When I start a EC2 Instance with
docker-machine create --driver amazonec2 --amazonec2-region eu-central-1 --amazonec2-instance-type t2.2xlarge aws-test
docker-machine can create the VM, exchange the certs but the start of the engine fails.
Log in the EC2:
ubuntu#aws-manager2:~$ systemctl status docker.service
● docker.service - Docker Application Container Engine
Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: e
Drop-In: /etc/systemd/system/docker.service.d
└─10-machine.conf
Active: inactive (dead) (Result: exit-code) since Thu 2017-06-29 09:18:44 UTC
Docs: https://docs.docker.com
Process: 5263 ExecStart=/usr/bin/docker daemon -H tcp://0.0.0.0:2376 -H unix:/
Main PID: 5263 (code=exited, status=1/FAILURE)
Jun 29 09:18:44 aws-manager2 systemd[1]: Failed to start Docker Application Cont
Jun 29 09:18:44 aws-manager2 systemd[1]: docker.service: Unit entered failed sta
Jun 29 09:18:44 aws-manager2 systemd[1]: docker.service: Failed with result 'exi
Jun 29 09:18:44 aws-manager2 systemd[1]: docker.service: Service hold-off time o
Jun 29 09:18:44 aws-manager2 systemd[1]: Stopped Docker Application Container En
Jun 29 09:18:44 aws-manager2 systemd[1]: docker.service: Start request repeated
Jun 29 09:18:44 aws-manager2 systemd[1]: Failed to start Docker Application Cont
lines 1-16/16 (END)...skipping...
● docker.service - Docker Application Container Engine
Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled)
Drop-In: /etc/systemd/system/docker.service.d
└─10-machine.conf
Active: inactive (dead) (Result: exit-code) since Thu 2017-06-29 09:18:44 UTC; 1min 53s ago
Docs: https://docs.docker.com
Process: 5263 ExecStart=/usr/bin/docker daemon -H tcp://0.0.0.0:2376 -H unix:///var/run/docker.sock --s
Main PID: 5263 (code=exited, status=1/FAILURE)
Jun 29 09:18:44 aws-manager2 systemd[1]: Failed to start Docker Application Container Engine.
Jun 29 09:18:44 aws-manager2 systemd[1]: docker.service: Unit entered failed state.
Jun 29 09:18:44 aws-manager2 systemd[1]: docker.service: Failed with result 'exit-code'.
Jun 29 09:18:44 aws-manager2 systemd[1]: docker.service: Service hold-off time over, scheduling restart.
Jun 29 09:18:44 aws-manager2 systemd[1]: Stopped Docker Application Container Engine.
Jun 29 09:18:44 aws-manager2 systemd[1]: docker.service: Start request repeated too quickly.
Jun 29 09:18:44 aws-manager2 systemd[1]: Failed to start Docker Application Container Engine.
Log at startup:
$ docker-machine create --driver amazonec2 --amazonec2-region eu-central-1 --amazonec2-instance-type t2.2xlarge aws-manager2
Running pre-create checks...
Creating machine...
(aws-manager2) Launching instance...
Waiting for machine to be running, this may take a few minutes...
Detecting operating system of created instance...
Waiting for SSH to be available...
Detecting the provisioner...
Provisioning with ubuntu(systemd)...
Installing Docker...
Copying certs to the local machine directory...
Copying certs to the remote machine...
Setting Docker configuration on the remote daemon...
Error creating machine: Error running provisioning: ssh command error:
command : sudo systemctl -f start docker
err : exit status 1
output : Job for docker.service failed because the control process exited with error code. See "systemctl status docker.service" and "journalctl -xe" for details.
Yesterday it worked with the same configuration. Could there be a change in the used AIM since yesterday? I tried it from a different host but get also the same error.
It seems that there is a bug in the Docker Version that was rollout yesterday. A Workaround for us:
docker-machine create --driver amazonec2 --engine-install-url=https://web.archive.org/web/20170623081500/https://get.docker.com
Related
I installed jenkins on Aws linux
sudo wget -O /etc/yum.repos.d/jenkins.repo http://pkg.jenkins.io/redhat-stable/jenkins.repo
sudo rpm --import http://pkg.jenkins.io/redhat-stable/jenkins.io.key
yum install jenkins
as described on the official documentation
However when I run:
service start jenkins
I get the following error message:
Starting jenkins (via systemctl): Job for jenkins.service failed because the control process exited with error code. See "systemctl status jenkins.service" and "journalctl -xe" for details.
[FAILED]
Running systemctl status jenkins.service gives me this:
● jenkins.service - LSB: Jenkins Continuous Integration Server
Loaded: loaded (/etc/rc.d/init.d/jenkins)
Active: failed (Result: exit-code) since Wed 2016-09-21 16:45:28 BST; 3min 59s ago
Docs: man:systemd-sysv-generator(8)
Process: 2818 ExecStart=/etc/rc.d/init.d/jenkins start (code=exited, status=1/FAILURE)
Sep 21 16:45:28 webstack.local.caplib jenkins[2818]: at com.sun.akuma.JavaVMArguments.of(JavaVMArguments...04)
Sep 21 16:45:28 webstack.local.caplib jenkins[2818]: at com.sun.akuma.JavaVMArguments.current(JavaVMArgu...92)
Sep 21 16:45:28 webstack.local.caplib jenkins[2818]: at com.sun.akuma.Daemon.daemonize(Daemon.java:106)
Sep 21 16:45:28 webstack.local.caplib jenkins[2818]: at com.sun.akuma.Daemon.all(Daemon.java:88)
Sep 21 16:45:28 webstack.local.caplib jenkins[2818]: ... 6 more
Sep 21 16:45:28 webstack.local.caplib systemd[1]: jenkins.service: control process exited, code=exited s...s=1
Sep 21 16:45:28 webstack.local.caplib systemd[1]: Failed to start LSB: Jenkins Continuous Integration Server.
Sep 21 16:45:28 webstack.local.caplib systemd[1]: Unit jenkins.service entered failed state.
Sep 21 16:45:28 webstack.local.caplib systemd[1]: jenkins.service failed.
Sep 21 16:45:28 webstack.local.caplib jenkins[2818]: [FAILED]
Hint: Some lines were ellipsized, use -l to show in full.
After doing all jenkins setup in my AWS machine we got error-----
Starting jenkins (via systemctl): Job for jenkins.service failed because the control process exited with error code. See "systemctl status jenkins.service" and "journalctl -xe" for details.
[FAILED]
I have a work around this. please try once and vote here .
1)Uninstall all java version installed
command- sudo yum remove java*
2) install java 11 by using below command
command -sudo amazon-linux-extras install java-openjdk11
i'm sure it will resolve your issue .
Note: this issue is because our Jenkins were updated and few things in Java8 was not compatible with latest Jenkins version
I want to setup a NFS server on GCP, so used a VM, mounted the GCS bucket on /vol using the gcsfuse. Then installed nfs-kernel-server packages on the VM, created a dir nfs_share under /vol, added the entry in /etc/exports and while restarting the nfs-kernel-server service, ran into the below error:
sudo systemctl status nfs-kernel-server
● nfs-server.service - NFS server and services
Loaded: loaded (/lib/systemd/system/nfs-server.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Sat 2022-06-04 15:28:54 UTC; 10s ago
Process: 2139 ExecStopPost=/usr/sbin/exportfs -f (code=exited, status=0/SUCCESS)
Process: 2138 ExecStopPost=/usr/sbin/exportfs -au (code=exited, status=0/SUCCESS)
Process: 2137 ExecStartPre=/usr/sbin/exportfs -r (code=exited, status=1/FAILURE)
Jun 04 15:28:54 g-non-prod-nfs-test-vm systemd[1]: Starting NFS server and services...
Jun 04 15:28:54 g-non-prod-nfs-test-vm exportfs[2137]: exportfs: /vol/nfs_share requires fsid= for NFS export
Jun 04 15:28:54 g-non-prod-nfs-test-vm systemd[1]: nfs-server.service: Control process exited, code=exited status=1
Jun 04 15:28:54 g-non-prod-nfs-test-vm systemd[1]: nfs-server.service: Failed with result 'exit-code'.
Jun 04 15:28:54 g-non-prod-nfs-test-vm systemd[1]: Stopped NFS server and services.
Filestore a service of GCP (NFS instance) needs to be deployed with 1TB storage as a minimum, thus looking for alternatives. Above approach looks feasible, but unable to get the nfs service up and running.
Job for nginx.service failed because the control process exited with error code.
See "systemctl status nginx.service" and "journalctl -xe" for details.
Prior to this prompt, the server was working fine, but when I tried to config the server for subdomain it failed to work with this error.
Also for detailed error ...
[ec2-user#ip--------- conf.d]$ systemctl status nginx.service
? nginx.service - The nginx HTTP and reverse proxy server
Loaded: loaded (/usr/lib/systemd/system/nginx.service; disabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Tue 2020-07-07 06:03:04 UTC; 4min 17s ago
Process: 71445 ExecStartPre=/usr/sbin/nginx -t (code=exited, status=1/FAILURE)
Process: 71444 ExecStartPre=/usr/bin/rm -f /run/nginx.pid (code=exited, status=0/SUCCESS)
Main PID: 70298 (code=exited, status=0/SUCCESS)
Jul 07 06:03:04 ip-999.ap-south-1.compute.internal systemd[1]: Starting The nginx HTTP and reverse proxy serv>
Jul 07 06:03:04 ip-999.ap-south-1.compute.internal nginx[71445]: nginx: [emerg] unexpected end of file, expec>
Jul 07 06:03:04 ip-999.ap-south-1.compute.internal nginx[71445]: nginx: configuration file /etc/nginx/nginx.c>
Jul 07 06:03:04 ip-999.ap-south-1.compute.internal systemd[1]: nginx.service: Control process exited, code=ex>
Jul 07 06:03:04 ip-999.ap-south-1.compute.internal systemd[1]: nginx.service: Failed with result 'exit-code'.
Jul 07 06:03:04 ip-999.ap-south-1.compute.internal systemd[1]: Failed to start The nginx HTTP and reverse pro>
lines 1-13/13 (END)
You can always check configuration errors by using this command :
nginx -T
before launch a catastrophic restart :)
You have an error unexpected end of file, check the syntax of your NGINX configuration as it is likely that you have a broken file.
The likely candidate is forgetting to close a } character.
I am trying to install redis on my AWS server. I have Ubuntu 18.04 installed on it. I am following steps to install redis from digitalocean article.
When i run sudo systemctl status redis command i am getting below error.
screenshot
I tried to edit /etc/systemd/system/redis.service file and added Type=forking under [Service] section but still getting the same error.
Can anyone suggest me how i can get it fixed?
Thanks in advance.
Based on same digitalocean tutorial, actually it's running fine.
Run this command sudo systemctl restart redis.service, we get (showing "failed" on last line):
● redis.service - Redis In-Memory Data Store
Loaded: loaded (/etc/systemd/system/redis.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Mon 2021-06-28 12:03:11 +03; 1min 0s ago
Process: 20428 ExecStart=/usr/local/bin/redis-server /etc/redis/redis.conf (code=exited, status=
Main PID: 20428 (code=exited, status=203/EXEC)
Jun 28 12:03:11 XYZ systemd[1]: redis.service: Service hold-off time over, scheduling restar
Jun 28 12:03:11 XYZ systemd[1]: redis.service: Scheduled restart job, restart counter is at
Jun 28 12:03:11 XYZ systemd[1]: Stopped Redis In-Memory Data Store.
Jun 28 12:03:11 XYZ systemd[1]: redis.service: Start request repeated too quickly.
Jun 28 12:03:11 XYZ systemd[1]: redis.service: Failed with result 'exit-code'.
Jun 28 12:03:11 XYZ systemd[1]: Failed to start Redis In-Memory Data Store.
But if you run sudo service redis-server status, we get (showing "running" on 3rd line):
● redis-server.service - Advanced key-value store
Loaded: loaded (/lib/systemd/system/redis-server.service; enabled; vendor preset: enabled)
Active: active (running) since Mon 2021-06-28 11:50:13 +03; 19min ago
Docs: http://redis.io/documentation,
man:redis-server(1)
Process: 19278 ExecStop=/bin/kill -s TERM $MAINPID (code=exited, status=0/SUCCESS)
Process: 19371 ExecStart=/usr/bin/redis-server /etc/redis/redis.conf (code=exited, status=0/SUCC
Main PID: 19382 (redis-server)
Tasks: 4 (limit: 4915)
CGroup: /system.slice/redis-server.service
└─19382 /usr/bin/redis-server 127.0.0.1:6379
Jun 28 11:50:13 XYZ systemd[1]: Starting Advanced key-value store...
Jun 28 11:50:13 XYZ systemd[1]: redis-server.service: Can't open PID file /var/run/redis/red
Jun 28 11:50:13 XYZ systemd[1]: Started Advanced key-value store.
After searching for hours, it seems like it's some difference between systemctl & service and nothing more, but the actual redis server is running fine. Corrects me if that's not the case. Here's the link: https://askubuntu.com/questions/903354/difference-between-systemctl-and-service-commands
You can even check if redis is working fine, by redis-cli ping, should print PONG
I also encountered this problem, then I tried to check it again.
Finally, I found that when I authorized /var/lib/redis, I entered the wrong command, causing the redis account to have no access to /var/lib/redis.
sudo chown redis:redis /var/lib/redis
sudo systemctl restart redis
succeeded.
I´m using docker tools on windows.
create command was working perfectly last week and I managed to create a number of machines on Digital Ocean. Then I tried today with no success. I repeated the same command with different regions and I always get the same result:
λ docker-machine create -d digitalocean --digitalocean-access-token=MYTOKEN --digitalocean-region=ams2 vmname
Running pre-create checks...
Creating machine...
(fernu) Creating SSH key...
(fernu) Creating Digital Ocean droplet...
(fernu) Waiting for IP address to be assigned to the Droplet...
Waiting for machine to be running, this may take a few minutes...
Detecting operating system of created instance...
Waiting for SSH to be available...
Detecting the provisioner...
Provisioning with ubuntu(systemd)...
Installing Docker...
Copying certs to the local machine directory...
Copying certs to the remote machine...
Setting Docker configuration on the remote daemon...
Error creating machine: Error running provisioning: ssh command error:
command : sudo systemctl -f start docker
err : exit status 1
output : Job for docker.service failed because the control process exited with error code. See "systemctl status docker.service" and "journalctl -xe" for details.
If I execute the suggested command:
root#fernu:~# systemctl status docker.service
● docker.service - Docker Application Container Engine
Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled)
Drop-In: /etc/systemd/system/docker.service.d
└─10-machine.conf
Active: inactive (dead) (Result: exit-code) since Fri 2017-06-30 20:56:13 UTC; 8min ago
Docs: https://docs.docker.com
Process: 4943 ExecStart=/usr/bin/docker daemon -H tcp://0.0.0.0:2376 -H unix:///var/run/docker.sock --storage-driver aufs --tlsverify --tlscacert /etc/docker/ca.pem --tlscert /etc/docker/server.pem --tlskey /etc/docker/server-key.pem --label provider=digitalocean (code=exited, status=1/FAILURE)
Main PID: 4943 (code=exited, status=1/FAILURE)
Jun 30 20:56:13 fernu systemd[1]: docker.service: Main process exited, code=exited, status=1/FAILURE
Jun 30 20:56:13 fernu systemd[1]: Failed to start Docker Application Container Engine.
Jun 30 20:56:13 fernu systemd[1]: docker.service: Unit entered failed state.
Jun 30 20:56:13 fernu systemd[1]: docker.service: Failed with result 'exit-code'.
Jun 30 20:56:13 fernu systemd[1]: docker.service: Service hold-off time over, scheduling restart.
Jun 30 20:56:13 fernu systemd[1]: Stopped Docker Application Container Engine.
Jun 30 20:56:13 fernu systemd[1]: docker.service: Start request repeated too quickly.
Jun 30 20:56:13 fernu systemd[1]: Failed to start Docker Application Container Engine.
Any help would be appreciated
Update
It´s working with ubuntu 14:
--digitalocean-image=ubuntu-14-04-x64 so it seams like a problem with the default image (ubuntu-16-04-x64)
This seems to be hitting a lot of people. TL;DR: There is a bug in docker-machine v0.12.0 and this issue can be resolved by upgrading.
Logging in to the DigitalOcean instance and running journalctl -xe provides more information:
-- Unit docker.service has begun starting up.
Jul 07 20:03:52 docker-sandbox docker[4930]: `docker daemon` is not supported on Linux. Please run `do
Jul 07 20:03:52 docker-sandbox systemd[1]: docker.service: Main process exited, code=exited, status=1/
Jul 07 20:03:52 docker-sandbox systemd[1]: Failed to start Docker Application Container Engine.
-- Subject: Unit docker.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
The key here is docker daemon is not supported on Linux. A bug in docker-machine's version comparison code caused an incorrect systemd unit file to be produced (located at /etc/systemd/system/docker.service.d/10-machine.conf) on certain versions of Ubuntu.
A fix has been committed and a new release (v0.12.1) was made.
You can grab the latest release at: https://github.com/docker/machine/releases/tag/v0.12.1