I want to achieve something like that in C (ARM platform):
char a[] = {0xAA, 0xBB, 0xCC, 0xDD, 0x11, 0x22, 0x33, 0x44};
uint32_t *aUint = (uint32_t *)a;
Then I can use:
printf("%X", aUint[1]);
and the result will be:
0x11223344
Now I would like to do the same in C++, but when I try to do something like this (assuming string length % 4 == 0):
std::string str("some human readable ");
uint32_t *dataByWord = reinterpret_cast<uint32_t>(&str);
I get output:
error: cast from ‘const std::__cxx11::basic_string<char>*’ to ‘uint32_t {aka unsigned int}’ loses precision [-fpermissive]
Is there a way to reinterpret input string to avoid any loops or copying?
The solution:
uint32_t *dataByWord = reinterpret_cast<uint32_t*>(str.c_str());
Related
I need to add a 64 bit floating point number into an unsigned char array at specific indexes (ex. index 1 through 8).
Example unsigned char array:
unsigned char msg[10] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
I want to add a floating point number like 0.084, for example, which is represented as 1B2FDD240681B53F in hex (little endian) to the unsigned char array at indexes 1,2,3,4,5,6,7,8 and leave indexes 0 and 9 unchanged.
So, I would like the unsigned char array, msg, to contain the following:
msg = {0x00, 0x1B, 0x2F, 0xDD, 0x24, 0x06, 0x81, 0xB5, 0x3F, 0x00}
So far I can get a std::string with the hexadecimal representation of the example floating point value 0.084 using the following code but I'm not sure how to add the string values back into the unsigned char array:
#include <iostream>
#include <sstream>
#include <iomanip>
using namespace std;
int main()
{
union udoub
{
double d;
unsigned long long u;
};
double dVal = 0.084;
udoub val;
val.d = dVal;
std::stringstream ss;
ss << std::setw(16) << std::setfill('0') << std::hex << val.u << std::endl;
std::string strValHexString = ss.str();
cout<< strValHexString << std::endl;
return 0;
}
Output:
3fb5810624dd2f1b
I tried using std::copy like in the example below to copy the values from the std::string to an unsigned char but it doesn't seem to do what I want:
unsigned char ucTmp[2];
std::copy(strValHexString.substr(0,2).begin(), strValHexString.substr(0,2).end(), ucTmp);
Looking for a C or C++ solution.
Formatting the component bytes into a hex string and then reading those back in again is a terrible waste of time and effort. Just use std::memcpy() (in C++) or memcpy (in C):
std::memcpy(&msg[1], &dVal, sizeof(dVal));
This will take care of any required pointer alignment issues. However, it will not do any 'interpretation' in terms of your endianness - but this shouldn't be a problem unless you're then transferring that byte array between different platforms.
Your example has undefined behaviour due to reading from an inactive member of a union. A well defined way to do the conversion to integer:
auto uVal = std::bit_cast<std::uint64_t>(dVal);
Now that you have the data in an integer, you can use bitwise operations to extract individual octets in specific positions:
msg[1] = (uVal >> 0x0 ) & 0xff;
msg[2] = (uVal >> 0x8 ) & 0xff;
msg[3] = (uVal >> 0x10) & 0xff;
msg[4] = (uVal >> 0x18) & 0xff;
msg[5] = (uVal >> 0x20) & 0xff;
...
This can be condensed into a loop.
Note that this works the same way regardless of endianness of the CPU. The resulting order in the array will always be little endian unlike in the direct std::memcpy approach which results in native endianness which is not necessarily little endian on all systems. However, if floating point and integers use different endianness, then the order won't be the same even with this approach.
I have an input array with hex values,
const unsigned char arr[]={0x20, 0x34, 0x30};
I need to concatenate the values arr[1]---> 0x34 ---> 4 and
arr[2]---> 0x30 ---> 0
to an integer variable like,
int val = 40;
How can I do this efficiently in c++?.
As The Paramagnetic Croissant commented, you can turn the array to a string (null terminated at the very least) and use strtol
Example:
const unsigned char arr[]={0x20, 0x34, 0x30};
string s(reinterpret_cast<const char*>(arr), 3);
int val = strtol(s.c_str(), nullptr, 10);
My array looks something like this;
unsigned char send_bytes[] = { 0x0B, 0x11, 0xA6, 0x05, 0x00, 0x00, 0x70 };
One of the values is a variable that can change all the time.. so I tried something like this;
const char* input = "0x05";
unsigned char send_bytes[] = { 0x0B, 0x11, 0xA6, input, 0x00, 0x00, 0x70 };
When I compile I get a warning;
warning: initialization makes integer from pointer without a cast
I am a little confused on the conversion I need to do.. since the array has hex strings in it.. and the input string is a char..
in the first line you are declaring a pointer to const char, and initializing to the beginning of string "0x05", that's fine, but it is not the thing you are trying to do.
in the second line, you try to initialize the fourth array element (an unsigned char) with the value of the pointer you assigned to the input variable in the first line. The compiler says you are pretending to embed a pointer value (the address of "0x05" string) into a char variable, so that's why it complained. And also it is not what you intend.
also, take into account that if you are using binary data (from the fact you are initializing arrays with hex numbers) you had better to use unsigned char for binaries, as signed char is valid only for -128 to +127 values, you can expect some more unpredictable behaviour. Perhaps, a declaration typedef unsigned char byte; can do things easier.
typedef unsigned char byte;
byte send_bytes[] = { 0x0b, 0x11, 0xa6, 0x00, 0x00, 0x00, 0x70 };
byte &input = send_bytes[3]; /* input is an alias of send_bytes[3] */
BR,
Luis
Maybe explaining exactly what const char* input = "0x05"; does will clear things up for you.
First the compiler computes the string data and creates it as a static object:
const char data[5] = { 0x30, 0x78, 0x30, 0x35, 0x0 };
Then your variable is initialized:
const char *input = &data[0];
Note that input is a pointer with a value that depends entirely upon the location the compiler chooses to store the string data at, and has nothing to do with the contents of the string. So if you say char c = input; then c basically gets assigned a random number.
So you should be asking yourself "Where is the value 0x05 that I want to store in the send_bytes array?" In your code it's encoded as text, rather than as a number that your program can use directly. You need to figure out how to convert from a string of symbols following the hexadecimal scheme of representing numbers into C++'s native representation of numbers.
Here are a couple hints. Part of the operation involves associating values with each digit symbol. The symbol '0' is associated with the value zero, '1' with the value one, and so on, according to the usual hexadecimal system. Second, once you can get the associated value of a symbol, then you can use those values in some basic arithmetic operations to figure out the value of the number represented by the whole string of symbols.
For example, if you have the symbols '1' '2' and 'a', in that order from left to right then the arithmetic to compute what number is represented is 1 * 16 * 16 + 2 * 16 + 10.
The error string is pretty much telling you exactly what's wrong.
input is of type const char* (a pointer to a const char), whereas your array send_bytes is of type unsigned char[] (an array of unsigned chars).
First, signed and unsigned values are still different types, though your error message isn't referring to that specifically.
In reality, your input value isn't a string (as there is no true string type in C++), but a pointer to a character. This means that the input string doesn't hold the byte x05, but rather the bytes {x30, x78, x30, x35, x00}.
The compiler is saying Hey, I've no idea what you're trying to do, so I'm just converting the address that string I don't understand (input) to an unsigned char and adding it to the array.
That means if the string "0x05" starts at location 0xAB, your array will ultimately contain { 0x0B, 0x11, 0xA6, 0xAB, 0x00, 0x00, 0x70 }.
You're going to either have to convert from a string to an integer using a radix of 16, or just not use a string at all.
I'd also recommend reading up on pointers.
The array doesn't have "hex strings" in it - if they were, they would be enclosed in quotation marks, like all strings.
The literals are integers written in hexadecimal notation, and equivalent to
unsigned char send_bytes[] = { 11, 17, 166, input, 0, 0, 112 };
Since it's an array of unsigned char you should put an unsigned char there:
unsigned char input = 0x05;
unsigned char send_bytes[] = { 0x0B, 0x11, 0xA6, input, 0x00, 0x00, 0x70 };
You had better to put in your code:
unsigned char send_bytes[] = { 0x0b, 0x11, 0xa6, 0x00, 0x00, 0x00, 0x70 };
unsigned char &input = send_bytes[3]; /* input is an alias of send_bytes[3] */
this way you can do things like:
input = 0x26;
send_packet(send_bytes);
I was recently in an interview and was given the question:
Look at this code and write its output:
unsigned char buff[] = { 0x11, 0x11, 0x11, 0x11, 0x22, 0x22, 0x22, 0x22, 0x33, 0x33, 0x33, 0x33 };
unsigned long *pD = (unsigned long *)buff;
unsigned short *pS = (unsigned short *)buff;
void *pEnd = &buff[sizeof(buff) - 1];
for (; pD < pEnd; pD++)
printf("0x%X\n", *pD);
for (; pS < pEnd; pS++)
printf("0x%X\n", *pS);
return 0;
Now assuming the system is 32bits and unsigned long is 4 bytes, the answer is:
0x11111111
0x22222222
0x33333333
0x1111
0x1111
0x2222
0x2222
0x3333
0x3333
Now for my question:
Why does it print only 16 bits with the unsigned short variable?
I know that unsigned short is 2 bytes but printf knows how much bytes to parse from the stack based on the %X, which is read as unsigned int. I would assume that it will read 4 bytes (unsigned int) at all times, with sometimes junk (or corrupted stack eventually).
What do you think?
Thanks!
*pS is of type unsigned short, so this value is used. Though printf expects an int for %X, you provide an unsigned short, which is promoted to int. So the order is: first 2 bytes are read from your array because *pS is unsigned short. Then this unsigned short value is promoted to int.
You don't have pointers in the output. By dereferencing you're telling printf to output a short and that's what it does. %X only displays that as hex.
How could insert text by argument and automatically transform it to hex?
I tried with:
unsigned char aesKey[32] = argv[1];
but get errors
The output would be like this:
unsigned char aesKey[32] = {
0x53, 0x28, 0x40, 0x6e, 0x2f, 0x64, 0x63, 0x5d, 0x2d, 0x61, 0x77, 0x40, 0x76, 0x71, 0x77, 0x28,
0x74, 0x61, 0x7d, 0x66, 0x61, 0x73, 0x3b, 0x5d, 0x66, 0x6d, 0x3c, 0x3f, 0x7b, 0x66, 0x72, 0x36
};
unsigned char *buf;
aes256_context ctx;
aes256_init(&ctx, aesKey);
for (unsigned long i = 0; i < lSize/16; i++) {
buf = text + (i * 16);
aes256_encrypt_ecb(&ctx, buf);
}
aes256_done(&ctx);
Thanks in advance
In C and C++, when you have code like
char name[]="John Smith";
The compiler knows at compile time what the size of that char array, and all the values will be. So it can allocate it on the stack frame and assign it the value.
When you have code like
char * strptr = foo();
char str[] = strptr;
The compiler doesn't know what the size and value of the string pointed by strptr is. That is why this is not allowed in C/C++.
In other words, only string literals can be assigned to char arrays, and that too only at the time of declaration.
So
char name[] = "John Smith";
is allowed.
char name[32];
name = "John Smith";
is not allowed.
Use memcpy
So you could use memcpy. (Or use c++ alternative that others have alluded to)
unsigned char *aesKey;
size_t len = (strlen(argv[1])+1)*sizeof(unsigned char);
aesKey = malloc(len);
memcpy(aesKey, argv[1], len);
The old solution
(here is my previous answer, the answer above is better)
So you need to use strncpy.
unsigned char aesKey[32];
strncpy((char *) aesKey, argv[1], 32);
Notice the routine is strncpy not strcpy. strcpy is unsafe. (Thanks PRouleau for the arg fix)
If strncpy is not available in Visual Studio then you may have to try strcpy_s (Thanks Google: user:427390)
In C/C++, the compiler does not automatically manipulate the arrays. You have to specify how to copy them.
The good old way is with memcpy(). A more modern way is with std::copy(). In any case, you have to validate the length of argv[1] before copying into aesKey.
For the conversion into hex, you probably have to transform a string like "AAEE3311" (up to 2*32 chars) into bytes. You should use std::istringstream and fill your aesKey position by position.
Ex:
std::istringstream Input(argv[1]);
Input >> std::hex >> aesKey[0];
I would imagine a program being called as below -
myprog 0x53 0x28 0x40 0x6e 0x2f 0x64 0x63
Inside the program I would have a loop to assign the arguments to the array -
const int size = 32;
unsigned char aesKey[size];
char* p;
for (int i = 1; i < argc || i < size; ++i)
{
aesKey[i] = (unsigned char)strtol(argv[i], &p, 16);
}