I'm in a brain-breaking problem here. I've created a nice Magento 2.1.7 installation with two websites (two stores, two domains) and somehow after a while we are unable to login the backend of Magento.
Invalid Form Key. Please refresh the page.
Now, after trying a few options, still no success. Checked core_config_data, edit max_input_vars, nothing works. The strange thing is, on the front it's still possible to checkout and do your shopping.
Anyway, I'm stumped here. Why is this happening, and how can this be fixed. Any help is welcome.
I often get this error, clearing the cookies for that site, then opening the admin panel in a new tab will resolve this.
You can recreate this error message if you double click the login button after filling out your login information.
Here are a few other reasons you may experience this issue
The form key inputs are outside of the form, you should check the html on the admin panel to check these inputs and exists and have correct values
Make sure the link you use to get to the admin page does not already have a form key in the url
Does this issue generate anything in var/log/system.log ?
Eventually, nothing helped, but what did the trick was creating a new install, setup this new install with all necessary modules (fortunately there were only four), configure the fresh installment like the old one (long live GitHub) and compare your fresh installation to the old one in the database table core_config_data. Basically reproduce your entire setup without any products in it, but just create your stores and categories.
If you spot any differences between the new installment and the old one in the core_config_data, edit them in the old one to be the same as your new one.
Next, edit your env.php with the database credentials to the old database which you've compared and edited.
And the last step, recompile, flush/clean cache and reindex.
Oh, and word of advice, if you're going to use https for your store, setup magento on https. I think something went very wrong when we've changed the base url's from insecure to secure.
Related
I'm doing a project for a client using Django and have finally installed it on CPanel.
Everything seems to be working great, but when I try to access the admin panel, the tables group or user has an error because it says it's doing a lot of redirections.
In the admin panel, I just have this:
When I try to register something, it loads the page, like this:
But when I try to access the tables, it shows me an ERR_TOO_MANY_REDIRECTS, as shown in the following picture:
It basically says that it's not working and to try to delete my cookies. I did that, and nothing worked. In the urls.py I only have the admin path so the redirection problem is not from something I miscofigured there.
I haven't modified the installation parameters for settings.py besides the Allowed_Host variable to allow the URL of the page, the database connection using PostgreSQL and its working, and the variables of the static files are also working.
So I'm feeling deadlocked because I can't find an answer to this and I don't believe I'm the first one experiencing this.
EDIT: The only new thing that I found is this and as I said I haven't even created files yet so I don't know what Index is this:
If someone knows anything, please let me know.
I have started multiple Django projects with like four different tutorials. Every single time I try "python manage.py createsuperuser", the admin login page just loads and loads and never goes anywhere. I want to make it absolutely clear that I haven't touched a thing in the code and everything is default code. I migrated everything before login. I've tried deleting the database and re-migrating. None of that works. Can someone help me? I have made around 10-15 accounts and NONE of them work. The page just keeps loading indefinitely and never goes anywhere. I've looked at EVERY stackoverflow post and no answers work. I started a virtualenv, downloaded Django, didn't touch the code, made migrations, I followed every tutorial TOO THE LETTER(!!!) and this is what I keep getting. The current tutorial hasn't changed in default code and he signed in with no problems. I'm assuming if he did, I can...I don't think putting code in is necessary since it's all virgin code, never touched. I didn't even make any apps yet.
I've tried deleting database and re-migrating
changing the password of current superuser
deleting the entire project and following everything the instructor said (TO THE LETTER!!!)
I have made 10-15 superuser accounts and none work
This sounds similar to a problem I was seeing. I wrote a question for it here (no answers yet): Django local dev server hangs with chrome after form submission. Works in firefox
Are you using windows and the chrome browser? Try using firefox to access the admin page and login. That worked for me. I'm still trying to figure out why Chome doesn't work, though. Like you, I created a brand new project from scratch; sometimes Chrome works and most of the time it doesn't. I've also found that hitting the stop button while the browser is sitting there thinking, then refresh, makes the logged in admin page show up.
To move my live drupal 8 site to a new local site I followed this tutorial by OS Training on YouTube. I am aware that they are doing the migration the other way around, but it shouldn't make that big a difference I guess.
They tell you to start by creating your new drupal 8 site and then moving some folders between your old site and the new one. The last step is to import your old database into the database of the new site.
I did all that but when I visit my new local drupal 8 site it first appears to show nothing until you scroll A LOT and then I'm able to get to things like my content and content types, where I see that nothing has happened. If I go check the database of the new site I see that everything is there that should be there, but I just can't get it to show up on the site itself.
I guess there's something wrong with the connection to the database, but I have no clue how to fix it. Any ideas?
-sidenote: I am using Acquia Dev Desktop to set up my local site
Compare the sites/default/settings.php file between live and local.
Make sure you have cleared all caches and rebuilt the DB. Also, check for errors using chrome developer console and write them down here.
Apologies if this question is not asked correctly but I actually can't pinpoint the problem. Hence the lack of code in the question itself. I'm struggling with this error so please go easy on me....
I was developing a meteor app locally without too much difficulty. It seems to run well on localhost. But then I decided to deploy it and have been running into some problems as outlined below. I have deployed the app "successfully" using both mup/DO and modulus.io (with compose hosting the DB in both instances) and whole thing sort of works, but...
You can register fine but when you try to log in the button doesn't work...press it again and you login but the usename and password are in the URL... how does this happen?
When you login you can begin by creating a supplier, then create products for that supplier. Only thing is the suppliers are saved to the DB and they are in the product count but they are nowhere to be seen in the middle section page.
Once you create a new supplier, the add new products for the existing suppliers is no longer accessible.
I am so confounded that I don't know what code to put up so I'm giving access to my codebase - it's on github here and this is the modulus site here. Go ahead and register and you can see for yourself.
You will easily be able to see the errors in the console when you start trying to log into the site so there is no point in posting them here.
Many, many thanks in advance guys.
I have reviewed your code and I don't think that the errors occur due to the deployment.
Here's a list with a few suggestions that should help you to fix your code:
In your /client/helpers/config.js file, you try to configure the behaviour of {{> loginButtons}}. That does not make any sense, since you do not have the accounts-ui package installed.
The /client/templates/includes/header.html file references with pathFor to homepage. This route is currently not available in your /lib/router.js.
Users are able to access the /loggedIn path even if they are not logged in. Furthermore, you always redirect users to this path if the submit form event in the register template occurs. This means, they can easily bypass the registration just by clicking on the submit button.
Watch your console logs. There are a lot of template helper exceptions.
Unfortunately, I could not check the login bug you described, because I received an exception when invoking the submit event. I recommend to use a rather defensive programming approach, you should at least check if the variable's value is not undefined and if it is, then you should handle those situations accordingly.
For example, in your /client/templates/includes/login.js file, you have the following code:
var userId = Meteor.userId();
var supplier = Suppliers.findOne({userId: userId});
var supplierId = supplier._id;
This will raise an exception if supplier is undefined.
All in all, you should rethink your release planning and deployment, since your app is far from working. Furthermore, please try to break your issue into chunks next time and provide a clear problem statement, because your question won't be useful to other readers without it.
I have had WFFM running on a Sitecore instance for a while, but it has recently stopped working. When I go to "Form Designer" on an existing form, I get the standard Sitecore "The requested document was not found" page.
Requested URL: /applications/modules/web
User Name: sitecore\admin
Site Name: shell
If the page you are trying to display exists, please check that an
appropriate prefix has been added to the IgnoreUrlPrefixes setting in
the web.config.
Note that the requested URL is stated as /applications/modules/web instead of /applications/modules/web forms for marketers.
A lot of development has occurred on this site recently, so I'm not sure when exactly this started happening.
Additional: info:
Folder and file permissions are correct.
I've tried reinstalling the WFFM package, and made sure that all the files are in place.
Several processors have been added to the HttpBeginRequest pipeline, but I removed them all to test if they were the cause - they weren't.
I haven't upgraded Sitecore since WFFM was working and the version is correct.
No errors are logged
EDIT
This also seems to be affecting the Sitecore Security Editor:
Requested URL: /appl
User Name: sitecore\admin
Site Name: shell
If the page you are trying to display exists, please check that an
appropriate prefix has been added to the IgnoreUrlPrefixes setting in
the web.config.
EDIT 2
Further investigation with this is making me think it is related to the Requested URL. I originally thought the the "Not found" page was displaying the requested url incorrectly. However, if I attempt to goto mysite.com/sitecore/shell/applications/fake folder with spaces/fake page with spaces I get this error message:
Requested URL: /applications/fake folder with spaces/fake page with
spaces
User Name: sitecore\admin
Site Name: shell
If the page you are trying to display exists, please check that an
appropriate prefix has been added to the IgnoreUrlPrefixes setting in
the web.config.
As you can see the Requested Url is correct in the error message. So in relation to my problem, I think maybe Sitecore is requesting the wrong URL in the first place.
Additionally if I go to the go the following url by typing directly into the browser, then the Security Editor opens as expected:
mysite.com/sitecore/shell/Applications/Security/User-Editor
This is quite old now but I thought I'd provide an update for anyone else who encounters the problem.
Unfortunately, Sitecore support weren't able to help beyond pointing out that setting the addAspxExtension attribute to 'true' in the link provider seemed to solve the problem. This may have been acceptable except that extensionless URLs were important to the customer.
In the end I had to amend my link provider so that addAspxExtension is set to 'true' in the web config, and then I set it to false inside the GetItemUrl method for specified sites only.
So now whenever the context site is 'Shell' or 'Admin' etc, the extensions are added by default, but switched off in my main website.
Of course, this is a work around. I still don't know how to actually fix the problem
So the first thing that I am going to tell you is that I suspect that there is something wrong with your site declaration for Sitecore Modules. In your web.config, there's a site declaration for "modules_shell" and "modules_website". Those are where the code files that run the modules are usually located... a shell folder to run the parts that run in the Sitecore shell and a web folder to run the part that is accessed by the externally facing site. Please check your site declarations (and the form.config file) to make sure that you're not in live mode or something like that. I would definitely say that this is where you should start looking.
The next thing is to say that your comments about Sitecore not serving a url in the /sitecore/shell directory is really not surprising. Sitecore processes all requests unless you specifically tell it to ignore requests (like setting it in the IgnoreUrlPrefixes in web.config), it's going to try processing it. Like going to /sitecore/shell/applications gives me a layout error because it doesn't have anything set to handle that request. Now your error suggests that there is something wrong with Site declarations.. however, even if they were all right, it still wouldn't work.