I'm trying to run a code in python2.7 on windows os that uses sentiment analysis
from vaderSentiment.vaderSentiment import SentimentIntensityAnalyzer
analyzer = SentimentIntensityAnalyzer()
and I'm getting this error
ImportError: No module named vaderSentiment
Can anyone help me with this?
Assuming you solved this one as it's from 7 months ago, but for anyone else searching for it:
Go into terminal/cmd and paste the following:
pip install vaderSentiment
More info on VADER: https://github.com/cjhutto/vaderSentiment
from vaderSentiment.vaderSentiment import SentimentIntensityAnalyzer
#note: depending on how you installed (e.g., using source code download versus pip install), you may need to import like this:
#from vaderSentiment import SentimentIntensityAnalyzer
read the comment in a code
Try running your file with Python3 instead of just python. Sometimes when you have different pips/pythons installed on your computer you might have vaderSentiment installed in python2 when you need to run it in python3.
Related
Currently I have migrated my python2 django project to python 3 & after conversion to py3 I am getting below kind of error for below code.
from hubarcode.code128 import Code128Encoder
encoder = Code128Encoder(pur_num, {'is_reliable': False})
Trackeback is as below.
from hubarcode.code128 import Code128Encoder
File "D:\my_project\venv\lib\site-packages\hubarcode\code128__init__.py", line 16, in
from textencoder import TextEncoder
ModuleNotFoundError: No module named 'textencoder'
I have tried to search for solution online on google but not able to solve it.
Any suggestions ?
Thanks.
I am able to solve issue by using pyStrich.
First you need to install pyStrich using pip3 install pyStrich and after thatn
What you need to do is just replace from hubarcode.code128 import Code128Encoder with
from pystrich.code128 import Code128Encoder.
I hope it may help others who have been facing same kind of problem.
pip freeze will show it if you have this module installed in your venv
pip install textencoder to resolve problem
I would like to have a script invoke numpy from a c++ embedded python runtime by setting the runtime path to know about the numpy module located within site-packages.
However I get the error:
cannot import name 'multiarray'
from \Lib\site-packages\numpy\core__init_.py on the line
from . import multiarrray
I have tried to set the os.path to be xxx\numpy\core but it still cannot seem to find the multiarray.pyd file during the import statement
I have read through similar questions posed but none of the answers seem relevant to my case.
I am using Python 3.4.4 (32 bit) and have installed Numpy 1.11.1 using the wheel
numpy-1.11.1-cp34-none-win32.whl
python -m pip install numpy-1.11.1-cp34-none-win32.whl
Completed without any errors.
Seems like the failure message maybe more general than just an incomplete PYTHONPATH?
Also think it might be broader than Numpy in that ANY .pyd based package that is imported from the embedded environment will have this problem?
Any help appreciated.
Did you ensure all your NumPy includes: \numpy\core\include\numpy\ were present during the build? That's the only time I get those types of errors was if the build couldn't find all the NumPy includes... although during embedding I found that the numpy entire directory (already built on your build machine) has to be inside a directory under Py_SetPath(python35.lib;importlibs); assuming importlibs is a directory with NumPy inside and anything else you want to bundle.
Seems like the answer was to install python 3.4.1 to match the python34.dll version of 3.4.1.
So I thought I'd toy around and try and learn Kivy, as it looks interesting. I have just started trying to get one of their examples working:
from kivy.app import App
from kivy.uix.widget import Widget
class MyPaintWidget(Widget):
pass
class MyPaintApp(App):
def build(self):
return MyPaintWidget()
if __name__ == '__main__':
MyPaintApp().run()
I get the following error:
C:\Kivy-1.8.0-py2.7-win32>python paint.py
Traceback (most recent call last):
File "paint.py", line 1, in <module>
from kivy.app import App
ImportError: No module named kivy.app
I have installed the latest version of Kivy. I see "app.py in the C:\Kivy-1.8.0-py2.7-win32\kivy\kivy folder.
Also, here is my PYTHONPATH:
>>> import sys
>>> for n in sys.path:
... print n
...
C:\Kivy-1.8.0-py2.7-win32\Python27\lib\site-packages\setuptools-2.0.1-py2.7.egg
C:\Kivy-1.8.0-py2.7-win32\Python27\lib\site-packages\pywin32-218-py2.7-win32.egg
C:\Kivy-1.8.0-py2.7-win32\Python27\lib\site-packages\plyer-1.1.2-py2.7.egg
C:\Kivy-1.8.0-py2.7-win32\Python27\lib\site-packages\kivy_garden-0.1.1-py2.7.egg
C:\Kivy-1.8.0-py2.7-win32\Python27\lib\site-packages\requests-2.2.1-py2.7.egg
C:\Kivy-1.8.0-py2.7-win32\Python27\python27.zip
C:\Kivy-1.8.0-py2.7-win32\Python27\DLLs
C:\Kivy-1.8.0-py2.7-win32\Python27\lib
C:\Kivy-1.8.0-py2.7-win32\Python27\lib\plat-win
C:\Kivy-1.8.0-py2.7-win32\Python27\lib\lib-tk
C:\Kivy-1.8.0-py2.7-win32\Python27
C:\Kivy-1.8.0-py2.7-win32\Python27\lib\site-packages
Any help would be greatly appreciated. Thank you.
I ran into this error message when I named the script kivy.py, because python looks first in the current directory to fill the dependency, so it never sees the real kivy package.
Renaming the script fixed it for me.
The name of the folder or file cannot be kivy or kivy.py. You need to rename it to another name and it will run ok.
So, I figured it out....I was not being very smart. I'm new to Kivy and I'll answer this for anyone else that is as green as I am. You can't just run this as a python program, doh.
Follow instructions [here] (http://kivy.org/docs/installation/installation-windows.html#start-a-kivy-application) and all will be right with the world.
If you installed kivy using pip you need to add the packages to your environment. In Windows Command Prompt do
pip show kivy
~Take note of the Location of the module.
Next you can do 1 of two things.
Configure any python files you write to refer to the location of your module with sys, use this tutorial for more info: https://kivy.org/docs/guide/environment.html
Add the location you found above to your PATH (Windows): https://www.computerhope.com/issues/ch000549.htm
2 Worked for me.
I was also facing the same issue while running sample app.
I followed simple steps given in : https://kivy.org/doc/stable/gettingstarted/installation.html#install-pip
It worked for me.
Create the virtual environment
Activate the virtual environment.
Install Kivy
run your .py file
I know I am too late but I hope this will help others, I just did not run it from the command prompt, I opened the python code in my python shell and then pressed run 'F5' and it worked for me.
If you're using a virtual environment (venv), make sure you're targetting the the correct Python interpreter. See here for how to to change to the venv interpreter in IntelliJ
OS: CentOS 6.6
Python 2.7
So, I've (re)installed Canopy after it suddenly stopped working after an abrupt shutdown. It worked fine immediately after the install (I installed as my default Python). But after one reboot, when I try to open it with /root/Canopy/canopy (the icon under applications no longer works, either), I get the following error:
(Canopy 64bit) [xxuser#xxlinux ~]$ /root/Canopy/canopy Traceback (most recent call last): File "/home/xxuser/qiime_software/sphinx-1.0.4-release/lib/python2.7/site-packages/site.py", line 73, in <module>
__boot() File "/home/xxuser/qiime_software/sphinx-1.0.4-release/lib/python2.7/site-packages/site.py", line 2, in __boot
import sys, imp, os, os.path ImportError: No module named path
I found this link: Python - os.path doesn't exist: AttributeError: 'module' object has no attribute 'path', but both of my os.py and os.pyc were 250 and 700 bytes, respectively. There was another file called site.py which was 0 bytes and site.pyc was about 100 bytes. What are these files? And would deleting them hurt anything (which is what they did)? And why is this happening after reboot? (using reboot command).
I also found this: https://groups.google.com/forum/#!topic/spyderlib/hKB15JYyLqM , which could be relevant. I've updated my python path before with sys.path.append('/..')
My guess is that for some reason os.path isn't in sys.path? and __boot can't find it? But I'm new to Python and Linux and want to know what I'm doing before I go modifying any boot files, paths, etc.
Thanks in advance.
More information (saw that I'm supposed to update new info in an edit to original question. New to this.)
From one of the comments:
This is what I got:
import os.path
import posixpath
os.path
module 'posixpath' from '/home/xxuser/qiime_software/python-2.7.3-release/lib/python2.7/posixpath.pyc'
posixpath
module 'posixpath' from '/home/xxuser/qiime_software/python-2.7.3-release/lib/python2.7/posixpath.pyc'
Looks like os.path is there.
Could this have to do with a permissions error? I have it installed to /root/Canopy/canopy and I found this: docs.python.org/2/library/os.html#module-os (section 15.1.4). Does that make sense?
I'm also not sure if the following is related, but it might possibly. I can no longer seem to update my path with sys.path.append('/file/path/here'). It works until I close the terminal, then I have to re-append the next time I want to call a module from the new directory. Are sys.path and os.path related in any way?
Just fixed this on OSX with:
brew uninstall python
brew install python
No idea why, never seen it in 5 years of working with Python :S
It turns out that I was onto something with my last comment.
I'd downloaded a bunch of biology modules that depend on python, and so many of them came with their own install. When I added the modules to ~/.bashrc, my bash began calling them in advance of my original CentOS install. Resetting ~/.bashrc and restarting (for some reason source ~/.bashrc didn't work) eliminated all of the extra stuff I'd added to my $PATH and Canopy began working again. I'm going to go through and remove the extra installations of python and hopefully the issue will be behind me. Thanks to everyone who posted answers, especially A.J., because that's what got me thinking about .bashrc .
Edit: With some better understanding, this was all because of using python in a virtual environment. Canopy was resetting my path every time I opened it. I'm using a self-installed virtual environment now and have configured my path.
Try seeing if you have posixpath by typing import posixpath:
>>> import os.path
>>> os.path
<module 'posixpath' from '/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/posixpath.pyc'>
>>> ^D
bash-3.2$ python
>>> import posixpath
>>> posixpath
<module 'posixpath' from '/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/posixpath.pyc'>
>>>
I tried looking for an answer to this around the forum/google, but I can't find anything. My issue is this (from python console):
>>> import pandas
cannot import name hashtable
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "C:\Python27\lib\site-packages\pandas\__init__.py", line 6, in <module>
from . import hashtable, tslib, lib
ImportError: cannot import name hashtable //also can't import name NaT somtimes
I ran the windows 1-click installer prior to attempting the import. I'm running everything 32-bit. The pandas installer is for python 2.7.
Here's a list of modules that I have correctly imported into Python.
setuptools
pip
mox
dateutil
six
numpy
SQLAlchemy
I'm on windows 7.
I also have anaconda installed, but that was really just a "hail mary" after I tried everything else. My end goal is to install the ultra-finance module. However, it seems to require pandas, hence me being stuck.
I'm a python noob, so please don't assume I know anything. Thanks.
EDIT: please let me know if I can provide any extra information.
The recommended way to install pandas is via pip:
pip install pandas
This hashtables error arises from the cython files not being built. This error message will be more informative from 0.11.1.
Try running your code in Spyder (Anaconda -> Spyder). It worked for me.
Check that you have python scripts included in your system path variable. In my case I had to add "C:\Python27\Scripts"
I was having a similar problem when downloading Pandas to my Windows 8 system. The first error I had was an egg error, but after installing some packages I think I have the solution.
First look at the previous pip errors with Pandas, make sure you have the most updated pip.
The second part is downloading wheel using
pip install wheel
After installing wheel and having the dependencies for panda and using pip it worked correctly.