I am using opencart version : 2.0.1.1. having one product name : AKU SABLJASTA ŽAGA Stanley
google base feed url is:
mysite.com/index.php?route=feed/google_base
the issue is when I check the browser it displays like:
AKU SABLJASTA ŽAGA Stanley
you can see that Ž is replaced with Ĺ˝.
I know there must be some charset changes required. the line is coming from:
catalog/controller/feed/google_base.php
Line 23: $output .= '<title>' . $product['name'] . '</title>';
any idea how to fix this?
Try this:
$output .= '<title>' . iconv(mb_detect_encoding($product['name'], mb_detect_order(), true), "UTF-8", $product['name']) . '</title>';
It detects the encoding and then convert it to UTF-8.
You must have iconv & mbstring extensions enabled in your php installation.
Related
I am new to bash and having problem understanding how to get this done.
Check all "To:" field email address domains and list all unique domains to a variable to compare it to from domain.
I get the "from address" domain by using
grep -m 1 "From: " filename | cut -f 2 -d '#' | cut -d ">" -f 1
when reading a mail stored in file filename.
For "to address" domain there can be multiple To: addresses and having multiple domains. I am not sure how to get unique domains from "to address field".
Example to address line will be like this:
To: user#domain.com, user2#domain.com,
User Name <sample#domaintest.com>, test#domainname.com
grep -m 1 "^To: " filename | cut -f 2 -d '#' | cut -d ">" -f 1
but there are different format of email. So I am not sure if grep is right or if I should search for awk or something.
I need to get the unique domain list from the "To:" field email address/addresses to a variable in bash script.
Desired output for above example:
domain.com,domaintest.com,domainname.com
If you are hellbent on doing this with line-oriented utilities, there is a utility formail in the Procmail distribution which can normalize things for you somewhat.
bash$ formail -czxTo: <<\==test==
> From: me <sender#example.com>
> To: you <first#example.org>,
> them <other#example.net>
> Subject: quick demo
>
> Very quick, innit.
> ==test==
first#example.org, other#example.net
So with that you have input which you can actually pass to grep or Awk ... or sed.
fromdom=$(formail -czxTo: <message | tr ',' '\n' | sed 's/.*#//')
The From: address will not be normalized by formail -czxFrom: but you can use a neat trick: make formail generate a reply back to the From: address, and then extract the To: header from that.
todoms=$(formail -rtzcxTo: <message | sed 's/.*#//')
In some more detail, -r says to create a new reply to whoever sent you message, and then we do -zcxTo: on that.
(The -t option may or may not do what you want. In this case, I would perhaps omit it. http://www.iki.fi/era/procmail/formail.html has (vague) documentation for what it does; see also the section just before http://www.iki.fi/era/procmail/mini-faq.html#group-writable and sorry for the clumsy link -- there doesn't seem to be a good page-internal anchor to link to.)
Email address normalization is tricky because there are so many variants to choose from.
From: Elvis Parsley <king#graceland.example.com>
From: king#graceland.example.com
From: "Parsley, Elvis" <king#graceland.example.com> (kill me, I have to use Outlook)
From: "quoted#string" <king#graceland.example.com> (wait, he is already dead)
To: This could fold <recipient#example.net>,
over multiple lines <another#example.org>
I would turn to a more capable language with proper support for parsing all of these formats. My choice would be Python, though you could probably also pull this off in a few lines of Ruby or Perl.
The email library was revamped in Python 3.6 so this assumes you have at least that version. The email.Headerregistry class which is new in 3.6 is particularly convenient here.
#!/usr/bin/env python3
from email.policy import default
from email import message_from_binary_file
import sys
if len(sys.argv) == 1:
sys.argv.append('-')
for arg in sys.argv[1:]:
if arg == '-':
handle = sys.stdin
else:
handle = open(arg, 'rb')
message = message_from_binary_file(handle, policy=default)
from_dom = message.get('From').address.domain
to_doms = set()
for addr in message.get('To').addresses:
dom = addr.domain
if dom == from_dom:
continue
to_doms.add(dom)
print(','.join([from_dom] + list(to_doms)))
if arg != '-':
handle.close()
This simply produces a comma-separated list of domain names; you might want to do the rest of the processing in Python too instead, or change this so that it prints something in a slightly different format.
You'd save this in a convenient place (say, /usr/local/bin/fromto) and mark it as executable (chmod 755 /usr/local/bin/fromto). Now you can call this from the shell like any other utility like grep.
I have a real simple script to update a table based on a flat file but am concerend as the list keeps getting longer and longer a non valid formatted variable will get introduced and cause issues.
#!/bin/bash
OLDIFS=$IFS
IFS=,
file1=file.csv
while read mac loc; do
dbaccess modemdb <<EndOfUpdate 2>/dev/null
UPDATE profile
SET localization= '$loc'
WHERE mac_address = '$mac';
EndOfUpdate
done <"$file1"
IFS=$OLDIFS
The file contents are as such.
12:BF:20:1B:D3:22,RED-1234
12:BF:20:2D:FF:1B,BLUE-1234
12:BF:20:ED:74:0D,RED-9901
12:BF:20:02:69:7C,GREEN-4321
12:BF:20:02:6B:42,BROWN
12:BF:20:ED:74:0D,BLACK
What I am having difficulty with is how can I set a format check of the $mac and $loc variables so if they don't match it stops running. the $loc can be any 19 digits so just need to make sure its not null and not longer. The mac address needs to be not null and in the format as in the file. I found reference in another post to this check but not sure how to integrate.
`[[ "$MAC_ADDRESS" =~ "^([0-9a-fA-F]{2}:){5}[0-9a-fA-F]{2}$" ]]`
Looking for help on how to create the validations.
Thanks,
Check MAC address with regex:
#!/bin/bash
file1=file.csv
while IFS="," read mac loc; do
if [[ "$mac" =~ ^([0-9a-fA-F]{2}:){5}[0-9a-fA-F]{2}$ ]]; then
dbaccess modemdb <<EndOfUpdate 2>/dev/null
UPDATE profile
SET localization= '$loc'
WHERE mac_address = '$mac';
EndOfUpdate
else
echo "Error: $mac"
fi
done <"$file1"
Your regex is for bash only a string if you use quotation marks.
I need to download a monthly broadcast automatically (will set a scheduled task) using powershell.
Here is the embedded URL: https://www.jw.org/download/?fileformat=MP4&output=html&pub=jwb&issue=201601&option=TRGCHlZRQVNYVrXF&txtCMSLang=E
The only thing that changes each month is the 201602, 201603, etc. Once I have able to pull the 720p video file, I will work on programmatically adding that part of the URL, based on the current system clock (I can manage this)
I have tried these without success:
Attempt 1:
$source = "https://www.jw.org/download/?fileformat=MP4&output=html&pub=jwb&issue=201601&option=TRGCHlZRQVNYVrXF&txtCMSLang=E"
$destination = "c:\broadcasts\test.mp4"
Invoke-WebRequest $source -OutFile $destination
Attempt 2:
$source = "https://www.jw.org/download/?fileformat=MP4&output=html&pub=jwb&issue=201601&option=TRGCHlZRQVNYVrXF&txtCMSLang=E"
$dest = "c:\broadcasts\test.mp4"
$wc = New-Object System.Net.WebClient
$wc.DownloadFile($source, $dest)
Attempt 3:
Import-Module BitsTransfer
$url = "https://www.jw.org/download/?fileformat=MP4&output=html&pub=jwb&issue=201601&option=TRGCHlZRQVNYVrXF&txtCMSLang=E"
$output = "c:\broadcasts\test.mp4"
Start-BitsTransfer -Source $url -Destination $output
Both of these end up with a test.mp4 that is basically just an empty file.
Then I found the another page that holds the video (and the download links for different qualities) and tried to pull these links using the following (I know I could have used $webpage.links):
Attempt 4:
$webpage=Invoke-webrequest "http://tv.jw.org/#en/video/VODStudio/pub-
jwb_201601_1_VIDEO"
$webpage.RawContent | Out-File "c:\scripts\webpage.txt" ASCII -Width 9999
And found that the raw content doesn't have the mp4 visible. My idea was to pull the raw content, parse it with regex and grab the 720p URL, save it in a variable and then send that to a BitsTransfer bit of code.
Please help?
I am actually using wamp 2.5 with PHP 5.5.12 and when I try to create a phar file it returns me the following message :
Uncaught exception 'UnexpectedValueException' with message 'creating archive "..." disabled by the php.ini setting phar.readonly'
even if I turn to off the phar.readonly option in php.ini.
So how can I enable the creation of phar files ?
I had this same problem and pieced together from info on this thread, here's what I did in over-simplified explanation:
in my PHP code that's generating this error, I added echo phpinfo(); (which displays a large table with all sort of PHP info) and in the first few rows verify the path of the php.ini file to make sure you're editing the correct php.ini.
locate on the phpinfo() table where it says phar.readonly and note that it is On.
open the php.ini file from step 1 and search for phar.readonly. Mine is on line 995 and reads ;phar.readonly = On
Change this line to phar.readonly = Off. Be sure that there is no semi-colon at the beginning of the line.
Restart your server
Confirm that you're phar project is now working as expected, and/or search on the phpinfo()table again to see that the phar.readonly setting has changed.
phar.readonly can only be disabled in php.ini due to security reasons.
If you want to check that it's is really not done using other method than php.ini then in terminal type this:-
$ php -r "ini_set('phar.readonly',0);print(ini_get('phar.readonly'));"
If it will give you 1 means phar.readonly is On.
More on phar.configuration
Need to disable in php.ini file
Type which php
Gives a different output depending on machine e.g.
/c/Apps/php/php-7.2.11/php
Then open the path given not the php file.
E.g. /c/Apps/php/php-7.2.11
Edit the php.ini file
could do
vi C:\Apps\php\php-7.2.11\php.ini
code C:\Apps\php\php-7.2.11\php.ini
[Phar]
; http://php.net/phar.readonly
phar.readonly = Off
; http://php.net/phar.require-hash
phar.require_hash = Off
Save
Using php-cli and a hashbang, we can set it on the fly without messing with the ini file.
testphar.php
#!/usr/bin/php -d phar.readonly=0
<?php
print(ini_get('phar.readonly')); // Must return 0
// make sure it doesn't exist
#unlink('brandnewphar.phar');
try {
$p = new Phar(dirname(__FILE__) . '/brandnewphar.phar', 0, 'brandnewphar.phar');
} catch (Exception $e) {
echo 'Could not create phar:', $e;
}
echo 'The new phar has ' . $p->count() . " entries\n";
$p->startBuffering();
$p['file.txt'] = 'hi';
$p['file2.txt'] = 'there';
$p['file2.txt']->compress(Phar::GZ);
$p['file3.txt'] = 'babyface';
$p['file3.txt']->setMetadata(42);
$p->setStub('<?php
function __autoload($class)
{
include "phar://myphar.phar/" . str_replace("_", "/", $class) . ".php";
}
Phar::mapPhar("myphar.phar");
include "phar://myphar.phar/startup.php";
__HALT_COMPILER();');
$p->stopBuffering();
// Test
$m = file_get_contents("phar://brandnewphar.phar/file2.txt");
$m = explode("\n",$m);
var_dump($m);
/* Output:
* there
**/
✓ Must be set executable:
chmod +x testphar.php
✓ Must be called like this:
./testphar.php
// OUTPUT there
⚠️ Must not be called like this:
php testphar.php
// Exception, phar is read only...
⚠️ Won't work called from a CGI web server
php -S localhost:8785 testphar.php
// Exception, phar is read only...
For anyone who has changed the php.ini file, but just doesn't see any changes. Try to use the CLI version of the file. For me, it was in /etc/php/7.4/cli/php.ini
Quick Solution!
Check:
cat /etc/php/7.4/apache2/php.ini | grep phar.readonly
Fix:
sed -i 's/;phar.readonly = On/;phar.readonly = Off/g' /etc/php/7.4/apache2/php.ini
Has anyone ran into this issue? When the script gets to the banner text the script just hangs.
I am using Net::Appliance::Session
Here is the error I get in debug. The rest of the script inserts code perfectly. I did test what I read about adding a # to the banner for each line. Same result.
banner login +
[ 4.092880] tr nope, doesn't (yet) match (?-xism:[\/a-zA-Z0-9._\[\]-]+ ?(?:\(config[^)]*\))? ?[#>] ?$)
[ 4.093124] du SEEN:
banner login +
[ 4.093304] tr nope, doesn't (yet) match (?-xism:[\/a-zA-Z0-9._\[\]-]+ ?(?:\(config[^)]*\))? ?[#>] ?$)
[ 4.305872] du SEEN:
Enter TEXT message. End with the character '+'
[ 4.306121] tr nope, doesn't (yet) match (?-xism:[\/a-zA-Z0-9._\[\]-]+ ?(?:\(config[^)]*\))? ?[#>] ?$)
We had an issue when accessing the device : 10.49.216.74
The reported error was : read timed-out at /usr/lib/perl5/site_perl/5.10.0/Net/CLI/Interact/Transport/Wrapper/Net_Telnet.pm line 35
Here is a snip of code.
my $session_obj = Net::Appliance::Session->new(
host => $ios_device_ip,
transport => 'Telnet',
personality => 'ios',
timeout => 60,
);
#interace
$session_obj->set_global_log_at('debug');
eval {
# try to login to the ios device, ignoring host check
$session_obj->connect(
username => $ios_username,
password => $ios_password,
#SHKC => 0
);
# get our running config
$version_info = $session_obj->begin_privileged;
$session_obj->cmd('conf t');
$session_obj->cmd('line con 0');
$session_obj->cmd('exec-character-bits 8');
$session_obj->cmd('international');
$session_obj->cmd('line vty 0 4');
$session_obj->cmd('exec-character-bits 8');
$session_obj->cmd('international');
$session_obj->cmd('line vty 5 15');
$session_obj->cmd('exec-character-bits 8');
$session_obj->cmd('international');
$session_obj->cmd('exit');
$session_obj->cmd('no banner login');
$session_obj->cmd('banner login +');
$session_obj->cmd('*************************************************************************');
$session_obj->cmd('* test *');
$session_obj->cmd('* *');
$session_obj->cmd('*************************************************************************');
$session_obj->cmd('+');
$session_obj->cmd('no banner MOTD');
$session_obj->cmd('banner motd +');
$session_obj->cmd('*************************************************************************');
$session_obj->cmd('* test *');
$session_obj->cmd('* *');
$session_obj->cmd('*************************************************************************');
$session_obj->cmd('+');
$session_obj->cmd('exit');
$session_obj->cmd('write memory');
$session_obj->end_privileged;
# close down our session
$session_obj->close;
};
If you look at the regexp that matches the prompt before sending a new command you'll see that it requires a specific string that closely matches user, privileged or config mode of a router.
When you send the banner login + command you get the Enter TEXT message. End with the character '+' followed by blank line from a router (instead of Router(config)# that your script expects. After a while it just times out since there is no match for the regexp.
The easiest solution is to try to send the whole banner in one command. Try concatenating your banner with a \r in one string and sending it as a one command that looks like (note the double quotes):
$session_obj->cmd("banner login + line1 \r line2 \r line3\r +");
Took way too long to figure this out... spaces are not your friend.
$session_obj->cmd("banner login + \rline1\rline2\rline3\r+");
Example with my orginal problem:
$session_obj->cmd('*************************************************************************\r* test *\r* *\r*************************************************************************');