I want to do serial communication in the QT inside, according to the number of serial ports to dynamically generate label, LineEdit, Button, and these three buttons can pull down the scroll bar when the size of the interface, how to do well, I write this below is dead of.
The effect of encapsulation into a method
The interface was washed last
Define QGridLayout insude QScrollArea. And add your new widgets into
that layout in code. QGridLayout::addWidget
Define table where you will show several widgets in table cells. That real complicated way.
void BaseUi::BaseScrollArea()
{
QScrollArea *pArea = new QScrollArea();
QWidget *pWidget = new QWidget();
pWidget->setStyleSheet("QWidget" "{background:white;}");
m_vbox_layout = new QVBoxLayout();
m_vbox_layout->addSpacerItem(new QSpacerItem(100, 30,
QSizePolicy::Expanding, QSizePolicy::Expanding));
pWidget->setLayout(m_vbox_layout);
pArea->setWidget(pWidget);
pArea->setWidgetResizable(true);
m_main_layout = new QVBoxLayout();
m_main_layout->addWidget(pArea);
}
void BaseUi::addAutoRecordUi(QString lab_neme, QString ledit_name)
{
QWidget *page = new QWidget;
QGridLayout *layout = new QGridLayout(page);
QLabel *label = new QLabel;
label->setText(lab_neme);
label->setFont(font());
QLineEdit *ledit = new QLineEdit;
ledit->setText(ledit_name);
ledit->setFont(font());
layout->addWidget(label, 0, 1);
layout->addWidget(ledit, 0, 2);
page->setLayout(layout);
m_vbox_layout->insertWidget(m_vbox_layout->count()-1, page);
}
void BaseUi::addMulRecordUi(QString lab_neme, QString ledit_name, QString
but_name)
{
QWidget *page = new QWidget;
QGridLayout *layout = new QGridLayout(page);
QLabel *label = new QLabel;
label->setText(lab_neme);
label->setFont(font());
QLineEdit *ledit = new QLineEdit;
ledit->setText(ledit_name);
ledit->setFont(font());
QPushButton *but = new QPushButton(but_name);
but->setFont(font());
layout->addWidget(label, 0, 1);
layout->addWidget(ledit, 0, 2);
layout->addWidget(but, 0, 3);
page->setLayout(layout);
m_vbox_layout->insertWidget(m_vbox_layout->count()-1, page);
}
Related
This is my code :
void maquette::on_btn_edit_clicked()
{
QWidget* wdg = new QWidget;
wdg->resize(320, 340);
wdg->setWindowTitle("Modiffier");
QLabel label1("matricule", wdg);
label1.setGeometry(100, 100, 100, 100);
wdg->show();
}
the window shows up but the label didn't show
void maquette::on_btn_edit_clicked()
{
QWidget *wdg = new QWidget;
wdg->resize(320,340);
wdg->setWindowTitle("Modiffier");
QLabel *label1 = new QLabel("matricule",wdg);
label1->setGeometry(100, 100, 100, 100);
wdg->show();
}
You can either add the QLabel using parenting. as mentioned before.
QLabel *label1 = new QLabel("matricule",wdg);
or
QLabel *label1 = new QLabel("matricule");
label1->setParent(wdg);
This will make the widget float inside its parent.
You can also add the QLabel to a layout that has been assigned to the QWidget.
QVBoxLayout* layout = new QVBoxLayout();
wdg->setLayout(layout);
QLabel *label1 = new QLabel("matricule");
layout->addWidget(label1);
This will add the widget to the layout.
The layout will control how the child widgets are laid out.
I want to add a QLineEdit to a QTabWidget but I always get a
Segmentation fault, SIGSEGV
I did it the following way:
QHBoxLayout *layout = new QHBoxLayout;
QWidget *Tab = new QWidget(ui->tabWidget);
ui->tabWidget->addTab(Tab, "Tab1");
Tab->setLayout(layout);
QLineEdit *lE = new QLineEdit();
lE->setObjectName("Text");
lE->setText("Hello");
ui->tabWidget->widget(0)->layout()->addWidget(lE);
This way works for adding a QPushButton but somehow it doesn't work for a QLineEdit.
you can add a widget to a cell
example:
//
QWidget* pWidget = new QWidget();
QLineEdit* foo = new QLineEdit(this);
foo->setText("Edit");
QHBoxLayout* pLayout = new QHBoxLayout(pWidget);
pLayout->addWidget(foo);
pLayout->setAlignment(Qt::AlignCenter);
pLayout->setContentsMargins(0, 0, 0, 0);
pWidget->setLayout(pLayout);
this->ui->myTable->setCellWidget(1, 1, pWidget);
What I currently have:
What I want:
For those unable to view the images; the widgets are spread out by some sort of margin between them. I would like to keep them as close as possible. How can I squeeze the widgets closer together?
I have already tried:
setFixedSize(sizeHint()); and setSizeConstraint(QLayout::SetFixedSize); on the main window, layouts, and widget object. Nothing seems to work.
As an extra, I would also appreciate this:
(having the label get even closer to the lineEdit)
I am using Windows and Qt 5.11.1, 64-bits.
The window constructor code:
MainWindow::MainWindow(QWidget *parent)
: QMainWindow(parent)
{
widget = new QWidget();
label = new QLabel(tr("Enter your name:"));
nameLine = new QLineEdit;
nameLine->setMinimumWidth(250);
label->setBuddy(nameLine);
okButton = new QPushButton (tr("Ok"));
clearButton = new QPushButton (tr("Clear"));
connect(okButton, SIGNAL(clicked()), this, SLOT(message()));
connect(clearButton, SIGNAL(clicked()), this, SLOT(clear()));
QGridLayout *grid = new QGridLayout;
grid->addWidget(label,0,0);
grid->addWidget(nameLine,1,0);
grid->addWidget(okButton,0,1);
grid->addWidget(clearButton,1,1);
widget->setLayout(grid);
setWindowTitle(tr("Leo v0.0"));
setCentralWidget(widget);
}
A possible solution is to establish a QVBoxLayout with addStretch():
QVBoxLayout *vlay = new QVBoxLayout;
QGridLayout *grid = new QGridLayout;
grid->addWidget(label, 0, 0);
grid->addWidget(nameLine, 1, 0);
grid->addWidget(okButton, 0, 1);
grid->addWidget(clearButton, 1, 1);
vlay->addLayout(grid);
vlay->addStretch();
widget->setLayout(vlay);
setCentralWidget(widget);
delete layout();
QGridLayout *gridLayout = new QGridLayout(this);
int cont = 0;
for (Category c : categories) {
cont++;
QVBoxLayout *verticalLayout;
verticalLayout = new QVBoxLayout();
gridLayout->setSpacing(cont);
gridLayout->addLayout(verticalLayout, 0, cont - 1);
QLabel *l;
l = new QLabel();
l->setText(c.getName());
l->setAlignment(Qt::AlignCenter);
verticalLayout->addWidget(l);
}
In mainWindow, I want to add one gridLayout and verticalLayout with a label when using for cycle in my categories
You didn't set the layout to any widget. You have to call function setLayout(gridLayout) for the widget you want to apply it on. Hope it helps
Can I add some widgets like QLabel and QPushButton into a QTabWidget?
Actually, I want to do something like this:
I'm using C++ and Qt.
Thanks
It's possible, just use QTabWidget::setCornerWidget.
Quick example:
QWidget* pTabCornerWidget = new QWidget(this);
QLabel* pLabelTime = new QLabel(pTabCornerWidget);
pLabelTime->setText("10:22:20");
QPushButton* pButton = new QPushButton(pTabCornerWidget);
pButton->setText("?");
pButton->setMaximumSize(QSize(25, 25));
QHBoxLayout* pHLayout = new QHBoxLayout(pTabCornerWidget);
pHLayout->addWidget(pLabelTime);
pHLayout->addWidget(pButton);
mUI.tabWidget->setCornerWidget(pTabCornerWidget, Qt::TopRightCorner);
If you want do this stuff, I recommend you use QTabBar instead of QTabWidget. For example, your code can be (remember, that it's just a very simple example):
// Here some first widget
QWidget *wid1 = new QWidget(this);
QHBoxLayout *wid1Lay = new QHBoxLayout(wid1);
wid1Lay->addWidget(new QLabel(tr("Widget1")));
// Here some second widget
QWidget *wid2 = new QWidget(this);
QHBoxLayout *wid2Lay = new QHBoxLayout(wid2);
wid2Lay->addWidget(new QLabel(tr("Widget2")));
// Here some third widget
QWidget *wid3 = new QWidget(this);
QHBoxLayout *wid3Lay = new QHBoxLayout(wid3);
wid3Lay->addWidget(new QLabel(tr("Widget3")));
// Here your Tab bar with only bars
QTabBar *bar = new QTabBar(this);
bar->addTab("One");
bar->addTab("Two");
bar->addTab("Three");
// Here some label (for example, current time) and button
QLabel *lab = new QLabel(tr("Some text"), this);
QPushButton *but = new QPushButton(tr("Push"), this);
// Main layouts
QVBoxLayout *vLay = new QVBoxLayout(ui->centralWidget);
QHBoxLayout *hLay = new QHBoxLayout();
vLay->addLayout(hLay);
hLay->addWidget(bar);
// Spacer for expanding left and right sides
hLay->addItem(new QSpacerItem(0, 0, QSizePolicy::Expanding, QSizePolicy::Minimum));
hLay->addWidget(lab);
hLay->addWidget(but);
vLay->addWidget(wid1);
vLay->addWidget(wid2);
vLay->addWidget(wid3);
// Some simple connect with lambda for navigation
connect(bar, &QTabBar::currentChanged, [=] (int index) {
wid1->setVisible(false);
wid2->setVisible(false);
wid3->setVisible(false);
switch(index) {
case 0: wid1->setVisible(true);
break;
case 1: wid2->setVisible(true);
break;
case 2: wid3->setVisible(true);
break;
default:{}
}
});
emit bar->currentChanged(0);