I'm trying to update debian 9 and virtualbox can't be upgrated...
I'm getting the error:
vboxdrv.sh: failed: Cannot unload module vboxdrv.
Does anybody has any idea ?
$ apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following packages will be upgraded:
virtualbox-5.1
1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/66.9 MB of archives.
After this operation, 6,144 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Reading changelogs... Done
Preconfiguring packages ...
(Reading database ... 261193 files and directories currently installed.)
Preparing to unpack .../virtualbox-5.1_5.1.36-122089~Debian~stretch_amd64.deb ...
dpkg: warning: subprocess old pre-removal script returned error exit status 1
dpkg: trying script from the new package instead ...
dpkg: error processing archive /var/cache/apt/archives/virtualbox-5.1_5.1.36-122089~Debian~stretch_amd64.deb (--unpack):
subprocess new pre-removal script returned error exit status 1
A copy of VirtualBox is currently running. Please close it and try again.
Please note that it can take up to ten seconds for VirtualBox to finish running.
Created symlink /etc/systemd/system/multi-user.target.wants/vboxdrv.service → /lib/systemd/system/vboxdrv.service.
Created symlink /etc/systemd/system/multi-user.target.wants/vboxballoonctrl-service.service → /lib/systemd/system/vboxballoonctrl-service.service.
Created symlink /etc/systemd/system/multi-user.target.wants/vboxautostart-service.service → /lib/systemd/system/vboxautostart-service.service.
Created symlink /etc/systemd/system/multi-user.target.wants/vboxweb-service.service → /lib/systemd/system/vboxweb-service.service.
vboxdrv.sh: failed: Cannot unload module vboxdrv.
There were problems setting up VirtualBox. To re-start the set-up process, run
/sbin/vboxconfig
as root.
Errors were encountered while processing:
/var/cache/apt/archives/virtualbox-5.1_5.1.36-122089~Debian~stretch_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
Seen in the error messages you posted:
A copy of VirtualBox is currently running. Please close it and try again.
Please note that it can take up to ten seconds for VirtualBox to finish running.
Did you try that ?
Related
After pruning with the command "docker system prune -a" nodejs wont build anymore beacuse trix.css is missing. I am assuming this was probably deleted while pruning. How can I resolve this error (see the error below)? Why is it not created again while building the container again since the file is in the docker file.
Required path doesn't exist: /code/bower_components/trix/dist/trix.css trix
[13:57:39] 'vendorcss' errored after 1.63 ms
[13:57:39] Error: Promise rejected without Error
at Domain.onError (/usr/local/lib/node_modules/gulp/node_modules/async-done/index.js:49:15)
at Object.onceWrapper (events.js:315:30)
at emitOne (events.js:116:13)
at Domain.emit (events.js:211:7)
at Domain._errorHandler (domain.js:134:21)
at process._fatalException (bootstrap_node.js:375:33)
[13:57:39] 'staging' errored after 41 ms
ERROR: Service 'nodejs' failed to build: The command '/bin/sh -c gulp staging' returned a non-
zero code: 1
Usually I use this command : "sudo docker-compose -f docker-compose-staging.yml build nodejs" when I want to build the container again. I am very new to this and would be greatfull for some help.
For me, this was the case:
The issue exists because trix.css was removed in the latest version. It has nothing to do with docker system prune as far as I understand.
You can compare the two versions here: https://github.com/basecamp/trix/compare/1.3.1...v2.0.0
Basically, in order to fix this issue, you need to do
yarn install
yarn build
inside bower_components. This is suggested in the official updated README of the trix repository: https://github.com/basecamp/trix.
Once done with that, you will have trix.css and trix.umd.min.js files for your perusal.
To start Code and Compile C++, must install a compiler. For my case, it is MSYS2 through which MinGW is available. According to the installation guild mentioned on the website, I installed the software without any errors. Now I was supposed to update the package database and base packages by entering pacman -Sys but it has shown an error
error: failed to synchronize all databases (unable to lock database)
After searching online for a solution I found that deleting/removing the db.lck will work, for that, I used this command rm /var/lib/pacman/db.lck
but it showed another error. Right now there is no solution to this on the internet.
I've also pasted the terminal output of MSYS2 MSYS for refernce.
$ pacman -Sys
:: Synchronizing package databases...
error: failed to synchronize all databases (unable to lock database)
VIRAT#DESKTOP-97BS0AB MSYS ~
$ rm /var/lib/pacman/db.lck
rm: cannot remove '/var/lib/pacman/db.lck': No such file or directory
VIRAT#DESKTOP-97BS0AB MSYS ~
$ pacman -S --needed base-devel mingw-w64-x86_64-toolchain
error: failed to init transaction (unable to lock database)
error: could not lock database: Permission denied
VIRAT#DESKTOP-97BS0AB MSYS ~
$ pacman -Su
error: failed to init transaction (unable to lock database)
error: could not lock database: Permission denied
VIRAT#DESKTOP-97BS0AB MSYS ~
$
As I found there 2 solutions for this error. Try both :
Solution : 1
C:\Users\your_account_name\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\MSYS2 64bit
Run "MSYS2 MSYS" as administrator
Run the command : pacman -Syu
Solution - 2 :
C:\msys64\var\lib\pacman ( Go to the downloaded folder)
Delete the "db.lck" file
RESOURCES :
For solution 1 : Mr. Padro's (https://stackoverflow.com/users/18910613/pedro) solution helped me.
For solution 2
https://www.reddit.com/r/archlinux/comments/nvrny2/pacman_error_failed_to_synchronize_all_databases/
Try to run MSYS app under administrator privilege... worked for me
include sympy python packages into Chaquopy:
I started with the example python provided by Chaquopy available at github (https://github.com/chaquo/chaquopy) for Android studio 3.0.1.
Than I created 2 wheel files from the sympy source () files, based on python 3.6.3, see the below files that wheel generated:
"mpmath-1.0.0-py3-none-any.whl"
"sympy-1.1.1-py3-none-any.whl"
I tried to install the above files into the build.gradle of the demo example from 1., for testing purposes I tried some of there own wheel files (that process succeeded), but could not install my own wheel files.
I am fairly certain that the local wheel files that I generated are placed in the proper directory, because if I change the directory in the gradle file it complains that it cannot find the file.
I included the wheel files in the build.gradle(Module:app) file as follows:
python {
// Enable and edit the following line if "python" is not on your PATH.
// buildPython "C:/Python27/python.exe"
version "3.6.3"
// Android UI demo
pip {
install "Pygments==2.2.0" // Also used in Java API demo
}
pip {
install "wheels/mpmath-1.0.0-py3-none-any.whl"
// install "wheels/sympy-1.1.1-py3-none-any.whl"
// install "numpy==1.9.2"
// install "numpy==1.14.0"
}
When created the build gradle generates the following error:
sympy-1.1.1-py3-none-any.whl is not a supported wheel on this platform.
Exit status 1
:app:generatePy2DebugPythonRequirements FAILED
FAILURE: Build failed with an exception.
What went wrong:
Execution failed for task ':app:generatePy2DebugPythonRequirements'.
Process 'command 'python'' finished with non-zero exit value 1
Try:
Run with --stacktrace option to get the stack trace. Run with --info or --debug option to get more log output.
Get more help at https://help.gradle.org
BUILD FAILED in 2s
7 actionable tasks: 1 executed, 6 up-to-date
Does anyone have an idea what could be wrong?
sympy and mpmath have now been added to the Chaquopy wheel repository (https://github.com/chaquo/chaquopy/issues/20), so you don't need to build your own anymore.
Did some further investigation and did see that I somehow compiled for Py2, while my wheel files where version 3 changing this resulted in a correct executable.
It did run into a different issue, while the mpmath module could be imported into the interactive python console (part of the demo app), the sympy module gave an error:
ModuleNotFoundError: no module named 'distutils'
Let me know if anyone ran into a similar problem!
k#k-Inspiron-5537:~$ sudo apt-get install gcc
[sudo] password for k:
Reading package lists... Done
Building dependency tree
Reading state information... Done
gcc is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 291 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up matlab-support (0.0.19) ...
No default Matlab path found. Exiting.
dpkg: error processing package matlab-support (--configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
matlab-support
E: Sub-process /usr/bin/dpkg returned an error code (1)
k#k-Inspiron-5537:~$ gcc -v
The program 'gcc' is currently not installed. You can install it by typing:
sudo apt-get install gcc
Any idea ??
Matlab-support requires matlab to be installed. Do you have mathlab installed? install: https://help.ubuntu.com/community/MATLAB
I have trouble on updating tizen-2.1 on my test device
I follow manual step by step, but some errors when I use lthor tool.
Can you give me some insight?
my environment
current tizen version on test device => 2.0
ubuntu 13.04 (on vmware 9)
modemmanager off
Error Message:
line 345: failed to read signature bytes
line 629: handshake failed
line 958: failed to open port (null)
Unfortunatelly, sometimes it's needed to uninstall modemmanger at all:
sudo apt-get purge modemmanager
Also VMWare may be at the bottom of your problem.
please follow these steps
I updated my device by following these steps.
https://wiki.tizen.org/wiki/Flash_Tizen_2.1_Image_to_Reference_Device