I have just installed clojure 1.9 on my mac via Homebrew.
As expected I get 2 links in /usr/local/bin to the actual executables
clojure# -> ../Cellar/clojure/1.9.0.358/bin/clojure
clj# -> ../Cellar/clojure/1.9.0.358/bin/clj
running clojure from the command line works
$ clojure
Clojure 1.9.0
user=>
but for not for the command line tools
$ clj
zsh: command not found: clj.sh
both executable files exist
$ ls Cellar/clojure/1.9.0.358/bin
clj* clojure*
I've tried uninstalling clojure with brew uninstall and have deleted the cached version of clojure-tools-1.9.0.358.tar.gz in my ~/Library/Caches/Homebrew/ directory.
Installing it again was successful
$ brew install clojure
==> Downloading https://download.clojure.org/install/clojure-tools-1.9.0.358.tar.gz ####### 100.0%
==> ./install.sh /usr/local/Cellar/clojure/1.9.0.358
🍺 /usr/local/Cellar/clojure/1.9.0.358: 9 files, 19.4MB, built in 31 seconds
but still the same error.
Interestingly if I use the Finder to locate the file and double click on it, a new terminal window opens up and things seem to work.
Last login: Tue Mar 6 10:35:48 on ttys002
/usr/local/Cellar/clojure/1.9.0.358/bin/clj ; exit;
$ /usr/local/Cellar/clojure/1.9.0.358/bin/clj ; exit;
Clojure 1.9.0
user=>
Any ideas please on why this executable won't run directly from the command line?
Many thanks
The problem was that I'd set up an alias for clj in my shell profile file which referenced a shell script called clj.sh that I'd written but which no longer exists - hence why nothing happened except an error message.
Removing the alias from the shell profile file corrected the problem.
Related
I'm actually using git bash instead of default windows command shell (cmd).But I cannot run 'lein repl' in git bash. It doesn't show anything and I must press crtl + c to regain control.
Any suggestion?
Thank you.
-- EDIT
I'm running lein instead of lein.bat because I added alias lein=lein.bat in my .bashrc, so I don't think it is a problem.
lein run is working fine in Git Bash and leiningen works fine in windows cmd. The problem is explicity with lein repl.
When I run which lein I got which: no lein in ([MY-PATH-VAR])
First Check if you have installed lein.bat in windows using below command in command prompt
lein --version
Then if lein is available, then in your git bash type the below command
alias lein='lein.bat'
Thein run your lein command it will work for sure...
I had exactly the same problem as ThomasH where calling lein repl from an Emacs shell would get me the introductory messages and a prompt ...
nREPL server started on port 55801 on host 127.0.0.1 - nrepl://127.0.0.1:55801
REPL-y 0.4.4, nREPL 0.8.3
Clojure 1.10.1
Java HotSpot(TM) 64-Bit Server VM 15.0.2+7-27
Docs: (doc function-name-here)
(find-doc "part-of-name-here")
Source: (source function-name-here)
Javadoc: (javadoc java-object-or-class-here)
Exit: Control+D or (exit) or (quit)
Results: Stored in vars *1, *2, *3, an exception in *e
... but seemingly freeze when I try to get it to do anything, like:
user=> (+ 1 2 3 8)
When I open up the Task Manager, I could see the underlying Java program continuously at ~30% CPU for no apparent reason, and the only way I could reliably get out of it was to end the Java process from there.
But through a lot of effort, I finally figured out that the reason this was happening was a shell environment variable TERM=emacs. Whenever you call M-x shell, the function comint-term-environment puts it in for you.
(According to the source code in comint.el, it's done so that it "lets us specify a width". And it also mentions that "Some programs that use terminfo get very confused if TERM is not a valid terminal type". So there you have it - it looks like Java is one of those.)
To resolve this, you can set the variable system-uses-terminfo to 't before calling M-x shell.
(setq system-uses-terminfo t)
After having done so, Java is now finally responsive and I can evaluate things in the repl.
user=> (+ 1 2 3 8)
14
If you have this problem and got fortunate enough to stumble here, I hope this helps! =D
The following worked for me to get this running in Git bash on Windows 10. When I originally got this working, it was freezing, but this post helped me figure out how to fix by including winpty.
If you haven't added the lein.bat file to your Path variable, then do steps 1-3. Otherwise, skip to 4. In the System Properties -> Advanced -> Environment Variables area, select the Path variable
Click Edit and add the directory containing lein.bat to this. Mine was C:\Program Files (x86)\lein - lein.bat was stored inside the lein folder
Click OK until you close out of the prompts
Confirm the update worked by opening a command prompt (windows key, then type cmd)
Enter lein. If you haven't already, it should prompt you to run the install command. Do this if prompted, then enter lein again to make sure it worked (should output help menu)
Close out of Git bash if already open, then open again
Enter alias repl='winpty lein.bat repl'. You can choose what you want the alias to be, I used repl
Type repl (or whatever alias you added). Should take a second, then begin a REPL prompt
Using GitBash as your terminal, you can install the lein script rather than the lein.bat script.
The lein script will run correctly in GitBash (as it is effectively a Unix environment).
I recommend installing the lein script in a directory called bin in your user account directory, e.g.:
c:/Users/your-account/bin
Placing the lein script in bin will allow you to run the lein command anywhere on the GitBash command line.
A Note about Emacs, lein and windows
The lein script will also be called correctly from Emacs, assuming you run Emacs from the GitBash terminal, ie. runemacs. Add Emacs install directory to your user account PATH environment variable and GitBash will find it on the command line.
Emacs installed on Windows works better when run from the GitBash terminal, as you can then use ediff in Emacs, which requires the diff command that GitBash terminal provides.
My recommended Emacs installs for windows
zklhp emacs-w64 optomised
Chocolatey Emacs 64bit
My experience was that lein repl (and I do use the lein bash script) would start up ok, also printing the startup messages of the lein command to the shell, but would then stop to output anything (although the process might be running fine), part. not providing an interactive prompt (except for the first), not echoing user input (except for the first), nor printing evaluation results. When terminating the process with Ctrl-C all my inputs would be passed to the underlying shell (with funny results like $ (+ 3 4) bash: +: command not found).
My solution is to use Git CMD for interactive commands like lein repl, lein figwheel etc., which (unfortunately, as it might seem) works fine. Running a Git sh process inside a different terminal emulation (Cmder) also gives me a working interactive environment.
I am trying to get Leiningen and Cygwin working together.
One of the problems I think I have is that I have Java installed in "C:\Program Files\Java..." directory. The space appears to be causing issues.
When I try to run the lein script in Cygwin, I am getting the following error:
./lein: line 325: C:\Program Files\Java\jdk1.8.0_05\bin\java.exe : command not found
Then I thought the issue was the space. So I changed line 325 from:
"$LEIN_JAVA_CMD" \
to (for testing purposes):
"$'C:\\\Program Files\\\Java\\\jdk1.8.0_05\\\bin\\\java.exe'" \
But, I am still getting this error:
./lein: line 325: $'C:\\Program Files\\Java\\jdk1.8.0_05\\bin\\java.exe' : commande introuvable
However, this file clearly exists:
Owner#Owner-PC ~
$ ls -alh $'C:\\Program Files\\Java\\jdk1.8.0_05\\bin\\java.exe'
-rwxr-xr-x 1 Owner None 187K 8 mai 15:39 C:\Program Files\Java\jdk1.8.0_05\bin\java.exe
The lein script appears to be properly configuring Leiningen for Cygwin, however I can't get it to work.
Note that I previously installed Leiningen outside of Cygwin (I was running it in Windows' normal shell).
What could be wrong with my setup, any ideas?
I use Leiningen via Cygwin with no problems.
Start over
Start over with a fresh copy of the lein script. There should be no need to edit it.
Set your PATH to include java
The easiest solution is to set your path in ~/.profile to include the path to Java's bin directory. Lein will then find java on the path and you'll have access to java and its related tools in your shell.
export JAVA_HOME="/cygdrive/c/Program Files/Java/jdk1.8.0_05/"
export PATH="${JAVA_HOME}/bin/:${PATH}"
Restart your shell or source ~/.profile. Verify that which java finds java command. And run java to verify you get the help output.
And/or explicitly set the LEIN_JAVA_CMD and JAVA_CMD variables
Alternatively, set the LEIN_JAVA_CMD and JAVA_CMD variables used by lein in your ~/.profile
export JAVA_HOME="/cygdrive/c/Program Files/Java/jdk1.8.0_05/"
export LEIN_JAVA_CMD="${JAVA_HOME}/bin/java"
export JAVA_CMD=`cygpath -w "${LEIN_JAVA_CMD}"`
Restart your shell or source ~/.profile.
Note: You can also set a separate LEIN_JVM_OPTS and JVM_OPTS if desired, but this should not be necessary.
If you have lein previously installed on Windows and want to reach it from cygwin, then do:
on cmd:
cd C:/Users/%userprofile%/.lein/bin
mklink lein lein.bat
on cygwin:
export CYGWIN=winsymlinks:nativestrict
I feel your pain. I tried something like this myself several years ago.
You have at least two problems. One is getting lein to run as under unix as you noted. There are really two lein scripts - one for unix, the other a batch script for use under windows.
Your bigger problem is java.exe - getting the windows java executable to behave as a cygwin shell, and particular the unix lein script running in a cygwin shell, expects is messy and fragile undertaking.
I would strongly recommend either using a clojure ide that supports Windows (perhaps LightTable) or installing a full linux virtual machine with the unix java SDK and doing clojure development in that environment. Ubuntu running on virtualbox is freely available and an option I have used in the past for just this purpose.
You need to create a symbolic link to the "lein.bat" file.so you use it properly in Cygwin.
Open CMD and go to the ".lein" path (cd %userprofile%\.lein\bin) and run this: mklink lein lein.bat
#a-webb is almost right ,but there are still some steps to complete.First,you will find a folder called “.lein” where you run the lein script in cygwin,go in,copy the folder "self-installs" inside to C:\Users\yourUserName.lein
,then,add C:\Users\yourUserName.lein\bin to the environment variable $Path.
I've found the easiest way is to:
Install via the windows binaries and
Copy the lein bash script into .lein/bin
Then it should just work in cygwin.
I just started going through railstutorial.org and getting my development environment setup. When I got to the section 1.2.5 to run rails server for the fist_app, I type the command and the following printed out:
$ rails server
/Users/aaronpflower/.rvm/gems/ruby-2.0.0-p481#railstutorial_rails_4_0/gems/sqlite3- < 1.3.8/lib/sqlite3/sqlite3_native.bundle: [BUG] Segmentation fault ruby 2.0.0p481 (2014-05-08 revision 45883) [x86_64-darwin13.2.0]
Then followed by 500 lines of text
0 enumerator.so
1 /Users/aaronpflower/.rvm/rubies/ruby-2.0.0-p481/lib/ruby/2.0.0/x86_64-darwin13.2.0/enc/encdb.bundle
2 /Users/aaronpflower/.rvm/rubies/ruby-2.0.0-p481/lib/ruby/2.0.0/x86_64-darwin13.2.0/enc/trans/transdb.bundle
3 /Users/aaronpflower/.rvm/rubies/ruby-2.0.0-p481/lib/ruby/2.0.0/x86_64-darwin13.2.0/rbconfig.rb
4 /Users/aaronpflower/.rvm/rubies/ruby-2.0.0-p481/lib/ruby/site_ruby/2.0.0/rubygems/compatibility.rb
5 /Users/aaronpflower/.rvm/rubies/ruby-2.0.0-p481/lib/ruby/site_ruby/2.0.0/rubygems/defaults.rb
6 /Users/aaronpflower/.rvm/rubies/ruby-2.0.0-p481/lib/ruby/site_ruby/2.0.0/rubygems/deprecate.rb
7 /Users/aaronpflower/.rvm/rubies/ruby-2.0.0-p481/lib/ruby/site_ruby/2.0.0/rubygems/errors.rb
8 /Users/aaronpflower/.rvm/rubies/ruby-2.0.0-p481/lib/ruby/site_ruby/2.0.0/rubygems/version.rb
9 /Users/aaronpflower/.rvm/rubies/ruby-2.0.0-p481/lib/ruby/site_ruby/2.0.0/rubygems/requirement.rb
Which ended with:
[NOTE]
You may have encountered a bug in the Ruby interpreter or extension libraries.
Bug reports are welcome.
For details: http://www.ruby-lang.org/bugreport.html
Abort trap: 6
When this first happened double checked the steps leading up to this in the tutorial, since being a beginner that was a high possibility. I typed the follow commands and everything checkout. (I'm also using OS 10.9.3)
$ rails -v
Rails 4.0.5
$ ruby -v
2.0.0p481
$ rvm -v
1.25.27
$ brew doctor
system ready to brew
Through searching some posts have suggested to uninstall sqlite3 and then re-install but I still got the same seg fault message. Not sure of the next step.
Your Rails -v and Ruby -v are correct for this tutorial.
I can also see from the input that your gemfile has gem 'sqlite3', '1.3.8' in it.
1: Have you bundled?
When was the last time you ran bundle update or bundle install?
How did you go about uninstalling sqlite3? Did you use $ gem uninstall sqlite3?
Try uninstalling and then reinstalling the gem.
2: - What version manager?
Did you use rvm, rbenv or homebrew to install? Using different version managers for different pieces can create communication issues.
3: Did you install Xcode?
This is taken from http://www.railstutorial.org:
"As a prerequisite, OS X users may need to install the Xcode developer tools. To avoid the (huge) full installation, I recommend the much smaller Command Line Tools for Xcode.
To install Xcode (my recommendation), look it up in the AppStore.
To install Command Line Tools (MHartl's recommendation) - https://developer.apple.com/downloads/
4: Are you using `bundle exec`?
Try bundle exec rails c and bundle exec rails s
5: Try 'refreshing' your bundle directory
If bundle exec doesn't work
Remove the .bundle/ directory and re-bundle with
rm -rf .bundle/ && bundle
I experienced the same issue, I just switched to a different ruby version
e.g;
rvm use 1.9.3-p484
and then bundle again.
I am experiencing very annoying problems with the application apktool problem.
I do not understand what i am doing wrong, or what the problem is.
I tried this on debian , and on linux mint. I used different versions of apktool,
resulting in the same error:
I: Checking whether sources has changed...
I: Checking whether resources has changed...
I: Building resources...
Exception in thread "main" brut.androlib.AndrolibException: brut.common.BrutException: could not exec command: [aapt, p, -F, /tmp/APKTOOL3630495287059303807.tmp, -I, /home/awesomename/apktool/framework/1.apk, -S, /home/awesomename/out/./res, -M, /home/awesomename/out/./AndroidManifest.xml]
at brut.androlib.res.AndrolibResources.aaptPackage(Unknown Source)
at brut.androlib.Androlib.buildResourcesFull(Unknown Source)
at brut.androlib.Androlib.buildResources(Unknown Source)
at brut.androlib.Androlib.build(Unknown Source)
at brut.androlib.Androlib.build(Unknown Source)
at brut.apktool.Main.cmdBuild(Unknown Source)
at brut.apktool.Main.main(Unknown Source)
Caused by: brut.common.BrutException: could not exec command: [aapt, p, -F, /tmp/APKTOOL3630495287059303807.tmp, -I, /home/windows/apktool/framework/1.apk, -S, /home/windows/out/./res, -M, /home/windows/out/./AndroidManifest.xml]
at brut.util.OS.exec(Unknown Source)
... 7 more
Caused by: java.io.IOException: Cannot run program "aapt": error=2, No such file or directory
at java.lang.ProcessBuilder.start(ProcessBuilder.java:1041)
at java.lang.Runtime.exec(Runtime.java:617)
at java.lang.Runtime.exec(Runtime.java:485)
... 8 more
Caused by: java.io.IOException: error=2, No such file or directory
at java.lang.UNIXProcess.forkAndExec(Native Method)
at java.lang.UNIXProcess.<init>(UNIXProcess.java:135)
at java.lang.ProcessImpl.start(ProcessImpl.java:130)
at java.lang.ProcessBuilder.start(ProcessBuilder.java:1022)
... 10 more
It seems it can not use aapt , but i read about apktool.
And it seems that aapt is build inside apktool , why is it not working ?
It seems there's some problem in building the resources while recompiling the apk.
what you can do is, when you decompile your apk use this command
apktool d -f -r apkfilename.apk
here -f is to replace previous decompiled apk's code and -r is to ignore the decompiling of resources.
this would prevent the resources from being decompiled and will simply copy the same resources when you recompile the apk.
In case you've been using v1 and now upgraded to v2, try manually deleting the framework file.
On windows 8 it's normally at C:\Users\YourName\apktool\framework\1.apk.
The file should be regenerated once you try to build something.
My problem was solved by deleting the \framework\1.apk, making a backup on the files I modified, ereasing the dir and decompiling the *.apk again, etc... (on linux, the path is home/[user]/apktool/...). After the update, apktool always loaded the old resource table. N
For me, I solved this problem by first clearing apktool's framework directory by typing in the terminal.
$ apktool empty-framework-dir
Afterwards I uninstalled apktool and related files by typing
$ sudo apt purge apktool
Then i went to https://bitbucket.org/iBotPeaches/apktool/downloads/ to get the latest jar file for apktool(apktool_2.5.0.jar as at the time of writing this).
On first run
$ java -jar apktool_2.5.0.jar b <MyAPP.apk> #Without ><
it works.
since I work with apktool most of the times I needed a situation where I can run apktool from anywhere so I gave the jar file execute permissions by typing
$ sudo chmod +x apktool_2.5.0.jar
Afterwards I moved it /usr/bin/ by typing
$ sudo apktool_2.5.0.jar /usr/bin/
Definitely seems like the aapt PATH problem I had awhile back. Have you added aapt to PATH? If you still have problems, I have made a good apk kit in bash to avoid all these dependency problems. It supports apktool, signapk, zipalign,adb, fastboot, and heimdall. Check it out. All you need is a current java install.
http://forum.xda-developers.com/android/development/toolkit-apk-munky-rench-t3026757/post58747626#post58747626
There isn’t really enough information to give you a definite answer.
How ever you mentioned using different versions but the aapt issue was solved in version 2.4. Dependencies have been reduced to java version 1.8 or greater and the framework.
I use Debian and have the following:
Apktool 2.4
java version 11
Android framework
That’s all it took to get rid of the aapt path error.
The last error I came across was unrelated to aapt but was on the framework so I ran this command
apktool empty-framework-dir
And it solved it.
try to put the dir which include aapt file to your PATH. for example, export PATH=$PATH:./ ./apktool b
try to install ia32-libs and update latest version of apktool. (if possible restart)
apktool requires "ia32-libs" which is not available after Ubuntu 12.04. install ia32-libs
sudo apt-get install lib32z1 lib32ncurses5 lib32bz2-1.0 lib32stdc++6
Download latest version of apktools.jar - https://bitbucket.org/iBotPeaches/apktool/downloads
apktool complete installation guide - http://ibotpeaches.github.io/Apktool/install/
I just encounter same problem when run apktool d foo.apk(decompiled success) and then apktool b foo(recompile failed with similar error).
The apktool tool above was installed via sudo apt-get install apktool on Kali Linux.
So, the solution was visits apktool's official site, e.g. https://connortumbleson.com/2017/01/23/apktool-v2-2-2-released/ (it's latest version at this time of writing), download it, md5sum it, e.g. md5sum apktool_2.2.2.jar to verify, then rename that apktool_2.2.2.jar to apktool.jar.
Then do java -jar ./apktool.jar b foo to recompile, it success without error (the generated apk located at ./foo/dist/foo.apk).
The main issue is apktool version you need 2.4.0
You must manually install it from ibotpeaches git hub
here some good info
https://www.youtube.com/watch?v=kB6s10Uwpcs
and a automated script for kali
https://github.com/catenatedgoose?tab=repositories
In my mind the problem is how you install apktool...
I had the same problem and I did this and it worked very well:
For installation you first have to remove any installed apktool by the command:
sudo apt purge apktool
Then you'll have to install apktool but in a different way.
To continue save the link bellow as apktool in a directory.
[https://raw.githubusercontent.com/iBotPeaches/Apktool/master/scripts/linux/apktool]
Then open this link below and download the latest apktool.jar file: https://bitbucket.org/iBotPeaches/apktool/downloads/
Then rename the file as apktool.jar
After that give both files the permission by the command:
Sudo chmod -x apktool.jar
And for the saved script:
Sudo chmod -x apktool
At the end copy both files in the directory:
/usr/local/bin
By the command:
Sudo cp apktool.jar /usr/local/bin
And the script file:
Sudo cp apktool /usr/local/bin
After that try running apktoolin the terminal.
The solution is to include your apktool directory into your system PATH.
I have installed OSQA using the wiki script (webfaction). Now I want to compile a message file and I get the following error:
django msgfmt command not found
The command + output:
$ ls
apache2 bin lib osqa osqa.wsgi wfinstall.log
[rijkers#web303 hozburo]$ cd osqa
[rijkers#web303 osqa]$ ../bin/django-admin.py compilemessages
processing file django.po in /home/rijkers/webapps/hozburo/osqa/locale/bg/LC_MESSAGES sh: msgfmt: command not found
msgfmt is a program. You need to have it installed on your system for this compilemessages command to work (at least as far as I know it).
You are probably on some *nix system, so it shouldn't be very hard. Just use your package manager and install gettext package (or similar).