I'm building a regex to be able to parse addresses and am running into some blocks. An example address I'm testing against is:
5173B 63rd Ave NE, Lake Forest Park WA 98155
I am looking to capture the house number, street name(s), city, state, and zip code as individual groups. I am new to regex and am using regex101.com to build and test against, and ended up with:
(^\d+\w?)\s((\w*\s?)+).\s(\w*\s?)+([A-Z]{2})\s(\d{5})
It matches all the groups I need and matches the whole string, but there are extra groups that are null value according to the match information (3 and 4). I've looked but can't find what is causing this issue. Can anyone help me understand?
Your regex expression was almost good:
(^\d+\w?)\s([\w*\s?]+).\s([\w*\s?]+)\s([A-Z]{2})\s(\d{5})
What I changed are the second and third groups: in both you used a group inside a group ((\w*\s?)+), where a class inside a group (([\w*\s?]+)) made sure you match the same things and you get the proper group content.
With your previous syntax, the inner group would be able to match an empty substring, since both quantifiers allow for a zero-length match (* is 0 to unlimited matches and ? is zero or one match). Since this group was repeated one or more times with the +, the last occurrence would match an empty string and only keep that.
For this you'll need to use a non-capturing group, which is of the form (?:regex), where you currently see your "null results". This gives you the regex:
(^\d+\w?)\s((?:\w*\s?)+).\s(?:\w*\s?)+([A-Z]{2})\s(\d{5})
Here is a basic example of the difference between a capturing group and a non-capturing group: ([^s]+) (?:[^s]+):
See how the first group is captured into "Group 1" and the second one is not captured at all?
Matching an address can be difficult due to the different formats.
If you can rely on the comma to be there, you can capture the part before it using a negated character class:
^(\d+[A-Z]?)\s+([^,]+?)\s*,\s*(.+?)\s+([A-Z]{2})\s(\d{5})$
Regex demo
Or take the part before the comma that ends on 2 or more uppercase characters, and then match optional non word characters using \W* to get to the first word character after the comma:
^(\d+[A-Z]?)\s+(.*?\b[A-Z]{2,}\b)\W*(.+?)\s+([A-Z]{2})\s(\d{5})$
Regex demo
I am trying to extract a word from the string which contains a specific word from the list.
For example, there is string "RR_SM_Brand_A_Additive_Clean_jun2020", and the list is Brand_A, Brand_B, Brand_C etc.
When I test RegExp, I receive 3 groups as output not 1 value (Brand_A): https://regexr.com/5tcp7
Code: (.*)(Brand_A|Brand_B)(.*)
I am very new to Regex and I am confused how can I extract only one value: Brand_A
If you don't need to capture the surrounding text, leave them out of the regexp. A regular expression will match anywhere in the input.
Brand_A|Brand_B
In this case, the matches will be in group 0.
Some languages automatically anchor the regexp. In that case, you can put .* around this, but don't put them in capture groups.
.*(Brand_A|Brand_B).*
Try this simple one:
(?:Brand_A|Brand_B)
You are almost right, you need to add non-capturing group (?:) for your outside groups:
(?:.*)(Brand_A|Brand_B)(?:.*)
https://regexr.com/5tcpa
How are non-capturing groups, i.e., (?:), used in regular expressions and what are they good for?
Let me try to explain this with an example.
Consider the following text:
http://stackoverflow.com/
https://stackoverflow.com/questions/tagged/regex
Now, if I apply the regex below over it...
(https?|ftp)://([^/\r\n]+)(/[^\r\n]*)?
... I would get the following result:
Match "http://stackoverflow.com/"
Group 1: "http"
Group 2: "stackoverflow.com"
Group 3: "/"
Match "https://stackoverflow.com/questions/tagged/regex"
Group 1: "https"
Group 2: "stackoverflow.com"
Group 3: "/questions/tagged/regex"
But I don't care about the protocol -- I just want the host and path of the URL. So, I change the regex to include the non-capturing group (?:).
(?:https?|ftp)://([^/\r\n]+)(/[^\r\n]*)?
Now, my result looks like this:
Match "http://stackoverflow.com/"
Group 1: "stackoverflow.com"
Group 2: "/"
Match "https://stackoverflow.com/questions/tagged/regex"
Group 1: "stackoverflow.com"
Group 2: "/questions/tagged/regex"
See? The first group has not been captured. The parser uses it to match the text, but ignores it later, in the final result.
EDIT:
As requested, let me try to explain groups too.
Well, groups serve many purposes. They can help you to extract exact information from a bigger match (which can also be named), they let you rematch a previous matched group, and can be used for substitutions. Let's try some examples, shall we?
Imagine you have some kind of XML or HTML (be aware that regex may not be the best tool for the job, but it is nice as an example). You want to parse the tags, so you could do something like this (I have added spaces to make it easier to understand):
\<(?<TAG>.+?)\> [^<]*? \</\k<TAG>\>
or
\<(.+?)\> [^<]*? \</\1\>
The first regex has a named group (TAG), while the second one uses a common group. Both regexes do the same thing: they use the value from the first group (the name of the tag) to match the closing tag. The difference is that the first one uses the name to match the value, and the second one uses the group index (which starts at 1).
Let's try some substitutions now. Consider the following text:
Lorem ipsum dolor sit amet consectetuer feugiat fames malesuada pretium egestas.
Now, let's use this dumb regex over it:
\b(\S)(\S)(\S)(\S*)\b
This regex matches words with at least 3 characters, and uses groups to separate the first three letters. The result is this:
Match "Lorem"
Group 1: "L"
Group 2: "o"
Group 3: "r"
Group 4: "em"
Match "ipsum"
Group 1: "i"
Group 2: "p"
Group 3: "s"
Group 4: "um"
...
Match "consectetuer"
Group 1: "c"
Group 2: "o"
Group 3: "n"
Group 4: "sectetuer"
...
So, if we apply the substitution string:
$1_$3$2_$4
... over it, we are trying to use the first group, add an underscore, use the third group, then the second group, add another underscore, and then the fourth group. The resulting string would be like the one below.
L_ro_em i_sp_um d_lo_or s_ti_ a_em_t c_no_sectetuer f_ue_giat f_ma_es m_la_esuada p_er_tium e_eg_stas.
You can use named groups for substitutions too, using ${name}.
To play around with regexes, I recommend http://regex101.com/, which offers a good amount of details on how the regex works; it also offers a few regex engines to choose from.
You can use capturing groups to organize and parse an expression. A non-capturing group has the first benefit, but doesn't have the overhead of the second. You can still say a non-capturing group is optional, for example.
Say you want to match numeric text, but some numbers could be written as 1st, 2nd, 3rd, 4th,... If you want to capture the numeric part, but not the (optional) suffix you can use a non-capturing group.
([0-9]+)(?:st|nd|rd|th)?
That will match numbers in the form 1, 2, 3... or in the form 1st, 2nd, 3rd,... but it will only capture the numeric part.
?: is used when you want to group an expression, but you do not want to save it as a matched/captured portion of the string.
An example would be something to match an IP address:
/(?:\d{1,3}\.){3}\d{1,3}/
Note that I don't care about saving the first 3 octets, but the (?:...) grouping allows me to shorten the regex without incurring the overhead of capturing and storing a match.
HISTORICAL MOTIVATION:
The existence of non-capturing groups can be explained with the use of parenthesis.
Consider the expressions (a|b)c and a|bc, due to priority of concatenation over |, these expressions represent two different languages ({ac, bc} and {a, bc} respectively).
However, the parenthesis are also used as a matching group (as explained by the other answers...).
When you want to have parenthesis but not capture the sub-expression you use NON-CAPTURING GROUPS. In the example, (?:a|b)c
Let me try this with an example:
Regex Code: (?:animal)(?:=)(\w+)(,)\1\2
Search String:
Line 1 - animal=cat,dog,cat,tiger,dog
Line 2 - animal=cat,cat,dog,dog,tiger
Line 3 - animal=dog,dog,cat,cat,tiger
(?:animal) --> Non-Captured Group 1
(?:=)--> Non-Captured Group 2
(\w+)--> Captured Group 1
(,)--> Captured Group 2
\1 --> result of captured group 1 i.e In Line 1 is cat, In Line 2 is cat, In Line 3 is dog.
\2 --> result of captured group 2 i.e comma (,)
So in this code by giving \1 and \2 we recall or repeat the result of captured group 1 and 2 respectively later in the code.
As per the order of code (?:animal) should be group 1 and (?:=) should be group 2 and continues..
but by giving the ?: we make the match-group non captured (which do not count off in matched group, so the grouping number starts from the first captured group and not the non captured), so that the repetition of the result of match-group (?:animal) can't be called later in code.
Hope this explains the use of non capturing group.
It makes the group non-capturing, which means that the substring matched by that group will not be included in the list of captures. An example in ruby to illustrate the difference:
"abc".match(/(.)(.)./).captures #=> ["a","b"]
"abc".match(/(?:.)(.)./).captures #=> ["b"]
Groups that capture you can use later on in the regex to match OR you can use them in the replacement part of the regex. Making a non-capturing group simply exempts that group from being used for either of these reasons.
Non-capturing groups are great if you are trying to capture many different things and there are some groups you don't want to capture.
Thats pretty much the reason they exist. While you are learning about groups, learn about Atomic Groups, they do a lot! There is also lookaround groups but they are a little more complex and not used so much.
Example of using later on in the regex (backreference):
<([A-Z][A-Z0-9]*)\b[^>]*>.*?</\1> [ Finds an xml tag (without ns support) ]
([A-Z][A-Z0-9]*) is a capturing group (in this case it is the tagname)
Later on in the regex is \1 which means it will only match the same text that was in the first group (the ([A-Z][A-Z0-9]*) group) (in this case it is matching the end tag).
tl;dr non-capturing groups, as the name suggests are the parts of the regex that you do not want to be included in the match and ?: is a way to define a group as being non-capturing.
Let's say you have an email address example#example.com. The following regex will create two groups, the id part and #example.com part. (\p{Alpha}*[a-z])(#example.com). For simplicity's sake, we are extracting the whole domain name including the # character.
Now let's say, you only need the id part of the address. What you want to do is to grab the first group of the match result, surrounded by () in the regex and the way to do this is to use the non-capturing group syntax, i.e. ?:. So the regex (\p{Alpha}*[a-z])(?:#example.com) will return just the id part of the email.
A Simple Answer
Use them to ensure one of several possibilities occur here (?:one|two) or an optional phrase camp(?:site)? or in general, anywhere you want to establish a group/phrase/section without needing to refer to it specifically.
They keep your captured group(s) count to a minimum.
I cannot comment on the top answers to say this: I would like to add an explicit point which is only implied in the top answers:
The non-capturing group (?...)
does not remove any characters from the original full match, it only reorganises the regex visually to the programmer.
To access a specific part of the regex without defined extraneous characters you would always need to use .group(<index>)
Well I am a JavaScript developer and will try to explain its significance pertaining to JavaScript.
Consider a scenario where you want to match cat is animal
when you would like match cat and animal and both should have a is in between them.
// this will ignore "is" as that's is what we want
"cat is animal".match(/(cat)(?: is )(animal)/) ;
result ["cat is animal", "cat", "animal"]
// using lookahead pattern it will match only "cat" we can
// use lookahead but the problem is we can not give anything
// at the back of lookahead pattern
"cat is animal".match(/cat(?= is animal)/) ;
result ["cat"]
//so I gave another grouping parenthesis for animal
// in lookahead pattern to match animal as well
"cat is animal".match(/(cat)(?= is (animal))/) ;
result ["cat", "cat", "animal"]
// we got extra cat in above example so removing another grouping
"cat is animal".match(/cat(?= is (animal))/) ;
result ["cat", "animal"]
To complement other good answers in this thread, I want to add an interesting observation that I came across.
Finding: You can have a capturing group inside a non-capturing group.
Problem Details: Have a look at below regex for matching web urls:
var parse_url_regex = /^(?:([A-Za-z]+):)(\/{0,3})([0-9.\-A-Za-z]+)(?::(\d+))?(?:\/([^?#]*))?(?:\?([^#]*))?(?:#(.*))?$/;
Here is my input url string:
var url = "http://www.ora.com:80/goodparts?q#fragment";
The first group in my regex (?:([A-Za-z]+):) is a non-capturing group which matches the protocol scheme (http) and colon (:) character. In continuation it becomes http:. But when I ran below code:
console.debug(parse_url_regex.exec(url));
I could see that the 1st index of the returned array was containing the string http instead (Refer screenshot).
At this point, my thinking was that http and colon : both will not get reported in the output as they are inside a non-capturing group. If the first regex group (?:([A-Za-z]+):) is a non-capturing group then why it is returning http string in the output array?
Explanation: So if you notice, ([A-Za-z]+) is a capturing group (not having ?: at the beginning). But this capturing group is itself inside a non-capturing group (?:([A-Za-z]+):) followed by a : character. That's why the text http still gets captured but the colon : character which is falling inside the non-capturing group (but outside the capturing group ) doesn't get reported in the output array.
In complex regular expressions you may have the situation arise where you wish to use a large number of groups some of which are there for repetition matching and some of which are there to provide back references. By default the text matching each group is loaded into the backreference array. Where we have lots of groups and only need to be able to reference some of them from the backreference array we can override this default behaviour to tell the regular expression that certain groups are there only for repetition handling and do not need to be captured and stored in the backreference array.
(?: ... ) acts as a group ( ... ) but doesn't capture the matched data. It's really much more efficient than a standard capture group. It is use when you want to group something but don't need to reuse it later. #Toto
Let me take to you an example of geo coordinate, the below matches two groups
Latitude,Longitude
([+-]?\d+(?:\.\d+)?),([+-]?\d+(?:\.\d+)?)
Lets take one ([+-]?\d+(?:\.\d+)?)
co-ordinate can be whole number like 58 or could be 58.666
Hence the optional (.666) second part (\.\d+)? is mentioned.
(...)? - for optional
But it is parenthesised, that will be another group of match. and we dont want two matches one for 58 and another for .666, we need single latitude as match. Here comes non-capturing group (?:)
with non-capturing group [+-]?\d+(?:\.\d+)?, 58.666 and 58 both are single match
Its extremely simple, We can understand with simple date example, suppose if the date is mentioned as 1st January 2019 or 2nd May 2019 or any other date and we simply want to convert it to dd/mm/yyyy format we would not need the month's name which is January or February for that matter, so in order to capture the numeric part, but not the (optional) suffix you can use a non-capturing group.
so the regular expression would be,
([0-9]+)(?:January|February)?
Its as simple as that.
I think I would give you the answer. Don't use capture variables without checking that the match succeeded.
The capture variables, $1, etc, are not valid unless the match succeeded, and they're not cleared, either.
#!/usr/bin/perl
use warnings;
use strict;
$_ = "bronto saurus burger";
if (/(?:bronto)? saurus (steak|burger)/)
{
print "Fred wants a $1";
}
else
{
print "Fred dont wants a $1 $2";
}
In the above example, to avoid capturing bronto in $1, (?:) is used.
If the pattern is matched , then $1 is captured as next grouped pattern.
So, the output will be as below:
Fred wants a burger
It is Useful if you don't want the matches to be saved.
Open your Google Chrome devTools and then Console tab: and type this:
"Peace".match(/(\w)(\w)(\w)/)
Run it and you will see:
["Pea", "P", "e", "a", index: 0, input: "Peace", groups: undefined]
The JavaScript RegExp engine capture three groups, the items with indexes 1,2,3. Now use non-capturing mark to see the result.
"Peace".match(/(?:\w)(\w)(\w)/)
The result is:
["Pea", "e", "a", index: 0, input: "Peace", groups: undefined]
This is obvious what is non capturing group.
I have a response:
MS1:111980613994
124 MS2:222980613994124
I have the following regex:
MS\d:(\d(?:\r?\n?)){15}
According to Regex, the "(?:\r?\n?)" part should let it match for the group but exclude it from the capture (so I get a contiguous value from the group).
Problem is that for "MS1:xxx" it matches the [CR][LF] and includes it in the group. It should be excluded from the capture ...
Help please.
The (?:...) syntax does not mean that the enclosed pattern will be excluded from any capture groups that enclose the (?:...).
It only means that that the group formed by (?:...) will be a non-capturing group, as opposed to a new capture group.
Put another way:
(?:...) only groups
(...) has two functions: it both groups and captures.
Capture groups capture all of the text matched by the pattern they enclose, even the parts that are matched by nested groups (whether they are capturing or not).
An example
With the regex...
.*(l.*(o.*o).*l).*
...there are two capture groups. If we match this against hello world we get the following captures:
1: lo worl
2: o wo
Note that the text captured by group 2 is also captured by group 1.
If we change the inner group to be non-capturing...
.*(l.*(?:o.*o).*l).*
...group 1's capture will not be changed (when matched against the same string), but there is no longer a group 2:
1: lo worl
As you can see, if a non-capturing group is enclosed by a capture group, that enclosing capture group will capture the characters matched by the non-capturing group.
What are they For?
The purpose of non-capturing groups is not to exclude content from other capturing groups, but rather to act as a way to group operations without also capturing.
For example, if you want to repeat a substring, you might write (?:substring)*.
How do I solve my real problem?
If you really want to ignore embedded \rs and \ns your best bet is to strip them out in a second step. You don't say what language you're using, but something equivalent to this (Python) should work:
s = re.sub(r'[\r\n]', '', s)
Perhaps what you mean to do here is place the [CR][LF] matching part outside of the captured group, something like: MS\d:(\d){15}(?:\r?\n?)
So far as I know, you'll have to use 2 regexes. One is "MS\d:(\d(?:\r?\n?)){15}", the other is used to remove the line breaks from the matches.
Please refer to "Regular expression to skip character in capture group".
How about MS\d:(?:(\d)\r?\n?){15}