I have a file that contains a bunch of ip addresses. I would like for my sed command to remove the first two octets of these.
ex. 172.0.0.1 should be changed to XXX.ZZZ.0.1
What I have now remove the lasts octets and replace it with an x!
sed -i 's/\(\([0-9]\{1,3\}\.\)\{3\}\)[0-9]\{1,3\}/\1XXX/g' "${file}"
This is run in a bash scripts that takes the file containing the ip addresses as input param.
I haven't been able to figure out how to do this with sed yet so I'll appreciate any help.
It seems you may use
sed -i.bak -E 's/\b([0-9]{1,3}\.){2}([0-9]{1,3}\.[0-9]{1,3})\b/XXX.ZZZ.\2/g' "${file}"
The -E (or -r on other OSes) enables the POSIX ERE syntax that allows using fewer escapes in the pattern (no need to escape grouping ( and ) symbols and the limiting/range quantifier {n,m}).
Details
\b - word boundary
([0-9]{1,3}\.){2} - two occurences of (Group 1) one to three digits and a dot
([0-9]{1,3}\.[0-9]{1,3}) - (Group 2) one to three digits, a . and again 1 to 3 digits
\b - word boundary
The whole match is replaced with Group 2 value (\2). The -i.bak will make the replacements in file, and an original copy with a .bak extension will be generated.
See the online demo.
Related
I need to modify an ntp configuration file by adding some options to the line containing Ip addresses.
I have been trying it for so long using sed command, but no able to modify the line unless i don't know the IP addresses.
Let say, i have few lines as,
server 172.0.0.1
server 10.0.0.1
I need to add iburst option after the ip address.
I have tried command like.. sed -e 's/(\d{1,3}\.\d{1.3}\.\d{1,3}\.\d{1,3})/ \1 iburst/g' ntp_file
or sed -e 's/^server +\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}/server \1\.\2\.\3\ iburst/g' ntp_file
but its not modifying the line. Any kind of suggestions would be really appriciated.
The regex you have used as POSIX BRE cannot match the expected strings due to \d shorthand class that sed does not support, the misused dot inside a range quantifier and incorrect escaping of grouping and range quantifier delimiters.
You may use
sed -E -i 's/[0-9]{1,3}(\.[0-9]{1,3}){3}/ & iburst/g' ntp_file
The POSIX ERE (enabled with the -E option) expression means to match
[0-9]{1,3} - one to three digits
(\.[0-9]{1,3}){3} - three occurrences of a dot and one to three digits
The replacement pattern is & iburst where & stands for the whole match.
The g flag replaces all occurrences.
I have a large binary file. I want to extract certain strings from it and copy them to a new text file.
For example, in:
D-wM-^?^#^#^#^#^#^#^#^Y^#^#^#^#^#^#^#M-lM-FM-MM-[o#^B^#M-lM-FM MM-[o#^B^#^#^#^#^#E7cacscKLrrok9bwC3Z64NTnZM-^G
I want to take the number '7' (after the #^#^#E) and every character after it stopping at the Z ('ignoring the M-^G).
I want to copy this 7cacscKLrrok9bwC3Z64NTnZ to a new file.
There will be multiple such strings in one file. The end will always be denoted by the M- (which I don't want copied). The start will always be denoted by a 7 (which I do want copied).
Unfortunately, my knowledge of grep, sed, etc, does not extend to this level. Can someone please suggest a viable way to achieve this?
cat -v filename | grep [7][A-Z,a-z] will show all strings with a '7' followed by a letter but that's not much.
Thank you.
I've noticed that my requirements are rather more complicated.
(I've performed the correct - I hope - formatting this time). Thanks to 'tshiono' for his (?) answer to the earlier submission.
I want to check the ending of a string and, if it ends in M-, grep another string that follows it (with junk in between). If the string does not end in M-, then I don't want it copied (let alone any other strings).
So what I would like is:
grep -a -Po "7[[:alnum:]]+(?=M-)" file_name and if the ending is M- then grep -a -Po "5x[[:alnum:]]+(?=\^)" file_name to copy the string that starts with 5x and ends with a ^.
In this example:
D-wM-^?^#^#^#^#^#^#^#^Y^#^#^#^#^#^#^#M-lM-FM-MM-[o#^B^#M-lM-FM MM-[o#^B^#^#^#^#^#E7cacscKLrrok9bwC3Z64NTnZM-^GwM-^?^#^#^#^#^#^#^#^Y^#^#^#^#^#^#^#M-lM-FM-MM-[o#^B^#M-lM5x8w09qewqlkcklwnlkewflewfiewjfoewnflwenfwlkfwelk^89038432nowefe
The outcome would be:
7cacscKLrrok9bwC3Z64NTnZ
5x8w09qewqlkcklwnlkewflewfiewjfoewnflwenfwlkfwelk
However, if the ending is not M- (more precisely, if the ending is ^S), then do not try the second grep and do not record anything at all.
In this example:
D-wM-^?^#^#^#^#^#^#^#^Y^#^#^#^#^#^#^#M-lM-FM-MM-[o#^B^#M-lM-FM MM-[o#^B^#^#^#^#^#E7cacscKLrrok9bwC3Z64NTnZ^SGwM-^?^#^#^#^#^#^#^#^Y^#^#^#^#^#^#^#M-lM-FM-MM-[o#^B^#M-lM5x8w09qewqlkcklwnlkewflewfiewjfoewnflwenfwlkfwelk^89038432nowefe
The outcome would be null (nothing copied) as the 7cacs... string ends in ^S.
Is grep the correct tool? Grep a file and if the condition in the grep command is 'yes' then issue a different grep command but if the condition is 'no' then do nothing.
Thanks again.
I have noticed one addition modification.
Can one add an OR command to the second part? Grep if the second string starts with 5x OR 6x?
In the example below, grep -aPo "7[[:alnum:]]+M-.*?5x[[:alnum:]]+\^" filename | grep -aPo "7[[:alnum:]]+(?=M-)|5x[[:alnum:]]+(?=\^)" will extract the strings starting with 7 and the strings starting with 5x.
How can one change the 5x to 5x or 6x?
D-wM-^?^#^#^#^#^#^#^#^Y^#^#^#^#^#^#^#M-lM-FM-MM-[o#^B^#M-lM-FM MM-[o#^B^#^#^#^#^#E7cacscKLrrok9bwC3Z64NTnZM-^GwM-^?^#^#^#^#^#^#^#^Y^#^#^#^#^#^#^#M-lM-FM-MM-[o#^B^#M-lM5x8w09qewqlkcklwnlkewflewfiewjfoewnflwenfwlkfwelk^89038432nowefe
D-wM-^?^#^#^#^#^#^#^#^Y^#^#^#^#^#^#^#M-lM-FM-MM-[o#^B^#M-lM-FM MM-[o#^B^#^#^#^#^#E7AAAAAscKLrrok9bwC3Z64NTnZM-^GwM-^?^#^#^#^#^#^#^#^Y^#^#^#^#^#^#^#M-lM-FM-MM-[o#^B^#M-lM6x8w09qewqlkcklwnlkewflewfiewjfoewnflwenfwlkfwelk^89038432nowefe
In this example, the desired outcome would be:
7cacscKLrrok9bwC3Z64NTnZ
5x8w09qewqlkcklwnlkewflewfiewjfoewnflwenfwlkfwelk
7AAAAAscKLrrok9bwC3Z64NTnZ
6x8w09qewqlkcklwnlkewflewfiewjfoewnflwenfwlkfwelk
UPDATE MARCH 09:
I need to create a series of complex grep (or perl) commands to extract strings from a series of binary files.
I need two strings from the binary file.
The first string will always start with a 1.
The first string will end with a letter or number. The next letter will always be a lower case k. I do not want this k character.
The difficulty is that the ending k will not always be the first k in the string. It might be the first k but it might not.
After the k, there is a second string. The second string will always start with an A or a B.
The ending of the second string will be in one of two forms:
a) it will end with a space then display the first three characters from the first string in lower case followed by a )
b) it will end with a ^K then display the first three characters from the first string in lower case.
For example:
1pppsx9YPar8Rvs75tJYWZq3eo8PgwbckB4m4zT7Yg042KIDYUE82e893hY ppp)
Should be:
1pppsx9YPar8Rvs75tJYWZq3eo8Pgwbc and B4m4zT7Yg042KIDYUE82e893hY - delete the k and the space then ppp.
For example:
1zzzsx9YPkr8Rvs75tJYWZq3eo8PgwbckA2m4zT7Yg042KIDYUE82e893hY^Kzzz
Should be:
1zzzsx9YPkar8Rvs75tJYWZq3eo8Pgwbc and A4m4zT7Yg042KIDYUE82e893hY - delete the second k and the ^Kzzz.
In the second example, we see that the first k is part of the first string. It is the k before the A that breaks up the first and second strings.
I hope there is a super grep expert who can help! Many thanks!
If your grep supports -P option, would you please try:
grep -a -Po "7[[:alnum:]]+(?=M-)" file
The -a option forces grep to read the input as a text file.
The -P option enables the perl-compatible regex.
The -o option tells grep to print only the matched substring(s).
The pattern (?=M-) is a zero-width lookahead assertion (introduced in
Perl) without including it in the result.
Alternatively you can also say with sed:
sed 's/M-/\n/g' file | sed -n 's/.*\(7[[:alnum:]]\+\).*/\1/p'
The first sed command splits the input file into miltiple lines by
replacing the substring M- with a newline.
It has two benefits: it breaks the lines to allow multiple matches with
sed and excludes the unnecessary portion M- from the input.
The next sed command extracts the desired pattern from the input.
It assumes your sed accepts \n in the replacement, which is
a GNU extension (not POSIX compliant). Otherwise please try (in case you are working on bash):
sed 's/M-/\'$'\n''/g' file | sed -n 's/.*\(7[[:alnum:]]\+\).*/\1/p'
[UPDATE]
(The requirement has been updated by the OP and the followings are solutions according to it.)
Let me assume the string which starts with 7 and ends with M- is always followed
by another (no more and no less than one) string which starts with 5x and ends
with ^ (ascii caret character) with junks in between.
Then would you please try the following:
grep -aPo "7[[:alnum:]]+M-.*?5x[[:alnum:]]+\^" file | grep -aPo "7[[:alnum:]]+(?=M-)|5x[[:alnum:]]+(?=\^)"
It executes the task in two steps (two cascaded greps).
The 1st grep narrows down the input data into the candidate substring
which will include the desired two sequences and junks in between.
The regex .*? in between matches any (ascii or binary) characters
except for a newline character.
The trailing ? enables the shortest match
which avoids the overrun due to the greedy nature of regex. The regex is intended to match junks in between.
The 2nd grep includes two regex's merged with a pipe | meaning logical OR.
Then it extracts two desired sequences.
A potential problem of grep solution is that grep is a line oriented command
and cannot include the newline character in the matched string.
If a newline character is included in the junks in between (I'm not sure about the possibility), the above solution will fail.
As a workaround, perl will provide flexible manipulations with binary data.
perl -0777 -ne '
while (/(7[[:alnum:]]+)M-.*?(5x[[:alnum:]]+)\^/sg) {
printf("%s\n%s\n", $1, $2);
}
' file
The regex is mostly same as that of grep because the -P option of grep means
perl-compatible.
It can capture multiple patterns at once in variables $1 and $2 hence just one regex is enough.
The -0777 option to the perl command tells perl to slurp all data
at once.
The s option at the end the regex makes a dot match a newline character.
The g option enables the global (multiple) match.
[UPDATE2]
In order to make the regex match either 5x or 6x, replace 5x with (5|6)x.
Namely:
grep -aPo "7[[:alnum:]]+M-.*?(5|6)x[[:alnum:]]+\^" file | grep -aPo "7[[:alnum:]]+(?=M-)|(5|6)x[[:alnum:]]+(?=\^)"
As mentioned before, the pipe | means OR. The OR operator has the lowest priority in the evaluation, hence you need to enclose them with parens in this case.
If there is a possibility any other number than 5 or 6 may appear, it will be safer to put [[:digit:]] instead, which matches any one digit betweeen 0 and 9:
grep -aPo "7[[:alnum:]]+M-.*?[[:digit:]]x[[:alnum:]]+\^" file | grep -aPo "7[[:alnum:]]+(?=M-)|[[:digit:]]x[[:alnum:]]+(?=\^)"
[UPDATE3]
(Answering the OP's requirement on March 9th)
Let me start with a perl code which regex will be relatively easier
to explain.
perl -0777 -ne 'while (/(1(.{3}).+)k([AB].*)[\013 ]\2/g){print "$1 $3\n"}' file
Output:
1pppsx9YPar8Rvs75tJYWZq3eo8Pgwbc B4m4zT7Yg042KIDYUE82e893hY
1zzzsx9YPkr8Rvs75tJYWZq3eo8Pgwbc A2m4zT7Yg042KIDYUE82e893hY
[Explanation of regex]
(1(.{3}).+)k([AB].*)[\013 ]\2
( start of the 1st capture group referred by $1 later
1 literal "1"
( start of the 2nd capture group referred by \2 later
.{3} a sequence of the identical three characters such as ppp or zzz
) end of the 2nd capture group
.+ followed by any characters with "greedy" match which may include the 1st "k"
) end of the 1st capture group
k literal "k"
( start of the 3rd capture group referred by $3 later
[AB].* the character "A" or "B" followed by any characters
) end of the 3rd capture group
[\013 ] followed by ^K or a whitespace
\2 followed by the capture group 2 previously assigned
When implementing it with grep, we will encounter a limitation of grep.
Although we want to extract multiple patterns from the input file,
the -e option (which can specify multiple search patterns) does not
work with -P option. Then we need to split the regex into two patterns
such as:
grep -Po "(1(.{3}).+)(?=k([AB].*)[\013 ]\2)" file
grep -Po "(1(.{3}).+)k\K([AB].*)(?=[\013 ]\2)" file
And the result will be:
1pppsx9YPar8Rvs75tJYWZq3eo8Pgwbc
1zzzsx9YPkr8Rvs75tJYWZq3eo8Pgwbc
B4m4zT7Yg042KIDYUE82e893hY
A2m4zT7Yg042KIDYUE82e893hY
Please be noted the order of output is not same as the order of appearance in the original file.
Another option will be to introduce ripgrep or rg which is a fast
and versatile version of grep. You may need to install ripgrep with
sudo apt install ripgrep or using other package handling tool.
An advantage of ripgrep is it supports -r (replace) option in which
you can make use of the backreferences:
rg -N -Po "(1(.{3}).+)k([AB].*)[\013 ]\2" -r '$1 $3' file
The -r '$1 $3' option prints the 1st and the 3rd capture groups and the result will be the same as perl.
In the general case, you can use the strings utility to pluck out ASCII from binary files; then of course you can try to grep that output for patterns that you find interesting.
Many traditional Unix utilities like grep have internal special markers which might get messed up by binary input. For example, the character \xFF was used for internal purposes by some versions of GNU grep so you can't grep for that character even if you can figure out a way to represent it in the shell (Bash supports $'\xff' for example).
A traditional approach would be to run hexdump or a similar utility, and then grep that for patterns. However, more modern scripting languages like Perl and Python make it easy to manipulate arbitrary binary data.
perl -ne 'print if m/\xff\xff/' </dev/urandom
This might work for you (GNU sed):
sed -En '/\n/!{s/M-\^G/\n/;s/7[^\n]*\n/\n&/};/^7[^\n]*/P;D' file
Split each line into zero or more lines that begin with 7 and end just before M-^G and only print such lines.
I have a test property file with this in it:
-config.test=false
config.test=false
I'm trying to, using sed, update the values of these properties whether they have the - in front of them or not. Originally I was using this, which worked:
sed -i -e "s/#*\(config.test\)\s*=\s*\(.*\)/\1=$(echo "true" | sed -e 's/[\/&]/\\&/g')/" $FILE_NAME
However, since I was basically ignoring all characters before the match, I found that when I had properties with keys that ended in the same value, it'd give me problems. Such as:
# The regex matches both of these
config.test=true
not.config.test=true
Is there a way to either ignore the first character for a match or ignore the initial - specifically?
EDIT:
Adding a little clarification in terms of what I'd want the regex to match:
config.test=false # Should match
-config.test=false # Should match
not.config.test=false # Should NOT match
sed -E 's/^(-?config\.test=).*/\1true/' file
? means zero or 1 repetitions of so it means the - can be present or not when matching the regexp.
I found some solution for a regex of a specific length instead of ignoring the first character with sed and awk. Sometimes the opposite does the same by an easier way.
If you only have the alternative to use sed I have two workaround depending on your file.
If your file looks like this
$ cat file
config.test=false
-config.test=false
not.config.test=false
you can use this one-liner
sed 's/^\(.\{11,12\}=\)\(.*$\)/\1true/' file
sed is looking at the beginning ^ of each line and is grouping \( ... \) for later back referencing every character . that occurs 11 or 12 times \{11,12\} followed by a =.
This first group will be replaced with the back reference \1.
The second group that match every character after the = to the end of line \(.*$\) will be dropped. Instead of the second group sed replaces with your desired string true.
This also means, that every character after the new string true will be chopped.
If you want to avoid this and your file looks like
$ cat file
config.test=true # Should match
-config.test=true # Should match
not.config.test=false # Should NOT match
you can use this one-liner
sed 's/^\(.\{11,12\}=\)\(false\)\(.*$\)/\1true\3/' file
This is like the example before but works with three groups for back referencing.
The content of the former group 2 is now in group 3. So no content after a change from false to true will be chopped.
The new second group \(false\) will be dropped and replaced by the string true.
If your file looks like in the example before and you are allowed to use awk, you can try this
awk -F'=' 'length($1)<=12 {sub(/false/,"true")};{print}'
For me this looks much more self-explanatory, but is up to your decision.
In both sed examples you invoke only one time the sed command which is always good.
The first sed command needs 39 and the second 50 character to type.
The awk command needs 52 character to type.
Please tell me if this works for you or if you need another solution.
I am looking for a way to delete all lines that do not follow a specific pattern (from a txt file).
Pattern which I need to keep the lines for:
x//x/x/x/5/x/
x could be any amount of characters, numbers or special characters.
5 is always a combination of alphanumeric - 5 characters - e.g Xf1Lh, always appears after the 5th forward slash.
/ are actual forward slashes.
Input:
abc//a/123/gds:/4AdFg/f3dsg34/
y35sdf//x/gd:df/j5je:/x/x/x
yh//x/x/x/5Fsaf/x/
45wuhrt//x/x/dsfhsdfs54uhb/
5ehys//srt/fd/ab/cde/fg/x/x
Desired output:
abc//a/123/gds:/4AdFg/f3dsg34/
yh//x/x/x/5Fsaf/x/
grep selects lines according to a regular expression and your x//x/x/x/5/x/ just needs minor changes to make it into a regular expression:
$ grep -E '.*//.*/.*/.*/[[:alnum:]]{5}/.*/' file
abc//a/123/gds:/4AdFg/f3dsg34/
yh//x/x/x/5Fsaf/x/
Explanation:
"x could be any amount of characters, numbers or special characters". In a regular expression that is .* where . means any character and * means zero or more of the preceding character (which in this case is .).
"5 is always a combination of alphanumeric - 5 characters". In POSIX regular expressions, [[:alnum:]] means any alphanumeric character. {5} means five of the preceding. [[:alnum:]] is unicode-safe.
Possible improvements
One issue is how x should be interpreted. In the above, x was allowed to be any character. As triplee points out, however, another reasonable interpretation is that x should be any character except /. In that case:
grep -E '[^/]*//[^/]*/[^/]*/[^/]*/[[:alnum:]]{5}/[^/]*/' file
Also, we might want this regex to match only complete lines. In that case, we can either surround the regex with ^ an $ or we can use grep's -x option:
grep -xE '[^/]*//[^/]*/[^/]*/[^/]*/[[:alnum:]]{5}/[^/]*/' file
I was figuring out how to do it in awk at the same time as the other answer and came up with:
awk -F/ 'BEGIN{OFS=FS}$2==""&&$6~/[a-zA-Z0-9][a-zA-Z0-9][a-zA-Z0-9][a-zA-Z0-9][a-zA-Z0-9]/&&NF=8'
The awk I worked it out on didn't support the {5} regexp frob.
You can use -P option for extended perl support like
grep -P "^(?:[^/]*/){5}[A-Za-z0-9]{5}/(?:/|$)" input
Output
abc//a/123/gds:/4AdFg/f3dsg34/
yh//x/x/x/5Fsaf/x/
Regex Breakdown
^ #Start of line
(?: #Non capturing group
[^/]* #Match anything except /
/ #Match / literally
){5} #Repeat this 5 times
[A-Za-z0-9]{5} #Match alphanumerics. You can use \w if you want to allow _ along with [A-Za-z0-9]
(?: #Non capturing group
/ #Next character should be /
| #OR
$ #End of line
)
Using sed and in place edit to delete all lines that do not follow a specific pattern (from a txt file):
$ sed -i.bak -n "/.*\/\/.*\/.*\/.*\/[a-zA-Z0-9]\{5\}\/.*\//p" test.in
$ cat test.in
abc//a/123/gds:/4AdFg/f3dsg34/
yh//x/x/x/5Fsaf/x/
-i.bak in place edit creating a test.in.bak backup file, -n quiet, do not print non-matches to output
and ".../p" print matches.
I have a file that looks like this:
#"Afghanistan.png",
#"Albania.png",
#"Algeria.png",
#"American_Samoa.png",
I want it to look like this
#"Afghanistan.png",
#"Afghanistan",
#"Albania.png",
#"Albania",
#"Algeria.png",
#"Algeria",
#"American_Samoa.png",
#"American_Samoa",
I thought I could use sed to do this but I can't figure out how to store something in a buffer and then modify it.
Am I even using the right tool?
Thanks
You don't have to get tricky with regular expressions and replacement strings: use sed's p command to print the line intact, then modify the line and let it print implicitly
sed 'p; s/\.png//'
Glenn jackman's response is OK, but it also doubles the rows which do not match the expression.
This one, instead, doubles only the rows which matched the expression:
sed -n 'p; s/\.png//p'
Here, -n stands for "print nothing unless explicitely printed", and the p in s/\.png//p forces the print if substitution was done, but does not force it otherwise
That is pretty easy to do with sed and you not even need to use the hold space (the sed auxiliary buffer). Given the input file below:
$ cat input
#"Afghanistan.png",
#"Albania.png",
#"Algeria.png",
#"American_Samoa.png",
you should use this command:
sed 's/#"\([^.]*\)\.png",/&\
#"\1",/' input
The result:
$ sed 's/#"\([^.]*\)\.png",/&\
#"\1",/' input
#"Afghanistan.png",
#"Afghanistan",
#"Albania.png",
#"Albania",
#"Algeria.png",
#"Algeria",
#"American_Samoa.png",
#"American_Samoa",
This commands is just a replacement command (s///). It matches anything starting with #" followed by non-period chars ([^.]*) and then by .png",. Also, it matches all non-period chars before .png", using the group brackets \( and \), so we can get what was matched by this group. So, this is the to-be-replaced regular expression:
#"\([^.]*\)\.png",
So follows the replacement part of the command. The & command just inserts everything that was matched by #"\([^.]*\)\.png", in the changed content. If it was the only element of the replacement part, nothing would be changed in the output. However, following the & there is a newline character - represented by the backslash \ followed by an actual newline - and in the new line we add the #" string followed by the content of the first group (\1) and then the string ",.
This is just a brief explanation of the command. Hope this helps. Also, note that you can use the \n string to represent newlines in some versions of sed (such as GNU sed). It would render a more concise and readable command:
sed 's/#"\([^.]*\)\.png",/&\n#"\1",/' input
I prefer this over Carles Sala and Glenn Jackman's:
sed '/.png/p;s/.png//'
Could just say it's personal preference.
or one can combine both versions and apply the duplication only on lines matching the required pattern
sed -e '/^#".*\.png",/{p;s/\.png//;}' input