How to compile the newest gcc release under Windows 10? I have the latest mingw-w64available here which isn't fully c++17 compliant (I cannot use the filesystem library). A build called winlibs is also available but it is built on mingw-w64 8.0.0, so newer standards aren't fully supported. I downloaded the compressed file gcc-10.3.0.tar.gz.
What are the steps needed to do build any new (or old) gcc release on Windows natively without resorting to cygwin or msys or wsl?
Building GCC isn't trivial. It involves multiple steps, starting with having all the dependancies available.
You already had an older winlibs release, who don't you just get the latest winlibs build from http://winlibs.com/ ?
I do not understand what problem you are having with std::filesystem. Perhaps you are using a different mingw. Here is how I get mingw64
Download and install the latest g++ 64 bit compiler from
http://www.msys2.org/ Follow installation instructions on that page.
Note that you will have to stop and restart the MSYS2 command line
tool several times. To do this, close the window and then run
C:\msys64\msys2_shell. When pacman ( packet manager ) reports "there
is nothing to do" run it once more with the command pacman -S
mingw-w64-x86_64-toolchain
I am setting up Eclipse CDT for C++ and I installed the GCC compiler from equation.com. I installed it and the code wasn't updating so i decided to re-install. I deleted the MinGW folder and tried to run the installer again and now getting an error from the installer "System cannot find the file specified".
Also any help on uninstalling Code::Blocks as they are the same category of packages without magic uninstalling would be great.
Background Info: I am running Eclipse Mars and Windows 10
I'm going to list out all the steps I've taken so far:
Download MinGW
Install MSYS installation for MinGW Developers (I don't think I needed this?)
Install mingw32-base
Install mingw32-base
Install mingw32-gcc-g++
Install msys-base (Don't think I needed this either)
Add MINGW_HOME Environment Variable and MINGW_HOME\bin to Path.
Check versions of gcc, g++, and gdb (all showed they were successfully installed)
However, when I open Eclipse I get two errors indicating that g++ and gcc are not in my Path.
How do I fix or get around these errors?
i am new to linux and I have the following question:
I am trying to install MINGW in Ubuntu.
I ran the command:
sudo apt-get install mingw-w64
It was installed, and if i put the command gcc it runs ok. The problem is g++ command does not work. I guess it is because i don't have the c++ compiler (as I read in similar questions in stackoverflow).
I read too that you can use the next command:
mingw-get install g++
but i don't have the executable program for this command.
My question is, how can I install that executable? or is there another way to update my mingw so I can use the g++ compiler?
Hope I have explained myself correctly. Thank you for any help I receive.
mingw-get is a windows specific package manager, it is not needed when you use a native linux package manager such as APT.
Installing package mingw-w64 depends on package g++-mingw-w64, which depends on g++-mingw-w64-i686 and g++-mingw-w64-x86-64.
These packages install the mingw cross compilers as
/usr/bin/x86_64-w64-mingw32-g++-posix
/usr/bin/x86_64-w64-mingw32-g++-win32
/usr/bin/i686-w64-mingw32-g++-posix
/usr/bin/i686-w64-mingw32-g++-win32
Older versions of mingw cross compiler shipped /usr/bin/i586-mingw32msvc-c++, which is replaced by i686-w64-mingw32-c++-win32
You can usually use this toolchain in a project by running ./configure CXX=i686-w64-mingw32-c++-win32 or make CXX=i686-w64-mingw32-c++-win32
Note: the above description is correct for the most recent toolchain in Debian unstable. It may need some minor tweaking for older systems.
I'm used to manually install GCC from source before on Ubuntu and it was a painful process. So I really don't want to do repeat this process. Currently, I have MinGW and GCC (4.6.2) installed on my machine. So is there an easy way to update GCC without building it entirely from source? Has anyone done it before can share me some tips?
Update using terminal:
Run the command prompt/terminal (cmd or sh).
Update the package list:
mingw-get update
After updating the package list, run:
mingw-get upgrade
When the command finishes running, all of your packages will be upgraded.
Update using the GUI version:
If you aren't used to the terminal, there is also a GUI version of MinGW called "MinGW Installation Manager", which is normally located at:
C:\MinGW\libexec\mingw-get\guimain.exe
When the GUI is open, tap Installation -> Update Catalogue. This will update the package list.
After that, tap Installation -> Mark All Upgrades. This will select all of the packages which can be upgraded.
Finally, tap Installation -> Apply Changes to apply the upgrades.
Snapshots and release builds of the MinGW http://code.google.com/p/mingw-builds/downloads/list
UPDATE: As of Nov-5-2012, MinGW includes 4.7.2 of the GCC compiler, which is the most current version. I personally will use the MinGW package, since it includes MSYS and other tools, and since it is the defacto standard, I hope that it is better supported. The only drawback is the included GDB does not include Python scripting, but I think that can be updated separately.
I don't know if you can update the GCC in MinGW, but there are alternative projects to MinGW with newer versions of GCC.
The MinGW-builds project provides a package similar to MinGW but with an updated GCC (4.7.2). I extracted the files to c:\MinGW (so I could use the same path) after moving my existing MinGW to another folder. Only MinGW has MSYS, so if you need that (I did) copy the msys folder from the original MinGW.
After installing MinGW-builds, the result of g++ --version:
g++ (Built by MinGW-builds project) 4.7.2
The latest GCC that comes with standard MinGW is currently 4.7.0. I compiled a few simple projects in Code::Blocks, and the latest wxWidgets source, and everything seems to work.
It's worth noting that MinGW-builds includes a Python script enabled version of GDB, in case you want STL pretty printer support, or other GDB Python features.
Another good choice is TDM-GCC, which is a project that hosts an impressive installer that includes an updated GCC compiler (4.7.1) and support tools. It is a standalone package. As far as I can tell, Python scripting is not supported in the GDB that comes with this package.
Finally there is the MinGW-w64 project, which is a fork of MinGW. Rubenvb, who posted an answer to this question, has good standalone packages (in the personal builds folder) based on this project which include an updated GCC (4.7.2). The included GDB seems to be Python script enabled.
if you use MSYS2
just open mingw64-console and type in:
# Update the package database and core system packages with:
pacman -Syu
# If needed, close MSYS2, run it again from Start menu. Update the rest with:
pacman -Su
I have built a more up to date GCC 4.7 (it's built within code freeze, so it should be equivalent with the release). Also, this build contains <thread> support.
32-bit
64-bit
The -gcc_linux package is what you want if you want to use it on Linux. Just extract somewhere and add the mingw??/bin directory to PATH.
PS: There's a native Windows compiler and a Windows Clang build. I suggest using Clang only with one of my GCC 4.6 builds, as it has trouble with GCC 4.7's libstd++. Extract the Clang package in the same directory as the GCC package and it will work out of the box.
The MinGW-w64 build from http://winlibs.com/ has the latest GCC version and requires no installation, just unzip the download. To upgrade you can just replace the mingw32 or mingw64 folder with the new version.
To get latest MinGW64 in Windows: https://sourceforge.net/projects/mingw-w64/?source=typ_redirect
For all platforms: https://mingw-w64.org/doku.php/download
You just need to update your g++ compiler if its not.
First problem can be solved through this:
Update using the GUI version:
If you aren't used to the terminal, there is also a GUI version of MinGW called "MinGW Installation Manager", which is normally located at:
C:\MinGW\libexec\mingw-get\guimain.exe
When the GUI is open, tap
Installation -> Update Catalogue
. This will update the package list.
After that, tap
Installation -> Mark All Upgrades
. This will select all of the packages which can be upgraded.
Finally, tap
Installation -> Apply Changes
to apply the upgrades.
2nd Problem could be that if you didn't updated the path of mingw in environment variables.