I'm trying to setup my website (on AWS). I have a t2.micro instance running on the us-east-1 region, and a Load Balancer (availability zones are us-east-1d and us-east-1c). I bought my domain using route 53, and also used the certificate manager to generate my SSL certificate (which I have attached to the load balancer).
My problem is that the load balancer seems to always send me to the root domain and it completely ignores the 2 subdomains I have setup on the EC2 instance. They were working perfectly until I created the ELB. So how can I get the subdomains working with the ELB? Or is this not the proper way of doing it? Can anyone point me to the right direction?
Thanks
You need to look at the application load balancer's rules. You can direct traffic based on the requested host name, or path. For example you can send app.example.com to one target group or blog.example.com to another group. Or you can route paths to individual target groups; for example example.com goes to your site, but example.com/cart goes to a microservice running your shopping cart.
Related
I have configured the AWS load balancer to secure my website, i.e. to resolve through "https". But when I use(https://www.schoolnskill.com), it gives
503 Service Temporarily Unavailable.
So I have followed the below steps to configure my environment.
I created a domain name in route53 and have been issued with a SSL/TLS certificate through AWS Certificate manager.
For my load balancer I set up listener for https:443 and attached the above certificate with it.
The security group for my ec2 instances allow http and https requests (although I believe the load balancer ec2 target will communicate using http).
I have attached a screenshot with the summary of the configuration.
Then in the ROUTE 53, I edited the 'A' record of 'www.schoolnskill.com'. Below are the changes I made.
Alias:- yes
Alias target:- chosen the application LB
Routing policy:- simple
Then save the settings.
I can see that whenever I type 'http://www.schoolnskill.com', it is redirected as 'https://www.schoolnskill.com'
Health_CHK
Thank you,
The problem was the availability zones. The AZ of my load balancer was different from that of EC2 instance. I matched the AZ of ALB to my EC2, and it worked.
Thank you,
I have a Wordpress website with a GoDaddy domain being hosted on SiteGround using the nameservers. I am looking to switch to a React App which is currently running on an EC2 instance in AWS. I want to run the ec2 instance (aka the react app) on a subdomain like beta.domain.com inside SiteGround while still keeping the Wordpress website since its a part of my business. I tried creating a subdomain in SiteGround and then pointed it to my EC2 instance elastic IP (the public ipv4) using an A record but it is showing "This site can't be reached" error once I go to beta.domain.com.
What am I doing wrong? How do I run the EC2 instance in a subdomain hosted in SiteGround?
EDIT
Thank you, everyone, for your help. The problem was the SSL certificate for the HTTPS. The website wasn't coming on due to the HTTPS setup on the Nginx on the EC2 instance. After I put in the details of the certificate it runs properly with just the A record.
Any public address in the AWS environment are never accessible from outside the security groups. Even if you try to ssh from your own machine and if it is not in the inbound rule of the security group of your EC2 instance. I feel there are 3 ways out here.
1.) Adding an all traffic rule in your EC2 Security group inbound rule. This is not recommended as it opens all traffic to your machine.(additional tip: set up secure ssh key with the machine)
2.) Use an ELB to route traffic to your EC2 instance. ELB will provide you with a DNS record which can be used an a CNAME in godaddy(Point 3 shows how to map it as a A record in GoDaddy)
3.) Using Route 53 Hosted Zones - You could delegate your DNS to be managed by AWS Route 53. This way all traffic will be routed to your machine by AWS R53.
Another tip: Elastic IP can also be used which are like permanent static IP Addresses accessible from across internet. This provided a secure communication method to your instances.
Let me know what could be the favorable solution for you. I could help you out further
If you have registered your domain name with Goaddy, you can create subdomain in Godaddy as CNAME and point it to static IP address of your ec2 instance. Here is a link to guide you.
Also your main domain name will point to your Wordpress website on SiteGround.
Now that you have EC2 instance, you can also run a wordpress site on that instance if you like.
I have a website that I have hosted on an EC2 instance that runs on port 3000. (e.g. 3.27.83.19:3000 - assuming the IP address of the EC2 instance is 3.27.83.19)
I have a domain that I have already bought mydomain.com through AWS that I already see in Hosted Zones.
How can I set-up Route53 so that when someone hits "mydomain.com", it takes them to 3.27.83.19:3000 rather than 3.27.83.19
Thanks!
point domain to instance ip
To point example.com to 3.27.83.19 you simply need to create an A record in route53
point domain to load balancer
To access the website running port 3000 on an EC2 instance through https://example.com, you need a service that accepts traffic on https://example.com and then forward the traffic to the EC2 instance on port 3000. You can easily do it with an AWS application load balancer. I like this approach.
There are many benefits using an application load balancer. The important one is that you can configure the SSL certificate easily. The application load balancer also supports host based routing which allows you to host multiple websites.
If you are looking for less expensive solutions, you can also go for setting up an nginx proxy inside the ec2 instance. I personally don't like this approach because you will need to configure SSL at the application level.
https://aws.amazon.com/premiumsupport/knowledge-center/public-load-balancer-private-ec2/
Hope this helps.
I've set up my application on AWS Elastic Beanstalk. I added a load balancer and pointed a CNAME for 'www' to it. But now I need to get root pointed there too. I can't use Route53 and use AWS nameservers because the client wants to use theirs. How can I get root to my app? Can I redirect the traffic? The tech lead I'm working with suggested setting up a server to do the redirect?
Since AWS ELB's only offer DNS Record (Instead of IPs) you need to use a CNAME mapping. However with DNS, CNAMEs do not allow root domain to point to it. To overcome this AWS has provided Alias Records (Custom implementation to AWS) to point root domain to ELBs.
If your client want to use their nameservers still you can use, AWS Route53 in between to solve this with following steps.
First create a Public Hosted Zone in Route53 for your domain.
Then create a record set inside the Hosted Zone for the root domain to point to the ELB with Type = A - IPv4 Address, Alias = Yes with ELB CNAME as for the Alias value.
In the external domain management service, create a NS record to point the root domain to Route53 nameservers.
Then when the DNS resolution happens, the root DNS query will first go to external nameservers(Managed outside of Route53) and then it will be forwarded to route53 where it will resolve the ELBs IP address and sent back.
You can set up a machine with a single static IP address that does nothing but redirect requests to the www host. Then you can put an A record on the bare domain at the apex of the DNS zone pointing to that machine.
There is at least one service, http://wwwizer.com/naked-domain-redirect, that will do this for you. (I'm not affiliated with this service, but it appears to do what it claims and will serve your purpose. There are probably others like it.)
Ideally, though, you'd persuade your client to change the authoritative nameservers to point to a Route 53 hosted zone that you create for them. They are still the registrant and "owner" of their domain, and can take control back from you by simply changing the nameservers to something else.
I generally persuade clients with the explanation that our load balancer infrastructure is integrated with the DNS servers so that if a balancer node fails, or we need to add or scale up capacity, or experience a traffic surge or DDoS event, the load balancer system will automatically update the DNS records for their domain to try to mitigate the issue and keep the site up. To do otherwise is to do things in such a way that removes those layers of redundancy.
Ideally, you can set up a apache server with a static IP, and install a free SSL certificate on that web server at first.
Second you need to redirect your root domain name request to AWS ELB.
Then go to your DNS management and set up your apex point to the server you created.
It is now possible to setup a Network Load Balancer and allocate one or more Elastic IP Addresses to it (one per Availability Zone). The Network Load Balancer can have an Application Load Balancer as a target. The Application Load Balancer would target the Elastic Beanstalk. An A record can then be created in the external DNS for each Elastic IP Address of the Network Load Balancer.
If you don't need the functionality that the Application Load Balancer provides, you may be able to target Elastic Beanstalk or whatever application directly from the Network Load Balancer.
Since AWS ELB's only offer DNS Record (Instead of IPs) you need to use a CNAME mapping. However with DNS, CNAMEs do not allow root domain to point to it. To overcome this AWS has provided Alias Records (Custom implementation to AWS) to point root domain to ELBs.
If your client want to use their nameservers still you can use, AWS Route53 in between to solve this with following steps.
First create a Public Hosted Zone in Route53 for your domain.
Then create a record set inside the Hosted Zone for the root domain to point to the ELB with Type = A - IPv4 Address, Alias = Yes with ELB CNAME as for the Alias value.
Right now I have two domains registered in Route 53: exampleABC.com and ex.com.
exampleABC.com routes to an Elastic IP connected to an EC2 instance. Works.
I want ex.com to route to the same instance so that a user going to "ex.com" is directed to "exampleABC.com.
I set up an Elastic Load Balancer and Target Group whose registered target is the EC2 instance for exampleABC.com (the target group is connected to the ELB).
I created an A record Alias in "ex.com" Hosted Zone that targets the ELB.
Not sure what to do after this. My thought is that ex.com should now route to exampleABC.com, but the site loads forever without going anywhere.
Please assist
Figured it out! Had to create an S3 bucket for "ex.com" and redirect traffic to "exampleABC.com" then add an A-record alias in "ex.com" that pointed to the S3 bucket.