Is there a way I can install AWS Toolkit For Visual Studio 17 on MAC?
I downloaded the toolkit from https://marketplace.visualstudio.com/items?itemName=AmazonWebServices.AWSToolkitforVisualStudio2017. If I open it with Visual Studio, it opens the file as a text editor.
I downloaded Visual Studio Community Edition from https://www.visualstudio.com/downloads/
Currently the AWS Toolkit for Visual Studio does not support Visual Studio for Mac. See below:
https://aws.amazon.com/visualstudio/
It still does not on 21/03/2021.
Open your VS Code and go to "Extensions" on the left hand side and click on it. Search for AWS Toolkit for Visual Studio Code. Once you find it, it's a fairly straightforward process to install it!
Related
According to this forum, https://answers.microsoft.com/en-us/windows/forum/windows_10-hardware-winpc/windows-wdk-on-visual-studio-2017-community/fdbd2b44-e57a-4849-903d-04001205a764
Windows Driver Kit is not currently supported by visual studio 2017.
I tried installing the Windows Driver Kit, but the test driver projects, such as this one, fail to build
https://github.com/Microsoft/Windows-driver-samples/tree/master/serial/VirtualSerial
I get this error when building:
Error MSB8020 The build tools for WindowsUserModeDriver10.0 (Platform Toolset = 'WindowsUserModeDriver10.0') cannot be found. To build using the WindowsUserModeDriver10.0 build tools, please install WindowsUserModeDriver10.0 build tools. Alternatively, you may upgrade to the current Visual Studio tools by selecting the Project menu or right-click the solution, and then selecting "Retarget solution".
I already tried retargeting the Solution to the two options I have: 10.0.17134.0 and 8.1, but the same error keeps coming up.
What do I need to do to build this sample driver? Do I need to install VS2015? VS2017 community edition? Why isn't this WDK supported by the Visual Studio 2017 professional version?
Thanks,
Visual Studio 2017 definitely supports kernel-mode device driver development; there's no doubt about that because I've been using VS17 for it for many, many months.
Use the latest version of Windows Driver Kit (WDK) which can be downloaded and installed from MSDN: https://learn.microsoft.com/en-us/windows-hardware/drivers/download-the-wdk
Furthermore, you can always use the Enterprise WDK and then you can simply build using that if you wanted to from command-line. (Also can be found on page linked-to above)
Download the correct WDK installer for your edition of Visual Studio 2017:
WDK for Windows 10, version 1809 for Visual Studio Community 2017
WDK for Windows 10, version 1803 for Visual Studio Professional 2017
WDK for Windows 10, version 1709 for Visual Studio Enterprise 2017
Visit https://learn.microsoft.com/en-us/windows-hardware/drivers/other-wdk-downloads for more information.
Not exactly a solution, but Windows 8.1 WDK works with Visual Studio 2017 Enterprise,
Download it from here, just need to retarget the project to 8.1
https://www.microsoft.com/en-us/download/confirmation.aspx?id=42273
In addition, I needed to get VS2015 C++ Build Tool to fix a missing Microsoft.cpp.props error
http://download.microsoft.com/download/5/F/7/5F7ACAEB-8363-451F-9425-68A90F98B238/visualcppbuildtools_full.exe
Developing drivers to windows is quite interesting one will be exposed to advanced Operating System Concepts.The set up for the environment will be IDE
IDE - Visual Studio (https://visualstudio.microsoft.com/thank-you-downloading-visual-studio/?sku=Community&rel=16)
Compilers (WDK)
Debugger (WDK)
WDK contains both(https://go.microsoft.com/fwlink/?linkid=2085767). Latest Visual Studio(VS2019) will come along with the latest WDK(10, 1903 as of now).
Sometimes plugins might not work properly i.e integration issues between Visual Studio and WDk.
By going to the location "C:\Program Files (x86)\Windows Kits\10\Vsix\VS2019" and run VSIX installer.
Now in a new project, driver related templates are available.
I retrieved a C++ VS project from 2011 and it has a Install-win32.vdproj I guess it has to be the file I need to open in order to build the project.
Unfortunately Visual Studio 2017 seems not to recognize this kind of file. Is there any ways to interpret it or convert it?
For VS2017, use the Microsoft Visual Studio Installer Projects. Download link is below. Be sure to close Visual Studio before running the installer:
https://marketplace.visualstudio.com/items?itemName=VisualStudioProductTeam.MicrosoftVisualStudio2017InstallerProjects
Every time I try to install visual studio community version I run into an issue with missing setup packages. The installer particularly tells me that I am missing vcredist_x86.exe.
However, I have installed the visual c++ redistributable Packages for Visual Studio 2013 as well as the ones for visual studio 2015. I don't get why this message keeps coming up.
I can continue installation if I select "skip", but the message comes back not much later.
Try running the installer with administrator rights (right click on installer exe and select 'Run as administrator').
I just bought a new computer, with Windows 8.1 64bit installed and wanted to start developing in C++.I am new to Visual Studio, I used to do it with eclipse but suggestions I found in the internet were to prefer Visual Studio.
I tried to download Visual Studio C++ 2008 redistributable package (x64) from here http://www.microsoft.com/en-us/download/details.aspx?id=15336.
But I couldn't find where it was stored in my computer, after searching it with key words. Then I uninstalled it, to install again from scratch.
To uninstall it I opened my control panel and it saw that I have Microsoft Visual C++ 2012 Redistributable (x86) installed already, assuming it comes with the computer I bought, and the date of installation matches this. I can't find though where it is stored so I can't open it.
When downloading Visual Studio 2008, it says I need to uninstall previous Visual Studio versions.
Bottom line:
Should I uninstall the Visual 2012 (x86) that probably came with the computer (which is 64bit)? Or should I use it (and try to find where is it located)?
If I shouldn't use the 2012: Was the 2008 version I tried to install good? (2008 gives an "old" intuition, but just my intuition).
Is there an easy way to find out where the application is located for excecution? Any specific file to look for?
thank you
You want to download thee actual Visual Studio IDE from http://www.visualstudio.com/ . Try downloading the free Community Edition for a start.
The Visual Studio redistributable packages are actually the minimal runtime libraries to run C++ programs that were compiled with visual studio. You got a version installed by default even on fresh computers, otherwise you can't run many programs (they are also included with the IDE).
The redistributables are also often bundled with installers to make sure that others can run your programs.
The VC++ Redistributable packages only include the libraries required to run applications built with the respective version of Visual Studio (for example Microsoft Visual C++ 2012 Redistributable is for Visual Studio 2012).
It does not include any version of Visual Studio.
You could uninstall Microsoft Visual C++ 2012 Redistributable (x86) but however as it was preinstalled on your computer, I imagine that some program pre-installed by the computer manufacturer requires it. It's probably not a good idea to remove that.
So no, it's not a good idea to remove it.
In order to use the 2012 version of Microsoft Visual C++ 2012 Redistributable you should install the vs120 compiler, aka the VC++ compiler that comes with Microsoft Visual Studio 2012.
For developing with Microsoft Visual Studio 2008, using Microsoft Visual C++ 2008 Redistributable is completely fine as it matches the compiler version. However if you want to use the newer 2010, 2012, 2013, and 2015 versions you need to use those respective versions of the Microsoft Visual C++ Redistributable.
If you wish to use an up-to-date version of Visual Studio, try the Visual Studio 2013 Community Edition, or if you're feeling adventurous try the Visual Studio 2015 Release Candidate.
The application you built is always located in the project's directory, under /Debug or /Release, depending on whether you built a debug or release version of the application. If you do not know where your project folder is located you may right-click your project in the File pane and click Open folder in Windows Explorer.
i am developing a software using Visual C++ 2008 Express Edition. after build in release mode, i have made a setup file with latest redist 2008. the software is running in my PC fine. in my PC this redist are installed :
in my friends PC, the same redist are installed. but the software is crashing on my friends PC.
from the event log it shows:
as you can see, it is demanding 9.0.21022.8 version of redist whether there is previously installed latest version of redist(9.0.30729.17). so, i go for a google. from the internet, i edit my C:\Program Files\Microsoft Visual Studio 9.0\VC\include\crtassem.h
but it didn't help. then i check my project manifest. and i saw :
but i don't know how to edit manifest (i am new in VC++). and i also check C:\Program Files\Microsoft Visual Studio 9.0\VC\redist\x86\Microsoft.VC90.CRT\Microsoft.VC90.CRT.manifest. i shows:
i have tried to find out 9.0.21022.8 version of redist in the internet. but i have failed. from my VCExpress installer there is a file named vcredistmin_x86.exe :
as you can see the version of the file is 9.0.21022.8. i think this is the redist i need. but i cannot install it. it says "run the setup.exe file"
what can i do?
Edit(if i am asking two different answer from this question, please inform me. i will delete this edited part):
i am now wanting to deploy my project from Microsoft Visual studio 2008. i have uninstalled previous Microsoft Visual C++ 2008 express edition. but when i am trying to install Microsoft Visual studio 2008, it says
Installation Requirements:
A compatible version of Visual Studio 2008 was not detected on the
system. This update is designed for only the Microsoft Visual Studio
2008 (ENU) product family, and is not compatible with any Express
editions.
guys, have you any idea what to do?
From what I see this download is 9.0.21022.8: http://www.microsoft.com/en-us/download/details.aspx?id=29
I don't know about VS Express, in VS full version there are the vcredist_x86/x64/arm.exe available in the install directory (For VS2012: .../Microsoft Visual Studio 11.0\VC\redist\1033)
If it's acceptable for you, the simplest way to forget about this problems you can statically link with Runtime by changing your project properties: C/C++ -> Code Generation -> Runtime Library, select /MT or /MTd. Runtime library will be included into your executable so you won't have to install it on client machine.