Qt5PrintSupportd.dll is missing - c++

I searched about that problem everywhere, i really don t know what to do.I created a notepad app, in compiler everything went fine but when i m running it external it gives me that error : The program can t start because QT5PrintSupportd.dll is missing from your computer
Edit: Everything works fine now thanks a lot guys.

For example my Qt install is inside : C:\Qt\Qt5.11.1\5.11.1\msvc2015_64\bin
Qt5PrintSupportd.dll is inside the bin folder. If you can't find the dll reinstalled Qt.
After copy this dll near to the .exe or add to system32.
For window, may be you need to add the plugin folder printsupport near to the .exe file.
You can find this folder in C:\Qtpath\plugins\printsupport
----
| app.exe
| printsupport\windowsprintersupportd.dll

The Qt command 'windeployqt' is the proper way to copy all of the needed Qt stuff to your application's directory.

PrintSupport is a standard module of Qt 5, so you should have it within your Qt's installation dir: <qt_dir>\bin\Qt5PrintSupport[d].dll.
Notice the d suffix in the filename, it indicates it is the debug version. Qt5PrintSupport.dll is for release, Qt5PrintSupportd.dll is for debug.
Now, you have to copy that DLL from your Qt's installation and paste it in the same directory as of your executable (probably you've also copied other Qt DLLs there). Again, be aware of the difference between release and debug DLLs.
Note: I would not copy it to any directory in the path but to your executable's directory. In this way you avoid future conflicts if you upgrade your Qt version.

Related

Qt application release exe not running

I have built a very simple calculator in Qt. When I run it in release mode from qt creator, everything works fine. However when I go to the release folder and run it, it gives QT5Core.dll, QT5Widgets.dll and QT5Gui.dll not found. After running windeployqt there by:
windeployqt .
All the dll get added. However, it then gives error VCRUNTIME140_APP.dll and MSVCP140_APP.dll not found. After copying them to the folder. The exe doesn't give any error on double clicking but just does not start. What should I do?
I found this solution here, however I cannot find any qml file in the application directory.
I created it as a QT widget application. I am using Windows 10 with Visual Studio 2017 and MSVC2017 64bit desktop kit. The application is in C++.
Update:
Running the command
windeployqt Calculator.exe
after adding qt to the path seems to do the trick. Application working even after removing qt from the path. Will try running the app inside vm just to be extra sure.
When running from the command line, add your Qt Bin directory to the PATH. For example:
C:\> PATH=C:\Qt\Qt5.11.0\5.11.0\msvc2017_64\bin;%PATH%
You can solve the problem as selbie described it. An another way is to copy the missing .dll-Files to the folder where the.exe is placed.
See here https://doc.qt.io/Qt-5/windows-deployment.html#creating-the-application-package :
To deploy the application, we must make sure that we copy the relevant Qt DLLs (corresponding to the Qt modules used in the application) and the Windows platform plugin, qwindows.dll, as well as the executable to the same directory tree in the release subdirectory.
set variable VCINSTALLDIR, example:
set VCINSTALLDIR=p:\Programs\Microsoft Visual Studio\2017\Community\VC\
and next run
windeployqt.exe app.exe
Or copy vc_redist.x64.exe from Redist subfolder into folder with your application.
As #mosa mentioned, To deploy the application, we must make sure that we copy the relevant Qt DLLs (corresponding to the Qt modules used in the application) and the Windows platform plugin, qwindows.dll, as well as the executable to the same directory tree in the release subdirectory.
To add missing .dll files first open QT MSVC Console and type windeployqt.exe command,
Then you have to go to the directory which .exe file contains. Let's assume my .exe is in the desktop,
C:/
cd user/indrajith/desktop
Then you can add missing .dll files using following command,
windeployqt.exe --quick.
Finally, just double click your .exe file to run the program.
Simple Solution:
Copy "bin" and "plugins" folders from the qt setup directory(C:\Qt\6.2.4\mingw_64) to your release folder.
Put your .exe file inside that "bin" folder and done.
Now, your .exe application should run.The bin and plugin folders contain required .dll files and unnecessary files can be removed manually.

QT Deployment error

I am trying to deploy a QT5.4.1 appplication on Windows 7 - x86.
As always, everything is working fine on my machine, but not in the end user's machine.
When I try to run the app, it gives me the following error:
After searching on the internet, most solutions say that I need to add a platforms folders containing some dlls (qminimal, qoffscreen, etc) to the deployment package. I tried that with no success.
The funny thing is that I copied QT installation folder to the end user machine and deleted everything except this folder (C:\Qt\Qt5.4.1\5.4\msvc2012_opengl\plugins\platforms) and it works fine.
So, somehow my app is looking for the platforms folders in QT installation folder instead of the deployment package folder.
Does anyone know how to solve it?
EDIT:
I have managed to change all QT Dlls to the release version (without "d" sufix). However, when i compile my project I still get some vc++ dlls in debug mode. I checked all project configurations in both "linker" and "c/c++" sections and they all use "release" configurations. When I run the program, It gives me a "debug assertion failed". Why I am getting the debug versions of vc++ dlls?
Here is the dependency walker screenshot
The comments of Mezzo seem very relevant. We regularly deploy commercial Qt Windows applications. You could use dependency walker to find the dependencies or just double click on the executable and look at the Windows complaint about what dll's are missing. Just copy them to the deploy location, preferably with a qmake script.
The plugin dll's are more difficult to deal with. They do not show up as dependencies. The operating system could complain about their absence (dll's located in the subdir "platforms" for instance) or your application might just not use their functionality (dll's in the subdir "imageformats" for instance) without any complaint. To protect yourself against the latter case you have to test drive your application thoroughly.
Windows does not need a qt.conf file. Just create the subdirs "platforms", "imageformats", ... in the application dir and copy the plugin dll's there. As an example I show the full content of an (mingw) application dir that even when copied to a virtual machine runs without any problem.
Qt5Btc1.dll is our own dll.
I figure out what is wrong, although I don't have the solution yet. Even without the solution, I think this answer might be helpful.
My project output is a DLL that has a GUI made in QT.
Another program calls this DLL and during DLL_PROCESS_ATTACH a QT GUI is created.
According to the documentation, QT looks for the plugins in:
in the directory containing the application executable, i.e. > QCoreApplication::applicationDirPath() + QDir::separator() + "qt.conf"
That´s why the QCoreApplication::applicationDirPath() is not the deployment directory where the DLL is located, but the directory where the external program *.exe is running. I think QT is looking for the qt.conf file in this *.exe location
EDIT: there is nothing to do with debug or release versions

Qml program does not run

I've build qt for static linking to make just one exe without any dll's, configured creator. On my computer everything works. But when i run a program on other computers nothing happens. Process starts, but nothing is shown. And it's only with qml, it works with c++ projects.
I tried to make a simple exe and add all needed libraries by windeployqt, but it doesn't change anything.
Maybe someone can tell me, what am i doing wrong?
I have found that with QML applications you might need directories from the following directory:
..\Qt5.3.2\5.3\msvc2013_opengl\qml\
The directories needed depends on what you have included.
For my application I had the following structure:
my.exe
QtGraphicalEffects
QtQuick
QtQuick.2
First run the mingw on cmd terminal of windows (on my case it is on C:\Qt\6.1.1\mingw81_64\bin).
After this go to your project output (where is your .exe file that you want to run on another windows machine).
Run the windeployqt command:
windeployqt.exe --qmldir C:\Qt\6.1.1\mingw81_64\qml .
I run the example project "Qt Quick Application - Scroll".
The blank screen only happens on PCs that do not have a video card with OpenGL 2.0 support.
Try this:
1. Used dependency walker(http://www.dependencywalker.com/) to see the exact path of the dlls needed. Try it because both QtCreator and QT framework both have the same dlls and you must pinpoint the exact ones used. I copied all dlls needed in the same folder as the app.
2.I have copied the folder platforms from QT framework /plugins and copied it in the same folder as the app. Now the app comtained also plugin/platform/ folder with all its dlls
3.And the most important step in my case is to create a file named qt.conf in the same folder as the app . This file should contain the path to the plugins. My qt.conf file contains:
[Paths]
Libraries=../lib/qtcreator
Plugins=plugins
Imports=imports
Qml2Imports=qml
Try copying every DLLs in below folder to the folder where your exe is.
C:\Qt\x.x.x\msvc20xx_xx\bin\
If the exe runs normally, try deleting the DLLs some by some to find out what dll is needed and what is not needed.

Application failed to start because it could not find or load the QT platform plugin "windows"

I have looked through all of the questions that appear to be related on stack overflow, and none of the solutions seem to help me.
I am building a Qt application with this setup:
Windows 7 Professional x64
Visual Studio 2012
Qt 5.2.0 built with configure -developer-build -debug-and-release -opensource -nomake examples -nomake tests -platform win32-msvc2012 -no-opengl
Project uses QtSingleApplication (qt-solutions)
Application is a 32 bit application
qmake run with the following: -makefile -spec win32-msvc2012
.pri uses QMAKE_CXX += /D_USING_V110_SDK71_
I can build and run my program fine on my development machine (noted above); I can also install and run the package from Program Files directory on dev machine.
When I install and run on a Windows Vista machine (multiple machines)
VC++ redist 2012 11.0.61030.0 installed
VC++ redist 2010 10.0.40219 installed
plus 2005, 2008 versions of redist
(also fails on a clean install of Windows 7)
I get:
Application failed to start because it could not find or load the QT platform plugin "windows"
So I followed the instructions and added a .platforms/ directory, and added qwindows.dll (also added qminimal.dll and qoffscreen.dll); I also added libEGL.dll, libGLESv2.dll (even though I shouldn't need them I don't think)
Once I added qoffscreen.dll I now get the additional message: Available platform plugins are: offscreen
If I run through Dependency Walker I get this error listed:
GetProcAddress(0x76CA0000 [KERNEL32.DLL], "GetCurrentPackageId") called from "MSVCR110.DLL" at address 0x6AC6FDFA and returned NULL. Error: The specified procedure could not be found (127).
and then further down get the:
GetProcAddress(0x745A0000 [UXTHEME.DLL], "BufferedPaintUnInit") called from "COMCTL32.DLL" at address 0x745FFBF8 and returned 0x745AE18C.
This application failed to start because it could not find or load the Qt platform plugin "windows".
Available platform plugins are: offscreen.
Reinstalling the application may fix this problem.
Any ideas how to fix this dll issue?
The error is caused because the program can't find qwindows.dll
qwindows.dll has to be in a folder named platforms so that the path from your executable to the dll is platforms/qwindows.dll
Whereas this wasn't enough in my case. I had also to add following line at the beginning of my main()
QCoreApplication::addLibraryPath("./");
Then everything worked.
The application is able to run on the host system, since the Qt bin path is in the system PATH variable.
There is a standard Qt tool for deployment of Qt applications on Windows windeployqt to be able to run the application on target machines that do not have Qt installed.
That tool takes care about Qt DLL dependencies, makes a copy of platforms\qwindows.dll and also it makes a copy of libraries that you cannot detect with the Dependency Walker, since image plugins and some other DLLs are loaded at runtime.
You do not even need to have your Qt bin folder in your environment PATH. The simplest deployment:
copy built exe binary to a new folder
open cmd console in that folder
call windeployqt using the full path (if it is not in the system PATH) and provide your executable, for example:
c:\Qt\Qt5.2.1\5.2.1\msvc2010_opengl\bin\windeployqt.exe application.exe
As a result you have in that folder all needed Qt DLLs to run the application.
The tool windeployqt has various options. It can also take care about deployment of qml related files.
Of course you can have also issues with MSVC redistributables, but those should be deployed separately and installed once per system.
Only some 3rd party libraries should be copied manually if they are used, for example OpenSSL.
I got this issue and how I solved it:
Used dependency walker(http://www.dependencywalker.com/) to see the exact path of the dlls needed. Try it because both QtCreator and QT framework both have the same dlls and you must pinpoint the exact ones used.
I copied all dlls needed in the same folder as the app.
I have copied the folder platforms from QT framework /plugins and copied it in the same folder as the app. Now the app comtained also plugin/platform/ folder with all its dlls
And the most important step in my case is to create a file named qt.conf in the same folder as the app . This file should contain the path to the plugins. My qt.conf file contains:
[Paths]
Libraries=../lib/qtcreator
Plugins=plugins
Imports=imports
Qml2Imports=qml
I had the same issue "Application failed to start because it could not find or load the QT platform plugin "windows"
I fixed this by copying below files to the app.exe (my app executable) folder,
Qt5Core.dll, Qt5Gui.dll, Qt5Widgets.dll and a "platforms" directory with qminimal.dll, qoffscreen.dll, qwindows.dll.
I hope this will help someone
Note this issue can also be caused if the search path for qwindows.dll that is encoded in your app includes the path where you installed Qt. Consider the following scenario:
I install Qt to c:\Qt\...
I develop an app and deploy it correctly somewhere else.
It runs on any computer properly because it includes qwindows.dll in a subdirectory.
I upgrade my local Qt to a new version.
I try to run my app again.
The result is this error, because the qwindows.dll in c:\Qt\... is found before the one in its local directory and it is incompatible with it. Very annoying.
A solution is to place a file qt.conf in the same directory as your exe file. I don't know how to avoid this. If you used the tool windeployqt.exe to deploy your app, so you have a subdirectory called platforms, then this is sufficient:
[Paths]
Plugins=.
For me, I needed to set QT_QPA_PLATFORM_PLUGIN_PATH to the platforms directory and then it worked.
For what it's worth, this solution was also mentioned on GitHub.
For the people who have this problem in the future - I have a dirty little hack, worked for me. Try at your own risk.
Follow all the steps in Initial deployment (Quick and dirty) [http://wiki.qt.io/Deploy_an_Application_on_Windows]
Close Qt Creator.
Copy the following into C:\Deployment\ The release version of MyApp.exe All the .dll files from
C:\Qt\5.2.1\mingw48_32\bin\ All the folders from
C:\Qt\5.2.1\mingw48_32\plugins\
(If you used QML) All the folders from C:\Qt\5.2.1\mingw48_32\qml\ Rename C:\Qt\ to C:\QtHidden\ (This turns your PC into a clean environment, just like one that doesn't have Qt installed).
Launch C:\Deployment\MyApp.exe.
Now for the hack -
Duplicate your folder for safety
If your file was in /cat/Deployment, go to /cat
Now, delete the Deployment folder while the .exe is still running.
It will tell you that it cannot delete certain files, so say Skip(or skip all)
What you're left with is the list of all the .dll files that your .exe was actually using and could not delete: the list of all the files and only the files that you need to keep.
You can close the .exe file now.
To check whether it is deploying okay, go into the folder where you installed it, say C:/Qt and rename it to C:/NotQt (basically make Qt invisible to the system).
If it works now, it will deploy on other systems more often than not.
Well I solved my issue, although I'm not sure what the difference is:
I copied every dll from my qt directory into both ./ and ./platforms of my application directory.
The application got past the error, but then crashed.
VERSION.dll was causing the crash (noted in dependency walker), so I removed it from both places.
The Application started up, so I systematically removed all unneeded dll's.
This got me back to the same state I had originally.
I then uninstalled my application and re-installed (with only the ./platforms/qwindows.dll file remaining), application works correctly.
So all I can assume is that I had an incorrect version of qwindows.dll in the platforms directory.
I got the same issue:
1. it can run in VS2010;
2. it can run in a folder with files as:
app.exe
\platforms\qwindows.dll
...
but it failed to load qwindows on a clean machine with same OS as the developing one.
Solved simply by move the platform folder to plugins:
app.exe
plugins\platforms\qwindows.dll
plus: qwindows.dll can be renamed as any you like as it is queried by an plugin interafce:
qt_plugin_query_metadata()
It's missing qwindows.dll, which normally should be in platforms, unless you add:
QCoreApplication::addLibraryPath("<yourpath>");
If you don't do this btw, and put your qwindows.dll somewhere else, Qt will search your PATH for the DLL, which may take a LOT of time (10s - several minutes)!
I fixed this by placing qt.conf in my application's exe folder:
[Paths]
Prefix=C:/Qt/Qt5.11.2/5.11.2/msvc2017
Where:
I have installed a custom Qt kit in C:\Qt\Qt5.11.2\5.11.2\msvc2017
qt.conf informs the app where the custom kit via the Prefix property. Note use forward slashes not backslashes (!)
And, optionally, the Qt kit's bin folder is included in my PATH environment variable
Defining Prefix in your qt.conf file allows it to find the qwindows.dll platform plugin when your app starts.
Tried all the above - turned out for me it was simply because I didn't have the main Qt dlls in the apps folder
Qt5Core.dll
Qt5Widgets.dll
etc
You need to add environmental variable QT_QPA_PLATFORM_PLUGIN_PATH to the system which points to the platforms directory in QT plugins. In my case, I was using Anaconda and PySide2. Therefore my directory path was C:\ProgramData\Anaconda3\envs\cv\Lib\site-packages\PySide2\plugins. This fixes the issue for every QT project. Otherwise, you have copy platforms directory to every QT project.

Can't start a Program because Qt5Cored.dll is missing

I compiled a simple Qt 5 project successful in Qt Creator. When run from within Qt Creator it works.
But when i transferred the executable into another location is produces the following error message on the cmd console;
The program can't start because Qt5Cored.dll is missing from your computer.
Try reinstalling the program to fix this program.
I tried to find Qt5Cored.dll in the Qt5 directory could not find. But strange thing is the program runs from Qt Creator. Any help please. I'm on windows 7 64 bit using Qt5 with MinGW
The file Qt5Cored.dll will exist on your system, otherwise it would not work from Qt Creator either. I think it's just Windows search that lets you down. Open a cmd prompt and do a dir c:\Qt5Cored.dll /s
Another note is that those *d.dll are debug DLL's, which means you are distributing a debug version of your application. You might want to build a release version for distribution instead. (In which case you'll need Qt5Core.dll)
On my computer the Qt5Core.dll and other .dll files are stored here C:\Qt\Qt5.9.1\5.9.1\xxx\bin (where xxx is the compiler version). Your Qt version may differ.
Copy the .dll files you want to the application location (where your .exe file is). These are the minimum .dll files I needed to copy for my basic app to work:
libgcc_s_dw2-1.dll
libstdc++-6.dll
libwinpthread-1.dll
Qt5Core.dll
Qt5Gui.dll
Qt5Widgets.dll
For me, it was located in this directory. (Qt Version : 5.11.2)
E:\Qute\5.11.2\mingw53_32\bin
On adding all the .dlls in the same dir. program worked.
For the solution what you need to do is to copy the path of the bin folder in your installed Qt creator. Mine was D:\QTCreator\5.12.10\mingw73_64\bin and then paste it in the Environment variable of your computer (which can be found in your advanced system settings of your PC)
Another option, instead copying .dll files to .exe folder, is to add the .dll location to the path environment.
I added the .dll path to user environment path in Windows 10 and worked.
Possibly problem is that RStudio does not behave well when quitting. Try restarting Windows to properly close the Qt5 libraries.
If you have installed Qt Creator you have the missing dlls. Mine were at C:\Qt\5.15.2\mingw81_64\bin. I added the path to my environmental variables and my executable now works. This solution allows you to move your application around without moving dlls.