While registering a host to the cluster of Ambari-server, I am getting the following error.
"Host checks were skipped on 1 hosts that failed to register."
I'm trying to install HDP 2.5 version on the instance of AWS.
I have tried to follow the documentation of Hortonworks.
https://docs.hortonworks.com/HDPDocuments/Ambari-2.5.0.3/bk_ambari-installation/content/set_the_hostname.html
I have added public ip address and public hostname to /etc/hosts file and change the name of host in /etc/hostname file on the server and on the host. Rebooted both, hostname got changed. Then I have stop iptables by
sudo service iptables stop
After doing everything, the host registration is still failing. Kindly help. I am stuck.
Background
From my experience with Ambari (Hortonworks) you have to explicitly setup your Hadoop nodes in each other's /etc/hosts file with the actual name/IPs that the Hadoop services will bind to. NOTE: hostnames should also be FQDN - fully qualified domain names.
For example if you're setting up the hosts as:
node01.mydom.com (10.0.0.2)
node02.mydom.com (10.0.0.3)
node03.mydom.com (10.0.0.4)
These entries should be in all 3 server's /etc/hosts and these should be the names used when referencing them within Ambari's installation/setup wizards.
If you do not pay special attention to this detail, Ambari's server will fail to find/manage any of the other node's that you're telling it to manage.
hostname of ambari-agents
The other item to look at is that the ambari-agent's and what hostnames they think they're going as.
$ ps -eaf|grep ambari_agent
root 3282 1 0 Jul30 ? 00:00:00 /usr/bin/python /usr/lib/python2.6/site-packages/ambari_agent/AmbariAgent.py start --expected-hostname=node01.mydom.com
root 3290 3282 1 Jul30 ? 08:24:29 /usr/bin/python /usr/lib/python2.6/site-packages/ambari_agent/main.py start --expected-hostname=node01.mydom.com
Debugging further
In the screen where you're attempting to register the other nodes as agents, there's a full log of what's happening and you can typically get the commands from this area and attempt to run them directly. I've done this on a number of occasions. The commands will often be python ... commands which you can then copy/paste from the logs and run on the Ambari server where you're attempting to run the install.
Related
I'm trying to set up an SSH tunnel to access my server (currently an ubuntu 16.04 VM on Azure) to set up safe access to my django applications running on it.
I was able to imitate the production environment with Apache WSGI and it works pretty good but since I'm trying to develop the application I don't want to make it available to broader public right now - but to make it visible only for a bunch of people.
To the point: when I set up the ssh tunnel using putty on Windows 10 (8000 to localhost:8000) and I run http://localhost:8000/ I get the folowing error:
"Not Found HTTP Error 404. The requested resource is not found.".
How can I make it work? I run the server using manage.py runserver 0:8000.
I found somewhere that the error may be due to the fact that the application does not have access to ssh files, but I don't know whether that's the point here (or how to change it).
Regards,
Dominik
After hours of trying I was able to solve the problem.
First of all, I made sure putty connects to the server and creates the desired tunnel. To do that I right-clicked on the putty window (title bar) and clicked event log. I checked the log and found the following error:
Local port 8000 forwarding to localhost:8000 failed: Network error:
Permission denied
I was able to solve it by choosing other local port (9000 instead of 8000 in my instance).
Second of all, I edited the sshd_config file: sudo vi etc/ssh/sshd_config
and added these three lines:
AllowAgentForwarding yes
AllowTcpForwarding yes
GatewayPorts yes
I saved the file and restarted the ssh service:
sudo service ssh stop
sudo service ssh start
Now when I visit localhost:9000 everything works just fine.
I'm trying to install the enterprise edition of neo4j on an existing EC2 (Amazon linux) instance. So far I've
wget "link to enterprise"
untar the file
renamed and moved the folder to NEO4J_HOME
then went into the config files for neo4j.properties to make the following changes:
# Enable shell server so that remote clients can connect via Neo4j shell.
remote_shell_enabled=true
# The network interface IP the shell will listen on (use 0.0.0 for all interfaces)
remote_shell_host=127.0.0.1
# The port the shell will listen on, default is 1337
remote_shell_port=1337
EDITED Christophe Willemsen pointed out that for my original error, I had forgotten to restart the server at that point but I was still unable to access the web server while it was running. So to make it more clear, I've edited the remaining post:
I went to neo4j-server.properties and uncommented:
org.neo4j.server.webserver.address=0.0.0.0
And start the server
NEO4J_HOME/bin/neo4j start
WARNING: Max 1024 open files allowed, minimum of 40 000 recommended. See the Neo4j manual.
Using additional JVM arguments: -server -XX:+DisableExplicitGC -Dorg.neo4j.server.properties=conf/neo4j-server.properties -Djava.util.logging.config.file=conf/logging.properties -Dlog4j.configuration=file:conf/log4j.properties -XX:+UseConcMarkSweepGC -XX:+CMSClassUnloadingEnabled -XX:-OmitStackTraceInFastThrow
Starting Neo4j Server...WARNING: not changing user
process [28557]... waiting for server to be ready..... OK.
http://localhost:7474/ is ready.
checking the status:
NEO4J_HOME/bin/neo4j status
Neo4j Server is running at pid 28557
I can run the shell but the when I go to localhost 7474 I still can not connect
Any help would be appreciative. The only tutorial or help I've found assumed I was starting from scratch with a new instance. If someone could provide some instructions for installing or fix my configuration that would be great.
Thanks!
You have to edit neo4j-server.properties and uncomment the line with:
org.neo4j.server.webserver.address=0.0.0.0
So that the db listens on an external interface not just localhost, and you have to open the port (7474) in your firewall rules.
Make sure to secure access to the db though:
http://neo4j.com/docs/stable/security-server.html
I have an application running in a VirtualBox VM that for testing purposes needs to connect to the host machine. The VM is started with Vagrant and managed by Puppet.
What is the best way to set-up this connection? For example, om my host machine the app runs on port 9200. So from my VM I'd like to go to myhostmachine:9200.
Currently I'm thinking of hacking in a small command that adds hostvm as a entry to /etc/hosts using a simple command like this to figure out my host ip (which is the same as the default route).
/sbin/ip -4 route list 0/0 | grep -m 1 default | awk '/default/ { print $3 }'
And just let Puppet run that every time using the exec functionality. However, I get the feeling there has to be a better way.
The guest OS is Ubuntu 12.04 and the Host is OS-X.
Thanks!
As far as I know, at the moment Vagrant always sets up a natted interface to connect to virtualbox, so I think that the ip of your host machine will always be the 10.0.2.2 address you mentioned. I reckon a puppet host declaration might be easier to manage than running that command each time.
host { 'myhostmachine':
ip => '10.0.2.2',
}
The puppet resource reference for hosts has all the other params you can set too.
I was then able to access the host using myhostmachine:9200
I have to do distributed testing using JMeter. The objective is to have multiple remote servers in AWS controlled by one local server send a file download request to another server in AWS.
How can I set up the different servers in AWS?
How can I connect to them remotely?
Can someone provide some step by step instructions on how to do it?
I have tried several things but keep running into connectivity issues across networks.
We had a similar task and we ran into a bunch of issues as well. Here are the details of the whole process and what we did to resolve the issues we encountered. Hope it helps.
We needed to send requests from 5 servers located in various regions of the world. So we launched 5 micro instances in AWS, each in a different region. We chose the regions to be as geographically apart as possible.
Remote (server) JMeters config
Here is how we set up each instance.
Installed java:
$ sudo apt-get update
$ sudo apt-get install default-jre
Installed JMeter:
$ mkdir jmeter
$ cd jmeter;
$ wget ftp://apache.mirrors.pair.com//jmeter/binaries/apache-jmeter-2.9.tgz
$ gunzip apache-jmeter-2.9.tgz;tar xvf apache-jmeter-2.9.tar
Edited the jmeter.properties file in the /bin folder of the JMeter installation and uncomment the line containing the server.rmi.localport setting. We changed the port to 50000.
server.rmi.localport=50000
Started JMeter server. Make sure the address and the port the server reports listening to are correct.
$ cd ~/jmeter/apache-jmeter-2.9/bin
$ vi jmeter-server
Local (client) JMeter config
Then we set up JMeter to run tests remotely on these instances on our local client machine:
Ensured to use the same version of JMeter as was running on the servers. Installed Java and JMeter as described above.
Enabled remote testing by editing the jmeter.properties file that can be found in the bin folder of the JMeter installation. The parameter remote_hosts needed to be set with the public DNS of the remote servers we were connecting to.
remote_hosts=54.x.x.x,54.x.x.x,54.x.x.x,54.x.x.x,54.x.x.x
We were now able to tell our client JMeter instance to run tests on any or all of our specified remote servers.
Issues and resolutions
Here are the issues we encountered and how we resolved them:
The client failed with:
ERROR - jmeter.engine.ClientJMeterEngine: java.rmi.ConnectException: Connection - refused to host: 127.0.0.1
It was due to the server host returning the private IP address as its address because of Amazon NAT.
We fixed this by setting the parameter RMI_HOST_DEF that the /usr/local/jmeter/bin/jmeter-server script includes in starting the server:
RMI_HOST_DEF=-Djava.rmi.server.hostname=54.xx.xx.xx
Now, the AWS instance returned the server’s external IP, and we could start the test.
When the server node attempted to return the result and tried to connect to the client, the server tried to connect to the external IP address of my local machine. But it threw a connection refused error:
2013/05/16 12:23:37 ERROR - jmeter.samplers.RemoteListenerWrapper: testStarted(host) java.rmi.ConnectException: Connection refused to host: xxx.xxx.xxx.xx;
We resolved this issue by setting up reverse tunnels at the client side.
First, we edited the jmeter.properties file in the /bin folder of the JMeter installation and uncommented the line containing the client.rmi.localport setting. We changed the port to 60000:
client.rmi.localport=60000
Then we connected to each of the servers using SSH, and setup a reverse tunnel to port 60000 on the client.
$ ssh -i ~/.ssh/54-x-x-x.us-east.pem -R 60000:localhost:60000 ubuntu#54.x.x.x
We kept each of these sessions open, as the JMeter server needs to be able to deliver the test results to the client.
Then we set up the JVM_ARGS environment variable on the client, in the jmeter.sh file in the /bin folder:
export JVM_ARGS="-Djava.rmi.server.hostname=localhost"
By doing this, JMeter will tell the servers to connect to localhost:60000 for delivering their results. This ends up being tunneled back to the client.
The SSH connections to the servers kept dropping after staying idle for a little bit. To prevent that from happening, we added a parameter to each of the SSH tunnel set up directing the client to wait 60 seconds before sending a null packet to the server to keep the connection alive:
$ ssh -i ~/.ssh/54-x-x-x.us-east.pem -o ServerAliveInterval=60 -R 60000:localhost:60000 ubuntu#54.x.x.x
(.ssh/config version of all required SSH settings:
Host 54.x.x.x
HostName 54.x.x.x
Port 22
User ubuntu
ServerAliveInterval 60
RemoteForward 127.0.0.1:60000 127.0.0.1:60000
IdentityFile ~/.ssh/54-x-x-x.us-east.pem
IdentitiesOnly yes
Just use ssh 54.x.x.x after setting this up.
)
I just went though this on openstack and found the same issues... no idea why the jmeter remoting documentation only covers half the required steps. You can do it without tunnels or touching the properties files.
You need
All nodes to advertise their public IP - on AWS/OS this defaults to the private IP
Ingress rules for the RMI port which defaults to 1099 - I use this
Ingress rules for the RMI "local" port which defaults to dynamic. Below I use 4001 for the client and 4000 for servers. The port can be the same but note the properties are different.
If you are using your workstation as the client you probably still need tunnels. Above Archana Aggarwal has good tips for tunnels.
Remote servers
Set java.rmi.server.hostname and server.rmi.localport inline or in the properties file.
jmeter-server -Djava.rmi.server.hostname=publicip -Dserver.rmi.localport=4000
Sneaky server on client
You can also run one on the same machine as the client. For clarity I've set java.rmi.server.hostname but left server.rmi.localport as dynamic
jmeter-server -Djava.rmi.server.hostname=localip
Client
Set java.rmi.server.hostname and client.rmi.localport inline or in the properties file. Use -R etc like so:
jmeter -n -t Test.jmx -Rremotepublicip1,remotepublicip2 -Djava.rmi.server.hostname=clientpublicip -Dclient.rmi.localport=4001 -GmypropA=1 -GmypropB=2 -lresults.jtl
When you go for distributed testing using JMeter in AWS, I would suggest you to use docker - which will help us with jmeter test infrastructure very quickly. This way we can also ensure that same version of java and jmeter are installed in all the instances of amazon which is very important of JMeter distributed testing.
Ensure that - you set below properties and ports are open for jmeter-server. [they do not have to be 1099,50000 exactly]
server.rmi.localport=50000
server_port=1099
java.rmi.server.hostname=SERVER_IP
for client
client.rmi.localport=60000
java.rmi.server.hostname=SERVER_IP - this step is very important as the container in aws instance will have their own IP address in the docker network - so master and slave can not communicate. So we explicitly set this property
More info:
http://www.testautomationguru.com/jmeter-distributed-load-testing-using-docker-in-aws/
I am new to EC2 and web development. Currently I have a Linux EC2 instance running, and have installed Django. I am creating a test project before I start on my real project and tried running a Django test server.
This is my output in the shell:
python manage.py runserver ec2-###-##-##-##.compute-1.amazonaws.com:8000
Validating models...
0 errors found
Django version 1.3, using settings 'testsite.settings'
Development server is running at http://ec2-###-##-##-##.compute-1.amazonaws.com:8000/
Quit the server with CONTROL-C.
To test that it is wroking I have tried visiting: ec2-###-##-##-##.compute-1.amazonaws.com:8000 but I always get a "Cannot connect" message from my browser.
Whenever I do this lcoally on my computer however I do successfully get to the DJango development home page at 127.0.0.1:8000. Could someone help me figure out what I am doing wrong / might be missing when I am doing this on my EC2 instance as opposed to my own laptop?
Using an ec-2 instance with Ubuntu, I found that specifying 0.0.0.0:8000 worked:
$python manage.py runserver 0.0.0.0:8000
Of course 8000 does need to be opened for TCP in your security group settings.
You probably don't have port 8000 open on the firewall. Check which security group your instance is running (probably "default") and check the rules it is running. You will probably find that port 8000 is not listed.
1) You need to make sure port 8000 is added as a Custom TCP Rule into your Security Group list of inbound ports
2) Odds are that the IP that you see listed on your AWS Console, which is associated to your instance is a PUBLIC IP OR a PUBLIC Domain Name(i.e. ec2-###-##-##-##.compute-1.amazonaws.com or 174.101.122.132) that Amazon assigns.
2.1) If it is a public IP, then your instance has no way of knowing what the Public IP assigned to it is, rather it will only know the its assigned Local IP.
2.2) To get your Local IP on a Linux System, type:
$ ifconfig
Then look at the eth0 Data and you'll see an IP next to "inet addr" of the format xxx.xxx.xxx.xxx (e.g. 10.10.12.135) This is your Local IP
3) To successfully runserver you can do one of the following two:
$ python manage.py runserver <LOCAL IP>:8000
or
$ python manage.py runserver 0.0.0.0:8000
** Option Two also works great as Ernest Ezis mentioned in his answer.
EDIT : From The Django Book : "The IP address 0.0.0.0 tells the server to listen on any network interface"
** My theory of Public IP could be wrong, since I'm not sure how Amazon assigns IPs. I'd appreciate being corrected.
I was having the same problem. But I was running RHEL on EC2. Besides from adding a rule to security group, I had to manually add a port to firewalld.
firewall-cmd --permanent --add-port=8000/tcp
firewall-cmd --reload
That worked for me! (Although no idea why I had to do that)
Yes, if you use quick launch EC2 option, you should add new HTTP rule (just as it appears on the list) to run a development server.
Adding a security group with the inbound rules as follows usually does the trick unless you have something else misconfigured. The port range specifies which port you want to allow incoming traffic on.
HTTP access would need 80
HTTP access over port 8000 would need 8000
SSH to server would need 22
HTTPS would need 443