Very simple code(fibonachi sequence):
root#u2:~# crystal build fibo.cr
root#u2:~# crystal build fibo.cr --release
crystal: /var/cache/omnibus/src/llvm/llvm-3.8.1.src/lib/CodeGen/LexicalScopes.cpp:160: llvm::LexicalScope* llvm::LexicalScopes::getOrCreateRegularScope(const llvm::DILocalScope*): Assertion `cast<DISubprogram>(Scope)->describes(MF->getFunction())' failed.
/usr/bin/crystal: строка 102: 1929 Аварийный останов (стек памяти сброшен на диск) "$INSTALL_DIR/embedded/bin/crystal" "$#"
Is it something wrong with optimizer?
I run this on VM with 4GB RAM.
You've hit a known bug we're trying to fix.
The workaround that's proven to work is to use --release always with --no-debug, or to avoid it at all.
Related
Good afternoon. Tell me who build Chromium om Windows. It is required to brand Chromium (start page, bookmarks, tray icons, name), collect according to the instructions at the site chromium. When assembling through VS 2015, the following error list appears. The assembly takes place on the server, 64 GB RAM, Intel Xeon.
The compilation goes to 60-70%, after which VS crashes, restarts and gives an error: "The following files can not be found - all.sln - so they will not be loaded" - after this error the assembly stops, I tried 10 times already.
Ninja: build stopped: subcommand failed. Warning: premature end of file; Recovering
FAILED: obj / third_party / yasm / yasm_utils / xmalloc.obj
First, try running the build from command line:
ninja -C src/out/Default
If it still fails, make sure you carefully followed prerequisites installation instructions. Specifically, try gclient sync -f and make sure it finished normally before building.
I'm new to running SonarQube scans and I get this error message in the log in Jenkins:
16:17:39 16:17:36.926 ERROR - The only way to get an accurate analysis of your C/C++/Objective-C project is by using the SonarSource build-wrapper. If for any reason, the use of the build-wrapper is not possible on your project, you can bypass it with the help of the "sonar.cfamily.build-wrapper-output.bypass=true" property. By using that property, you'll switch to an "at best" mode that could result in false-positives and false-negatives.
Can someone please advise where I can find and run this SonarSource build-wrapper?
Thanks a lot for your help!
To solve this issue, download the Build Wrapper directly from your SonarQube Server, so that its version perfectly matches your version of the plugin:
Build Wrapper for Linux can be downloaded from URL
http://localhost:9000/static/cpp/build-wrapper-linux-x86.zip
Unzip the downloaded Build Wrapper,
Configure it in your PATH because it's just more convenient
export PATH=$PATH:/path/where/you/unzip
Once done, Run below commands.
build-wrapper-linux-x86-64 --out-dir <dir-name> <build-command>
build-wrapper-linux-x86-64 --out-dir build_output make clean all
Once all this done, you have to modify your sonar-project.properties file with following line. Note the dir-name is same directory which we defined in previous command.
sonar.cfamily.build-wrapper-output=<dir-name>
and then you can run the sonar scanner command.
sonar-scanner
this will do the analysis against your code. For more details, you can check this link.
Contacted support, turns out this was caused by missing the argument sonar.cfamily.build-wrapper-output in the scanner begin command.
Build wrapper downloads:
Linux: https://sonarcloud.io/static/cpp/build-wrapper-linux-x86.zip
macOS: https://sonarcloud.io/static/cpp/build-wrapper-macosx-x86.zip
Windows: https://sonarcloud.io/static/cpp/build-wrapper-win-x86.zip
Some links covering how to run the build wrapper:
https://docs.sonarqube.org/latest/analysis/languages/cfamily/
https://blog.sonarsource.com/with-great-power-comes-great-configuration/
I tried to install workspace-d on Windows 10 using Administrator privilege but failed.
Here is the error message.I haved installed dmd, dub and git.
PS C:\Users\U\Desktop\workspace-d-installer> .\workspace-d-installer.exe
Welcome to the workspace-d installation guide.
Make sure, you have dmd, dub and git installed.
Which external components do you want to install?
[1] DCD - auto completion
[2] DScanner - code linting
[3] dfmt - code formatting
Enter a comma separated list of numbers
Selected [all]:
Cloning workspace-d into C:\Users\U\AppData\Local\Temp\workspaced-install-635958600835730563
Checking out v2.6.0
Compiling...
Error: Error writing file '..\..\..\..\..\..\U\AppData\Roaming\dub\packages\painlesstraits-0.1.0\.dub\build\library-release-windows-x86-dmd_2071-92537C3AEFB87AC450BFCCEE2ECBED44\painlesstraits.lib'
dmd failed with exit code 1.
Error while compiling workspace-d.
This is a bug with workspace-d-installer. Even though it just runs the shell commands, it has some permission problems on windows. I have opened an issue on the project page if you want to do anything on it: https://github.com/Pure-D/workspace-d-installer/issues/2
The only solution right now is to manually clone each repository (workspace-d, dfmt, dscanner, dcd) and follow their build instructions. I'm trying to fix that issue so you can use workspace-d-installer.
When I'm compiling ism project to create MSI, its still creates the MSI even though I have build errors.
The reason I need it NOT to be created is for build verification.
Instead of checking the build log for errors, I will just check the existence of the MSI.
Does anybody know how can I achieve that?
EDIT:
I'm using ISCmdBld tool to build MSIs. This is the command line I'm running to build where the environment variables are being set before running this command:
IsCmdBld -p "%FULL_PROJECT_FILENAME%" -a %BUILDMODE% -r %PRODUCT% -o "%MMSEARCHPATH%" | tee /A "%FULL_PROJECT_LOG_FILENAME%"
If you are compiling using IsCmdBld.exe, you should add the -x option, so that the build is stopped if an error occurs.
You also can use it combined with -w, which makes each warning becomes considered as an error (and thus, each warning encountered also stops the build).
More information about IsCmdBld.exe : http://helpnet.installshield.com/installshield16helplib/ISCmdBldParam.htm
I hope this helps.
Your build automation should check the exit code from ISCmdBld.exe. If the exit code is a failure, don't archive the output.
I'm using the xcode-plugin on Jenkins to run my unit tests and generate a result output in my iOS application. Although my build completes normally, when it gets to the point of executing the test portion it fails with the following error:
Going to invoke xcodebuild:target: FunTests, sdk: /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator5.0.sdk/, project: DEFAULT, configuration: Debug, clean: NO, archive:NO, symRoot: DEFAULT, configurationBuildDir: DEFAULT, codeSignIdentity: DEFAULT
[workspace] $ /usr/bin/xcodebuild -target FunTests -sdk /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator5.0.sdk/ -configuration Debug build
xcodebuild: error: SDK "/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator5.0.sdk/" cannot be located.
Build step 'Xcode' marked build as failure
Archiving artifacts
Finished: FAILURE
Here's a screen capture of my settings:
I've entered the correct path to the SDK, but no dice. I'm guessing this is something simple I've overlooked. Can anyone help, or even recommend an alternative way to accomplish this? I'm using Xcode 5, Jenkins v1.565, and xcode-plugin v1.4.2. Thanks in advance!
maybe the SDK name is wrong try xcodebuild -showsdks and use the name that is shown in there