I have been trying enter couple of commands on a command window with python script. I was able to open the .exe file by checking the other questions.
However, now my code:
import os
os.chdir(r'filepath')
os.system("start /B start filepath\application.exe")
opens the application and it asks for an input file name, then it will ask for output file name. Is there a way to do that. This will be used for ArcGIS so it needs to be done in python 2.7.
I checked all related questions but did not find the answer. I would appreciate it very much if you could help.
Finally! It was easier than I thought but I needed lots of research. This code for python 2.7 which may differ for other versions.
import os
import subprocess
os.chdir(r'filepath')
subprocess.check_call([r"filepath\your_.exe_app", 'your_input'])
Related
I have a problem and hope someone can help me. I am currently trying to write a script for Termux or Termux:Task. My script currently looks like this:
#!/data/data/com.termux/files/usr/bin/bash
cd /./sdcard/www/public/
wp post list sleep 5
Every time I load the script I get the following error message:
/data/data/com.termux/files/usr/bin/wp: /usr/bin/env: bad interpreter: No such file or directory.
I've been looking for a solution to my problem for hours, unfortunately without success.
I am using an extension for Termux called "WordPress CLI". When I start termux and enter the commands individually, everything works. But as soon as I write the commands into a sh script and start it doesn't work anymore. :(
Can anyone help me?
Thanks a lot
This is simple error you can fix it by replacing !/data/data/com.termux/files/usr/bin/bash. With #!/data/data/com.termux/files/usr/bin/bash
Please tell if you get error again
Try with #!/usr/bin/env bash in the shebang line.
Termux-exec allows you to execute scripts with shebangs for traditional Unix file structures. So shebangs like #!/bin/sh and #!/usr/bin/env python should be able to run without termux-fix-shebang.
From https://wiki.termux.com/wiki/Termux-exec
According to doc:
Why do I keep getting a '/bin/sh bad interpreter' error?
This error is thrown due to access script interpreter at nonexistent
location.
Termux does not have common directories like /bin, /sbin, /usr/bin at
their standard place. There is an exception for certain devices where
/bin is a symbolic link to /system/bin, but that does not make a
difference.
Interpreters should be accessed at this directory only:
/data/data/com.termux/files/usr/bin
There are three ways to fix this:
Install termux-exec by using pkg install termux-exec. It won’t affect the current session, but after a restart should work without
any setup. Not needed if your Termux is up to date. If still not
working, try the next workaround.
Use command termux-fix-shebang to fix the shebang line of specified file.
Use termux-chroot from package proot to setup a chroot environment mimicking a normal Linux file system in Termux.
termux-fix-shebang my_script.py of second method work for me, which it modify the shebang(first line of my_script.py) from #!/usr/bin/env python to #!/data/data/com.termux/files/usr/bin/env python. Since /usr/bin/ is not exist in Android, that's why it throws the error /usr/bin/env: bad interpreter: No such file or directory. The other solution is run with python my_script.py, neither of my_script.py nor ./my_script.py.
In my test, termux-exec of the first method only work if I added correct shebang in main script(child OR child of child script no need) and ran command export LD_PRELOAD=/data/data/com.termux/files/usr/lib/libtermux-exec.so.
And for the issue of this question, error shows /usr/bin/env in the middle with /data/data/com.termux/files/usr/bin/wp even though the shebang of script #!/data/data/com.termux/files/usr/bin/bash looks ok, it means that wp command (located at /data/data/com.termux/files/usr/bin/wp) used inside the script contains shebang #!/usr/bin/env wp and should modify it to #!/data/data/com.termux/files/usr/bin/env wp too. termux-exec of first method should fix this specific case too(already has correct shebang in main script).
I am running an executable from cmd:
*.exe input.inp
I want to run it using python and tried following:
os.system('"*.exe"')
But don't know how to specify input file as well. Any suggestions?
import os
from subprocess import Popen, PIPE
p = Popen('fortranExecutable', stdin=PIPE) #NOTE: no shell=True here
p.communicate(os.linesep.join(["input 1", "input 2"]))
For more please refer to:
Using Python to run executable and fill in user input
I had to launch cmd window and specify input file location from within Python script. This page was really helpful in getting it done.
I used Popen(['cmd', '/K', 'command']) from above page and replaced '/K' with '/C' in it to run and close the cmd window.
import os
os.system(r'pathToExe.exe inputFileOrWhateverOtherCommand')
I'm having trouble running some codes that import cx_Oracle in command line, though the same codes work in console. Is there anything else I will need to set up in order to get this to work via command line please?
Saved just one line of code "import cx_Oracle" as test.py.
Run this line in ide (Spyder), iPython Notebook => no issues
run this by opening a command line window from the same folder the .py file is saved in, and run python test.py and encounter the below:
import cx_Oracle
ImportError: DLL load failed: %1 is not a valid Win32 application.
Not sure if there is anything additional I will need to set up to run cx_Oracle via command line? Have tried all the suggestions on setting PATH, ORACLE_HOME, re-installing but could not get this to work. versions that i'm using are
Python: 2.7
cx_Oracle: cx_Oracle-5.1.3-11g.win-amd64-py2.7
instant client: 12.1.0.0
Windows: 7 Enterprise
I also found this kind of problem.
Look at "not a valid Win32 application" this sentence, so I decide to change cx_Oracle to cx_Oracle-5.1.3-11g.win-32-py2.7. Luckly, it does work.
I have just started looking & learning Python (on Ubuntu 14.04) using the website: http://learnpythonthehardway.org/book/ and http://www.codecademy.com/
Yesterday, I worked for an hour on a few scripts namely 1-4 and named them as ex1.py etc and they executed fine. Today, I have come back to carry on with a few more exercises and tested my first exercises only to find now I get "SyntaxError: invalid syntax" when attempting "python ex1.py" with or without .py I have tried "#!/usr/bin/python" in any script header also. The path/Dir I have been using to test my Python scripts in is simply 'Python' within my Home Dir. I checked the actual file permissions but that appears to make no difference.
I am not too sure if it's an OS setup issue; Python issue; or simply me. Python seems great, so any ideas on what I'm doing wrong? What has changed since yesterday to my python.py script files?
The problem is that you are in the Python interpreter, and not the Linux terminal. This is indicated both by the error messages you saw and by the >>> prompt.
Exit the interpreter by holding down control and pressing the D key. You will then be back in the Linux terminal and running a script will work the way you expect it to.
I am trying to run my celcius.py file but I don't know what to type in the command line...
When I type Python celcius.py it does not work:
I get the following message:
>>> python celcius.py
File "<stdin>", line 1
python celcius.py
^
SyntaxError: invalid syntax
>>>
When I open it the program with the Python IDLE GUI it runs the program and closes the program before I can see it. I read somewhere that it won't close if you run it from the command line.
You need to type "python celsius.py" in the windows command prompt, rather than the Python command prompt; this only works straight away if the Python directory is in your PATH. It probably isn't, so you need to use this instead: C:\Python27\python.exe celsius.py.
Because celsius for you is in the same folder as python, you can do this as well:
CD C:\Python27
python.exe celsius.py
In general, change the directory (CD) to where your file is stored, then run C:\Python27\python.exe <filename>
Double-clicking is generally easier in Windows, though, assuming it is set up to do that (it normally is unless you change it back)
There are a few ways of doing this.
WAY 1
step one: Open command prompt (go to start and type in "cmd") *NOTE: do NOT open python. if you see ">>>" in your command prompt window you opened python. This is bad.
step two: type in this: python "path\to\file\celcius.py" replacing path\to\file with the path (starting with the name of the folder that you're computer user is named. So for my computer that would be ben. So let's say my celcius.py is located on the desktop I would run python "Desktop\celcius.py" and hit <.enter.>. It looks like you have celcius.py in your python folder. Don't put it there. that's the system files for python itself. move it to your desktop or your documents folder. By the way, if you have truble using this, make sure you're system is set up to execute the python command. Go here for reference.
WAY 2
assuming you have python associated with the .py file in explorer, you can find the file and double-click on it.
WAY 3
open IDLE (you can usually find it in your list of programs in start). Open the python file through IDLE. This will show you the source code for your program. hit <.F5.>. F5 will execute the program from within the the IDLE shell.
You don't need to do this, just open the command prompt and type:
python path/to/your/file.py
Just make sure that python command is set in your environment PATH, check this