I'm using the graph search method of the Microsoft Academic API to retrieve paper information using the following query:
POST https://westus.api.cognitive.microsoft.com/academic/v1.0/graph/search?mode=json
Content-Type: application/json
Host: westus.api.cognitive.microsoft.com
Ocp-Apim-Subscription-Key: my-api-key
{
"path": "/paper",
"paper": {
"select": [
"PublishYear",
"CitationCount",
"ConferenceSeriesID",
"JournalID",
"AuthorIDs",
"AffiliationIDs",
"AuthorSequenceNumbers",
"OriginalAffiliations",
"NormalizedAffiliations",
"Keywords",
"FieldOfStudyIDs",
"ReferenceIDs",
"CitationIDs",
"OriginalTitle",
"NormalizedTitle",
"DOI",
"OriginalVenue",
"NormalizedVenue"
],
"type": "Paper",
"id": [2059999322, 1993355715, ...]
}
}
For this query, I'm getting one of three responses: 200 OK, 500 internal error, or 503 unavailable (same query and same list of IDs). I just tried to run this query (with the two IDs I listed in the example) five times, out of that, I got 3 correct responses, and 2 errors. Is there something in my request that's causing this or is this an error in the service?
My second question is, is there a limit on how many IDs can I submit in one query? I tried to look for this information on the documentation page, but couldn't find anything (just a rate limit in terms of how many queries can be sent per time, but nothing related to query size).
EDIT:
Response I'm getting with error 500 (using the query above):
{
'Error':
{
'Message': 'Something went wrong, if the error continue please contact us',
'Code': 'InternalError'
}
}
Response that comes with error 503 is empty for me.
I think I found what the problem is. In case anyone ever has the same issue, it seems it's certain IDs that return an error. I narrowed my set of ~150k IDs to 20 which always fail. The trouble is if an erroneous ID gets mixed in a large batch of IDs which are fine, the whole request fails.
Related
I have a sales order created using API for business central. Sales order has a single line item. I want to update the quantity of line item. Following is what I have tried so far.
Endpoint: https://api.businesscentral.dynamics.com/v1.0/domain.com/api/v1.0/companies(company_id)/salesOrders(sales_order_ide)/salesOrderLines(sales_order_line_id)
where sales order line id is of the form e86d3aa1-f2f8-ea11-aa61-0022481e3b8c-10000
as described in this document When a PATCH request is made, I get the following exception:
')' or ',' expected at position 9 in
'(sale-order-line-item-id)'.
The exception stated above was also occuring when i was simply trying to get the line item but that was fixed when I changed the URL and it took the form:
Endpoint:
https://api.businesscentral.dynamics.com/v1.0/domain.com/api/v1.0/companies(b4a4beb2-2d42-40dc-9229-5b5c371be4e3)/salesOrders(e86d3aa1-f2f8-ea11-aa61-0022481e3b8c)/salesOrderLines?filter=sequence eq 10000
This endpoint is returning correct response when i try to get the line item by issuing
GET request. However, when I issue a PATCH request using the same endpoint, with a simple request body e.g.
{"quantity" : 2.0}
it throws the exception:
'PATCH' requests for 'salesOrderLines' of EdmType 'Collection' are not
allowed within Dynamics 365 Business Central OData web services.
I am also specifying the if-Match header along with the request that contains etag value for the line item but of no avail and same exception is occurring. Am I missing something? Any help will be appreciated.
For those who may visit this question later, after much hit and trial through Postman, I finally figured out the problem. In my case if-Match header that's basically is Etag for the line item is all fine. The Problem was with API URL, specifically the way we specify the line item id. We have to specify this in single quotes so the URL for API call becomes:
https://api.businesscentral.dynamics.com/v1.0/domain.com/api/v1.0/companies(company_id)/salesOrders(sales_order_ide)/salesOrderLines('sales_order_line_id')
You would note that we are not specifying company_id and sales_order_id in single quotes, reason being, both of these parameters a of type GUID whereas sales_order_line_id is of type string as per metadata document.
I am getting below error
{
"error": {
"code": "BadRequest_NotFound",
"message": "Bad Request - Error in query syntax."
}
}
I am a learner in postman and do not have much experience in programming/scripting.
Here the issue.
Used POST api request - For getting the access token;
Used POST api request - To create an account;
Used POST api request - To cancel an account with CancellationReason
Need to crosscheck the cancellation details (some fields like cancellationReason) in web application.
In order to avoid manually check, i have used GET request api like below
by passing all the mapped fields (as per web application) in the GET request end url
(i.e. by sending the details in fetch_xml query parameter in the end url) in order to get those required fields returned.
Now i got a successful response with status code.
After that i want to compare the fetched values (from the response body) ... VS.... to the data i passed while cancelling the account (i.e. in POST api request - To cancel the account) and make sure both are same.
After that under Test tab - I have updated query like below, however it throwing an Unexpected '#' error (as the below query contains '#' in middle of the field name)
tests["Verify the CancellationReason matches"] = pm.expect(data._usr_cancellationReason_value#OData.Community.Display.V1.FormattedValue).to.eql("CancellationReason");
Can someone please help me to understand whether i should remove this #symbol or should replace with something else ?
Here is the response body:
{
"#odata.context": "https://hfrdcompanies.integrationdev01.crm3.cs.com/api/data/v9.1/$metadata#hfrd_workorders(_usr_cancellationchannel_value,usr_CancellationChannel,_usr_workorderreason_value,usr_WorkOrderReason,hfrd_workorderid,usr_cancellationuser,_usr_cancellationsource_value,usr_CancellationSource,hfrd_name,usr_CancellationChannel(),usr_AccountReason(),usr_CancellationSource())",
"value": [
{
"#odata.etag": "W/\"2345234523\"",
"_usr_cancellationchannel_value#OData.Community.Display.V1.FormattedValue": "Mobile App",
"_usr_cancellationchannel_value": "acefsdflin89-f9jf07-e969f1-a245nk11-00jnfnafn9799fc2a",
"_usr_Accountreason_value#OData.Community.Display.V1.FormattedValue": "Customer Inactive",
"_usr_Accountreason_value": "bde1234522-d45662-e2711-a84561-0007354a2d5c2a",
"hfrd_Accountid": "89025sf3-c668f-e7811-a4331-00asdhh3ab9bd1c",
"usr_cancellationuser": "Testuser08 ABC",
"_usr_cancellationsource_value#OData.Community.Display.V1.FormattedValue": "MOBILE",
"_usr_cancellationsource_value": "6c23asdf-c562-e411-a841-00asdfa",
"hfrd_name": "FP-WK-1000000642"
}
]
}
I want to validate the bold row
I am working on integrating GMB into some of our internal apps, and would like to set up to receive real-time notifications for reviews and questions.
I have created a topic, and a subscription with a valid URL.
The next step is to tell GMB to send the notifications to the topic, and I believe the endpoint is the one below. However, it is very vague about the parameters it wants.
This is the documentation
https://developers.google.com/my-business/reference/rest/v4/accounts/updateNotifications
It wants a "Notification Settings Resource Name" in the URL, but it's not explained anywhere what that actually is. I have tried every possible value, but always get a 404 error response with the message "Requested entity was not found."
Has anyone successfully set this up? What values does the "getNotifications" endpoint want, and where in the various dashboards can this be found or created?
Any help is much appreciated!
As mentioned in the comments, you need to send the accountId as part of the URL.
To find this, you will first need to send a GET request to
https://mybusiness.googleapis.com/v4/accounts
This will return something along the following lines:
{
"accounts": [
{
"name": "accounts/102647145453118950380",
"accountName": "Tom Spencer",
"type": "PERSONAL",
"state": {
"status": "UNVERIFIED",
"vettedStatus": "NOT_VETTED"
},
"profilePhotoUrl": "//lh3.googleusercontent.com/a-/AOh14GgPkuJj03DeCa1isBAJALY4eOl09WGYVFrM4mG5=s132"
},
]
}
You can see here that accounts/102647145453118950380 is returned in the name field. Take this field, and construct the following URL:
https://mybusiness.googleapis.com/v4/accounts/102647145453118950380/notifications
Send a PUT request to this URL, with a request body resembling the following:
{
"topicName": "projects/{projectId}/topics/{topicId}",
"notificationTypes": [
"NEW_REVIEW",
"UPDATED_REVIEW"
]
}
Assuming you have pub/sub setup as per the documentation, this should send a message to your topic/subscribers whenever a new review is created or a review is updated.
I am trying to update (PATCH) an existing Microsoft Planner task, to add one (1) checklist item to it. I am using Microsoft doc https://learn.microsoft.com/en-us/graph/api/plannertaskdetails-update?view=graph-rest-1.0&tabs=javascript as a reference, and I am using Postman to send the request.
{
"error": {
"code": "",
"message": "The If-Match header contains an invalid value.",
"innerError": {
"request-id": "7b50a25b-7c5a-443b-9a41-1b6314be4014",
"date": "2019-05-16T23:59:03"
}
}
}
As far as I can see, the If-Match key is built up exactly the same as how Microsoft's article used it.
I have found a somewhat similar article (https://powerusers.microsoft.com/t5/Connecting-To-Data/Custom-Connector-Graph-The-If-Match-header-must-be-specified-for/td-p/144092), but this person is filling in the If-Match value differently, and it doesn't work for me at all...
I reused the eTAG value from the response received after creating the task in the first place:
"#odata.etag": "W/\"JzEtVGFzayAgQEBAQEBAQEBAQEBAQEBARCc=\""
Does anyone have a clue what I am doing wrong here?
This is my PATCH:
https://graph.microsoft.com/v1.0/planner/tasks/n...................pYAM-DX/details
These are my headers:
Content-Type: application/json
Authorization: Bearer eyJ0eXAiOiJKV1QiLCJub..........
If-Match: W/"JzEtVGFzayAgQEBAQEBAQEBAQEBAQEBARCc="
This is my body:
{
"previewType": "checklist",
"checklist": {
"{{$guid}}":{
"#odata.type": "microsoft.graph.plannerChecklistItem",
"title": "Update task details",
"isChecked": false
}
}
}
I was expecting the If-Match key to be correct, as I have used the Microsoft article, but somehow it results in the error message:
"The If-Match header contains an invalid value."
I had similar problem. I used etag from task when updates Task details.
The Task and Task Details are different objects.
Check on - MS Graph doc
Get etag value from Task details of created task using:
GET https://graph.microsoft.com/v1.0/planner/tasks/{task-id}/details
I'm looking for a way to fetch Media Insights metrics in Instagram Graph API (https://developers.facebook.com/docs/instagram-api/reference/media/insights) with a nested query based on the userId, even when a client switched from a Personal to a Business account.
I use this nested query to fetch all the data I need : https://graph.facebook.com/v3.2/{userId}?fields=followers_count,media{media_type,caption,timestamp,like_count,insights.metric(reach, impressions)} (this part causes the error: insights.metric(reach, impressions) - it works however for an account that has always been a Business one)
However, because some media linked to the userId were posted before the user switched to a Business account, instead of returning the data only for the media posted after, the API returns this error:
{
"error": {
"message": "Invalid parameter",
"type": "OAuthException",
"code": 100,
"error_data": {
"blame_field_specs": [
[
""
]
]
},
"error_subcode": 2108006,
"is_transient": false,
"error_user_title": "Media Posted Before Business Account Conversion",
"error_user_msg": "The media was posted before the most recent time that the user's account was converted to a business account from a personal account.",
"fbtrace_id": "Gs85pUz14JC"
}
}
Is there a way to know, thru the API, which media were created before and after the account switch from Personal to Business? Or is there a way to fetch the date on which the account was switched?
The only way I currently see to get the data I need is to use the /media edge and query insights for each media until I get an error. Then I would get approximately the date I need. However, this is not optimized at all since we are rate limited to 200 calls per user per hour.
I have the same problem.
For now, I'm Switch between queries (if first have error)
"userId"?fields=id,media.limit(100){insights.metric(reach, impressions)}
"userId"?fields=id,media.limit(100)
I show the user all insights in zero.
I don't know if they're the best alternative, like identify the time of conversion to business and get the post between this range of DateTime
I got the same problem and solved it like this:
Use the nested query just like you did, including insights.metric
If the error appears, do another call without insights.metric - to at least get all other data
For most accounts, it works and there is no additional API call. For the rest, i just cannot get the insights and i have to live with it, i guess - until Facebook/IG fixes the issue.
I got the same problem and solved it like this:
Step1: Convert your Instagram account to a Professional account.
Step2: Then According to Error Post a new post on Instagram and get their Post-ID.
Step3: Then try to get a request using that Post-ID.
{Post-ID}?fields=comments_count,like_count,timestamp,insights.metric(reach,impressions)
curl -i -X GET "https://graph.facebook.com/v12.0/{Post-ID}?fields=comments_count%2Clike_count%2Ctimestamp%2Cinsights.metric(reach%2Cimpressions)&access_token={access_token}"
For more: insights
Here is the relevant logic from a script that can handle this error while still doing a full import. It works by reducing the requested limit to 1 once the error is encountered. It will keep requesting insights until it encounters the error again, then removes insights from the fields and returns to the requested limit.
limit = 50
error_2108006 = False
metrics = 'insights.metric%28impressions%29%2C' # Must be URL encoded for replacement
url = '/PAGE_ID/media?fields=%sid,caption,media_url,media_type&limit=%s' % (metrics, limit)
# While we have more pages
while True:
# Make your API call to Instagram
posts = get_posts_from_instagram(url)
# Check for error 2108006
if posts == 2108006:
# First time getting this error, keep trying to get insights but one by one
if error_2108006 is False:
error_2108006 = True
url = url.replace('limit={}'.format(limit), 'limit=1')
continue
# Not the first time. Strip out insights and return to desired limit.
url = url.replace(metrics, '')
url = url.replace('limit=1', 'limit='.format(limit))
continue
# Do something with the data
for post in posts:
continue
# If there are more pages, fetch the next URL
if 'paging' in posts and 'next' in posts['paging']:
url = posts['paging']['next']
continue
# Done
break