I'm working in notepad++, and using its find-replace dialog box.
NP++ documentation states: Notepad++ regular expressions use the Boost regular expression library v1.70, which is based on PCRE (Perl Compatible Regular Expression) syntax. ref: https://npp-user-manual.org/docs/searching
What I'm trying to do should be simple, but I'm a regex novice, and after 2-3 hrs of web searches and playing with online regex testers, I give up.
I want to replace all single quotes ' with double quote " , but if and only if the ' is to the RIGHT of one or more #, ie inside a python comment.
For example,
list1 = ['apple','banana','pear'] # All 'single quotes' to LEFT of # remained unchanged.
list2 = ['tomato','carrot'] # All 'single quotes' to RIGHT of one or more # are replaced
# # with "double quotes", like this.
The np++ file is over 800 lines, manual replacement would be tedious & error prone. Advice appreciated.
This regex should do what you want:
(^[^#]*#|(?<!^)\G)[^'\n]*\K'
It looks for a ' which is preceded by either
^[^#]*# : start of line and some number of non-# characters followed by a #; or
(?<!^)\G : the start of line or the end of the previous match (\G), with a negative lookbehind for start of line (?<!^), meaning that it only matches at the end of the previous match
and then some number of non ' or newline (to prevent the match wrapping around the end of the previous line) characters [^'\n]*.
We then use \K to reset the match, so that everything before that is discarded from the match, and the regex only matches the '.
That can then be replaced with ".
Demo on regex101
Update
You can avoid matching apostrophes within words by only matching ones that are either preceded or followed by a non-word character:
(^[^#]*#|(?<!^)\G)[^'\n]*\K('(?=\W)|(?<=\W)')
Demo on regex101
Update 2
You can also deal with the case where there are # characters in strings by qualifying the first part of the regex with the requirement for there to be matched pairs of quotes beforehand:
(?:^[^'#]*(?:'[^']*'[^#']*)*[^'#]*#|(?<!^)\G)[^'\n]*\K(?:'(?=\W)|(?<=\W)')
Demo on regex101
I've got a CSV file with lines like:
57,13,"Bob, Bill and Susan",Student,Club,Funded,64,3200^M
I need them to look like
57,13,Bob-Bill-and-Susan,Student,Club,Funded,64,3200
I'm using vim regexes. I've broken it down into 4 steps:
Remove ^M and insert newlines:
:%s:<ctrl-V><ctrl-M>:\r:g`
Replace all with -:
:%s: :\-:g
Remove commas between quotes: Need help here.
Remove quotes:
:%s:\"\([^"]*\)\":\1:g
How do I remove commas between quotes, without removing all commas in the file?
Something like this?
:%s:\("\w\+\),\(\w\+"\):\1 \2:g
My preferred solution to this problem (removing commas inside quoted regions) is to use replacements with an expression instead of trying to get this done in one regex.
To do this you need to prepend you replacement with \= to get the replacement treated as a vim expression. From here you can extract just the parts between quotes and then manipulate the the matched part separately. This requires having two short regexes instead of one complicated one.
:%s/".\{-}"/\=substitute(submatch(0), ',', '' , 'g')/g
So ".\{-}" matches anything in quotes (non greedy) and substitute(submatch(0), ',', '' , 'g') takes what was matched and removes all of the commas and its return value is used as the actual replacement.
The relevant help page is :help sub-replace-special.
As for the other parts of your question. Step 1 is essentially trying to remove all carriage returns since the file format is actually the dos file format. You can remove them with the dos2unix program.
In Step 2 escaping the - in the replacement is unnecessary. So the command is just
:%s/ /-/g
In Step 4, you have an overly complicated regex if all you want to do is remove quotes. Since all you need to do is match quotes and remove them
:%s/"//g
:%s:\("\w*\)\(,\)\(.*"\):\1\3:g
example: "this is , an, example"
\("\w*\) match start of " every letter following qoutes group \1 for back reference
\(,\) capture comma group \2 for back reference
(.*"\) match every other character upto the second qoute ->group 3 for backreference
:\1\3: only include groups without comma, discard group 2 from returned string which is \2
:%s:\("\w*\)\(,\)\(.*"\):\1\3:g removes commas
I am using Notepad++ to find (".*)"(.*) and replace it with \1\"\2 but it doesn't seem to work. I don't know why.
Example:
Someone said "My name is "sean""
I want it to be:
Someone said "My name is \"sean\""
Edit: In my case the closing quote is always on the end of line so will (".*)"(.*"$) work?
Edit2: Also the first quote is preceded with a comma so I will use (,".*)"(.*"$) though it may not work in some cases but I think it will work with my file.
Now there is the problem with the replace it doesn't add \" it just add some space.
It should work... you just need to do a little fixing...
The Find what regex should be ("[^"]*)("\w*)(")([^"]*")
The Replace with expression should be \1\\\2\\\3\4
Make sure you select the Search Mode to be "Regular expression"
Explanation...
This is quite tricky - I've assumed that the quoted text WITHIN quotes is just a single word. If you assume something else it becomes very hard to pin down.
You need to find a
" followed by
[^"]* - any number of characters that are NOT a " and then
("\w*)(") - a quoted word, and then finally
([^"]*") - any additional number of non-quote characters + a final quote
This is important because regular expression matching is greedy by default, and a .* would continue to match all characters, including " until the end of the string (see link )
In the replacement string you need to have \\ to represent a single \
I am trying to match keys in JSON of this type:
define({
key1: "some text: and more",
key2 : 'some text ',
key3: ": more some text",
key4: 'some text:'
});
with this regexp (?<=\s|{|,)\s*(\w+)\s*:\s?[\"|\']/g. But currently it's matching the last text: also that should be ignore.
An example could be seen here
Could you give me hint how to fix this regex so it matches only keys.
How about this shorter regex:
(?m)^[ ]*([^\r\n:]+?)\s*:
In the demo, look at the Group 1 captures in the right pane.
(?m) allows the ^ to match at the beginning of each line
^ asserts that we are positioned at the beginning of the line
[ ]* eats up all the space characters
([^\r\n:]+?) lazily matches all characters that are colons : or newlines, and capture them to Group 1 (this is what we want), up to...
\s*: matches optional whitespace characters and a colon
I wouldn't suggest parsing JSON using regular expressions. There are small libraries for that, some even header only and with very convenient licensing terms (like rapidjson, which I'm using rightn ow).
But if you really want to, the following expression should find your key/value pairs (note that I'm using Perl, mostly for nice syntax highlighting):
(\w+)\s*:\s*('[^']*'|"[^"]*"|[+\-]?\d+(?:.\d+)?)
Keep in mind that this won't work properly with escaped quotes inside your values or not properly enclosed strings.
(\w+) will match the full key.
\s* matches any or no sequence of space characters.
: is really just a direct match.
'[^']*' will match any characters enclosed by ' (same for the second part of that bracket).
[+\-]?\d+(?:.\d+)? will match any number (with or without decimals).
Edit: Since others provided nice and easy to see online demos, here's mine.
Try this regular expression:
text is matched initially because it is considered as a key.
(\w+)\s*:\s*(["']).+\2,?
Demo
I have a value like this:
"Foo Bar" "Another Value" something else
What regex will return the values enclosed in the quotation marks (e.g. Foo Bar and Another Value)?
In general, the following regular expression fragment is what you are looking for:
"(.*?)"
This uses the non-greedy *? operator to capture everything up to but not including the next double quote. Then, you use a language-specific mechanism to extract the matched text.
In Python, you could do:
>>> import re
>>> string = '"Foo Bar" "Another Value"'
>>> print re.findall(r'"(.*?)"', string)
['Foo Bar', 'Another Value']
I've been using the following with great success:
(["'])(?:(?=(\\?))\2.)*?\1
It supports nested quotes as well.
For those who want a deeper explanation of how this works, here's an explanation from user ephemient:
([""']) match a quote; ((?=(\\?))\2.) if backslash exists, gobble it, and whether or not that happens, match a character; *? match many times (non-greedily, as to not eat the closing quote); \1 match the same quote that was use for opening.
I would go for:
"([^"]*)"
The [^"] is regex for any character except '"'
The reason I use this over the non greedy many operator is that I have to keep looking that up just to make sure I get it correct.
Lets see two efficient ways that deal with escaped quotes. These patterns are not designed to be concise nor aesthetic, but to be efficient.
These ways use the first character discrimination to quickly find quotes in the string without the cost of an alternation. (The idea is to discard quickly characters that are not quotes without to test the two branches of the alternation.)
Content between quotes is described with an unrolled loop (instead of a repeated alternation) to be more efficient too: [^"\\]*(?:\\.[^"\\]*)*
Obviously to deal with strings that haven't balanced quotes, you can use possessive quantifiers instead: [^"\\]*+(?:\\.[^"\\]*)*+ or a workaround to emulate them, to prevent too much backtracking. You can choose too that a quoted part can be an opening quote until the next (non-escaped) quote or the end of the string. In this case there is no need to use possessive quantifiers, you only need to make the last quote optional.
Notice: sometimes quotes are not escaped with a backslash but by repeating the quote. In this case the content subpattern looks like this: [^"]*(?:""[^"]*)*
The patterns avoid the use of a capture group and a backreference (I mean something like (["']).....\1) and use a simple alternation but with ["'] at the beginning, in factor.
Perl like:
["'](?:(?<=")[^"\\]*(?s:\\.[^"\\]*)*"|(?<=')[^'\\]*(?s:\\.[^'\\]*)*')
(note that (?s:...) is a syntactic sugar to switch on the dotall/singleline mode inside the non-capturing group. If this syntax is not supported you can easily switch this mode on for all the pattern or replace the dot with [\s\S])
(The way this pattern is written is totally "hand-driven" and doesn't take account of eventual engine internal optimizations)
ECMA script:
(?=["'])(?:"[^"\\]*(?:\\[\s\S][^"\\]*)*"|'[^'\\]*(?:\\[\s\S][^'\\]*)*')
POSIX extended:
"[^"\\]*(\\(.|\n)[^"\\]*)*"|'[^'\\]*(\\(.|\n)[^'\\]*)*'
or simply:
"([^"\\]|\\.|\\\n)*"|'([^'\\]|\\.|\\\n)*'
Peculiarly, none of these answers produce a regex where the returned match is the text inside the quotes, which is what is asked for. MA-Madden tries but only gets the inside match as a captured group rather than the whole match. One way to actually do it would be :
(?<=(["']\b))(?:(?=(\\?))\2.)*?(?=\1)
Examples for this can be seen in this demo https://regex101.com/r/Hbj8aP/1
The key here is the the positive lookbehind at the start (the ?<= ) and the positive lookahead at the end (the ?=). The lookbehind is looking behind the current character to check for a quote, if found then start from there and then the lookahead is checking the character ahead for a quote and if found stop on that character. The lookbehind group (the ["']) is wrapped in brackets to create a group for whichever quote was found at the start, this is then used at the end lookahead (?=\1) to make sure it only stops when it finds the corresponding quote.
The only other complication is that because the lookahead doesn't actually consume the end quote, it will be found again by the starting lookbehind which causes text between ending and starting quotes on the same line to be matched. Putting a word boundary on the opening quote (["']\b) helps with this, though ideally I'd like to move past the lookahead but I don't think that is possible. The bit allowing escaped characters in the middle I've taken directly from Adam's answer.
The RegEx of accepted answer returns the values including their sourrounding quotation marks: "Foo Bar" and "Another Value" as matches.
Here are RegEx which return only the values between quotation marks (as the questioner was asking for):
Double quotes only (use value of capture group #1):
"(.*?[^\\])"
Single quotes only (use value of capture group #1):
'(.*?[^\\])'
Both (use value of capture group #2):
(["'])(.*?[^\\])\1
-
All support escaped and nested quotes.
I liked Eugen Mihailescu's solution to match the content between quotes whilst allowing to escape quotes. However, I discovered some problems with escaping and came up with the following regex to fix them:
(['"])(?:(?!\1|\\).|\\.)*\1
It does the trick and is still pretty simple and easy to maintain.
Demo (with some more test-cases; feel free to use it and expand on it).
PS: If you just want the content between quotes in the full match ($0), and are not afraid of the performance penalty use:
(?<=(['"])\b)(?:(?!\1|\\).|\\.)*(?=\1)
Unfortunately, without the quotes as anchors, I had to add a boundary \b which does not play well with spaces and non-word boundary characters after the starting quote.
Alternatively, modify the initial version by simply adding a group and extract the string form $2:
(['"])((?:(?!\1|\\).|\\.)*)\1
PPS: If your focus is solely on efficiency, go with Casimir et Hippolyte's solution; it's a good one.
A very late answer, but like to answer
(\"[\w\s]+\")
http://regex101.com/r/cB0kB8/1
The pattern (["'])(?:(?=(\\?))\2.)*?\1 above does the job but I am concerned of its performances (it's not bad but could be better). Mine below it's ~20% faster.
The pattern "(.*?)" is just incomplete. My advice for everyone reading this is just DON'T USE IT!!!
For instance it cannot capture many strings (if needed I can provide an exhaustive test-case) like the one below:
$string = 'How are you? I\'m fine, thank you';
The rest of them are just as "good" as the one above.
If you really care both about performance and precision then start with the one below:
/(['"])((\\\1|.)*?)\1/gm
In my tests it covered every string I met but if you find something that doesn't work I would gladly update it for you.
Check my pattern in an online regex tester.
This version
accounts for escaped quotes
controls backtracking
/(["'])((?:(?!\1)[^\\]|(?:\\\\)*\\[^\\])*)\1/
MORE ANSWERS! Here is the solution i used
\"([^\"]*?icon[^\"]*?)\"
TLDR;
replace the word icon with what your looking for in said quotes and voila!
The way this works is it looks for the keyword and doesn't care what else in between the quotes.
EG:
id="fb-icon"
id="icon-close"
id="large-icon-close"
the regex looks for a quote mark "
then it looks for any possible group of letters thats not "
until it finds icon
and any possible group of letters that is not "
it then looks for a closing "
I liked Axeman's more expansive version, but had some trouble with it (it didn't match for example
foo "string \\ string" bar
or
foo "string1" bar "string2"
correctly, so I tried to fix it:
# opening quote
(["'])
(
# repeat (non-greedy, so we don't span multiple strings)
(?:
# anything, except not the opening quote, and not
# a backslash, which are handled separately.
(?!\1)[^\\]
|
# consume any double backslash (unnecessary?)
(?:\\\\)*
|
# Allow backslash to escape characters
\\.
)*?
)
# same character as opening quote
\1
string = "\" foo bar\" \"loloo\""
print re.findall(r'"(.*?)"',string)
just try this out , works like a charm !!!
\ indicates skip character
My solution to this is below
(["']).*\1(?![^\s])
Demo link : https://regex101.com/r/jlhQhV/1
Explanation:
(["'])-> Matches to either ' or " and store it in the backreference \1 once the match found
.* -> Greedy approach to continue matching everything zero or more times until it encounters ' or " at end of the string. After encountering such state, regex engine backtrack to previous matching character and here regex is over and will move to next regex.
\1 -> Matches to the character or string that have been matched earlier with the first capture group.
(?![^\s]) -> Negative lookahead to ensure there should not any non space character after the previous match
Unlike Adam's answer, I have a simple but worked one:
(["'])(?:\\\1|.)*?\1
And just add parenthesis if you want to get content in quotes like this:
(["'])((?:\\\1|.)*?)\1
Then $1 matches quote char and $2 matches content string.
All the answer above are good.... except they DOES NOT support all the unicode characters! at ECMA Script (Javascript)
If you are a Node users, you might want the the modified version of accepted answer that support all unicode characters :
/(?<=((?<=[\s,.:;"']|^)["']))(?:(?=(\\?))\2.)*?(?=\1)/gmu
Try here.
echo 'junk "Foo Bar" not empty one "" this "but this" and this neither' | sed 's/[^\"]*\"\([^\"]*\)\"[^\"]*/>\1</g'
This will result in: >Foo Bar<><>but this<
Here I showed the result string between ><'s for clarity, also using the non-greedy version with this sed command we first throw out the junk before and after that ""'s and then replace this with the part between the ""'s and surround this by ><'s.
From Greg H. I was able to create this regex to suit my needs.
I needed to match a specific value that was qualified by being inside quotes. It must be a full match, no partial matching could should trigger a hit
e.g. "test" could not match for "test2".
reg = r"""(['"])(%s)\1"""
if re.search(reg%(needle), haystack, re.IGNORECASE):
print "winning..."
Hunter
If you're trying to find strings that only have a certain suffix, such as dot syntax, you can try this:
\"([^\"]*?[^\"]*?)\".localized
Where .localized is the suffix.
Example:
print("this is something I need to return".localized + "so is this".localized + "but this is not")
It will capture "this is something I need to return".localized and "so is this".localized but not "but this is not".
A supplementary answer for the subset of Microsoft VBA coders only one uses the library Microsoft VBScript Regular Expressions 5.5 and this gives the following code
Sub TestRegularExpression()
Dim oRE As VBScript_RegExp_55.RegExp '* Tools->References: Microsoft VBScript Regular Expressions 5.5
Set oRE = New VBScript_RegExp_55.RegExp
oRE.Pattern = """([^""]*)"""
oRE.Global = True
Dim sTest As String
sTest = """Foo Bar"" ""Another Value"" something else"
Debug.Assert oRE.test(sTest)
Dim oMatchCol As VBScript_RegExp_55.MatchCollection
Set oMatchCol = oRE.Execute(sTest)
Debug.Assert oMatchCol.Count = 2
Dim oMatch As Match
For Each oMatch In oMatchCol
Debug.Print oMatch.SubMatches(0)
Next oMatch
End Sub