4). Expected version "Sample Application" (deployment 1).
I even deleted the sample application and re-deployed the one that was uploaded and got that particular error. As you can see in the last message I've deployed this 3 times already, getting the same result.
Finally I downloaded the zip file from the S3 bucket and I found inside basically the src and public folders along with all the files in the root folder such as package.json, .gitignore all the docker files, etc.
EDIT
I created two separate repos in github to test this.
The first repo is a static page in a Docker container, quite simple. I create an environment in EB and start everything with the sample app. Then I push the changes to github, travis does it's thing and deploys the app to AWS. This works fine and the app's env is updated with no errors. This is the repo:
https://github.com/rhernandog/docler-static-page-aws
The second repo is a simple react app. Same procedure, create the environment in EB with the sample app. Push the code to github, travis does it's thing and deploys to AWS. This fails and I keep getting the same error:
Environment health has transitioned from Info to Degraded. Command failed on all
instances. Incorrect application version found on all instances. Expected version
"Sample Application" (deployment 1). Application update failed 1 second ago and
took 2 minutes.
This is the repo for the react app:
https://github.com/rhernandog/react-docker-awseb
In terms of Docker, everything works fine in my local machine.
EDIT 2
Based on #stefansundin suggestion I re-deployed the app to EB and check the logs. I ended looking at the full logs for more information and found this:
/var/log/cfn-hup.log
2020-05-14 17:07:42,605 [WARNING] Action for aws-eb-command-handler exited with 1, returning FAILURE
The only place where I found an error was in the engine log file:
/var/log/eb-engine.log
2020/05/14 17:07:42.514601 [INFO] Executing instruction: Docker Specific Build Application
2020/05/14 17:07:42.514605 [INFO] start build docker app
2020/05/14 17:07:42.514615 [INFO] fetch image name
2020/05/14 17:07:42.514639 [INFO] authenticate with ECR if the image is in an ECR repo
2020/05/14 17:07:42.514644 [INFO] pull docker image if update is not false in dockerrun.aws.json
2020/05/14 17:07:42.514657 [INFO] Running command /bin/sh -c docker pull node:12-alpine AS builder
2020/05/14 17:07:42.558923 [ERROR] "docker pull" requires exactly 1 argument.
So basically this is complaining about this in the dockerfile: FROM node:12-alpine AS builder. You can see the whole file in the repo: https://github.com/rhernandog/react-docker-awseb/blob/master/Dockerfile
The point is: Why this doesn't happen in my local machine? And how can I actually get the files from the build command and copy them to the nginx folder?
That is actually the only error I found in the log files.
I solved the issue here:
AWS Elastic Beanstalk Docker Does not support Multi-Stage Build
it is a stage-naming problem of multi-stage Dockerfile. Just use an Unamed one
I also got a similar error in my node app:
Incorrect application version "travis-e55e05342a8cc16f3f28f8e184735667a9531ffa-1588311901" (deployment 4). Expected version "Sample Application" (deployment 1)
What turned out to be an issue with my building and deployment scripts were corrected (debugged in Jenkins) the application successfully deploys in beanstalk with no error.
Turns out the issue was not with Beanstalk or app version but with the build mechanism. Something to look into when nothing else works :)
I had the same issue for java app in docker container.
I tried all the recommendations from this topic, links from this topic and nothing helped.
In the end, the following action helped:
Enable enhanced health panel https://docs.aws.amazon.com/elasticbeanstalk/latest/dg/health-enhanced-enable.html#health-enhanced-enable-console
Go to the extended panel of the desired environment
Select the instance that crashed due to this "version" issue and click reboot
Additionally:
In one of the cases, I had to delete all previous versions (section on the left panel) and push a new one and only after that make the above recommendations.
Also make sure you have sufficient rights to deploy (codepipeline/deployment)
AWS Docs say that
To solve this issue, start another deployment. You can redeploy a previous version that you know works, or configure your environment to ignore health checks during deployment and redeploy the new version to force the deployment to complete.
You can also identify and terminate the instances that are running the wrong application version. Elastic Beanstalk will launch instances with the correct version to replace any instances that you terminate. Use the EB CLI health command to identify instances that are running the wrong application version.
Can you try to delete the instances that runs your applications and start a fresh install?
Also, you can use CodePipeline to deploy your codes to Elastic Beanstalk, you can use your S3 folder for the source stage and skip the build process if your code is build on travis and deploy using the deploy stage to install your new app to your Elastic Beanstalk. There might be some misconfiguration while installing the new app to your environment.
I suggest you to terminate your instances and start new instances sorry if I got your question wrong.
I haven't used Docker on Elastic Beanstalk. When my Ruby on Elastic Beanstalk deployments fail, I find that I usually find the problem if I request the 100 last lines from the logs. If you navigate to "Logs" -> "Request Logs" -> "Last 100 Lines", that may help you.
If that fails, I SSH in to the instance and look in the logs in /var/log. Maybe docker ps and docker logs may help you.
While creating a new webserver environment on platform branch select "Docker running on 64bit Amazon Linux" it will work.
I installed the visual studio aws tookit for vs, created a dotnet core app, deployed, and after a few tries deployed it and reached from browser.
Now I'm trying to deploy an updated version of the app and I have problems: after a few test I see that now the problem is the creation of the task that gives me the error (in the aws console)
CannotPullContainerError: failed to register layer: expected integer
What does it means? how can I fix it? After I saw the app running seems to me I didn't change anything in the configuration files.
I have a ubuntu EC2 instance in AWS.
I already installed Java and Elasticsearch, and now i'm trying to install Kopf so i can manage my nodes using the web UI.
However, when i try to install it using:
bin/elasticsearch-plugin install lmenezes/elasticsearch-kopf
when i'm in the:
/usr/share/elasticsearch directory, i get the error:
ERROR: Unknown plugin lmenezes/elasticsearch-kopf
What am i doing wrong?
(my Elasticsearch version is 6.2.2)
Thanks!
https://github.com/lmenezes/elasticsearch-kopf
Kopf is no longer maintained. A replacement(cerebro) has been
developed and is currently maintained at
https://github.com/lmenezes/cerebro. At this point, cerebro should be
pretty much feature equivalent of kopf, with a few new features on
top.
I'm working on a project that I haven't touched in about 4 months. Before everything on the deploy was working fine, but now I'm getting an error when trying to deploy an update.
Failed to pull Docker image amazon/aws-eb-python:3.4.2-onbuild-3.5.1: Pulling repository amazon/aws-eb-python time="2016-01-17T01:40:45Z" level="fatal" msg="Could not reach any registry endpoint" . Check snapshot logs for details. Hook /opt/elasticbeanstalk/hooks/appdeploy/pre/03build.sh failed. For more detail, check /var/log/eb-activity.log using console or EB CLI.
In the eb-activity log, it further states [CMD-AppDeploy/AppDeployStage0/AppDeployPreHook/03build.sh] : Activity execution failed, because: Pulling repository amazon/aws-eb-python before repeating what was shown in the UI.
The original was using a Preconfigured Docker 64bit Debian jessie v1.3.1 running Python 3.4. I've tried upgrading to the latest, which is version 2.0.6, but it never completes (don't need to get into specifics of that error, separate issue and I'd like to stay on 1.3.1 if possible). I've also tried upgrading to the latest 1.x but it has the same result of upgrading to 2.0.6.
Any ideas, or anything else I should be looking for clues?
Docker Hub has deprecated pulls from Docker clients on 1.5 and earlier. Make sure that your docker client version is at least above 1.5. See https://blog.docker.com/2015/10/docker-hub-deprecation-1-5/ for more information.