Randomly (and infrequently), Visual Studio (2017) will abruptly refuse to run my C++ project. This will suddenly start happening in the middle of a session.
Visual Studio will still build the project and generate the executable, however, the following cryptic error message appears every time I want to run my program. No changes were made to the configuration or project and it strangely happens after an innocent build.
(It goes without saying but I tried extensively checking for solutions to this problem and no solution worked or was applicable)
Whether I add a new configuration setting or play with the existing settings (Release/Debug, x86/x64), nothing fixes it except performing a full repair (and that takes a very long time). Creating a new project didn't help either, but running it in VS 2015 is successful.
This happens approximately once a week, so I would greatly appreciate knowing how this error can be fixed (or at least avoided).
After some more experience with it, it appears just to be an issue with Visual Studio when builds are too large and executed too often (it happened to multiple computers). More specifically, it could come about as a result of using many templates and applying a large number of explicit template specializations. By building with only the template specializations I need for testing, the issue doesn't come up.
This is usually caused by VS mixing release and debug binaries for me. I have a script which cleans all the output directories, including the garbage VS puts into the projects .vs and Windows Temp folder. This always fixes the issue for me.
Related
We have a fairly large solution (>200 projects) and recently switched to VS2019. We are using Qt 5.14 with Qt Visual Studio Tools 2.7.1.18 and QtMsBuild. After we started using VS 2019 we get the following warning multiple times when we build the solution:
"...\AppData\Local\QtMsBuild\qt_globals.targets(131,5): warning : Qt::BuildLock[{E42AFBC7-0C5E-441F-B1DB-AE4C9E75F86E}]: Waiting..."
The GUID is the GUID from one of the projects in the solution. Sometimes the build process even hangs up on the "Waiting..." but in most cases the warning does not seem to have an obvious effect other than that it is displayed.
My question is: Where does this warning come from? Why does it show? And how can we get rid of it?
I recently had a problem pop up seemingly out of nowhere. It's described in this issue: Visual C++ Builds Failing due to Log File Access Collision
Based on my investigation, Visual Studio appears to be redundantly building project dependencies instead of just referencing them, and when multiple projects with the same dependency build simultaneously, they will both hit a log file (or some other file) simultaneously, causing one to fail due to access restriction.
It seems that the QtMsBuild developers solved this by adding a CriticalSection task to the QtPrepare target preventing concurrent access. The downside is that this gets reported as a warning.
I'm setting break points in Visual Studio before running the Local Windows Debugger, and they all say this when the debugger is running, with a small warning label on each break point. I can't see why this would be happening; people have talked about using different versions of Visual Studio and getting this error, but I made this project earlier today, pasting the base code from my professor into a new project created on my copy of Visual Studio 2012.
I found this when trying to fix a strange error in my program that wouldn't go away even though I manually fixed things (it was a string error that claimed I was using an index outside the bounds of the string; setting this value to 0 explicitly did not fix it) so I presume that this is the actual culprit.
Make sure you're properly building the code (Build Solution or Rebuild Solution).
In the output panel you should now be able to locate where the binaries are located.
Make sure you're debugging the said binaries by looking in the Debugging page of your project properties, the Command property should most likely be set at $(TargetPath).
Other things to look for. The project should be "Set as startup project", the program database option should be activated (by default). Don't modify the source after you started debugging.
I've a solution with ceratin no: of projects (all of them EXE projects in VC++).
I use VS2013.
This is tied to a version control system (Perforce).
I see that as soon as I start building any of the projects in this particular solution, the VS gets hung.
I see a text "Not Responding" at the top of the VS window.
Howvever teh compilation happens successfully but it takes a very long
time for the compilation due to this hang.
Id the expected compilation duration is "10seconds" it takes 3 mins to compile.
THis problem is seen in both Relaese and debug mode.
A point to note it that the very same projects were building super fast few days back & this issue started few days back.
Evevry other solution and it's projects (except this particular solution projects) are compiling very fast.
Any help is really useful.
You can also try to reset Visual studio settings trough:
Tools > Import and Export settings > reset all settings
this will reset all enviroinment settings, then restart visual studio.
edit:
I would also create a new project and copy/paste header and source files from old project to new one, and then compile.
I am not sure if you are using the P4VS Perforce Plugin with Visual Studio or not. However, there is a possibility that the compile is changing files that are checked into perforce or possibly somehow triggering an update. If you are using P4VS, please try building with it disabled and see if that
builds faster.
Try restarting your computer to see if that works. You may have some memory that was leaked from your program which is making it compile slower than usual. A restart of the computer should free all the memory.
I developed a small c++ program in Visual Studio 2012 on Windows7, 64bit (let's call it PC1). On that pc it runs fine!
Since I didn't have a versioning control system like SVN at hand, I copied ALL the project data (the exact folder structure, DLLs, source files, project files...) to a usb stick and moved it to another computer.
On that other engine there's Visual Studio 2010 on Windows7, 64bit (PC2).
So I just changed the platform toolset to v100 as described here.
I successfully compiled the project on PC2 (clean, build) and wanted to run the exe, but the command prompt stayed empty.
I then tried to debug and added a breakpoint at the very first line of main - which wasn't reached, the command prompt was still empty.
Ok, a usb stick is certainly not the most secure solution for data storage, so I gave it another try and moved it again - the problem remains.
Visual Studio's output on PC2 is the same as on PC1, so I couldn't find any anomalies there.
Yeah, there might be many error sources, so where can I start?
And how can I get a more verbose output for troubleshooting?
Or is this even a common phenomenon (perhaps due to different VS versions) and there's an simple way fix it?
This is not a full solution, but at least I'm a tiny step ahead:
In my last comment I wrote:
I took your advices into account and created a brand new project on PC2, VS2010. I exactly followed this guide: http://frozenhamster.wordpress.com/2011/02/11/lapack-on-windows-with-visual-studion-2010/
That didn't work either, so I removed I "out-commented" everything except for a single cout. Voila, that worked!
But as soon as I make use of the desired Armadillo (LAPACK and BLAS), the project compils but does not run.
What's going wrong here?
I don't get any compiler errors!
This is probably way too vague for any concrete answers, but this issue has been bothering me so I figured I'd give it a shot here:
Every time I hit F5 to run a project (and I'm talking something tiny 2 - 3 source files), first of all half the time it tells me that I need to rebuild the project even if the only change I made was add a breakpoint and then takes maybe ~20s to actually get the program running. This is a very basic command-line program and with gcc everything happens much, much faster. Any ideas?
PM
When using VS2010 on older operating systems (Like WinXP), then one should make sure to install latest UIA (Windows Automation) component MS KB971513. Failing to do this will cause VS2010 to perform poorly.
Also check ScottGu's Blog for other important hotfixes
The long waiting time before VS actually starts the application when hitting F5 occurs in VS 2008 as well. The simple solution to that is to delete the .suo file. I don't know if VS 2010 uses .suo files, but at least it's something you can try.
This might not be the case, but I remember VS used to act like this when I had lots of breakpoints.