Reference
Is it necessary to provide the tenant-admin-UserName & tenant-admin-Password to registerUser()..
Can't it be handled at the super tenant level ?
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ser="http://services.mgt.identity.carbon.wso2.org" xmlns:xsd="http://dto.mgt.identity.carbon.wso2.org/xsd">
<soapenv:Header/>
<soapenv:Body>
<ser:registerUser>
<ser:userName>testSelfUser</ser:userName>
<ser:password>testSelfUser</ser:password>
<ser:claims>
<xsd:claimUri>http://wso2.org/claims/country</xsd:claimUri>
<xsd:claimValue>usa</xsd:claimValue>
</ser:claims>
<ser:claims>
<xsd:claimUri>http://wso2.org/claims/emailaddress</xsd:claimUri>
<xsd:claimValue>testSelfUser#email.com</xsd:claimValue>
</ser:claims>
<ser:profileName>default</ser:profileName>
<ser:tenantDomain>mytenant.com</ser:tenantDomain>
</ser:registerUser>
</soapenv:Body>
</soapenv:Envelope>
UserInformationRecoveryService
As authorization header do we have to pass in the **admin#mytenant.com:************
Related
I've created and saved a search in NetSuite. Now I want to use the same search in SuiteTalk web services call. There is no option to set SavedSearchId neither in CustomerSearchBasic nor in CustomerSearch. So I used CustomerSearchAdvanced as below
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:urn="urn:messages_2016_1.platform.webservices.netsuite.com" xmlns:urn1="urn:core_2016_1.platform.webservices.netsuite.com" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Header>
<urn:searchPreferences>
<urn:pageSize>10</urn:pageSize>
</urn:searchPreferences>
<urn:applicationInfo>
<urn:applicationId>some id</urn:applicationId>
</urn:applicationInfo>
<urn:passport>
<!-- With Credentials -->
</urn:passport>
</soapenv:Header>
<soapenv:Body>
<urn:search>
<urn:searchRecord ns7:savedSearchId = "732" xsi:type="ns7:CustomerSearchAdvanced"
xmlns:ns7="urn:relationships_2016_1.lists.webservices.netsuite.com">
</urn:searchRecord>
</urn:search>
</soapenv:Body>
</soapenv:Envelope>
But I am getting this error from NetSuite server
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Header>
<platformMsgs:documentInfo xmlns:platformMsgs="urn:messages_2016_1.platform.webservices.netsuite.com">
<platformMsgs:nsId>some id</platformMsgs:nsId>
</platformMsgs:documentInfo>
</soapenv:Header>
<soapenv:Body>
<searchResponse xmlns="urn:messages_2016_1.platform.webservices.netsuite.com">
<platformCore:searchResult xmlns:platformCore="urn:core_2016_1.platform.webservices.netsuite.com">
<platformCore:status isSuccess="false">
<platformCore:statusDetail type="ERROR">
<platformCore:code>UNEXPECTED_ERROR</platformCore:code>
<platformCore:message>An unexpected error occurred. Error ID: iufcwwrkjcqii34kqgag</platformCore:message>
</platformCore:statusDetail>
</platformCore:status>
</platformCore:searchResult>
</searchResponse>
</soapenv:Body>
</soapenv:Envelope>
I am not able to get information about error Id : iufcwwrkjcqii34kqgag
Is it possible to use Saved Search in SuiteTalk Web services? If yes, what call and types should I use?
I am using SOAP UI project created using this wsdl
Below is the successfully working SOAP request and what you need to configure the Netsuite Account, Token, consumer key, nonce, timestamp and signature. Use the saved search id (here -7734) to invoke the saved search
<soap:Envelope soap:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:messages="urn:messages_2020_1.platform.webservices.netsuite.com" xmlns:accountingLists="urn:accounting_2020_1.lists.webservices.netsuite.com" xmlns:employeesLists="urn:employees_2020_1.lists.webservices.netsuite.com" xmlns:employeesTransactionsTypes="urn:types.employees_2020_1.transactions.webservices.netsuite.com" xmlns:demandplanningTransactions="urn:demandplanning_2020_1.transactions.webservices.netsuite.com" xmlns:common="urn:common_2020_1.platform.webservices.netsuite.com" xmlns:commonTypes="urn:types.common_2020_1.platform.webservices.netsuite.com" xmlns:accountingListsTypes="urn:types.accounting_2020_1.lists.webservices.netsuite.com" xmlns:customizationSetup="urn:customization_2020_1.setup.webservices.netsuite.com" xmlns:inventoryTransactionsTypes="urn:types.inventory_2020_1.transactions.webservices.netsuite.com" xmlns:filecabinetDocuments="urn:filecabinet_2020_1.documents.webservices.netsuite.com" xmlns:bankTransactionsTypes="urn:types.bank_2020_1.transactions.webservices.netsuite.com" xmlns:communicationGeneralTypes="urn:types.communication_2020_1.general.webservices.netsuite.com" xmlns:customizationSetupTypes="urn:types.customization_2020_1.setup.webservices.netsuite.com" xmlns:supplychainListsTypes="urn:types.supplychain_2020_1.lists.webservices.netsuite.com" xmlns:core="urn:core_2020_1.platform.webservices.netsuite.com" xmlns:coreTypes="urn:types.core_2020_1.platform.webservices.netsuite.com" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:supplychainLists="urn:supplychain_2020_1.lists.webservices.netsuite.com" xmlns:demandplanningTransactionsTypes="urn:types.demandplanning_2020_1.transactions.webservices.netsuite.com" xmlns:websiteLists="urn:website_2020_1.lists.webservices.netsuite.com" xmlns:salesTransactions="urn:sales_2020_1.transactions.webservices.netsuite.com" xmlns:salesTransactionsTypes="urn:types.sales_2020_1.transactions.webservices.netsuite.com" xmlns:relationshipsLists="urn:relationships_2020_1.lists.webservices.netsuite.com" xmlns:inventoryTransactions="urn:inventory_2020_1.transactions.webservices.netsuite.com" xmlns:employeesListsTypes="urn:types.employees_2020_1.lists.webservices.netsuite.com" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:customersTransactions="urn:customers_2020_1.transactions.webservices.netsuite.com" xmlns:schedulingActivitiesTypes="urn:types.scheduling_2020_1.activities.webservices.netsuite.com" xmlns:financialTransactions="urn:financial_2020_1.transactions.webservices.netsuite.com" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:relationshipsListsTypes="urn:types.relationships_2020_1.lists.webservices.netsuite.com" xmlns:employeesTransactions="urn:employees_2020_1.transactions.webservices.netsuite.com" xmlns:faults="urn:faults_2020_1.platform.webservices.netsuite.com" xmlns:marketingListsTypes="urn:types.marketing_2020_1.lists.webservices.netsuite.com" xmlns:communicationGeneral="urn:communication_2020_1.general.webservices.netsuite.com" xmlns:faultsTypes="urn:types.faults_2020_1.platform.webservices.netsuite.com" xmlns:supportListsTypes="urn:types.support_2020_1.lists.webservices.netsuite.com" xmlns:websiteListsTypes="urn:types.website_2020_1.lists.webservices.netsuite.com" xmlns:purchasesTransactions="urn:purchases_2020_1.transactions.webservices.netsuite.com" xmlns:financialTransactionsTypes="urn:types.financial_2020_1.transactions.webservices.netsuite.com" xmlns:schedulingActivities="urn:scheduling_2020_1.activities.webservices.netsuite.com" xmlns:bankTransactions="urn:bank_2020_1.transactions.webservices.netsuite.com" xmlns:marketingLists="urn:marketing_2020_1.lists.webservices.netsuite.com" xmlns:customersTransactionsTypes="urn:types.customers_2020_1.transactions.webservices.netsuite.com" xmlns:purchasesTransactionsTypes="urn:types.purchases_2020_1.transactions.webservices.netsuite.com" xmlns:generalTransactions="urn:general_2020_1.transactions.webservices.netsuite.com" xmlns:filecabinetDocumentsTypes="urn:types.filecabinet_2020_1.documents.webservices.netsuite.com">
<soap:Header>
<urn:tokenPassport xmlns:urn="urn:messages_2020_1.platform.webservices.netsuite.com">
<ns8:account xmlns:ns8="urn:core_2020_1.platform.webservices.netsuite.com">NetSuite Account</ns8:account>
<ns8:consumerKey xmlns:ns8="urn:core_2020_1.platform.webservices.netsuite.com">Consumer Key</ns8:consumerKey>
<ns8:token xmlns:ns8="urn:core_2020_1.platform.webservices.netsuite.com">Token</ns8:token>
<ns8:nonce xmlns:ns8="urn:core_2020_1.platform.webservices.netsuite.com">nonce</ns8:nonce>
<ns8:timestamp xmlns:ns8="urn:core_2020_1.platform.webservices.netsuite.com">timestamp</ns8:timestamp>
<ns8:signature xmlns:ns8="urn:core_2020_1.platform.webservices.netsuite.com" algorithm="HMAC_SHA256">t/WP6f33JePu7rdqtnInwPtJSRIB24RNy3GKhDDpn94=</ns8:signature>
</urn:tokenPassport>
<ns1:preferences xmlns:ns1="urn:messages.platform.webservices.netsuite.com">
<ns2:ignoreReadOnlyFields xmlns:ns2="urn:messages_2020_1.platform.webservices.netsuite.com">true</ns2:ignoreReadOnlyFields>
</ns1:preferences>
<ns3:searchPreferences xmlns:ns3="urn:messages.platform.webservices.netsuite.com">
<ns4:bodyFieldsOnly xmlns:ns4="urn:messages_2020_1.platform.webservices.netsuite.com">true</ns4:bodyFieldsOnly>
<ns5:pageSize xmlns:ns5="urn:messages_2020_1.platform.webservices.netsuite.com">999</ns5:pageSize>
</ns3:searchPreferences>
</soap:Header>
<soap:Body>
<ns24:search xmlns:ns5="urn:filecabinet_2020_1.documents.webservices.netsuite.com" xmlns:ns6="urn:relationships_2020_1.lists.webservices.netsuite.com" xmlns:ns3="urn:common_2020_1.platform.webservices.netsuite.com" xmlns:ns4="urn:communication_2020_1.general.webservices.netsuite.com" xmlns:ns9="urn:sales_2020_1.transactions.webservices.netsuite.com" xmlns:ns7="urn:support_2020_1.lists.webservices.netsuite.com" xmlns:ns8="urn:accounting_2020_1.lists.webservices.netsuite.com" xmlns="urn:core_2020_1.platform.webservices.netsuite.com" xmlns:ns19="urn:supplychain_2020_1.lists.webservices.netsuite.com" xmlns:ns18="urn:demandplanning_2020_1.transactions.webservices.netsuite.com" xmlns:ns2="urn:scheduling_2020_1.activities.webservices.netsuite.com" xmlns:ns17="urn:marketing_2020_1.lists.webservices.netsuite.com" xmlns:ns16="urn:employees_2020_1.transactions.webservices.netsuite.com" xmlns:ns15="urn:website_2020_1.lists.webservices.netsuite.com" xmlns:ns14="urn:employees_2020_1.lists.webservices.netsuite.com" xmlns:ns13="urn:customization_2020_1.setup.webservices.netsuite.com" xmlns:ns24="urn:messages_2020_1.platform.webservices.netsuite.com" xmlns:ns12="urn:financial_2020_1.transactions.webservices.netsuite.com" xmlns:ns23="urn:faults_2020_1.platform.webservices.netsuite.com" xmlns:ns11="urn:customers_2020_1.transactions.webservices.netsuite.com" xmlns:ns22="urn:general_2020_1.transactions.webservices.netsuite.com" xmlns:ns10="urn:purchases_2020_1.transactions.webservices.netsuite.com" xmlns:ns21="urn:inventory_2020_1.transactions.webservices.netsuite.com" xmlns:ns20="urn:bank_2020_1.transactions.webservices.netsuite.com">
<ns24:searchRecord xsi:type="ns13:CustomRecordSearchAdvanced" savedSearchId="7734"/>
</ns24:search>
</soap:Body>
</soap:Envelope>
I want to use the IdentitySAMLSSOService.wsdl to end a session using the doSingleLogout method but I can't find any documentation around. The method asks for a sessionId, the problem is that I don't know where to find that value, I've looking in the SAML Response, headers, etc.
<soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope" xmlns:xsd="http://org.apache.axis2/xsd">
<soap:Header/>
<soap:Body>
<xsd:doSingleLogout>
<!--Optional:-->
<xsd:sessionId></xsd:sessionId>
</xsd:doSingleLogout>
</soap:Body>
</soap:Envelope>
The ouput seems to be the same always with all the values I've tried.
<soapenv:Envelope xmlns:soapenv="http://www.w3.org/2003/05/soap-envelope">
<soapenv:Body>
<ns:doSingleLogoutResponse xmlns:ns="http://org.apache.axis2/xsd">
<ns:return xsi:type="ax2362:SAMLSSOReqValidationResponseDTO" xmlns:ax2360="http://base.identity.carbon.wso2.org/xsd" xmlns:ax2362="http://dto.saml.sso.identity.carbon.wso2.org/xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ax2364="http://util.java/xsd">
<ax2362:assertionConsumerURL xsi:nil="true"/>
<ax2362:destination xsi:nil="true"/>
<ax2362:doSingleLogout>false</ax2362:doSingleLogout>
<ax2362:forceAuthn>false</ax2362:forceAuthn>
<ax2362:id xsi:nil="true"/>
<ax2362:idPInitSSO>false</ax2362:idPInitSSO>
<ax2362:issuer xsi:nil="true"/>
<ax2362:logOutReq>true</ax2362:logOutReq>
<ax2362:loginPageURL xsi:nil="true"/>
<ax2362:logoutRespDTO xsi:nil="true"/>
<ax2362:logoutResponse xsi:nil="true"/>
<ax2362:passive>false</ax2362:passive>
<ax2362:queryString xsi:nil="true"/>
<ax2362:requestMessageString xsi:nil="true"/>
<ax2362:response xsi:nil="true"/>
<ax2362:rpSessionId xsi:nil="true"/>
<ax2362:subject xsi:nil="true"/>
<ax2362:valid>false</ax2362:valid>
</ns:return>
</ns:doSingleLogoutResponse>
</soapenv:Body>
</soapenv:Envelope>
I'm using Identity Server 5.0.0 without SP1. The WebService is built into org.wso2.carbon.identity.sso.saml (4.2.3) and it's exposed in identityserverurl:9443/services/IdentitySAMLSSOService?wsdl.
Thanks in advance.
According to the execution flow, it can be any value. As doSingleLogout method does not consider an actual SAML2 logout request, there is no any validate is happened according to the sessionid value. However, in real SSO signal logout flow, sessionid would be the value of the 'samlssoTokenId' cookie which is set in to the browser. Please note, doSingleLogout method can not be used to send SAML logout request to other session participants. As i know, it can be used to destroy the SSO session in WSO2IS.
Also, you can destroy the WSO2IS SSO session using following way by calling commonauth end point as mentioned in last selection in this
https://localhost:9443/commonauth?commonAuthLogout=true&type=oidc2&sessionDataKey=7fa50562-2d0f-4234-8e39-8a7271b9b273&commonAuthCallerPath=http://localhost:8080/SSOWebApp/&relyingParty=SSOWebAPP
I am working on a camel based cxf-webservice. I have to show all types of error messages in my responses which I am doing properly in my service layer. But if a request is invalidated still I was getting a correct response.
For the following type of request
<soapenv:Body>
...
<!--Optional:-->
<prod:CandidateMaximumQuantity/>
<!--Optional:-->
<prod:CandidatePerPageMaximumQuantity>100</prod:CandidatePerPageMaximumQuantity>
<!--Optional:-->
<prod:CandidateDisplayStartSequenceNumber>1</prod:CandidateDisplayStartSequenceNumber>
...
</soapenv:Body>
In the soap validator i am getting invalid decimal value. expected at least one digit.
After writing the following code in my cxf-context I am able to do the input request validation.
But in the response I
<cxf:properties>
<entry key="allowStreaming" value="false" />
<entry key="schema-validation-enabled" value="${isSchemaValidationEnabled}" />
</cxf:properties>
Where isSchemaValidationEnabled = true.
So I am getting the following response in my SOAP UI.
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
<soap:Fault>
<faultcode>soap:Client</faultcode>
<faultstring>Unmarshalling Error: cvc-datatype-valid.1.2.1: '' is not a valid value for 'integer'.</faultstring>
</soap:Fault>
</soap:Body>
My requirement is to create custom error message, so that I can propagate the SOAP error in to my response.And I can show a format of following message
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<prod:Response ServiceVersionNumber=" " xmlns:prod="****">
<prod:TransactionDetail>
<prod:ApplicationTransactionID>***Request</prod:ApplicationTransactionID>
<prod:ServiceTransactionID/>
<prod:TransactionTimestamp>2015-05-05T05:33:52</prod:TransactionTimestamp>
</prod:TransactionDetail>
<prod:TransactionResult>
<prod:SeverityText>Error</prod:SeverityText>
<prod:ResultID>CM018</prod:ResultID>
<prod:ResultText>No candidates resulted for the given input criteria.</prod:ResultText>
<prod:ResultMessage>
<prod:ResultDescription>List of service interface is not available for the given Service name or Service Version number</prod:ResultDescription>
</prod:ResultMessage>
</prod:TransactionResult>
</prod:Response>
Please someone respond to the query.
I am trying to consume a WS-Security protected webservice but I am facing some problems. It is a CMDBuild webservice. I have read the CMDBuild Webservices Manual, but I had no success consuming it yet.
I used two ways to try to consume the webservices: SoapUI and Java using Apache CXF. I will describe what I have done to try to consume the webservice with both methods.
First of all, I installed the CMDB application successfully and I can access the WSDL normally. If you need to take a look into WSDL, you can see it here. I know that I have to send a username token, but what I don't know is where I have to put the username token and how I do that.
All methods provided in the webservice can be used upon authentication
in the CMDBuild system. The authentication is performed upon the WSS
Username Token profile 1.0 specification with digest password.
Other question is how I can obtain this username token and the digest password. What I have is the application username and password which I use to access the application GUI.
SoapUI
When I try to consume any method of webservice using SoapUI, the response is always the same:
<soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope">
<soap:Body>
<soap:Fault>
<soap:Code>
<soap:Value>soap:Sender</soap:Value>
<soap:Subcode>
<soap:Value xmlns:ns1="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">ns1:InvalidSecurity</soap:Value>
</soap:Subcode>
</soap:Code>
<soap:Reason>
<soap:Text xml:lang="en">An error was discovered processing the <wsse:Security> header</soap:Text>
</soap:Reason>
</soap:Fault>
</soap:Body>
</soap:Envelope>
Here, the XML request (generated by SoapUI):
<soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope" xmlns:soap1="http://soap.services.cmdbuild.org">
<soap:Header/>
<soap:Body>
<soap1:getCardList>
<!--Optional:-->
<soap1:className></soap1:className>
<!--Zero or more repetitions:-->
<soap1:attributeList>
<!--Optional:-->
<soap1:code></soap1:code>
<!--Optional:-->
<soap1:name></soap1:name>
<!--Optional:-->
<soap1:value></soap1:value>
</soap1:attributeList>
<!--Optional:-->
<soap1:queryType>
<!--Optional:-->
<soap1:filter>
<!--Optional:-->
<soap1:name></soap1:name>
<!--Optional:-->
<soap1:operator>?</soap1:operator>
<!--Zero or more repetitions:-->
<soap1:value></soap1:value>
</soap1:filter>
<!--Optional:-->
<soap1:filterOperator>
<!--Optional:-->
<soap1:operator></soap1:operator>
<!--Zero or more repetitions:-->
<soap1:subquery/>
</soap1:filterOperator>
</soap1:queryType>
<!--Zero or more repetitions:-->
<soap1:orderType>
<!--Optional:-->
<soap1:columnName></soap1:columnName>
<!--Optional:-->
<soap1:type></soap1:type>
</soap1:orderType>
<!--Optional:-->
<soap1:limit></soap1:limit>
<!--Optional:-->
<soap1:offset></soap1:offset>
<!--Optional:-->
<soap1:fullTextQuery></soap1:fullTextQuery>
</soap1:getCardList>
</soap:Body>
</soap:Envelope>
Apache CXF
Using Java, I tried with Apache CXF and I generated the classes automatically (wsdl2java). After that, I code a little bit:
public class Main {
public static void main(String[] args) throws MalformedURLException {
Map<String, Object> inProps = new HashMap<String, Object>();
inProps.put(WSHandlerConstants.ACTION, WSHandlerConstants.USERNAME_TOKEN);
inProps.put(WSHandlerConstants.PASSWORD_TYPE, WSConstants.PW_TEXT);
Proxy315Service srv = new Proxy315Service(new URL("http://example.com.br:8080/cmdbuild/services/soap/Webservices?wsdl"));
Webservices services = srv.getProxy315Port();
EndpointImpl jaxWsEndpoint = (EndpointImpl) EndpointImpl.publish("http://example.com.br:8080/cmdbuild/services/soap/Webservices", services);
Endpoint cxfEndpoint = jaxWsEndpoint.getServer().getEndpoint();
WSS4JInInterceptor wssIn = new WSS4JInInterceptor(inProps);
cxfEndpoint.getInInterceptors().add(wssIn);
Map<String, Object> outProps = new HashMap<String, Object>();
outProps.put(WSHandlerConstants.ACTION, WSHandlerConstants.USERNAME_TOKEN);
outProps.put(WSHandlerConstants.USER, "gchaves");
outProps.put(WSHandlerConstants.PASSWORD_TYPE, WSConstants.PW_TEXT);
WSS4JOutInterceptor wssOut = new WSS4JOutInterceptor(outProps);
cxfEndpoint.getOutInterceptors().add(wssOut);
MenuSchema menu = services.getMenuSchema();
System.out.println(menu.getDescription());
}
}
Output:
Exception in thread "main" javax.xml.ws.WebServiceException: Could not find service named {http://proxy.sun.com/}Proxy315Service in wsdl http://example.com.br:8080/cmdbuild/services/soap/Webservices?wsdl
at org.apache.cxf.jaxws.ServiceImpl.initializePorts(ServiceImpl.java:161)
at org.apache.cxf.jaxws.ServiceImpl.<init>(ServiceImpl.java:149)
at org.apache.cxf.jaxws.spi.ProviderImpl.createServiceDelegate(ProviderImpl.java:101)
at javax.xml.ws.Service.<init>(Unknown Source)
at com.sun.proxy.Proxy315Service.<init>(Proxy315Service.java:40)
at com.example.main.Main.main(Main.java:26)
Here is example that works for me:
<soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope" xmlns:soap1="http://soap.services.cmdbuild.org">
<soap:Header>
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" soap:mustUnderstand="1">
<wsse:UsernameToken xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="UsernameToken-2">
<wsse:Username>admin</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">admin</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soap:Header>
<soap:Body>
<soap1:getCardList>
<!--Optional:-->
<soap1:className>Monitor</soap1:className>
<!--Zero or more repetitions:-->
<soap1:attributeList>
<!--Optional:-->
<!--Optional:-->
</soap1:attributeList>
<!--Optional:-->
<soap1:queryType>
<!--Optional:-->
<soap1:filter>
<!--Optional:-->
<soap1:name>Brand</soap1:name>
<!--Optional:-->
<soap1:operator>EQUALS</soap1:operator>
<!--Zero or more repetitions:-->
<soap1:value>HP</soap1:value>
</soap1:filter>
<!--Optional:-->
</soap1:queryType>
<!--Zero or more repetitions:-->
<soap1:orderType>
<!--Optional:-->
<soap1:columnName>Code</soap1:columnName>
<!--Optional:-->
<soap1:type>ASC</soap1:type>
</soap1:orderType>
<!--Optional:-->
<soap1:limit>0</soap1:limit>
<!--Optional:-->
<soap1:offset>0</soap1:offset>
<!--Optional:-->
<soap1:fullTextQuery>*</soap1:fullTextQuery>
</soap1:getCardList>
</soap:Body>
</soap:Envelope>
Although it is too late, this answer may help others.
See this link that explains how to use soapUI to consume ws-security enabled web services. You should just double click on the project (In soapUI) and configure outgoing wss. And in soap message (xml part) you should add wss header as it is described in the above link.
I am trying to retrieve TFS workitems using ClientService.asmx using JavaScript and I am able to access the webservice, however when using the SOAP it gives me following error "TF51612: The query does not contain any groups or expressions.
Parameter name: queryXml"
Below is the code that I am using to access the Workitems:
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header>
<RequestHeader xmlns="http://schemas.microsoft.com/TeamFoundation/2005/06/WorkItemTracking/ClientServices/03">
<Id></Id>
</RequestHeader>
</soap:Header>
<soap:Body>
<QueryWorkitems xmlns="http://schemas.microsoft.com/TeamFoundation/2005/06/WorkItemTracking/ClientServices/03">
<psQuery>
<queryXml>
<Wiql>SELECT [System.Id], [System.WorkItemType], [System.Title], [System.AssignedTo], [System.State] FROM WorkItems WHERE [System.TeamProject] = #project AND [System.WorkItemType] <> '' AND [System.State] <> '' ORDER BY [System.Id] </Wiql>
</queryXml>
</psQuery>
</QueryWorkitems>
</soap:Body>
</soap:Envelope>
Please let me know what am I doing wrong.
Thanks
Your header SOAP must contais informations about your credential, because your query header's is empty so you are not authenticated
Add this with Soap Extension in your Web service, register in config file
After much pain I figured out how to do a proper request to this service. Here is my full request. Forgive me for the formatiing. I am apparently too dumb to figure out how to do a proper list.
Couple of notes...
*the RequestHeader Id field has to be in the format uuid:GUID
*The psQuery element is not actually in Wiql as other web sources have hinted. (Which is you are receiving the error)
*The FieldType for numeric fields is 288
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns="http://schemas.microsoft.com/TeamFoundation/2005/06/WorkItemTracking/ClientServices/03">
<soapenv:Header>
<ns:RequestHeader>
<!--Optional:-->
<ns:Id>uuid:262c6910-8394-11e3-baa7-0800200c9a67</ns:Id>
</ns:RequestHeader>
</soapenv:Header>
<soapenv:Body>
<ns:QueryWorkitems>
<!--Optional:-->
<ns:psQuery>
<Group GroupOperator="And">
<Expression Column="System.TeamProject" FieldType="16" Operator="equals"><String>ProjectName</String></Expression>
<Expression Column="System.AssignedTo" FieldType="16" Operator="equals"><String>Daniel West</String></Expression>
<Expression Column="System.WorkItemType" FieldType="16" Operator="equals"><String>Anomaly</String></Expression>
<Expression Column="System.State" FieldType="16" Operator="equals"><String>Validate</String></Expression>
</Group>
</ns:psQuery>
<ns:sort>
<!--Zero or more repetitions:-->
<ns:QuerySortOrderEntry>
<!--Optional:-->
<ns:ColumnName>System.AssignedTo</ns:ColumnName>
<ns:Ascending>1</ns:Ascending>
</ns:QuerySortOrderEntry>
</ns:sort>
<ns:useMaster>1</ns:useMaster>
</ns:QueryWorkitems>
</soapenv:Body>
</soapenv:Envelope>