I'm editing a repository that doesn't use Prettier, but my editor (Emacs) loads prettier-js-mode based on file extension. So when saving a file I get a bunch of whitespace changes that I can't commit as it would polute the upstream repository.
My idea so far is to add a local .prettierrc file that disables Prettier, then add it to my .git/config/exclude file so upstream doesn't have to know about it.
But how do I craft such a file?
In my case I'd like to have a file in the project's root directory that would disable Prettier for the whole project, but I can also see how others might wish for a way to do the same thing for a subdirectory.
What about adding the .prettierignore with a * in it?
prettier-js-mode should have a config to only enable itself when it finds prettier config in the root or in package.json. The same as vscode and atom plugins do. If it doesn't have this feature it would be nice to open an issue or a PR.
The accepted answer is kinda hacky, but sure it will work too.
Related
The Prettier docs say to use --use-tabs to override the default behavior. WebStorm automatically populated the Prettier package:
That's a folder. I tried changing it to npm\prettier.cmd and adding the switch, but that doesn't work (It just turns red).
How can I set WebStorm to use tabs with Prettier?
If your project has a .editorconfig file, you can override the indent_style setting in there.
# top-most EditorConfig file
root = true
[*]
indent_size = 4
indent_style = tab
I found these resources helpful too:
https://prettier.io/docs/en/options.html#tabs
https://editorconfig.org/
Due to https://github.com/prettier/prettier/pull/2434 fix, Prettier (even global!) uses configuration file nearest to current file (up the directory tree) when formatting.
So, you can install it globally and configure it in your project, by adding the corresponding .prettierrc file or "prettier" section in project package.json.
I'm using Xcode (with C++) and my project layout (in the file system, not in Xcode) looks like this:
SubfolderA
-file_A_1, file_A_2
SubfolderB
-file_B_1, file_B_2
Right now I've set up this structure in Xcode via groups. And so, when I want to include file_A_2 in file_B_1, I write #include "file_A_2" in file_B_1.
Is there some way to make an inclusion look like #include "/SubfolderA/file_A_2", so that I can easily see to what directory/subfolder an included file belongs?
One way to see what's going on is to look at the Build Log and expand the line for compiling sourcefile.m. Look at the -I options being passed to the compiler.
If it's not to your liking you can add the source tree in the Build Settings > Header Search Paths to include $(ProjectDir)/srcroot and make it recursive, which saves you from adding each sub-folder individually.
In my experience this has never been necessary, however, as far as I can remember.
As far as the Xcode folders are concerned, if the top-level source folder is added then all sub-folders are automatically added when you add them to the filesystem, saving the hassle of keeping them in sync. You might need to add the top-level folder under the Source Files group for this to work, however.
Surprisingly, in Xcode's Build Settings I've added to User Header Search Paths non-recursive path to my project. This solved my problem.
I ended up here when I was having an issue with XCode while trying to include a header in a group by doing
#include "MyGroup/MyHeader.h"
Turns out the project structure and the file system weren't in sync, so I just had to remove my group from the project, put it in the correct place in Finder, then drag and drop it back into the project in the correct place and it worked for me.
I'm not sure if this is necessary or not, but I also have already set up my app's working directory because I am doing some game programming and need to be able to load in .png and make textures.
Using .gitignore, is there a way to ignore a directory if it contains a certain file (or directory)?
This would be something like look-ahead assertions, though my use case is a little different: I want to ignore Mercurial repos in my project, to keep from accidentally committing them as part of the project. That is, I want to ignore all directories containing .hg, not just .hg itself.
I can work around this using the answer from this question, adding each directory name to .gitignore, but I'd like to make it more general if I can.
There is no way to do it beside adding all of them to your .gitignore file.
What you can do it to write a scipt which append all the desired paths to your .gitignore.
The content of .gitignore is alist of paths so git can be configured based upon content.
Each line in a gitignore file specifies a pattern
i just installed YouCompleteMe for Vim through vundle. It works, but it shows only the words contained in the current file. I want to use it to develop c++ programs, how can i configure it to show autocompletion from c++ headers file in /usr/include for example? Thanks a lot.
You need to navigate to ~/.vim/bundles/YouCompleteMe and run the installation script with --clang-completer, so do ./install.sh --clang-completer. After it finishes you should have support for C like languages.
You may also need to place let g:ycm_global_ycm_extra_conf = '~/.vim/bundle/YouCompleteMe/cpp/ycm/.ycm_extra_conf.py' in your ~/.vimrc.
I have installed with pathogen. I tried the above instructions with ./install.sh --clang-complete. After this, it did not work, and I indeed had to add the path. But it was different than in another reply here, namely
let g:ycm_global_ycm_extra_conf = '.vim/bundle/YouCompleteMe/third_party/ycmd/cpp/ycm/.ycm_extra_conf.py'
so there is an extra "third_party/ycmd" in the path.
While the suggestions here might work in the beginning, I am not sure it's the proper way to go. According to YCM developer, whenever you start a project, you need a new .ycm_extra_conf.py file
From https://valloric.github.io/YouCompleteMe/#ubuntu-linux-x64-super-quick-installation
YCM looks for a .ycm_extra_conf.py file in the directory of the opened file or in any directory above it in the hierarchy (recursively); when the file is found, it is loaded (only once!) as a Python module. YCM calls a FlagsForFile method in that module which should provide it with the information necessary to compile the current file. You can also provide a path to a global .ycm_extra_conf.py file, which will be used as a fallback. To prevent the execution of malicious code from a file you didn't write YCM will ask you once per .ycm_extra_conf.py if it is safe to load. This can be disabled and you can white-/blacklist files. See the Options section for more details.
While you might only need to modify the compile flags from the vanilla .ycm_extra_conf.py, I feel it is advisable to create a new file for every project you start.
Everything that the folks here have said is correct. I just want to add that as of 2017, the "install.sh" script is deprecated. Now, you have to use the install.py script instead by typing
./install.py --clang-completer
Also, in your .vimrc file, instead of ".vim/bundle/blahblahblah", you'll need to add a "~/" in front of the address by adding:
let g:ycm_global_ycm_extra_conf = "~/.vim/bundle/YouCompleteMe/third_party/ycmd/cpp/ycm/.ycm_extra_conf.py"
to your .vimrc file, to give it an absolute path from the Home directory so that Vim can find the ".ycm_extra_conf.py" file. Otherwise, you might experience some funny behavior.
I just wanted to add if you don't want to manually define a config file there is this neat little repository that will auto generate it. https://github.com/rdnetto/YCM-Generator
I have a django project that I have been working on as a solo developer, and have been using TortoiseSVN to keep the code managed in a repository on a work server. I work on this on a local installation of django etc.
There is now a second person who will be working on this project, and the possibility of working on some other PCs.
Now, there should, for the time being, only be one development version (branch?) of this project, but the configuration file (settings.py) will need to be different on each computer that is being used. I want to create one local version of this file on each PC which should not need to be changed again.
How can I set the repository (preferably within TortoiseSVN) to exclude this one file? E.g. the repository should not include settings.py. When a checkout occurs, it should update all files in the local folder but not change/remove the local copy of settings.py. When a commit occurs, settings.py should be ignored and not uploaded.
At the moment settings.py is overwritten/updated as per any other file in the project folder/repository.
Any nudges in the right direction would be useful - I'm new to SVN generally and would like to know if this is something that's going to need detailed understanding of branching or if there is a simpler way.
Thanks
In TortoiseSVN, when you try to commit your files, in the file list dialog, right click the file and look for the Ignore option. You can ignore by complete filename or extension.
If the file is already in the repository, and you want to remove it from there and ignore it, you can simply right-click the file and in the TortoiseSVN menu look for the 'Delete and add to ignore list' option.
You'll be looking for the svn:ignore property, which tells subversion to not version files matching a pattern or patterns you specify.
There's some guidance on using it with TortoiseSVN at:
http://arcware.net/tortoisesvn-global-ignore-pattern-vs-svn-ignore/
These should help:
I have a file in my project that every developer must change, but I don't want those local mods to ever be committed. How can I make 'svn commit' ignore the file?
Excluding Items from the Commit List
The typical solution is to do what bgever said and ignore the settings file itself, and then commit a file with example values, something like settings.py.example. That file should only be updated when you add or remove settings. When deploying, you'd copy that to settings.py and edit the values.