I have one data analytics requirement on AWS. I have limited knowledge on Big Data processing, but based on my
analysis, I have figured out some options.
The requirement is to collect data by calling a Provider API every 30 mins. (data ingestion)
The data is mainly structured.
This data need to be stored in a storage (S3 data lake or Red Shift.. not sure)and various aggregations/dimensions from this data are to be provided through a REST API.
There is a future requirement to run ML algorithms on the original data and hence the storage need to be decided accordingly. So based on this, can you suggest:
How to ingest data (Lambda to run at a scheduled interval and pull data, store in the storage OR any better way to pull data in AWS)
How to store (store in S3 or RedShift)
Data Analytics (currently some monthly, weekly aggregations), what tools can be used? What tools to use if I am storing data in S3.
Expose the analytics results through an API. (Hope I can use Lambda to query the Analytics engine in the previous step)
Ingestion is simple. If the retrieval is relatively quick, then scheduling an AWS Lambda function is a good idea.
However, all the answers to your other questions really depend upon how you are going to use the data, and then work backwards.
For Storage, Amazon S3 makes sense at least for the initial storage of the retrieved data, but might (or might not) be appropriate for the API and Analytics.
If you are going to provide an API, then you will need to consider how the API code (eg using AWS API Gateway) will need to retrieve the data. For example, is it identical to the blob of data original retrieved, or are there complex transformations required or perhaps combining of data from other locations and time intervals. This will help determine how the data should be stored so that it is easily retrieved.
Data Analytics needs will also drive how your data is stored. Consider whether an SQL database sufficient. If there are millions and billions of rows, you could consider using Amazon Redshift. If the data is kept in Amazon S3, then you might be able to use Amazon Athena. The correct answer depends completely upon how you intend to access and process the data.
Bottom line: Consider first how you will use the data, then determine the most appropriate place to store it. There is no generic answer that we can provide.
I'm currenty using Apache NiFi to ingest realtime data using kafka, I would like to take this data to redshift to have a near real time transacction table for online analytics of campaign results and other sutff.
The catch, if I use Kinesis or copy from S3 I would have a LOT of read/writes from/to S3, I found on previous experiences that this becomes very expensive.
So, is there a way to send data to a redshift table without constant locking the destination table? the idea is putting the data directly from NiFi without persisting it. I have a hourly batch process so it would not be a problem if I lost a couple or rows on the on online stream.
Why redshift? that's the Data Lake platform and it will become handy to cross online data with other tables.
Any idea?
Thanks!
I am trying to automate the entire data loading, that means whenever I upload a file to Google Cloud storage, it automatically triggers the data to be uploaded into the BigQuery dataset. I know that there is a daily set timing update available, but I want something where it only triggers whenever the CSV file is re-uploaded.
You have 2 possibilities:
Either you react on event. I mean you can plug a function on Google Cloud Storage events. In the event message you have the file stored in GCS and you can do what you want with it, for exemple run a load job from Google Cloud Storage.
Or, do nothing! Let the file in GCS and create a BigQuery federated table to read into GCS
With this 2 solutions, your data are accessible by BigQuery. Your Datastudio graph can query BigQuery, the data are here. However.
The load job is more efficient, you can partition and clusterize your data for optimize the speed and the cost. However, you duplicate your data (from GCS) and you have to code and to run your function. Anyway, cost is very low and function very simple. For Big Data it's my recommended solution
The federated table are very useful when the quantity of data is low and for occasional access or for prototyping. You can't clusterize and partition your data and the speed is lower than data loaded into BigQuery (because the CSV parsing is performing on the fly).
So, Big Data is a wide area: do you need to transform the data before the load? can you transform them after the log? How can you link query the ones after the others? ....
Don't hesitate if you have other questions on this!
I'm quite new to AWS products and have been learning from their tutorials a lot. Recently I'm building an end-to-end IoT application to do near real time spatial analytics. So the scenario is that we will deploy several sensors in each room/space and examine the spatial correlation across all the sensor measurements every once a while (maybe every 10s). The iot sensor data payload would look like this:
{"roomid": 1,"sensorid":"s001", "value": 0.012}
Kinesis seems powerful for real time analytics, so Im sending data from IoT to kinesis stream, and then using kinesis analytics to perform data aggregation using tumbling window and enrich measurements with sensor locations. The processed data to be sent out would look like this now[pic]:
kinesis analytics data
My plan was to send data from kinesis analytics to kinesis stream and then invoke lambda function to do spatial analysis. It seems that the records with same rowtime(process time) will be sent within a single event in kinesis stream. But I want to apply lambda function to each room separately, how can I separate these records from kinesis stream? (Am I using the wrong strategy?)
I'm also looking for a data storage solution for the sensor data. Any advice? There are many mature time-series DB but I want to find the best suitable DB for spatial analysis. Shall I look into graph DB, like Neo4j?
Thanks,
Sasa
I have a web app that needs to send reports on its usage, I want to use Amazon RedShift as a data warehouse for that purpose,
How should i collect the data ?
Every time, the user interact with my app, i want to report that.. so when should i write the files to S3 ? and how many ?
What i mean is:
- If do not send the info immediately, then I might lose it as a result of a connection lost, or from some bug in my system while its been collected and get ready to be sent to S3...
- If i do write files to S3 on each user interaction, i will end up with hundreds of files (on each file has minimal data), that need to be managed, sorted, deleted after been copied to RedShift.. that dose not seems like a good solution .
What am i missing? Should i use DynamoDB instead, Should i use simple insert into Redshift instead !?
If i do need to write the data to DynamoDB, should i delete the hold table after been copied .. what are the best practices ?
On any case what are the best practices to avoid data duplication in RedShift ?
Appreciate the help!
It is preferred to aggregate event logs before ingesting them into Amazon Redshift.
The benefits are:
You will use the parallel nature of Redshift better; COPY on a set of larger files in S3 (or from a large DynamoDB table) will be much faster than individual INSERT or COPY of a small file.
You can pre-sort your data (especially if the sorting is based on event time) before loading it into Redshift. This is also improve your load performance and reduce the need for VACUUM of your tables.
You can accumulate your events in several places before aggregating and loading them into Redshift:
Local file to S3 - the most common way is to aggregate your logs on the client/server and every x MB or y minutes upload them to S3. There are many log appenders that are supporting this functionality, and you don't need to make any modifications in the code (for example, FluentD or Log4J). This can be done with container configuration only. The down side is that you risk losing some logs and these local log files can be deleted before the upload.
DynamoDB - as #Swami described, DynamoDB is a very good way to accumulate the events.
Amazon Kinesis - the recently released service is also a good way to stream your events from the various clients and servers to a central location in a fast and reliable way. The events are in order of insertion, which makes it easy to load it later pre-sorted to Redshift. The events are stored in Kinesis for 24 hours, and you can schedule the reading from kinesis and loading to Redshift every hour, for example, for better performance.
Please note that all these services (S3, SQS, DynamoDB and Kinesis) allow you to push the events directly from the end users/devices, without the need to go through a middle web server. This can significantly improve the high availability of your service (how to handle increased load or server failure) and the cost of the system (you only pay for what you use and you don't need to have underutilized servers just for logs).
See for example how you can get temporary security tokens for mobile devices here: http://aws.amazon.com/articles/4611615499399490
Another important set of tools to allow direct interaction with these services are the various SDKs. For example for Java, .NET, JavaScript, iOS and Android.
Regarding the de-duplication requirement; in most of the options above you can do that in the aggregation phase, for example, when you are reading from a Kinesis stream, you can check that you don't have duplications in your events, but analysing a large buffer of events before putting into the data store.
However, you can do this check in Redshift as well. A good practice is to COPY the data into a staging tables and then SELECT INTO a well organized and sorted table.
Another best practice you can implement is to have a daily (or weekly) table partition. Even if you would like to have one big long events table, but the majority of your queries are running on a single day (the last day, for example), you can create a set of tables with similar structure (events_01012014, events_01022014, events_01032014...). Then you can SELECT INTO ... WHERE date = ... to each of this tables. When you want to query the data from multiple days, you can use UNION_ALL.
One option to consider is to create time series tables in DynamoDB where you create a table every day or week in DynamoDB to write every user interaction. At the end of the time period (day, hour or week), you can copy the logs on to Redshift.
For more details, on DynamoDB time series table see this pattern: http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/GuidelinesForTables.html#GuidelinesForTables.TimeSeriesDataAccessPatterns
and this blog:
http://aws.typepad.com/aws/2012/09/optimizing-provisioned-throughput-in-amazon-dynamodb.html
For Redshift DynamoDB copy: http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/RedshiftforDynamoDB.html
Hope this helps.
Though there is already an accepted answer here, AWS launched a new service called Kinesis Firehose which handles the aggregation according to user defined intervals, a temporary upload to s3 and the upload (SAVE) to redshift, retries and error handling, throughput management,etc...
This is probably the easiest and most reliable way to do so.
You can write data to CSV file on local disk and then run Python/boto/psycopg2 script to load data to Amazon Redshift.
In my CSV_Loader_For_Redshift I do just that:
Compress and load data to S3 using boto Python module and multipart upload.
conn = boto.connect_s3(AWS_ACCESS_KEY_ID,AWS_SECRET_ACCESS_KEY)
bucket = conn.get_bucket(bucket_name)
k = Key(bucket)
k.key = s3_key_name
k.set_contents_from_file(file_handle, cb=progress, num_cb=20,
reduced_redundancy=use_rr )
Use psycopg2 COPY command to append data to Redshift table.
sql="""
copy %s from '%s'
CREDENTIALS 'aws_access_key_id=%s;aws_secret_access_key=%s'
DELIMITER '%s'
FORMAT CSV %s
%s
%s
%s;""" % (opt.to_table, fn, AWS_ACCESS_KEY_ID, AWS_SECRET_ACCESS_KEY,opt.delim,quote,gzip, timeformat, ignoreheader)
Just being a little selfish here and describing exactly what Snowplow ,an event analytics platform does. They use this awesome unique way of collecting event logs from the client and aggregating it on S3.
They use Cloudfront for this. What you can do is, host a pixel in one of the S3 buckets and put that bucket behind a CloudFront distribution as an origin. Enable logs to an S3 bucket for the same CloudFront.
You can send logs as url parameters whenever you call that pixel on your client (similar to google analytics). These logs can then be enriched and added to Redshift database using Copy.
This solves the purpose of aggregation of logs. This setup will handle all of that for you.
You can also look into Piwik which is an open source analytics service and see if you can modify it specific to your needs.