Is AWS root storage ephemeral? The documents say they are ephemeral. But, I still can find my files after stopping the instance for some time and reboot it, I can still view my files
When you created your instance, I assume you chose the EBS backed instance. This means that the root device volume is actually an EBS volume, so when the instance restarts, you still have all of your data. If you were to choose the instance-store backed instance, then you would lose your data when restarting.
See http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/RootDeviceStorage.html for more information.
What do you mean by root storage?
Instance Stores are ephemeral. EBS volumes are not.
When launching an instance, if you've selected Instance Store as the root volume, a restart will still retain the data. But a stop and start will delete all data.
If you've selected an EBS volume, the data will be retained.
Related
Obviously, hibernation and stop are two different actions that I can select.
What's the difference?
Benefit of Hibernating over Stopping
The memory state is preserved
Since the memory state is perserved and loaded again when the instance start, this reduce the boot time of the instance.
The long running process can continue without interuption
A great benefit if you have some services that take a great amount of time to fully initialized
Under the hood
The whole hibernation process in visual:
When the instance is in Stopping state, the instance memory is persisted in the instance's EBS root volume, and is loaded again when the instance start.
Reference
AWS Instance Hibernate Overview
From the docs
When you hibernate an instance, Amazon EC2 signals the operating
system to perform hibernation (suspend-to-disk). Hibernation saves the
contents from the instance memory (RAM) to your Amazon Elastic Block
Store (Amazon EBS) root volume. Amazon EC2 persists the instance's EBS
root volume and any attached EBS data volumes. When you start your
instance:
The EBS root volume is restored to its previous state
The RAM contents are reloaded
The processes that were previously running on the instance are resumed
Previously attached data volumes are reattached and the instance retains its instance ID
Read more
TL;DR
When you stop your instance, the data stored in memory (RAM) is lost.
When you stop-hibernate an instance, AWS signals the OS to perform hibernation (suspend-to-disk), which saves the contents from the instance memory (RAM) to the Amazon EBS root volume.
From the charging perspective, AWS does not charge usage or data transfer fees for your instance after you stop it, but storage for any Amazon EBS volumes is still charged.
A practical example
Suppose you want to build a caching layer (e.g. on top of your DB) in an EC2 instance. For such a case, the stop-hibernate feature would be instrumental in persisting storage. It would prevent you from having to manually create scripts to save the RAM data before shutting down the server.
Using ec2 Windows instance with Instance storage (let's say 32GB SSD) - where OS and its settings are stored? Like Program Files, User profiles. Are they all stored on Instance Storage? As far as I understood from other topics Instance storage is not-persistent and doesn't survive shutdowns/terminations. Does that mean I will lose everything under C: drive if I turn it off?
Can I use EBS storage as a default storage for OS (C drive)? Can I map multiple EBS storages to one Windows storage?
If above is true, then I will be charged for the capacity used by OS on EBS instance? It would be around 20GB I believe. Is that correct?
I am quite new in aws, and before paying for such instances or EBS I would like to know how this technical and billing model is working.
Thank you!
The Storage for the Root device is dependent on the AMI (EBS-Backed or Instance Store-Backed) used to launch the instance.
As far as I understood from other topics Instance storage is
not-persistent and doesn't survive shutdowns/terminations.
If the Root storage device is Instance Store, Stopping (shutdown) the instance is not possible. On termination, Both the storage and Instance does not survive. The Instance does not survive once terminated even if the AMI is EBS-Backed, but you can persist the Root Volume by setting the DeleteOnTermination flag set to False.
Does that mean I will lose everything under C: drive if I turn it off?
You cannot turn off (shutdown) an Instance Store-backed instance.
Can I use EBS storage as a default storage for OS (C drive)?
Yes, Choose an EBS backed Windows AMI.
Can I map multiple EBS storages to one Windows storage?
Yes, multiple EBS Volumes can be attached to one EC2 Windows Instance.
If above is true, then I will be charged for the capacity used by OS
on EBS instance?
You will be charged for the total size of the EBS volumes attached to the instance including the Root Device.
It would be around 20GB I believe. Is that correct?
The EBS Volume Size is adjustable. The upper Size limit is 16TiB.
Read Storage for Root Device and Ec2 Root Device Volume
Please spend more time on the AWS documentation, I don't think here is enough to cover all your question.
Only for specify EC2 instance come with attached SSD storage AKA instance storage. Bare in mind that, this instance storage doesn't come with Snapshot capabilities, so you must backup the file yourself. This is mean for people who need fastest disk access to process their data.
Only EBS allow you do multiple snapshot.
You can always create an AMI image for your instance after complete the deployment. AMI image is store inside EBS, so you will not lost the initial instance if you do this, so for new instance, you just trigger load it from AMI.
If you "Terminate" an instance, it will delete the virtual image. There is no way to recover it even with EBS, unless you make a snapshot. However, attached EBS storage will not be deleted.
EBS is calculate by Per GB and give you 1GB x 3 IOPS, with base 100 IOPS given. This is not enough if anyone want to carry out disk I/O intensive task.
We are working with an EC2 instance in Amazon Web Services but we have lost our .pem.
In order to create a new one, we are following this guidance:
http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-key-pairs.html#replacing-lost-key-pair
However, we are a bit worried because of this warning:
When you stop an instance, the data on any instance store volumes is
erased. Therefore, if you have any data on instance store volumes that
you want to keep, be sure to back it up to persistent storage.
We cannot access the instance, therefore we cannot really make a proper backup. Instead, we have make a snapshot of the volumes in Elastic Block Store.
We are wondering if this is enough and we can indeed stop the instance to proceed to the pair key recover or we need to do something else in order not to lose any data.
It depends on the type of instance.
If it's EBS backed you are probably safe to proceed as the volume will be reattached.
If it's instance store backed and you lost access to it you basically have lost what's on that machine.
By the sounds of it it's EBS backed. If it's instance store backed and you later created and attached an EBS volume and used that, you're going to be able to restore/reattach that volume just fine - but it's going to be to another machine.
Depending on how many instances we are talking about you should also be able to take an AMI Image of the running instance which will take snapshot of the EBS but also the exact state of the instance.
However if the instance's root device type is using a EBS backed store all the data should be safe so saving a snapshot and relaunching a new instance with the snapshot should have the data.
Good luck.
I am trying to stop a Amazon EC2 instance and get the warning message
Warning: Please note that any data on the ephemeral storage of your instance will be lost when it is stopped.
My Question
What data is stored in ephemeral storage of an Amazon EC2 instance?
Basically, root volume (your entire virtual system disk) is ephemeral, but only if you choose to create AMI backed by Amazon EC2 instance store.
If you choose to create AMI backed by EBS then your root volume is backed by EBS and everything you have on your root volume will be saved between reboots.
If you are not sure what type of volume you have, look under EC2->Elastic Block Store->Volumes in your AWS console and if your AMI root volume is listed there then you are safe. Also, if you go to EC2->Instances and then look under column "Root device type" of your instance and if it says "ebs", then you don't have to worry about data on your root device.
More details here: http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/RootDeviceStorage.html
Anything that is not stored on an EBS volume that is mounted to the instance will be lost.
For example, if you mount your EBS volume at /mystuff, then anything not in /mystuff will be lost. If you don't mount an ebs volume and save stuff on it, then I believe everything will be lost.
You can create an AMI from your current machine state, which will contain everything in your ephemeral storage. Then, when you launch a new instance based on that AMI it will contain everything as it is now.
Update: to clarify based on comments by mattgmg1990 and glenn bech:
Note that there is a difference between "stop" and "terminate". If you "stop" an instance that is backed by EBS then the information on the root volume will still be in the same state when you "start" the machine again. According to the documentation, "By default, the root device volume and the other Amazon EBS volumes attached when you launch an Amazon EBS-backed instance are automatically deleted when the instance terminates" but you can modify that via configuration.
To be clear and answer #Dean's question: EBS-type root storage doesn't seem to be ephemeral. Data is persistent across reboots and actually it doesn't make any sense to use ebs-backed root volume which is 'ephemeral'. This wouldn't be different from image-based root volume.
For EC2 instance
Stop & Start != Reboot
so for ephemeral storage (Instance Store)
Stop cause data lost
Reboot will not
According to AWS documentation [https://aws.amazon.com/premiumsupport/knowledge-center/instance-store-vs-ebs/] instance store volumes is not persistent through instance stops, terminations, or hardware failures.
Any AMI created from instance stored disk doesn't contain data present in instance store so all instances launched by this AMI will not have data stored in instance store. Instance store can be used as cache for applications running on instance, for all persistent data you should use EBS.
ephemeral is just another name of root volume when you launch Instance from AMI backed from Amazon EC2 instance store
So Everything will be stored on ephemeral.
if you have launched your instance from AMI backed by EBS volume then your instance does not have ephemeral.
refer: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/InstanceStorage.html#instance-store-volumes
The data in an instance store persists only during the lifetime of
its associated instance. If an instance reboots (intentionally or
unintentionally), data in the instance store persists. However,
data in the instance store is lost under any of the following
circumstances:
- The underlying disk drive fails
- The instance stops
- The instance hibernates
- The instance terminates
I've launched an instance of the Basic 32-bit Amazon Linux AMI which has an 8GB volume as it's root device. If I terminate it, the EBS volume is destroyed as well. What I'd like to know is whether or not my data is protected (for example, the apache document root, or MySQL data) if the server crashes? A lot of tutorials seem to indicate that another EBS volume should be created and my data stored on that, but I'm not really seeing why two EBS volumes are needed?
Or is the current setup okay for a web server setup?
Many thanks in advance for your help!
When you spin an EC2 instance up, the root volume is ephemeral - that is, when the instance is terminated, the root volume is destroyed** (taking any data you put there with it). It doesn't matter how you partition that ephemeral volume and where you tuck your data on it - when it is destroyed, everything contained in that volume is lost.
So if the data in the volume is entirely transient and fully recoverable/retrievable from somewhere else the next time you need it, there's no problem; terminate the instance, then spin a new one up and re-acquire the data you need to carry on working.
However, if the data is NOT transient, and needs to be persisted so that work can carry on after an instance crash (and by crash, I mean something that terminates the instance or otherwise renders it inoperable and unrecoverable) then your data MUST NOT be on the root volume, but should be on another EBS volume which is attached to the instance. If and when that instance terminates or breaks irretrievably, your data is safe on that other volume - it can then be re-attached to a new instance for work to continue.
** the exception is where your instance is EBS-backed and you swapped root volumes - in this case, the root volume is left behind after the instance terminates because it wasn't part of the 'package' created by the AMI when you started it.
The other volume would be needed in case your server gets broken and you cannot start it. In such case you would just remove initial server, create a second one and attach the additional storage to the new server. You cannot attach root volume of one server to another.