I found this pydub example here on github :
from pydub import AudioSegment
from pydub.silence import split_on_silence
sound_file = AudioSegment.from_wav("testsample.wav")
audio_chunks = split_on_silence(sound_file,
# must be silent for at least half a second
min_silence_len=500,
# consider it silent if quieter than -16 dBFS
silence_thresh=-16
)
for i, chunk in enumerate(audio_chunks):
out_file = ".//splitAudio//chunk{0}.wav".format(i)
print "exporting", out_file
chunk.export(out_file, format="wav")
It should do exactly what I want, split an audio file on silent parts.
However I can't seem to actually get it to export.
While debugging i found that it doesn't seem to get into the for loop. When I put the for loop in a try except and print the exception, i get an expection saying "start".
Could someone point me in the right direction?
Thanks a lot!
Related
When using the python logger, my program starts fine with logging but at some point the log output starts outputting lines twice, looking like this:
DEBUG:pluginbrowser:Scanning plugs
DEBUG:pluginbrowser:Doing good stuff
....
INFO:pluginbrowser:=== doing something ===
=== doing something ===
Currently all my python files contain the line
LOGGER = logging.getLogger(__name__)
LOGGER.setLevel(logging.DEBUG)
Thus, the doubled message comes from the pluginbrowser.py file. Examining this, I found out that at the beginning of my program, the same files output some log without double-ing the lines. I tried to find out at which point exactly it happens but I am somehow stuck here.
I also read log messages appearing twice with Python Logging but I am not using configure_logging at all.
Looks like you add an additional handler somewhere along the way.
I would search for addHandler in the code. You could also debug and watch logger.root.handlers
This is how I could reproduce your effects:
In [1]: import logging
In [2]: logging.basicConfig(level=logging.DEBUG)
In [3]: logger = logging.getLogger('pluginbrowser')
In [4]: logger.info('=== doing something ===')
INFO:pluginbrowser:=== doing something ===
In [5]: logging.root.addHandler(logging.StreamHandler())
In [6]: logger.info('=== doing something ===')
INFO:pluginbrowser:=== doing something ===
=== doing something ===
import sys, hashlib
import os
inputFile = 'C:\Users\User\Desktop\hashes.txt'
sourceDir = 'C:\Users\User\Desktop\Test Directory'
hashMatch = False
for root, dirs, files in os.walk(sourceDir):
for filename in files:
sourceDirHashes = hashlib.md5(filename)
for digest in inputFile:
if sourceDirHashes.hexdigest() == digest:
hashMatch = True
break
if hashMatch:
print str(filename)
else:
print 'hash not found'
Contents of inputFile =
2899ebdb5f7a90a216e97b3187851fc1
54c177418615a90a6424cb945f7a6aec
dd18bf3a8e0a2a3e53e2661c7fb53534
Contents of sourceDir files =
test
test 1
test 2
I almost have the code working, I'm just tripping up somewhere. My current code that I have posted always returns the else statement, that the hash hasn't been found, even although they do as I have verified this. I have provided the content of my sourceDir so that someone case try this, the file names are test, test 1 and test 2, the same content is in the files.
I must add however, I am not looking for the script to print the actual file content, but rather the name of the file.
Could anyone suggest to where I am going wrong and why it is saying the condition is false?
You need to open the inputFile using open(inputFile, 'rt') then you can read the hashes. Also when you do read the hashes make sure you strip them first to get rid of new line characters \n at the end of the lines
I just wrote a simple webscraping script to give me all the episode links on a particular site's page. The script was working fine, but, now it's broke. I didn't change anything.
Try this URL (For scraping ) :- http://www.crunchyroll.com/tabi-machi-late-show
Now, the script works mid-way and gives me an error stating, ' Element not found in the cache - perhaps the page has changed since it was looked up'
I looked it up on internet and people said about using the 'implicit wait' command at certain places. I did that, still no luck.
UPDATE : I tried this script in a demote desktop and it's working there without any problems.
Here's my script :-
from selenium import webdriver
from selenium.webdriver.common.keys import Keys
import os
import time
from subprocess import Popen
#------------------------------------------------
try:
Link = raw_input("Please enter your Link : ")
if not Link:
raise ValueError('Please Enter A Link To The Anime Page. This Application Will now Exit in 5 Seconds.')
except ValueError as e:
print(e)
time.sleep(5)
exit()
print 'Analyzing the Page. Hold on a minute.'
driver = webdriver.Firefox()
driver.get(Link)
assert "Crunchyroll" in driver.title
driver.implicitly_wait(5) # <-- I tried removing this lines as well. No luck.
elem = driver.find_elements_by_xpath("//*[#href]")
driver.implicitly_wait(10) # <-- I tried removing this lines as well. No luck.
text_file = open("BatchLink.txt", "w")
print 'Fetching The Links, please wait.'
for elem in elem:
x = elem.get_attribute("href")
#print x
text_file.write(x+'\n')
print 'Links have been fetched. Just doing the final cleaning now.'
text_file.close()
CleanFile = open("queue.txt", "w")
with open('BatchLink.txt') as f:
mylist = f.read().splitlines()
#print mylist
with open('BatchLink.txt', 'r') as inF:
for line in inF:
if 'episode' in line:
CleanFile.write(line)
print 'Please Check the file named queue.txt'
CleanFile.close()
os.remove('BatchLink.txt')
driver.close()
Here's a screenshot of the error (might be of some help) :
http://i.imgur.com/SaANlsg.png
Ok i didn't work with python but know the problem
you have variable that you init -> elem = driver.find_elements_by_xpath("//*[#href]")
after that you doing some things with it in loop
before you finishing the loop try to init this variable again
elem = driver.find_elements_by_xpath("//*[#href]")
The thing is that the DOM is changes and you loosing the element collection.
I have written following code I am able to print out the parsed values of Lat and lon but i am unable to write them to a file. I tried flush and also i tried closing the file but of no use. Can somebody point out whats wrong here.
import os
import serial
def get_present_gps():
ser=serial.Serial('/dev/ttyUSB0',4800)
ser.open()
# open a file to write gps data
f = open('/home/iiith/Desktop/gps1.txt', 'w')
data=ser.read(1024) # read 1024 bytes
f.write(data) #write data into file
f = open('/home/iiith/Desktop/gps1.txt', 'r')# fetch the required file
f1 = open('/home/iiith/Desktop/gps2.txt', 'a+')
for line in f.read().split('\n'):
if line.startswith('$GPGGA'):
try:
lat, _, lon= line.split(',')[2:5]
lat=float(lat)
lon=float(lon)
print lat/100
print lon/100
a=[lat,lon]
f1.write(lat+",")
f1.flush()
f1.write(lon+"\n")
f1.flush()
f1.close()
except:
pass
while True:
get_present_gps()
You're covering the error up by using the except: pass. Don't do that... ever. At least log the exception.
One error which it definitely covers is lat+",", which is going to fail because it's float+str and it's not implemented. But there may be more.
I m trying to read two files and replace content of one file with content of other file in files present in folder which also has sub directories.
But its tell sub process not defined.
i'm new to python and shell script can anybody help me with this please?
import os
import sys
import os.path
f = open ( "file1.txt",'r')
g = open ( "file2.txt",'r')
text1=f.readlines()
text2=g.readlines()
i = 0;
for line in text1:
l = line.replace("\r\n", "")
t = text2[i].replace("\r\n", "")
args = "find . -name *.tml"
Path = subprocess.Popen( args , shell=True )
os.system(" sed -r -i 's/" + l + "/" + t + "/g' " + Path)
i = i + 1;
To specifically address your actual error, you need to import the subprocess module as you are making use of it (oddly) in your code:
import subprocess
After that, you will find more problems. I will try and keep it as simple as possible with my suggestions. Code first, then I will break it down. Keep in mind, there are more robust ways to accomplish this task. But I am doing my best to keep in mind your experience level and making it make your current approach as closely as possible.
import subprocess
import sys
# 1
results = subprocess.Popen("find . -name '*.tml'",
shell=True, stdout=subprocess.PIPE)
if results.wait() != 0:
print "error trying to find tml files"
sys.exit(1)
# 2
tml_files = []
for tml in results.stdout:
tml_files.append(tml.strip())
if not tml_files:
print "no tml files found"
sys.exit(0)
tml_string = " ".join(tml_files)
# 3
with open ("file1.txt") as f, open("file2.txt") as g:
while True:
# 4
f_line = f.readline()
if not f_line:
break
g_line = g.readline()
if not g_line:
break
f_line = f_line.strip()
g_line = g_line.strip()
if not f_line or not g_line:
continue
# 5
cmd = "sed -i -e 's/%s/%s/g' %s" % \
(f_line.strip(), g_line.strip(), tml_string)
ret = subprocess.Popen(cmd, shell=True).wait()
if ret != 0:
print "error doing string replacement"
sys.exit(1)
You do not need to read in your entire files at once. If they are large this could be a lot of memory. You can consume a line at a time, and you can also make use of what is called "context managers" when you open the files. This will ensure they close properly no matter what happens:
We start with a subprocess command that is run only once to find all your .tml files. Your version had the same command being run multiple times. If the search path is the same, then we only need it once. This checks the exit code of the command and quits if it failed.
We loop over stdout on the subprocess command, and add the stripped lines to a list. This is a more robust way of your replace("\r\n"). It removes whitespace. A "list comprehension" would be better suited here (down the line). If we didn't find any tml files, then we have no work to do, so we exit. Otherwise, we join them together in a space-separated string to be suitable for our command later.
This is called "context managers". You can open the file in a way that no matter what they will be closed properly. The file is open for the length of the context within that code block. We are going to loop forever, and break when appropriate.
We pull a line, one at a time, from each file. If either line is blank, we reached the end of the file and cannot do any more work, so we break out. We then strip the newlines, and if either string is empty (blank line) we still can't do any work, but we just continue to the next available line.
A modified version of your sed command. We construct the command string on each loop for the source and replacement strings, and tack on the tml file string. Bear in mind this is a very naive approach to the replacement. It really expects your replacement strings to be safe characters and not break the s///g sed format. But we run that with another subprocess command. The wait() simply waits for the return code, and we check it for an error. This approach replaces your os.system() version.
Hope this helps. Eventually you can improve this to do more checking and safe operations.