GLFW + Vulkan on OSX - c++

I am setting up GLFW and Vulkan for a project of mine. For Vulkan I am using MoltenVk to get Vulkan compat and GLFW for the window creation. The IDE I am using is CLion, which uses the CMake system.
Judging from some github issues, there seems to be support for this setup, but nobody there mentions how it is done.
GLFW is installed through homebrew and MoltenVK manually by adding the MoltenVK and vulkan folders to usr/local/include and the contents of the MacOS folder to usr/local/lib (even though I am quite sure MoltenVK.framework should not be there).
At this point, Clion can see the GLFW and Vulkan headers, but I still need to link them up properly.
the full CMakeLists.txt file is this now:
cmake_minimum_required(VERSION 3.8)
project(VulkanEngine)
#set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} “${CMAKE_SOURCE_DIR}/cmake/Modules”)
set(CMAKE_CXX_STANDARD 17)
set(SOURCE_FILES src/main.cpp)
add_executable(VulkanEngine ${SOURCE_FILES})
#Finding and linking GLFW3
find_package(glfw3 3.2 REQUIRED)
if (glfw3_FOUND)
include_directories(${glfw3_INCLUDE_DIRS})
target_link_libraries (VulkanEngine ${glfw3_LIBRARIES})
endif (glfw3_FOUND)
#Finding and linking Vulkan
find_package (Vulkan)
if (Vulkan_FOUND)
include_directories(${Vulkan_INCLUDE_DIRS})
target_link_libraries (VulkanEngine ${Vulkan_LIBRARIES})
endif (Vulkan_FOUND)
the console tells the following when the cmake project has been reloading:
-- Could NOT find Vulkan (missing: Vulkan_LIBRARY)
-- Configuring done
-- Generating done
-- Build files have been written to: /Users/mtesseract/dev/cpp/VulkanEngine/cmake-build-debug
to me this indicates that GLFW has been found and linked, but when I try to build the "hello world" for GLFW, I get the following message:
Undefined symbols for architecture x86_64:
"_glfwInit", referenced from:
_main in main.cpp.o
I got FindVulkan.cmake from the GLFW github page https://git.io/v5ggN, since it has support for MoltenVK, but I am not sure if it is picked up by CMake at all. (I put the file in (projectroot)/cmake/modules/)
At this point, I am out of ideas as to why things are not linking properly, so help is appreciated.

I have found a solution that at least till some degree seems to work. At this point I have another problem to take care of (GLFW doesn't seem to pick up on MoltenVK's presence).
The process thus far is as follows (and can be found on my github page (github.com/mtesseracttech/VulkanEngine):
Vulkan + GLFW + GLM Setup Process with CMake and Package Managers
Windows:
Preparation:
Create CLion Application Project
Install MSYS2 (Cygwin-like package manager that includes a windows port of Arch's PacMan)
Install LunarG VK SDK
Download FindVulkan.cmake from GFLW's Github (it includes a path for MoltenVK(for OSX Later)) and put it in (proj_root/cmake/modules)
MSYS2 Commands:
$ pacman -Su //Updates pacman
$ pacman -Ss {packageName} //Is used for searching for exact package names
Installed Packages through msys2:
$ pacman -S mingw-w64-x86_64-toolchain //Installs the CLion toolchain that includes CMake, Make, GCC, etc.
$ pacman -S mingw-w64-x86_64-glfw //Installs GLFW
$ pacman -S mingw-w64-x86_64-glm //Installs GLM
$ pacman -S mingw-w64-x86_64-vulkan //Vulkan can also be installed through this method, but I went with LunarG
Enter the following in the CMakeLists.txt file in the root of the project:
######################################################################################
cmake_minimum_required(VERSION 3.8)
project(VulkanEngine)
set(CMAKE_CXX_STANDARD 17)
set(SOURCE_FILES src/main.cpp)
add_executable(VulkanEngine ${SOURCE_FILES})
#Setting up PkgConfig
find_package(PkgConfig REQUIRED)
#Finding and linking GLFW3
pkg_search_module(GLFW3 3.2 REQUIRED glfw3)
if(GLFW3_FOUND)
message(STATUS "Found GLFW, Including and Linking now")
include_directories(${GLFW3_INCLUDE_DIRS})
target_link_libraries(VulkanEngine ${GLFW3_STATIC_LIBRARIES})
endif(GLFW3_FOUND)
set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${CMAKE_SOURCE_DIR}/cmake/modules/")
#Finding and linking Vulkan
find_package (Vulkan)
if (VULKAN_FOUND)
message(STATUS "Found Vulkan, Including and Linking now")
include_directories(${VULKAN_INCLUDE_DIR})
target_link_libraries (VulkanEngine ${VULKAN_LIBRARY})
endif (VULKAN_FOUND)
######################################################################################
OSX:
Preparation
Create CLion Application Project
Install HomeBrew (package manager)
Download MoltenVK
Download FindVulkan.cmake from GFLW's Github (it includes a path for MoltenVK(for OSX Later)) and put it in (proj_root/cmake/modules)
Homebrew:
brew update //Updates homebrew
brew install glfw //Installs GLFW
brew install glm //Installs GLM
MoltenVK:
Place MoltenVK/macOS's contents into /usr/local/lib
Place MoltenVK/macOS/MoltenVK.framework/headers's contents into /usr/local/inc/MoltenVK
CMake:
Same as on windows, but in the FindVulkan.cmake file, add at the very end of the elseif(APPLE) block the line:
set(VULKAN_INCLUDE_DIR "/usr/local/include/MoltenVK")
This is not a pretty or flexible solution, but for now it will do.
I am pretty sure this solution is not ideal since GLFW isn't picking up on MoltenVK with this tactic, but at least things compile, so I see that as progress.

Seems your issue is that you haven’t defined the VULKAN_SDK variable. Make sure you point this to the parent folder of /lib & /include inside the SDK and FindVulkan should work
VULKAN_SDK=/opt/vulkan/x86_64 cmake.

Related

Unable to install boost from Cygwin in Windows 10

I'm pretty sure I'm doing something stupid here but when I try to go install boost from Cygwin's installer, I only see the -debug and -build options.
Cygwin Screenshot
I'm using the http://mirrors.sonic.net mirror. I switch to this from the default mirror because I thought that might have been the problem.
I know the package isn't getting installed because when I try to load my CMAKE file in clion, it throws and an error saying "Could NOT find Boost (missing: Boost_INCLUDE_DIR graph)".
Heres my CMakeLists.txt code:
cmake_minimum_required(VERSION 3.15)
project(HW_9)
set(CMAKE_CXX_STANDARD 14)
add_executable(HW_9 main.cpp knuth.txt graph_1.h)
# see https://cmake.org/cmake/help/latest/module/FindBoost.html
find_package(Boost REQUIRED COMPONENTS graph)
include_directories(${Boost_INCLUDE_DIR})
# Note: a target should be already defined using 'add_executable' or 'add_library'
target_link_libraries(HW_9 ${Boost_LIBRARIES})

what is the proper way of configuring visual studio code to use sdl2 over mingw32 and cmake [duplicate]

I'm trying to use CLion to create a SDL2 project.
The problem is that the SDL headers can't be found when using #include's.
My CMakeLists.txt file:
cmake_minimum_required(VERSION 2.8.4)
project(ChickenShooter)
set(SDL2_INCLUDE_DIR C:/SDL/SDL2-2.0.3/include)
set(SDL2_LIBRARY C:/SDL/SDL2-2.0.3/lib/x64)
include_directories(${SDL2_INCLUDE_DIR})
set(SOURCE_FILES main.cpp)
add_executable(ChickenShooter ${SOURCE_FILES})
target_link_libraries(ChickenShooter ${SDL2_LIBRARY})
My test main.cpp:
#include <iostream>
#include "SDL.h" /* This one can't be found */
int main(){
if (SDL_Init(SDL_INIT_VIDEO) != 0){
std::cout << "SDL_Init Error: " << SDL_GetError() << std::endl;
return 1;
}
SDL_Quit();
return 0;
}
Thank you for any help you could give me.
Edit:
I'm using Windows and CLion is configured to use cygwin64.
This blog post shows how you can do it: Using SDL2 with CMake
On Linux you can use a recent CMake (e.g. version 3.7) and using SDL2 works out of the box.
cmake_minimum_required(VERSION 3.7)
project(SDL2Test)
find_package(SDL2 REQUIRED)
include_directories(SDL2Test ${SDL2_INCLUDE_DIRS})
add_executable(SDL2Test Main.cpp)
target_link_libraries(SDL2Test ${SDL2_LIBRARIES})
Under Windows you can download the SDL2 development package, extract it somewhere and then create a sdl-config.cmake file in the extracted location with the following content:
set(SDL2_INCLUDE_DIRS "${CMAKE_CURRENT_LIST_DIR}/include")
# Support both 32 and 64 bit builds
if (${CMAKE_SIZEOF_VOID_P} MATCHES 8)
set(SDL2_LIBRARIES "${CMAKE_CURRENT_LIST_DIR}/lib/x64/SDL2.lib;${CMAKE_CURRENT_LIST_DIR}/lib/x64/SDL2main.lib")
else ()
set(SDL2_LIBRARIES "${CMAKE_CURRENT_LIST_DIR}/lib/x86/SDL2.lib;${CMAKE_CURRENT_LIST_DIR}/lib/x86/SDL2main.lib")
endif ()
string(STRIP "${SDL2_LIBRARIES}" SDL2_LIBRARIES)
When you now configure inside the CMake-GUI application there will be a SDL2_DIR variable. You have to point it to the SDL2 directory where you extracted the dev package and reconfigure then everything should work.
You can then include SDL2 headers by just writing #include "SDL.h".
Don't set the path to SDL2 by hand. Use the proper find command which uses FindSDL. Should look like:
find_file(SDL2_INCLUDE_DIR NAME SDL.h HINTS SDL2)
find_library(SDL2_LIBRARY NAME SDL2)
add_executable(ChickenShooter main.cpp)
target_include_directories(ChickenShooter ${SDL2_INCLUDE_DIR})
target_link_libraries(ChickenShooter ${SDL2_LIBRARY})
If SDL2 is not found, you have to add the path to SDL2 to CMAKE_PREFIX_PATH, that's the place where CMake looks for installed software.
If you can use Pkg-config, its use might be easier, see How to use SDL2 and SDL_image with cmake
If you feel more comfortable to use a FindSDL2.cmake file similar to FindSDL.cmake provided by CMake, see https://brendanwhitfield.wordpress.com/2015/02/26/using-cmake-with-sdl2/
You can also pull in the SDL source repository as a submodule and build/link it statically along with your main program via add_subdirectory() and target_link_libraries():
cmake_minimum_required( VERSION 3.18.0 )
project( sdl2-demo )
set( SDL_STATIC ON CACHE BOOL "" FORCE )
set( SDL_SHARED OFF CACHE BOOL "" FORCE )
# 'external/sdl' should point at a SDL
# repo clone or extracted release tarball
add_subdirectory( external/sdl )
add_executable(
${CMAKE_PROJECT_NAME}
"src/main.cpp"
)
target_link_libraries( ${CMAKE_PROJECT_NAME} SDL2main SDL2-static )
(At least as of the release-2.0.9 tag, possibly earlier.)
I recently discovered the latest version of SDL2 (version 2.0.12) now comes with all the required CMake config/install scripts, so there's no need to use FindSDL anymore.
I downloaded the SDL source from https://www.libsdl.org/download-2.0.php then from the root folder ran...
cmake -S . -B build/debug -G Ninja -DCMAKE_INSTALL_PREFIX=./install -DCMAKE_BUILD_TYPE=Debug
cmake --build build/debug --target install
This will build and install the debug version of the library, you can then also run...
cmake -S . -B build/release -G Ninja -DCMAKE_INSTALL_PREFIX=./install -DCMAKE_BUILD_TYPE=Release
cmake --build build/release --target install
Which will build and install the release version of the library (and because the SDL CMake script uses DEBUG_POSTFIX the release version of the library won't overwrite the debug one as the debug versions all have 'd' appended to their name).
In your CMakeLists.txt file you can then simply do this:
find_package(SDL2 REQUIRED)
add_executable(${PROJECT_NAME} ...)
target_link_libraries(
${PROJECT_NAME} PRIVATE
SDL2::SDL2
SDL2::SDL2main
You'll need to tell your application where to find the SDL install folder if you used a custom location as I've done in the example. To do this from the root folder of your app run:
cmake -S . -B build/debug -G Ninja -DCMAKE_BUILD_TYPE=Debug -DCMAKE_PREFIX_PATH=</absolute/path/to/install/dir>
cmake --build build/debug
Note: You can use $(pwd) (*nix/macOS) or %cd% (Windows) to create a hybrid relative path which can be very useful.
You can omit both DCMAKE_INSTALL_PREFIX and DCMAKE_PREFIX_PATH if you want to install SDL to the default system location.
In the examples I've opted to use the Ninja generator as it is consistent across macOS/Windows - it can be used with MSVC/Visual Studio, just make sure you run this (path may differ slightly depending on year/version) to add Ninja to your path.
C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\VC\Auxiliary\Build\vcvars64.bat
Update:
One other thing I remembered which is useful on Windows is the ability to copy the SDL .dll file into the application binary directory, this can be achieved like so:
if (WIN32)
# copy the .dll file to the same folder as the executable
add_custom_command(
TARGET ${PROJECT_NAME} POST_BUILD
COMMAND ${CMAKE_COMMAND} -E copy_if_different
$<TARGET_FILE:SDL2::SDL2>
$<TARGET_FILE_DIR:${PROJECT_NAME}>
VERBATIM)
endif()
Using the SDL2 CMake module that I developed, you can integrate the SDL2 library easily in a modern and portable approach.
You should just copy the module in cmake/sdl2 (Or just clone the modules repo) in your project:
git clone https://github.com/aminosbh/sdl2-cmake-modules cmake/sdl2
Then add the following lines in your CMakeLists.txt:
list(APPEND CMAKE_MODULE_PATH ${CMAKE_CURRENT_SOURCE_DIR}/cmake/sdl2)
find_package(SDL2 REQUIRED)
target_link_libraries(${PROJECT_NAME} SDL2::Main)
Note: If CMake didn't find the SDL2 library (in Windows), we can specify the CMake option SDL2_PATH as follows:
cmake .. -DSDL2_PATH="/path/to/sdl2"
For more details, please read the README.md file.
The SDL2 CMake modules support other related libraries : SDL2_image, SDL2_ttf, SDL2_mixer, SDL2_net and SDL2_gfx.
You can find a list of examples/samples and projects that uses these modules here : https://github.com/aminosbh/sdl-samples-and-projects
With the compiled version of SDL2-2.0.9 with MinGW-w64 in Windows, the following configuration works for me:
find_package(SDL2 REQUIRED)
add_executable(sdl-test ${SOURCES})
target_link_libraries(sdl-test
mingw32
SDL2::SDL2main
SDL2::SDL2
)
A longer explanation
By reading SDL2Targets.cmake file, I've learned that SDL2 is providing several targets:
SDL2::SDL2main (lib/libSDL2main.a)
SDL2::SDL2 (lib/libSDL2.dll.a)
SDL2::SDL2-static (lib/libSDL2-static.a)
Each of them has INTERFACE_INCLUDE_DIRECTORIES defined, which means we don't need to manually specify include_directories for SDL2.
But by only adding SDL2::SDL2main and SDL2::SDL2 as target_link_libraries is not enough. The g++ compiler might be complaining about "undefined reference to `WinMain'".
By inspecting the compiler options, I found that the SDL2 libraries are added before -lmingw32 option. In order to make the -lmingw32 option comes before SDL2 libraries, we have to also specify mingw32 as the first target_link_libraries. Which will make this configuration working.
The command that I have used for building it is:
$ mkdir build && cd build && cmake .. -G"MinGW Makefiles" && cmake --build .
The only small problem here is in the finally generated compiler options, the -lmingw32 option is duplicated. But since it doesn't affect the linking process, I've ignored it for now.
On Linux, in Clion, this works:
cmake_minimum_required(VERSION 3.20)
project(first_game)
set(CMAKE_CXX_STANDARD 14)
find_package(SDL2 REQUIRED)
include_directories(${SDL2_INCLUDE_DIRS})
add_executable(${PROJECT_NAME} main.cpp)
target_link_libraries(${PROJECT_NAME} ${SDL2_LIBRARIES})
You don't seems to have a CMake error whike generating your make file. But I think your problem is, the SDL Header are located in a subfolder named "SDL2".
Change your CMakeLists.txt to include
C:/SDL/SDL2-2.0.3/include/SDL2
Instead of
C:/SDL/SDL2-2.0.3/include
I had the same problem and none of the other solutions worked.
But I finally got it working by following this solution : How to properly link libraries with cmake?
In a nutshell, the problem was that the SDL2 library was not linked properly in my CMakeLists.txt. And by writing this into the file, it worked (more explainations in the other thread) :
project (MyProgramExecBlaBla) #not sure whether this should be the same name of the executable, but I always see that "convention"
cmake_minimum_required(VERSION 2.8)
ADD_LIBRARY(LibsModule
file1.cpp
file2.cpp
)
target_link_libraries(LibsModule -lpthread)
target_link_libraries(LibsModule liblapack.a)
target_link_libraries(LibsModule -L/home/user/libs/somelibpath/)
ADD_EXECUTABLE(MyProgramExecBlaBla main.cpp)
target_link_libraries(MyProgramExecBlaBla LibsModule)
Highlighting the steps of how I was able to eventually accomplish this using the FindSDL2.cmake module:
Download SDL2-devel-2.0.9-VC.zip (or whatever version is out after this answer is posted) under the Development Libraries section of the downloads page.
Extract the zip folder and you should see a folder similar to "SDL2-2.0.9". Paste this folder in your C:\Program Files(x86)\ directory.
Copy the FindSDL2.cmake module and place it in a new "cmake" directory within your project. I found a FindSDL2.cmake file in the answer referenced in the Accepted Answer: https://brendanwhitfield.wordpress.com/2015/02/26/using-cmake-with-sdl2/
Find the SET(SDL2_SEARCH_PATHS line in the FindSDL2.cmake and add your copied development directory for SDL2 as a new line: "/Program Files (x86)/SDL2-2.0.9" # Windows
Within my CMakeLists.txt, add this line: set(CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/cmake)
After this, running CMake worked for me. I'm including the rest of my CMakeLists just in case it further clarifies anything I may have left out:
cmake_minimum_required(VERSION 2.8.4)
project(Test_Project)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
# includes cmake/FindSDL2.cmake
set(CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/cmake)
set(SOURCE_FILES src/main.cpp src/test.cpp)
add_executable(test ${SOURCE_FILES})
# The two lines below have been removed to run on my Windows machine
#INCLUDE(FindPkgConfig)
#PKG_SEARCH_MODULE(SDL2 REQUIRED sdl2)
find_package(SDL2 REQUIRED)
INCLUDE_DIRECTORIES(${SDL2_INCLUDE_DIR})
TARGET_LINK_LIBRARIES(chip8 ${SDL2_LIBRARY})
Hope this helps somebody in the near future.
by the time of my answer, SDL2 is provided with sdl2-config executable (as I understand, developers call him "experimental").
After "make install" of SDL2 you can try calling it from terminal with
sdl2-config --cflags --libs to see what it outputs.
And then you can add call to it in your makefile:
set(PROJECT_NAME SomeProject)
project(${PROJECT_NAME})
execute_process(COMMAND /usr/local/bin/sdl2-config --libs RESULT_VARIABLE CMD_RES OUTPUT_VARIABLE SDL2_CFLAGS_LIBS ERROR_VARIABLE ERR_VAR OUTPUT_STRIP_TRAILING_WHITESPACE)
message("SDL2_CFLAGS_LIBS=${SDL2_CFLAGS_LIBS}; CMD_RES=${CMD_RES}; ERR_VAR=${ERR_VAR}")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11 ${SDL2_CFLAGS_LIBS}")
set(SOURCE_FILES main.cpp)
add_executable(${PROJECT_NAME} ${SOURCE_FILES})
Here I have a problem - if I only put an executable name without path like
execute_process(COMMAND sdl2-config --libs <...>
I get error "No such file", i.e. cmake does not search in current path and I don't know how to write it properly by now.
One more notice: in my makefile I do not user --cflags option, because cmake finds includes correctly and I do not need to specify them explicitly.
For your information, I was able to successfully cmake and compile SDL2_ttf while linking to SDL2 source code.
At first I was getting errors due to cmake not being able to locate SDL2, even though it was specified in cmake using the SLD2_DIR variable in cmake.
It seems that for some reason cmaking SDL2 fails to create the SDL2Targets.cmake file which is searched for by SDL2_ttf
If this is the case for you, get the SDL2Targets.cmake file from https://bugs.archlinux.org/task/57972 and modify the file like so:
You can remove the following lines:
get_filename_component(_IMPORT_PREFIX "${CMAKE_CURRENT_LIST_FILE}" PATH)
get_filename_component(_IMPORT_PREFIX "${_IMPORT_PREFIX}" PATH)
get_filename_component(_IMPORT_PREFIX "${_IMPORT_PREFIX}" PATH)
get_filename_component(_IMPORT_PREFIX "${_IMPORT_PREFIX}" PATH)
if(_IMPORT_PREFIX STREQUAL "/")
set(_IMPORT_PREFIX "")
endif()
and add this one:
set(_IMPORT_PREFIX "C:/SDL2-2.0.12")
Obviously change the filepath to the place you unpacked the SDL2 source code
I'm not sure if this is exactly your issue, but there it is.

Could NOT find FLTK (missing: FLTK_INCLUDE_DIR)

I'm trying to use fltk library in my project but I have some troubles.
Here is my CMakeLists.txt file:
cmake_minimum_required(VERSION 3.12)
project(pp)
set(CMAKE_CXX_STANDARD 14)
add_executable(pp main.cpp)
FIND_PACKAGE(FLTK REQUIRED)
FIND_PACKAGE(GTK REQUIRED)
TARGET_LINK_LIBRARIES(pp ${FLTK_LIBRARIES})
TARGET_LINK_LIBRARIES(pp ${GTK_LIBRARIES})
FLTK version: 1.3.4
Cmake version: 3.7.2
I have installed fltk library in my /usr/local dirs
Include files are located in /usr/local/include/FL
I saw that the FindFLTK.cmake looks for following files:
FL/Fl.h or FL/Fl.H which the FL/Fl.h is located in /usr/local/include/FL so it can be found.
Here is the error message:
Could NOT find FLTK (missing: FLTK_INCLUDE_DIR)
Have you any ideas to solve this problem?
UPDATE
Current version of CMakeLists.txt
cmake_minimum_required(VERSION 3.7.2)
project(pp)
set(CMAKE_CXX_STANDARD 14)
add_executable(pp main.cpp)
target_include_directories(pp PRIVATE /usr/local/include/FL)
set (LIBRARIES fltk Xrender Xcursor Xfixes Xext Xft fontconfig Xinerama pthread dl m X11)
message(STATUS mess: ${CMAKE_MODULE_PATH})
target_link_libraries(pp ${LIBRARIES})'
In this configuration I can compile, and link executable, but why configuration with FIND_PACKAGE does not work? Where I should look for a bug?
Probably bad installation of library. I just installed fresh one from GitHub sources with CMake configuring by cmake -G "MinGW Makefiles" . with followed make and make install to install it in compiler library I suppose.
After that errors containing Could NOT find FLTK (missing: FLTK_INCLUDE_DIR) has disappeared in compilation of another project. I suppose, cmake error report is not so strict and clarified, i.e. this error means some exception in FindFLTK.cmake and not exactly about missing FLTK_INCLUDE_DIR.

Clion with CMake can not see header files of OpenGL on MacOS [duplicate]

How can you link GLEW to a project with CMake?
We've been trying to link GLEW to our project using CMake for at least 3 hours without any success so any help is accepted.
I'm using the FindGLEW.cmake which comes with CMake 3.1.0
CMakeLists.txt
find_package(GLEW REQUIRED)
if (GLEW_FOUND)
include_directories($(GLEW_INCLUDE_DIRS))
endif()
Environment Variables
I'm using MinGW w64 to compile the sources and we successfully linked GLFW and GLM just by copying the includes and libs to their respective folders, but after doing the same with GLEW, CMake still couldn't find it.
Sorry if I wasn't clear enough while formulating the question. I will provide any additional information required.
Edit: I've managed to link the header files by specifying their location in the CMake Cache file, though I'm getting undefined reference to glew functions like glewInit().
Typical CMake scripts like FindGLEW will define variables that specify the paths and files that your project needs. If the script can't automatically identify the correct paths (usually because of nonstandard install location, which is fine), then it leaves these variables up to you to fill in.
With command line CMake, you use the -D flag to define and set the value of a given variable. Other CMake interfaces, like CMake-gui or an IDE integration, give you this ability some other way.
However you do it, you can also modify the cache directly (CMakeCache.txt) and see what CMake is using in there or just clear the cache altogether. You'll have to rerun CMake for it to pick up your changes.
When it comes to linking, that's when you need to tell CMake which libs to link. Use the link_libraries command with what the automated script gives you.
find_package(GLEW REQUIRED)
include_directories(${GLEW_INCLUDE_DIRS})
link_libraries(${GLEW_LIBRARIES})
Other answers do obviously work, but the target based style of cmake makes it even easier since the GLEW find module defines the imported target GLEW::GLEW. All you need is:
find_package(GLEW REQUIRED)
target_link_libraries(YourTarget GLEW::GLEW)
YourTarget is the target that you created with add_executable or add_library. No need to explicitly add include directories, they are added automatically by linking the targets.
The secret of find_package(GLEW) is in FindGLEW.cmake file with cmake install.
find_path(GLEW_INCLUDE_DIR GL/glew.h)
find_library(GLEW_LIBRARY NAMES GLEW glew32 glew glew32s PATH_SUFFIXES lib64)
The find_path and find_library commands find paths in standard system paths. If you want them to find paths in user defined directories, you should tell them.
For example:
set(CMAKE_PREFIX_PATH "d:/libs/glew-1.10.0")
set(CMAKE_LIBRARY_PATH "d:/libs/glew-1.10.0/lib/Release/Win32/")
find_package(GLEW REQUIRED)
Reference:
http://www.cmake.org/cmake/help/v3.0/command/find_path.html
http://www.cmake.org/cmake/help/v3.0/command/find_library.html
I was struggling hard to link glew to cmake through command line on mac. This might be helpful but I am not sure :) I will walk you through step by step of what I have done.
I installed Cmake source from the web.
Then I went inside the cmake folder in terminal and typed
./bootstrap && make && make install
(this will install cmake command line tools on our OS platform)
I have some exercise files. I want cmake to generate xcode files for me for all those exercise files (ex. triangles.cpp, shader.cpp etc) So i made a directory inside exercise files folder.
$ mkdir xcode
$ cd xcode
$ cmake -G "Xcode" ..
At this point, Cmake suppose to install all xcode files that included correct libraries. But there was an error :
$ cmake -G "Xcode" ..
CMake Warning (dev) at CMakeLists.txt:3 (cmake_minimum_required):
Compatibility with CMake < 2.4 is not supported by CMake >= 3.0.
This warning is for project developers. Use -Wno-dev to suppress it.
system name is: Darwin-14.1.0
system processor is: x86_64
-- Could NOT find GLEW (missing: GLEW_INCLUDE_DIR GLEW_LIBRARY)
-- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE)
-- Using Cocoa for window creation
-- Using NSGL for context creation
-- Building GLFW only for the native architecture
CMake Error: The following variables are used in this project, but they are set to NOTFOUND.
Please set them or make sure they are set and tested correctly in the CMake files:
GLEW_LIBRARY
linked by target "TextureLoader" in directory /Users/Mydir/Desktop/Exercise/Exercise Files
-- Configuring incomplete, errors occurred!
Then to make sure I have installed GLEW and all its libraries correctly, I ran
$brew install glew
Yes, I have installed glew already but it was NOT linked. See the Warning below:
Warning: glew-1.12.0 already installed, it's just not linked
Then I ran the following commands:
$ brew unlink glew
$ brew link glew
And I have solved the error. So just make sure that you have linked glew. Hope this helps.
Happy Coding :)
Finally I found a simple and short CMakeLists which works if you have installed everything in default paths.(openGL, glfw and glew)
cmake_minimum_required(VERSION 3.3)
project(openGL_tutorial)
find_package(OpenGL REQUIRED)
if(NOT OPENGL_FOUND)
message("ERROR: OpenGL not found")
endif(NOT OPENGL_FOUND)
set(GL_LIBRARY GL GLU X11)
add_executable(openGL_tutorial main.cpp)
target_link_libraries(openGL_tutorial glfw GLEW libGLEW.so libGLU.so libGL.so)
For what it is worth, in 2023, this works for me, on macOS, with GLEW, GLFW, and CMake installed using Homebrew:
cmake_minimum_required(VERSION 3.10)
project(Project)
add_executable(Project main.cpp)
find_package(glfw3 REQUIRED)
find_package(GLEW REQUIRED)
target_link_libraries(Project glfw GLEW::glew)

FreeType2 Cross-compiling for Android

I was able to compile Freetype2 library for arm, arm64, x86, x86_64 architectures. These are steps I done to compile it.
Created standalone toolchains for architectures mentioned above.
make_standalone_toolchain.py \
--arch arm64 \
--api 26 \
--stl=libc++ \
--install-dir=my-arm64-toolchain
Set some envirement variables
export PATH=$PATH:`pwd`/my-toolchain/bin
target_host=aarch64-linux-android
export AR=$target_host-ar
export AS=$target_host-as
export CC=$target_host-gcc
export CXX=$target_host-g++
export LD=$target_host-ld
export STRIP=$target_host-strip
export CFLAGS="-fPIE -fPIC"
export LDFLAGS="-pie"
Configure freetype for compilation
./configure --host=aarch64-linux-android --prefix=/home/freetype-arm64 --without-zlib --without-harfbuzz --with-png=no
And finally make && install
Compilation was successfull and I was able to get Static freetype library.
I added library to my android studio libs folder.
This is folder structure for library:
libs---freetype
|---${ANDROID_ABI}
|---include
|---freetype2
|---freetype
---|Bunch of header files
|---ftbuild.h
|---lib
|---libfreetype.a
This is my CMakeLists.txt:
cmake_minimum_required(VERSION 3.4.1)
add_definitions("-DGLM_FORCE_SIZE_T_LENGTH -DGLM_FORCE_RADIANS")
add_subdirectory(src/main/cpp/glm)
add_library(freetype STATIC IMPORTED)
set_target_properties(freetype PROPERTIES IMPORTED_LOCATION${PROJECT_SOURCE_DIR}/libs/freetype/${ANDROID_ABI}/lib/libfreetype.a)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11 -Wall")
add_library(native-lib SHARED
src/main/cpp/native-lib.cpp
src/main/cpp/graph.cpp
src/main/cpp/text.cpp
src/main/cpp/graphDataWorker.cpp
)
target_include_directories(native-lib PRIVATE ${PROJECT_SOURCE_DIR}/libs/freetype/${ANDROID_ABI}/include/freetype2)
target_link_libraries(native-lib
android
freetype
GLESv2
EGL
glm
atomic
log
OpenSLES
)
The problem is that I can use library inside my code and android studio is not giving me any errors, but then i try to run application it gives me this error:
linker command failed with exit code 1 (use -v to see invocation)
PS: I Can't see freetype headers in android studio file tree aswell, but can see other libraries.
Question: Am I importing library in a wrong way or this is cross-compilation issue and if so how to do it properly?
I done a lot of research on this issue and was unable to find a solution
Any help will be appreciated.
Unless you mixed paths when installing your build of FreeType2, it seems that the compilation of the library is incorrect, since the linker complains about the library being for x86_64 architecture.
On Linux, usually you can check the architecture the library is built for with command file. Another way to check the architecture is to use the objdump tool that is shipped with Android NDK (if I remember correctly it is generated with a toolchain as well). Its name follows the same pattern than the compiler/linker/... tools, $target_host-objdump.
I would recommend to compile FreeType2 using CMake instead of autotools, at least in my case I successfully did it that way.
Here is a sample of CMake configuration I wrote to cross-compile FreeType2 for Android. It is a little complex because it is part of a project where I build several libraries.
The idea is that my CMake configuration uses ExternalProject to download and compile Freetype. My top-level CMakeLists.txt contains:
# CMakeLists.txt
set(DEVENV_CMAKE_ARGS
-DCMAKE_INSTALL_PREFIX=${CMAKE_INSTALL_PREFIX}
-DCMAKE_BUILD_TYPE=${CMAKE_BUILD_TYPE}
-DBUILD_SHARED_LIBS=${BUILD_SHARED_LIBS}
-DCMAKE_C_FLAGS=${CMAKE_CXX_FLAGS}
-DCMAKE_C_FLAGS_${BUILD_TYPE}=${CMAKE_C_FLAGS_${BUILD_TYPE}}
-DCMAKE_CXX_FLAGS=${CMAKE_CXX_FLAGS}
-DCMAKE_CXX_FLAGS_${BUILD_TYPE}=${CMAKE_CXX_FLAGS_${BUILD_TYPE}}
-DCMAKE_CXX_STANDARD=${CMAKE_CXX_STANDARD}
-DCMAKE_CXX_EXTENSIONS=${CMAKE_CXX_EXTENSIONS}
)
if(BUILD_SHARED_LIBS)
list(APPEND DEVENV_CMAKE_ARGS -DBUILD_STATIC_LIBS=OFF -DLIBTYPE=SHARED)
else()
list(APPEND DEVENV_CMAKE_ARGS -DBUILD_STATIC_LIBS=ON -DLIBTYPE=STATIC)
endif()
if(DEFINED ANDROID_TOOLCHAIN_DIR)
get_filename_component(_toolchain_dir ${ANDROID_TOOLCHAIN_DIR} ABSOLUTE)
list(APPEND DEVENV_CMAKE_ARGS -DANDROID_TOOLCHAIN_DIR=${_toolchain_dir})
endif()
if(DEFINED CMAKE_ANDROID_ARCH_ABI)
list(APPEND DEVENV_CMAKE_ARGS -DCMAKE_ANDROID_ARCH_ABI=${CMAKE_ANDROID_ARCH_ABI})
endif()
if(CMAKE_TOOLCHAIN_FILE)
get_filename_component(_toolchain_file ${CMAKE_TOOLCHAIN_FILE} ABSOLUTE)
list(APPEND DEVENV_CMAKE_ARGS -DCMAKE_TOOLCHAIN_FILE=${_toolchain_file})
endif()
add_subdirectory(freetype)
So the variable DEVENV_CMAKE_ARGS contains appropriate CMake arguments for cross-compiling that reflect my current CMake configuration. Under directory freetype, the CMakeLists.txt contains:
# freetype/CMakeLists.txt
project(freetype)
include(ExternalProject)
if(NOT FREETYPE_GIT_REPOSITORY)
set(FREETYPE_GIT_REPOSITORY "https://git.savannah.gnu.org/git/freetype/freetype2.git")
endif()
set(FREETYPE_GIT_REPOSITORY "${FREETYPE_GIT_REPOSITORY}"
CACHE STRING "Git repository for library Freetype."
)
if(NOT FREETYPE_GIT_TAG)
set(FREETYPE_GIT_TAG "VER-2-9")
endif()
set(FREETYPE_GIT_TAG "${FREETYPE_GIT_TAG}"
CACHE STRING "Tag or branch of Git repository to build."
)
message(STATUS "Freetype Git repository: ${FREETYPE_GIT_REPOSITORY}")
message(STATUS "Freetype Git tag: ${FREETYPE_GIT_TAG}")
externalproject_add(freetype
GIT_REPOSITORY "${FREETYPE_GIT_REPOSITORY}"
GIT_TAG "${FREETYPE_GIT_TAG}"
SOURCE_DIR "${CMAKE_CURRENT_BINARY_DIR}/freetype/src"
BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}/freetype/build"
CMAKE_ARGS ${DEVENV_CMAKE_ARGS}
)
Basically this CMakeLists.txt uses ExternalProject to download and compile FreeType2 in the build directory.
And I use a toolchain file for Android:
# android.cmake
set(CMAKE_SYSTEM_NAME "Android")
set(CMAKE_ANDROID_STANDALONE_TOOLCHAIN ${ANDROID_TOOLCHAIN_DIR})
Sorry if it is overly complex; it comes from a project where I was playing with cross-compiling for Android. I hope it helps anyway.