I'm trying to figure out why b->boo() actually calls a.far().
is the multiple inheritance from template class and general class forbidden? why does the inherit order matter?
The code is here:
#include <iostream>
template <int somecount>
class inner_parent_class
{
public:
int array[somecount];
virtual void far() = 0;
};
class any_class
{
public:
virtual void boo() = 0;
};
template <int somecount>
class child_class_bad : public inner_parent_class<somecount>, public any_class
{
public:
virtual void boo() override
{
std::cout << "call me" << std::endl;
}
virtual void far() override
{
std::cout << "do not call me" << std::endl;
}
};
template <int somecount>
class child_class_good : public any_class, public inner_parent_class<somecount>
{
public:
virtual void boo() override
{
std::cout << "call me" << std::endl;
}
virtual void far() override
{
std::cout << "do not call me" << std::endl;
}
};
int main()
{
{
child_class_good<32> a;
any_class* b;
auto c = dynamic_cast<void*>(&a);
b = reinterpret_cast<any_class*>(c);
b->boo();
}
{
child_class_bad<32> a;
any_class* b;
auto c = dynamic_cast<void*>(&a);
b = reinterpret_cast<any_class*>(c);
b->boo();
}
return 0;
}
# GCC 9.3.0
# VS 2019 16.5.3
I suppose that both child classes (child_class_good and child_class_bad) are different classes even though their class names are the same, because they are template classes and constructed separately at compiled time. Nevertheless, each class might have its own v-table, so I think calling boo() as their common parent class any_class should correctly work.
reinterpret_cast cannot be used to do what you're trying to do. A reinterpret_cast from a void* to a T* only produces a pointer to a valid T* if the void* pointer it was given was a pointer to an object of type T.
Doing a dynamic_cast<void*>(p) returns a void* which points to the most-derived object pointed to by p. Since your &a is in fact the most-derived object that it points to, it simply converts the pointer to a void*.
Then you perform reinterpret_cast<any_class*> on that void*. The void* points to an object of type child_class_good<32> or child_class_bad<32>. Your cast is saying that the pointer actually points to an any_class. This is incorrect (neither type is standard layout, so the layout of the base classes is not defined), and thus attempting to use the results will yield undefined behavior.
The case that you identify as good is just as invalid as bad; it merely happens to work.
It is not clear why you're trying to do whatever it is you're trying to do, but there's no valid way to take a void* pointing to the most-derived object of an unknown type and casting it to anything useful. In order to use a void*, you have to know the exact type that was used to produce that void*.
I'm using inheritance only for the sake of code reuse, I never cast class to its base class. It is performance heavy program so I would like to avoid the use of virtual functions but I do not know how. Consider following code
class A{
public:
void print(){
std::cout << "Result of f() is: " << f() << std::endl;
}
virtual std::string f(){
return "A";
}
};
class B : public A{
public:
virtual std::string f(){
return "B";
}
};
Would it be somehow possible to not use virtual function for function f() and not to reimplement function print() in the class B? I do not care that A is base class of B I just do not want to write down f() again. Probably inheritance is not the way to go, maybe templates can be used in smart way but I have no idea.
The CRTP pattern is typically used to avoid dynamic dispatch when it can be statically determined what implementation method to call for a particular method.
In your example, both A and B would inherit from a single base class, which provides the print() method. The base class, let's call it Print, is a template whose template argument is a class that provides f(). The twist that earned this pattern the "curious" moniker is that the subclasses must inherit the base class templatized over the subclass. This allows the subclasses to access the base class's print method, but obtaining a version of the base class - and by extension the version of print - that invokes their own f.
Here is an example of working code:
#include <iostream>
template<typename F>
class Print {
public:
void print() {
F& final = static_cast<F&>(*this);
std::cout << "Result of f() is: " << final.f() << std::endl;
}
};
class A: public Print<A> {
public:
std::string f(){
return "A";
}
};
class B: public Print<B> {
public:
std::string f(){
return "B";
}
};
int main() {
A a;
B b;
a.print();
b.print();
}
Although the print implementation is reused among A and B, there are no virtual methods here, nor is there virtual (run-time) dispatch or run-time checks. The one cast present is a static_cast<> whose safety is duly verified by the compiler.
This is possible because for every use of Print<F>, the compiler knows exactly what F is. Thus Print<A>::print is known to invoke A::f, while Print<B>::print invokes B::f, all known at compile time. This enables the compiler to inline and otherwise optimize such calls just like any other non-virtual method calls.
The downside is that there is no inheritance, either. Note that B is not derived from A - if it were, the pattern wouldn't work and both A::print and B::print would print A, since that's what Print<A> outputs. More fundamentally, you cannot pass B* where an A* is expected - that's undefined behavior. In fact, A and B don't share any common superclass, the Parent<A> and Parent<B> classes are completely separate. Loss of run-time dispatch, with both its drawbacks and benefits, and enabling static dispatch instead, is a fundamental tradeoff of static polymorphism.
If, for whatever reason, you do not want the "overhead" of dynamic binding, you can omit the virtual-keyword, which makes the compiler use static binding and disabling polymorphism. That is, the compiler will bind the implementation solely based on the type of the variable at compile time, not at run time.
To be honest, I never were in the situation where I defined a specific implementation for a method in a subclass without enabling polymorphism. Doing so usually indicates that there is no specific behaviour, i.e. the method should not be overridden in the subclass at all.
Further, already the code encapsulating a character constant into a string object costs far more performance then the dynamic binding / vtable-"overhead". Really, rethink it twice and then measure the performance increase before doing such "optimisations".
Anyway, see how your code behaves if you omit virtual. Note that ptr->f() in the code is bound to A::f, because the type of the variable is A*, though it points to an object of type B:
class A{
public:
void print(){
std::cout << "Result of f() is: " << f() << std::endl;
}
std::string f(){
return "A";
}
};
class B : public A{
public:
std::string f(){
return "B";
}
};
int main()
{
A a; cout << a.f(); // -> yields "A"
B b; cout << b.f(); // -> yields "B"
A* ptr = &b; cout << ptr->f(); // -> yields "A"; (virtual f, in contrast) would be "B"
return 0;
}
You could use templates to select dynamic or non-dynamic versions of A and B. A rather tricky/ugly option but worth considering.
#include <string>
template <bool Virt = false>
class A{
public:
std::string f(){
return "A";
}
};
template <>
class A<true> : A<false>{
public:
virtual std::string f(){
return A<false>::f();
}
};
template <bool Virt = false>
class B : public A<Virt>{
public:
std::string f(){
return "B";
}
};
std::string f1() { return B<>().f(); }
std::string f2(A<true> &a) { return a.f(); }
std::string f3() { B<true> b; return f2(b); }
#include <iostream>
int main(){
std::cout << f1() << '\n';
std::cout << f3() << '\n';
return(0);
}
An interesting point to note with this, it would not be possible except for the debatable decision made very early on in C++ (pre-templates) that the virtual keyword should be optional when overriding.
I have a bunch of classes which all inherit the same attributes from a common base class. The base class implements some virtual functions that work in general cases, whilst each subclass re-implements those virtual functions for a variety of special cases.
Here's the situation: I want the special-ness of these sub-classed objects to be expendable. Essentially, I would like to implement an expend() function which causes an object to lose its sub-class identity and revert to being a base-class instance with the general-case behaviours implemented in the base class.
I should note that the derived classes don't introduce any additional variables, so both the base and derived classes should be the same size in memory.
I'm open to destroying the old object and creating a new one, as long as I can create the new object at the same memory address, so existing pointers aren't broken.
The following attempt doesn't work, and produces some seemingly unexpected behaviour. What am I missing here?
#include <iostream>
class Base {
public:
virtual void whoami() {
std::cout << "I am Base\n";
}
};
class Derived : public Base {
public:
void whoami() {
std::cout << "I am Derived\n";
}
};
Base* object;
int main() {
object = new Derived; //assign a new Derived class instance
object->whoami(); //this prints "I am Derived"
Base baseObject;
*object = baseObject; //reassign existing object to a different type
object->whoami(); //but it *STILL* prints "I am Derived" (!)
return 0;
}
You can at the cost of breaking good practices and maintaining unsafe code. Other answers will provide you with nasty tricks to achieve this.
I dont like answers that just says "you should not do that", but I would like to suggest there probably is a better way to achieve the result you seek for.
The strategy pattern as suggested in a comment by #manni66 is a good one.
You should also think about data oriented design, since a class hierarchy does not look like a wise choice in your case.
Yes and no. A C++ class defines the type of a memory region that is an object. Once the memory region has been instantiated, its type is set. You can try to work around the type system sure, but the compiler won't let you get away with it. Sooner or later it will shoot you in the foot, because the compiler made an assumption about types that you violated, and there is no way to stop the compiler from making such assumption in a portable fashion.
However there is a design pattern for this: It's "State". You extract what changes into it's own class hierarchy, with its own base class, and you have your objects store a pointer to the abstract state base of this new hierarchy. You can then swap those to your hearts content.
No it's not possible to change the type of an object once instantiated.
*object = baseObject; doesn't change the type of object, it merely calls a compiler-generated assignment operator.
It would have been a different matter if you had written
object = new Base;
(remembering to call delete naturally; currently your code leaks an object).
C++11 onwards gives you the ability to move the resources from one object to another; see
http://en.cppreference.com/w/cpp/utility/move
I'm open to destroying the old object and creating a new one, as long as I can create the new object at the same memory address, so existing pointers aren't broken.
The C++ Standard explicitly addresses this idea in section 3.8 (Object Lifetime):
If, after the lifetime of an object has ended and before the storage which the object occupied is reused or released, a new object is created at the storage location which the original object occupied, a pointer that pointed to the original object, a reference that referred to the original object, or the name of the original object will automatically refer to the new object and, once the lifetime of the new object has started, can be used to manipulate the new object <snip>
Oh wow, this is exactly what you wanted. But I didn't show the whole rule. Here's the rest:
if:
the storage for the new object exactly overlays the storage location which the original object occupied, and
the new object is of the same type as the original object (ignoring the top-level cv-qualifiers), and
the type of the original object is not const-qualified, and, if a class type, does not contain any non-static data member whose type is const-qualified or a reference type, and
the original object was a most derived object (1.8) of type T and the new object is a most derived object of type T (that is, they are not base class subobjects).
So your idea has been thought of by the language committee and specifically made illegal, including the sneaky workaround that "I have a base class subobject of the right type, I'll just make a new object in its place" which the last bullet point stops in its tracks.
You can replace an object with an object of a different type as #RossRidge's answer shows. Or you can replace an object and keep using pointers that existed before the replacement. But you cannot do both together.
However, like the famous quote: "Any problem in computer science can be solved by adding a layer of indirection" and that is true here too.
Instead of your suggested method
Derived d;
Base* p = &d;
new (p) Base(); // makes p invalid! Plus problems when d's destructor is automatically called
You can do:
unique_ptr<Base> p = make_unique<Derived>();
p.reset(make_unique<Base>());
If you hide this pointer and slight-of-hand inside another class, you'll have the "design pattern" such as State or Strategy mentioned in other answers. But they all rely on one extra level of indirection.
I suggest you use the Strategy Pattern, e.g.
#include <iostream>
class IAnnouncer {
public:
virtual ~IAnnouncer() { }
virtual void whoami() = 0;
};
class AnnouncerA : public IAnnouncer {
public:
void whoami() override {
std::cout << "I am A\n";
}
};
class AnnouncerB : public IAnnouncer {
public:
void whoami() override {
std::cout << "I am B\n";
}
};
class Foo
{
public:
Foo(IAnnouncer *announcer) : announcer(announcer)
{
}
void run()
{
// Do stuff
if(nullptr != announcer)
{
announcer->whoami();
}
// Do other stuff
}
void expend(IAnnouncer* announcer)
{
this->announcer = announcer;
}
private:
IAnnouncer *announcer;
};
int main() {
AnnouncerA a;
Foo foo(&a);
foo.run();
// Ready to "expend"
AnnouncerB b;
foo.expend(&b);
foo.run();
return 0;
}
This is a very flexible pattern that has at least a few benefits over trying to deal with the issue through inheritance:
You can easily change the behavior of Foo later on by implementing a new Announcer
Your Announcers (and your Foos) are easily unit tested
You can reuse your Announcers elsewhere int he code
I suggest you have a look at the age-old "Composition vs. Inheritance" debate (cf. https://www.thoughtworks.com/insights/blog/composition-vs-inheritance-how-choose)
ps. You've leaked a Derived in your original post! Have a look at std::unique_ptr if it is available.
You can do what you're literally asking for with placement new and an explicit destructor call. Something like this:
#include <iostream>
#include <stdlib.h>
class Base {
public:
virtual void whoami() {
std::cout << "I am Base\n";
}
};
class Derived : public Base {
public:
void whoami() {
std::cout << "I am Derived\n";
}
};
union Both {
Base base;
Derived derived;
};
Base *object;
int
main() {
Both *tmp = (Both *) malloc(sizeof(Both));
object = new(&tmp->base) Base;
object->whoami();
Base baseObject;
tmp = (Both *) object;
tmp->base.Base::~Base();
new(&tmp->derived) Derived;
object->whoami();
return 0;
}
However as matb said, this really isn't a good design. I would recommend reconsidering what you're trying to do. Some of other answers here might also solve your problem, but I think anything along the idea of what you're asking for is going to be kludge. You should seriously consider designing your application so you can change the pointer when the type of the object changes.
You can by introducing a variable to the base class, so the memory footprint stays the same. By setting the flag you force calling the derived or the base class implementation.
#include <iostream>
class Base {
public:
Base() : m_useDerived(true)
{
}
void setUseDerived(bool value)
{
m_useDerived = value;
}
void whoami() {
m_useDerived ? whoamiImpl() : Base::whoamiImpl();
}
protected:
virtual void whoamiImpl() { std::cout << "I am Base\n"; }
private:
bool m_useDerived;
};
class Derived : public Base {
protected:
void whoamiImpl() {
std::cout << "I am Derived\n";
}
};
Base* object;
int main() {
object = new Derived; //assign a new Derived class instance
object->whoami(); //this prints "I am Derived"
object->setUseDerived(false);
object->whoami(); //should print "I am Base"
return 0;
}
In addition to other answers, you could use function pointers (or any wrapper on them, like std::function) to achieve the necessary bevahior:
void print_base(void) {
cout << "This is base" << endl;
}
void print_derived(void) {
cout << "This is derived" << endl;
}
class Base {
public:
void (*print)(void);
Base() {
print = print_base;
}
};
class Derived : public Base {
public:
Derived() {
print = print_derived;
}
};
int main() {
Base* b = new Derived();
b->print(); // prints "This is derived"
*b = Base();
b->print(); // prints "This is base"
return 0;
}
Also, such function pointers approach would allow you to change any of the functions of the objects in run-time, not limiting you to some already defined sets of members implemented in derived classes.
There is a simple error in your program. You assign the objects, but not the pointers:
int main() {
Base* object = new Derived; //assign a new Derived class instance
object->whoami(); //this prints "I am Derived"
Base baseObject;
Now you assign baseObject to *object which overwrites the Derived object with a Base object. However, this does work well because you are overwriting an object of type Derived with an object of type Base. The default assignment operator just assigns all members, which in this case does nothing. The object cannot change its type and still is a Derived objects afterwards. In general, this can leads to serious problems e.g. object slicing.
*object = baseObject; //reassign existing object to a different type
object->whoami(); //but it *STILL* prints "I am Derived" (!)
return 0;
}
If you instead just assign the pointer it will work as expected, but you just have two objects, one of type Derived and one Base, but I think you want some more dynamic behavior. It sounds like you could implement the specialness as a Decorator.
You have a base-class with some operation, and several derived classes that change/modify/extend the base-class behavior of that operation. Since it is based on composition it can be changed dynamically. The trick is to store a base-class reference in the Decorator instances and use that for all other functionality.
class Base {
public:
virtual void whoami() {
std::cout << "I am Base\n";
}
virtual void otherFunctionality() {}
};
class Derived1 : public Base {
public:
Derived1(Base* base): m_base(base) {}
virtual void whoami() override {
std::cout << "I am Derived\n";
// maybe even call the base-class implementation
// if you just want to add something
}
virtual void otherFunctionality() {
base->otherFunctionality();
}
private:
Base* m_base;
};
Base* object;
int main() {
Base baseObject;
object = new Derived(&baseObject); //assign a new Derived class instance
object->whoami(); //this prints "I am Derived"
// undecorate
delete object;
object = &baseObject;
object->whoami();
return 0;
}
There are alternative patterns like Strategy which implement different use cases resp. solve different problems. It would probably good to read the pattern documentation with special focus to the Intent and Motivation sections.
I would consider regularizing your type.
class Base {
public:
virtual void whoami() { std::cout << "Base\n"; }
std::unique_ptr<Base> clone() const {
return std::make_unique<Base>(*this);
}
virtual ~Base() {}
};
class Derived: public Base {
virtual void whoami() overload {
std::cout << "Derived\n";
};
std::unique_ptr<Base> clone() const override {
return std::make_unique<Derived>(*this);
}
public:
~Derived() {}
};
struct Base_Value {
private:
std::unique_ptr<Base> pImpl;
public:
void whoami () {
pImpl->whoami();
}
template<class T, class...Args>
void emplace( Args&&...args ) {
pImpl = std::make_unique<T>(std::forward<Args>(args)...);
}
Base_Value()=default;
Base_Value(Base_Value&&)=default;
Base_Value& operator=(Base_Value&&)=default;
Base_Value(Base_Value const&o) {
if (o.pImpl) pImpl = o.pImpl->clone();
}
Base_Value& operator=(Base_Value&& o) {
auto tmp = std::move(o);
swap( pImpl, tmp.pImpl );
return *this;
}
};
Now a Base_Value is semantically a value-type that behaves polymorphically.
Base_Value object;
object.emplace<Derived>();
object.whoami();
object.emplace<Base>();
object.whoami();
You could wrap a Base_Value instance in a smart pointer, but I wouldn't bother.
I don’t disagree with the advice that this isn’t a great design, but another safe way to do it is with a union that can hold any of the classes you want to switch between, since the standard guarantees it can safely hold any of them. Here’s a version that encapsulates all the details inside the union itself:
#include <cassert>
#include <cstdlib>
#include <iostream>
#include <new>
#include <typeinfo>
class Base {
public:
virtual void whoami() {
std::cout << "I am Base\n";
}
virtual ~Base() {} // Every base class with child classes that might be deleted through a pointer to the
// base must have a virtual destructor!
};
class Derived : public Base {
public:
void whoami() {
std::cout << "I am Derived\n";
}
// At most one member of any union may have a default member initializer in C++11, so:
Derived(bool) : Base() {}
};
union BorD {
Base b;
Derived d; // Initialize one member.
BorD(void) : b() {} // These defaults are not used here.
BorD( const BorD& ) : b() {} // No per-instance data to worry about!
// Otherwise, this could get complicated.
BorD& operator= (const BorD& x) // Boilerplate:
{
if ( this != &x ) {
this->~BorD();
new(this) BorD(x);
}
return *this;
}
BorD( const Derived& x ) : d(x) {} // The constructor we use.
// To destroy, be sure to call the base class’ virtual destructor,
// which works so long as every member derives from Base.
~BorD(void) { dynamic_cast<Base*>(&this->b)->~Base(); }
Base& toBase(void)
{ // Sets the active member to b.
Base* const p = dynamic_cast<Base*>(&b);
assert(p); // The dynamic_cast cannot currently fail, but check anyway.
if ( typeid(*p) != typeid(Base) ) {
p->~Base(); // Call the virtual destructor.
new(&b) Base; // Call the constructor.
}
return b;
}
};
int main(void)
{
BorD u(Derived{false});
Base& reference = u.d; // By the standard, u, u.b and u.d have the same address.
reference.whoami(); // Should say derived.
u.toBase();
reference.whoami(); // Should say base.
return EXIT_SUCCESS;
}
A simpler way to get what you want is probably to keep a container of Base * and replace the items individually as needed with new and delete. (Still remember to declare your destructor virtual! That’s important with polymorphic classes, so you call the right destructor for that instance, not the base class’ destructor.) This might save you some extra bytes on instances of the smaller classes. You would need to play around with smart pointers to get safe automatic deletion, though. One advantage of unions over smart pointers to dynamic memory is that you don’t have to allocate or free any more objects on the heap, but can just re-use the memory you have.
DISCLAIMER: The code here is provided as means to understand an idea, not to be implemented in production.
You're using inheritance. It can achieve 3 things:
Add fields
Add methods
replace virtual methods
Out of all those features, you're using only the last one. This means that you're not actually forced to rely on inheritance. You can get the same results by many other means. The simplest is to keep tabs on the "type" by yourself - this will allow you to change it on the fly:
#include <stdexcept>
enum MyType { BASE, DERIVED };
class Any {
private:
enum MyType type;
public:
void whoami() {
switch(type){
case BASE:
std::cout << "I am Base\n";
return;
case DERIVED:
std::cout << "I am Derived\n";
return;
}
throw std::runtime_error( "undefined type" );
}
void changeType(MyType newType){
//insert some checks if that kind of transition is legal
type = newType;
}
Any(MyType initialType){
type = initialType;
}
};
Without inheritance the "type" is yours to do whatever you want. You can changeType at any time it suits you. With that power also comes responsibility: the compiler will no longer make sure the type is correct or even set at all. You have to ensure it or you'll get hard to debug runtime errors.
You may wrap it in inheritance just as well, eg. to get a drop-in replacement for existing code:
class Base : Any {
public:
Base() : Any(BASE) {}
};
class Derived : public Any {
public:
Derived() : Any(DERIVED) {}
};
OR (slightly uglier):
class Derived : public Base {
public:
Derived : Base() {
changeType(DERIVED)
}
};
This solution is easy to implement and easy to understand. But with more options in the switch and more code in each path it gets very messy. So the very first step is to refactor the actual code out of the switch and into self-contained functions. Where better to keep than other than Derivied class?
class Base {
public:
static whoami(Any* This){
std::cout << "I am Base\n";
}
};
class Derived {
public:
static whoami(Any* This){
std::cout << "I am Derived\n";
}
};
/*you know where it goes*/
switch(type){
case BASE:
Base:whoami(this);
return;
case DERIVED:
Derived:whoami(this);
return;
}
Then you can replace the switch with an external class that implements it via virtual inheritance and TADA! We've reinvented the Strategy Pattern, as others have said in the first place : )
The bottom line is: whatever you do, you're not inheriting the main class.
you cannot change to the type of an object after instantiation, as you can see in your example you have a pointer to a Base class (of type base class) so this type is stuck to it until the end.
the base pointer can point to upper or down object doesn't mean changed its type:
Base* ptrBase; // pointer to base class (type)
ptrBase = new Derived; // pointer of type base class `points to an object of derived class`
Base theBase;
ptrBase = &theBase; // not *ptrBase = theDerived: Base of type Base class points to base Object.
pointers are much strong, flexible, powerful as much dangerous so you should handle them cautiously.
in your example I can write:
Base* object; // pointer to base class just declared to point to garbage
Base bObject; // object of class Base
*object = bObject; // as you did in your code
above it's a disaster assigning value to un-allocated pointer. the program will crash.
in your example you escaped the crash through the memory which was allocated at first:
object = new Derived;
it's never good idea to assign a value and not address of a subclass object to base class. however in built-in you can but consider this example:
int* pInt = NULL;
int* ptrC = new int[1];
ptrC[0] = 1;
pInt = ptrC;
for(int i = 0; i < 1; i++)
cout << pInt[i] << ", ";
cout << endl;
int* ptrD = new int[3];
ptrD[0] = 5;
ptrD[1] = 7;
ptrD[2] = 77;
*pInt = *ptrD; // copying values of ptrD to a pointer which point to an array of only one element!
// the correct way:
// pInt = ptrD;
for(int i = 0; i < 3; i++)
cout << pInt[i] << ", ";
cout << endl;
so the result as not as you guess.
I have 2 solutions. A simpler one that doesn't preserve the memory address, and one that does preserve the memory address.
Both require that you provide provide downcasts from Base to Derived which isn't a problem in your case.
struct Base {
int a;
Base(int a) : a{a} {};
virtual ~Base() = default;
virtual auto foo() -> void { cout << "Base " << a << endl; }
};
struct D1 : Base {
using Base::Base;
D1(Base b) : Base{b.a} {};
auto foo() -> void override { cout << "D1 " << a << endl; }
};
struct D2 : Base {
using Base::Base;
D2(Base b) : Base{b.a} {};
auto foo() -> void override { cout << "D2 " << a << endl; }
};
For the former one you can create a smart pointer that can seemingly change the held data between Derived (and base) classes:
template <class B> struct Morpher {
std::unique_ptr<B> obj;
template <class D> auto morph() {
obj = std::make_unique<D>(*obj);
}
auto operator->() -> B* { return obj.get(); }
};
int main() {
Morpher<Base> m{std::make_unique<D1>(24)};
m->foo(); // D1 24
m.morph<D2>();
m->foo(); // D2 24
}
The magic is in
m.morph<D2>();
which changes the held object preserving the data members (actually uses the cast ctor).
If you need to preserve the memory location, you can adapt the above to use a buffer and placement new instead of unique_ptr. It is a little more work a whole lot more attention to pay to, but it gives you exactly what you need:
template <class B> struct Morpher {
std::aligned_storage_t<sizeof(B)> buffer_;
B *obj_;
template <class D>
Morpher(const D &new_obj)
: obj_{new (&buffer_) D{new_obj}} {
static_assert(std::is_base_of<B, D>::value && sizeof(D) == sizeof(B) &&
alignof(D) == alignof(B));
}
Morpher(const Morpher &) = delete;
auto operator=(const Morpher &) = delete;
~Morpher() { obj_->~B(); }
template <class D> auto morph() {
static_assert(std::is_base_of<B, D>::value && sizeof(D) == sizeof(B) &&
alignof(D) == alignof(B));
obj_->~B();
obj_ = new (&buffer_) D{*obj_};
}
auto operator-> () -> B * { return obj_; }
};
int main() {
Morpher<Base> m{D1{24}};
m->foo(); // D1 24
m.morph<D2>();
m->foo(); // D2 24
m.morph<Base>();
m->foo(); // Base 24
}
This is of course the absolute bare bone. You can add move ctor, dereference operator etc.
#include <iostream>
class Base {
public:
virtual void whoami() {
std::cout << "I am Base\n";
}
};
class Derived : public Base {
public:
void whoami() {
std::cout << "I am Derived\n";
}
};
Base* object;
int main() {
object = new Derived;
object->whoami();
Base baseObject;
object = &baseObject;// this is how you change.
object->whoami();
return 0;
}
output:
I am Derived
I am Base
Your assignment only assigns member variables, not the pointer used for virtual member function calls. You can easily replace that with full memory copy:
//*object = baseObject; //this assignment was wrong
memcpy(object, &baseObject, sizeof(baseObject));
Note that much like your attempted assignment, this would replace member variables in *object with those of the newly constructed baseObject - probably not what you actually want, so you'll have to copy the original member variables to the new baseObject first, using either assignment operator or copy constructor before the memcpy, i.e.
Base baseObject = *object;
It is possible to copy just the virtual functions table pointer but that would rely on internal knowledge about how the compiler stores it so is not recommended.
If keeping the object at the same memory address is not crucial, a simpler and so better approach would be the opposite - construct a new base object and copy the original object's member variables over - i.e. use a copy constructor.
object = new Base(*object);
But you'll also have to delete the original object, so the above one-liner won't be enough - you need to remember the original pointer in another variable in order to delete it, etc. If you have multiple references to that original object you'll need to update them all, and sometimes this can be quite complicated. Then the memcpy way is better.
If some of the member variables themselves are pointers to objects that are created/deleted in the main object's constructor/destructor, or if they have a more specialized assignment operator or other custom logic, you'll have some more work on your hands, but for trivial member variables this should be good enough.
I was recently asked this question in an interview:
#include <iostream>
class Base
{
public:
void foo() { std::cout << "foo" << std::endl; }
};
class Derived : public Base
{
public:
void bar() { std::cout << "bar" << std::endl; }
};
int main(int argc, const char *argv[])
{
Base *p = new Derived;
// additional code here
return 0;
}
The conditions on the question were that the Base and Derived classes cannot be changed (for example changing the name of the methods, adding additional methods, or changing a method to virtual.
A further restriction was that no type of cast could be used.
The pointer p had to be used.
Other than that, you could write any additional code, including as many classes as necessary to insure that the "bar()" method was called using the object pointed to by p.
Given that no casts were allowed, the only aswer I could come up with was an old-school one:
Derived *d;
memcpy(&d, &p, sizeof p);
d->bar();
Which is even worse than a cast.
The interviewer berated me and told me I didn't have even the most basic knowledge of object hierarchy since I could not see the very obvious, trivial solution to the question.
I apologize if this question is a duplicate; I've seen other questions about accessing a method in a derived class from a base class, but in all cases I saw, the answer involved either a cast or modification to either of the classes.
He may be correct; I've been programming in C++ for over 15 years and I cannot see the solution. It could be I've never encountered it since I would use a cast in this situation: in this case, it would have to be a static_cast since there are no virtual methods (not even the destructor) which would allow the dynamic_vast to compile (it fails with a message: "'Base' is not a polymorphic type"
Simple and easy dumb:
#define Base Derived
just before main. (you can then call bar on it)
I maybe would come up with something like:
void foobar(Base* b){
Derived d;
d.bar();
}
int main(int argc, const char *argv[]){
Base *p = new Derived;
foobar(p);
return 0;
}
And if the interviewer complains that this is too foobar, I would ask him to please ask less foobar questions :P
No, really, I do consider this as a valid answer to a quite academic question. I am using the object pointed by p (to call a foobar function) and I made sure that 'bar()' is called. I dont think such an exercise deserves a more sophisticated solution. Logically, my solution cannot be distinguished from whatever solution the interviewer had in mind.
The pointer p had to be used. Other than that, you could write any additional code, including as many classes as necessary to insure that the "bar()" method was called using the object pointed to by p.
As many classes as necessary, you say?
#include <iostream>
class Base
{
public:
void foo() { std::cout << "foo" << std::endl; }
};
class Derived : public Base
{
public:
void bar() { std::cout << "bar" << std::endl; }
};
int main()
{
class Base
{
public:
void bar() { std::cout << "bar" << std::endl; }
};
class Derived : public Base
{
};
Base *p = new Derived;
p->bar();
}
You could use a union for type-punning:
union {
Base* bp;
Derived* dp;
} my_union = {p};
my_union.dp->bar();
Answer could be: This will not compile.
Lets say we have the following two class definitions.
#include <iostream>
#include <array>
class A
{
public:
virtual void f() = 0;
};
class B : public A
{
public:
virtual void f() { std::cout << i << std::endl; }
int i;
};
Here sizeof(B) == 8, presumably 4 the virtual pointer and 4 for the int.
Now lets say we make an array of B, like so:
std::array<B, 10> x;
Now we get sizeof(x) == 80.
If my understanding is correct, all method calls on elements of x are resolved statically, as we know the type at compile time. Unless we do something like A* p = &x[i] I don't see a need to even store the virtual pointer.
Is there a way to create an object of type B without a virtual pointer if you know it is not going to be used?
i.e. a template type nonvirtual<T> which does not contain a virtual pointer, and cannot be pointed to by a subtype of T?
Is there a way to create an object of type B without a virtual pointer if you know it is not going to be used?
No. Objects are what they are. A virtual object is virtual, always.
After all, you could do this:
A *a = &x[2];
a->f();
That is perfectly legitimate and legal code. And C++ has to allow it. The type B is virtual, and it has a certain size. You can't make a type be a different type based on where it is used.
Answering my own question here, but I've found that the following does the job, by splitting A into it's virtual and non-virtual components:
enum is_virtual
{
VIRTUAL,
STATIC
};
template <is_virtual X>
class A;
template<>
class A<STATIC>
{
};
template<>
class A<VIRTUAL> : public A<STATIC>
{
public:
virtual void f() = 0;
virtual ~A() {}
};
template <is_virtual X>
class B : public A<X>
{
public:
void f() { std::cout << i << std::endl; }
int i;
};
The important thing here is that in B<> don't specify f() as virtual. That way it will be virtual if the class inherits A<VIRTUAL>, but not virtual if it inherits A<STATIC>. Then we can do the following:
int main()
{
std::cout << sizeof(B<STATIC>) << std::endl; // 4
std::cout << sizeof(B<VIRTUAL>) << std::endl; // 8
std::array<B<STATIC>, 10> x1;
std::array<B<VIRTUAL>, 10> x2;
std::cout << sizeof(x1) << std::endl; // 40
std::cout << sizeof(x2) << std::endl; // 80
}
That would be a nice one to have, but I can't think of any way to revoke virtual members or avoid storing the virtual pointer.
You could probably do some nasty hacks by keeping a buffer that's the size of B without the virtual pointer, and play with casts and such. But is all undefined behavior, and platform dependant.
Unfortunately it won't work in any normal sense as the code inside the method calls expects the virtual pointer to be in the class definition.
I suppose you could copy/paste all of A and B's code into a new class but that gets to be a maintenance headache fast.