Problem is to find and replace word throughout file. I'm trying to rename several fields but not edit the system names for those fields. In the end, need to find/replace the Issue, Issues, issue, issues. I'm using Netbeans (find and replace regex) to open the .properties file which contains this code, but open to using something else.
Text to right side of equals sign needs to be replaced. Sometimes there are periods next to the word on the right, most of the time there aren't. Trying to use regex because there are around 10000 lines in the file (this is to the display text of system fields without changing the field reference itself).
Example of text to be searched:
issue.columns.admin.title=Issue Navigator Default Columns
browseproject.issues.by.status.more=View these issues in the Issue Navigator
sorted by Status
issue.operations.voting.resolved=You cannot vote or change your vote on
resolved issues.
Using the following as a pattern in netbeans, which gets around 90% correct.
(?<!([=.[a-z]]))issue(?!([[a-z]]))
However, it also matches the 'issue.' in fields like 'issue.operations.voting.resolved', which means that finding and replacing would cause problems by changing reference to the system fields. Is there a way to add to what I have already done to make it match words with periods appearing after the equals sign but not before?
You may use
(?i)(\G(?!^)|^[^=\n\r]*=)(.*?)\bissues?\b
Replace with $1$2<SOME_REPLACEMENT>.
See the regex demo.
It matches:
(?i) - an inline case insensitive modifier making the pattern case insensitive
(\G(?!^)|^[^=\n\r]*=) - Group 1 (referred to with $1 from the replacement pattern): either the location after the previous match (\G(?!^)) or the start of a line that is followed with 0+ chars other than = and line break chars and then a =
(.*?) - Group 2 (referred to with $2 from the replacement pattern): any 0+ chars, as few as possible, up to the first occurrence of...
\bissues?\b - a whole word issue or issues
Related
I managed to do most of my conversion in VBA Macro (Word > txt) but some changes were made also that I could not forego or get around. Unfortunately, I had not been in the habit of using styles and precise formatting in my docs... (Which is why a PanDoc conversion did not "pan" out well, if you'll excuse the pun.)
In my docs, I was using bold text/lines for in-text titles (not Heading 2 alas) but as I was converting mid-sentence one or two-word bold phrases into phrases to go between double square brackets, the makeshift titles/headings were also changed to [[some title]] format in the process.
With Find and Replace (a batch script that goes through all files in a folder would also do), I would like to search for each and any number of instances of CRLF [[some title CRLF]]CRLF and replace the brackets with ** (to make the title bold), or perhaps ## to make the headings I was missing back in MS Word (I would of course need the line breaks as well).
For better understanding, please see attached picture here:
I am fairly sure that all instances are similarly syntaxed. If not, I may be able to tailor your regex code to differing instances later on.
As you can see, I was trying to do it in two steps but that's not good, because the second step (which I couldn't even get right) would propably have altered other texts I need intact (there must be sentences that start with double brackets after CRLF).
I would need the two steps in one so that only the targeted double bracketed text would be changed to bold or Heading 2.
Basically what I could not do is: find the proper regex solution for matching double CRLF-ed and square-bracketed text for any number of words than may occupy more than one line and starts with a capital letter. I would need an empty line above and below the title as indicated in the image (the VBA macro somehow made two instances of CRLF and carried the brackets to a new line, which I do not like, either).
EDIT.
In the meantime I managed to cook something up but now I couldn't insert the CRLF in front of the match string. At this point this is not enough as other instances are also changed, even lowercase in-line items, for some reason...
Regex:
\[\[([A-Z][\S\s]+?)\]\]
Substitution:
## $1\r\n
https://regex101.com/r/mH6B9N/1
Since then, I made improvements towards what I wanted (I had to test in NotePad++ and not Regex101, for different results), but now in multiple documents I have found match across spill-over lines, as described in here:
Single line regex search in Notepad++
Is it possible that I cannot do what I want? The problem is having non-title text strings having line-break, double brackets and capitalized letters.
What it looks like in other documents:
See here.
I circled around with red in image for clarification. See also:
https://regex101.com/r/8XsIGx/1
Is it possible to match a certain word like "címnél" and not execute on that match if that word is present in a line?
Thanks very much in advance,
F.
You can use
(?s)\R\K\[\[((?:(?!\[\[|]]).)*)\R*]](?=\R)
Replace with ## $1. See the regex demo.
Details:
(?s) - equivalent of the . matches newline option
\R - a line break sequence
\K - omit the text matched so far (the newlines)
\[\[ - a [[ text
((?:(?!\[\[|]]).)*) - Group 1: any char, as many as possible occurrences, that does not start a [[ or ]] char sequence
\R* - zero or more line breaks
]] - a ]] text
(?=\R) - immediately to the right, there must be a line break.
Doing a find and replace in VsCode on a large amount of files. I'm looking to replace all spaces after a set of quotes, but only on a specific line.
I can very easily find all spaces using \s+, but I don't understand how to capture only the spaces after a specific string(one specific line). I've tried positive look behinds, but I can only get it to match the first space, but I need to match all spaces on that line.
Example code:
variable = "01 - Testing this thing"
I need to find and replace all the spaces between the quotation marks with underscores, but I can't get any regex to match all the spaces between the quotes. I might want to replace the dash(-) as well, but the spaces are more important and I'm struggling to figure it out.
Here is a pretty good workflow.
Open a Search Editor (from the Command Palette or set a keybinding to it).
Use this regex (?<=variable = ")[^"]*.
That will find all matches in all files in your workspace or whatever folders you designate in the file to include filter. I suggest setting the context lines option to 0.
Ctrl+Shift+L to select all your matches. The matches are the 01 - Testing this thing part.
Now do a regular find in that search editor tab - with the Find in Selection option enabled.
Simply doing a find of and replaceAll with _ will make all those changes (in the Search Editor only).
To apply those changes to all the files with your initial search results, use the extension search-editor-apply-changes Apply Search Editor Changes... command.
Then you can check to see if the changes were as you expected and save all. It will open all affected files so you can inspect them.
Seems like a few steps but notice the first regex can be very simple. And then you are doing a simple find/replace in just those selections. Demo:
You search for a string that matches, it has A space between the quotes. Replace with what is before and after the space but the space is now an underscore. You have to apply this as often as the max number od spaces in a string. It can't be done in 1 regex search-replace.
In the Search Bar
Find Regex:
(variable = "[^" ]*) ([^"]*")
Replace:
$1_$2
Then apply Replace All (button) and Refresh (button) until no more searches found.
I need some help with building up my regex.
What I am trying to do is match a specific part of text with unpredictable parts in between the fixed words. An example is the sentence one gets when replying to an email:
On date at time person name has written:
The cursive parts are variable, might contains spaces or a new line might start from this point.
To get this, I built up my regex as such: On[\s\S]+?at[\s\S]+?person[\s\S]+?has written:
Basically, the [\s\S]+? is supposed to fill in any letter, number, space or break/new line as I am unable to predict what could be between the fixed words tha I am sure will always be there.
Now comes the hard part, when I would add the word "On" somewhere in the text above the sentence that I want to match, the regex now matches a much bigger text than I want. This is due to the use of [\s\S]+.
How am I able to make my regex match as less characters as possible? Using "?" before the "+" to make it lazy does not help.
Example is here with words "From - This - Point - Everything:". Cases are ignored.
Correct: https://regexr.com/3jdek.
Wrong because of added "From": https://regexr.com/3jdfc
The regex is to be used in VB.NET
A more real life, with html tags, can be found here. Here, I avoided using [\s\S]+? or (.+)?(\r)?(\n)?(.+?)
Correct: https://regexr.com/3jdd1
Wrong: https://regexr.com/3jdfu after adding certain parts of the regex in the text above. Although, in html, barely possible to occur as the user would never write the matching tag himself, I do want to make sure my regex is correctjust in case
These things are certain: I know with what the part of text starts, no matter where in respect to the entire text, I know with what the part of text ends, and there are specific fixed words that might make the regex more reliable, but they can be ommitted. Any text below the searched part is also allowed to be matched, but no text above may be matched at all
Another example where it goes wrong: https://regexr.com/3jdli. Basically, I have less to go with in this text, so the regex has less tokens to work with. Adding just the first < already makes the regex take too much.
From my own experience, most problems are avoided when making sure I do not use any [\s\S]+? before I did a (\r)?(\n)? first
[\s\S] matches all character because of union of two complementary sets, it is like . with special option /s (dot matches newlines). and regex are greedy by default so the largest match will be returned.
Following correct link, the token just after the shortest match must be geschreven, so another way to write without using lazy expansion, which is more flexible is to prepend the repeated chracter set by a negative lookahead inside loop,
so
<blockquote type="cite" [^>]+?>[^O]+?Op[^h]+?heeft(.+?(?=geschreven))geschreven:
becomes
<blockquote type="cite" [^>]+?>[^O]+?Op[^h]+?heeft((?:(?!geschreven).)+)geschreven:
(?: ) is for non capturing the group which just encapsulates the negative lookahead and the . (which can be replaced by [\s\S])
(?! ) inside is the negative lookahead which ensures current position before next character is not the beginning of end token.
Following comments it can be explicitly mentioned what should not appear in repeating sequence :
From(?:(?!this)[\s\S])+this(?:(?!point)[\s\S])+point(?:(?!everything)[\s\S])+everything:
or
From(?:(?!From|this)[\s\S])+this(?:(?!point)[\s\S])+point(?:(?!everything)[\s\S])+everything:
or
From(?:(?!From|this)[\s\S])+this(?:(?!this|point)[\s\S])+point(?:(?!everything)[\s\S])+everything:
to understand what the technic (?:(?!tokens)[\s\S])+ does.
in the first this can't appear between From and this
in the second From or this can't appear between From and this
in the third this or point can't appear between this and point
etc.
I have such txt file:
ххх.prontube.ru
salo.ru
bbb.antichat.ru
yyy.ru
xx.bb.prontube.ru
zzz.com
srfsf.jwbefw.com.ua
Trying to delete all subdomains with such regex:
Find: .+\.((.*?)\.(ru|ua|com\.ua|com|net|info))$
Replace with: \1
Receive:
prontube.ru
salo.ru
antichat.ru
yyy.ru
prontube.ru
zzz.com
com.ua
Why last line becomes com.ua instead of jwbefw.com.ua ?
This works without look around:
Find: [a-zA-Z0-9-.]+\.([a-zA-Z0-9-]+)\.([a-zA-Z0-9-]+)$
Replace: \1\.\2
It finds something with at least 2 periods and only letters, numbers, and dashes following the last two periods; then it replaces it with the last 2 parts. More intuitive, in my opinion.
There's something funny going on with that leading xxx. It doesn't appear to be plain ASCII. For the sake of this question, I'm going to assume that's just something funny with this site and not representative of your real data.
Incorrect
Interestingly, I previously had an incorrect answer here that accumulated a lot of upvotes. So I think I should preserve it:
Find: [a-zA-Z0-9-]+\.([a-zA-Z0-9-]+)\.(.+)$
Replace: \1\.\2
It just finds a host name with at least 2 periods in it, then replaces it with everything after the first dot.
The .+ part is matching as much as possible. Try using .+? instead, and it will capture the least possible, allowing the com.ua option to match.
.+?\.([\w-]*?\.(?:ru|ua|com\.ua|com|net|info))$
This answer still uses the specific domain names that the original question was looking at. As some TLD (top level domains) have a period in them, and you could theoretically have a list including multiple subdomains, whitelisting the TLD in the regex is a good idea if it works with your data set. Both current answers (from 2013) will not handle the difference between "xx.bb.prontube.ru" and "srfsf.jwbefw.com.ua" correctly.
Here is a quick explanation of why this psnig's original regex isn't working as intended:
The + is greedy.
.+ will zip all the way to the right at the end of the line capturing everything,
then work its way backwards (to the left) looking for a match from here:
(ru|ua|com\.ua|com|net|info)
With srfsf.jwbefw.com.ua the regex engine will first fail to match a,
then it will move the token one place to the left to look at "ua"
At that point, ua from the regex (the second option) is a match.
The engine will not keep looking to find "com.ua" because ".ua" met that requirement.
Niet the Dark Absol's answer tells the regex to be "lazy"
.+? will match any character (at least one) and then try to find the next part of the regex. If that fails, it will advance the token, .+ matching one more character and then evaluating the rest of the regex again.
The .+? will eventually consume: srfsf.jwbefw before matching the period, and then matching com.ua.
But the implimentation of ? also creates issues.
Adding in the question mark makes that first .+ lazy, but then causes group1 to match bb.prontube.ru instead of prontube.ru
This is because that first period after the bb will match, then inside group 1 (.*?) will match bb.prontube. before \.(ru|ua|com\.ua|com|net|info))$ matches .ru
To avoid this, change that third group from (.*?) to ([\w-]*?) so it won't capture . only letters and numbers, or a dash.
resulting regex:
.+?\.(([\w-])*?\.(ru|ua|com\.ua|com|net|info))$
Note that you don't need to capture any groups other than the first. Adding ?: makes the TLD options non-capturing.
last change:
.+?\.([\w-]*?\.(?:ru|ua|com\.ua|com|net|info))$
Search what: .+?\.(\w+\.(?:ru|com|com\.au))
Replace with: $1
Look in the picture above, what regex capture referring
It's color the way you will not need a regex explaination anymore ....
I'm terrible at regex and need to remove everything from a large portion of text except for a certain variable declaration that occurs numerous times, id like to remove everything except for instances of mc_gross=anyint.
Generally we'd need to use "negative lookarounds" to find everything but a specified string. But these are fairly inefficient (although that's probably of little concern to you in this instance), and lookaround is not supported by all regex engines (not sure about notepad++, and even then probably depends on the version you're using).
If you're interested in learning about that approach, refer to How to negate specific word in regex?
But regardless, since you are using notepad++, I'd recommend selecting your target, then inverting the selection.
This will select each instance, allowing for optional white space either side of the '=' sign.
mc_gross\s*=\s*\d+
The following answer over on super user explains how to use bookmarks in notepad++ to achieve the "inverse selection":
https://superuser.com/questions/290247/how-to-delete-all-line-except-lines-containing-a-word-i-need
Substitute the regex they're using over there, with the one above.
You could do a regular expression replace of ^.*\b(mc_gross\s*=\s*\d+)\b.*$ with \1. That will remove everything other than the wanted text on each line. Note that on lines where the wanted text occurs two or more times, only one occurrence will be retained. In the search the ^.*\b matches from start-of-line to a word boundary before the wanted text; the \b.*$ matches everything from a word boundary after the wanted text until end of line; the round brackets capture the wanted text for the replacement text. If text such as abcmc_gross=13def should be matched and retained as mc_gross=13 then delete the \bs from the search.
To remove unwanted lines do a regular expression search for ^mc_gross\s*=\s*\d+$ from the Mark tab, tick Bookmark line and click Mark all. Then use Menu => Search => Bookmark => Remove unmarked lines.
Find what: [\s\S]*?(mc_gross=\d+|\Z)
Replace with: \1
Position the cursor at the start of the text then Replace All.
Add word boundaries \b around mc_gross=\d+ if you think it's necessary.